ITunes64Setup.exe Version 11.1.4.62x64 bleibt "Starting services" hängen! Wie kann dieser Fehler behoben werden?
Problembeginn nach Updateversuch auf Version 11.1.4. Habe PC Windows 7 Home Premium Service Pack 1 64-bit edition.
Ergab zuerst folenden Fehler:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program: C:\Program Files (x86)\iTunes\iTunes.exe
R6034
An application has made an attempt to load the C runtime library incorrectly.
Please contact the application's support team for more information.
Habe darauf das Programm iTunes via Systemsteuerung exstalliert und iTunes64Setup.exe downloaded.
Bei der Installierung bei "Starting services" (iTunes: Ihre gesamte Musik an einem Ort) komt folgender Fehler:
Service 'Apple Mobile Device? (Apple Mobile Device)
failed to start. Verify that you have sufficient privileges to start system services.
<Erneut versuchen> geht nicht
<ignorieren> geht nicht
<abbrechen> ergibt ein Rolling back
Wie gehts jetzt weiter
Hallo!
Ich habe genau das gleiche Problem! Haben Sie schon eine Antwort erhalten? Wie war die Lösung? Könnte ich die auch übernehmen / verwenden?
Bitte Antworten.
Similar Messages
-
Will not install itunes64setup.exe version 10.5.2.11 x64, on Vista
I have Vista x64 home, itunes version 10.5.1.42 x64, runs fine. In itunes I clicked update - itunes software manager downloads & saves one item. Click install 1 item. Brings you right back to the update manager. Does not even try to install. Next I downloaded the itunes64setup.exe file (42.92MB - file version10.5.2.
11 x64) to my desktop. Opened this file, install starts, then I get - INSTALLER ENCOUNTERED ERRORS BEFORE ITUNES COULD BE CONFIGURED. Install attempt ends.
How do I get it to update ?? Either method fails. ?????????
BobI have Windows 7. The new update tried to install and crashed my iTunes. I have never had this probelem with iTunes. I am not sure what is going on over there, but I have been spoiled by the flawless use of iTunes, now, alas, it is failing like other sand becoming unstable and if it keeps doing this after each update, (3rd time now), I am going to dump the whole thing.
Bear in mind, I have had to completely reload this program EVERYTIME a new update happens. The last time, I even had to dump and re-load my iPod. Now, this new update I get THIS ERROR:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2324
There was a time when this app NEVER EVER failed. Getting a little tired of it now. It locks up, shuts down inadvertently, stops during a movie while still playing audio, then after a few minutes, the movie takes off in supper speed motion and catches up to the audio.
Please advise! -
hallo, wie haben auf dem zentralen server die firefox version 19 installiert und die automatischen updates in den defaults/prefs deaktiviert:
pref("app.update.enabled", false);
pref("app.update.auto", false);
pref("app.update.mode", 0);
pref("app.update.silent", true);
pref("app.update.showInstalledUI", false);
die clients haben nur einen link auf das firefox verzeichnis. bisher haben diese einstellungen gut funktioniert aber seit der version 19 gibt es wieder das pop up fenster auf den clients für neuere versionen. wie kann dies verhindert deaktiviert werden?
vielen dank für feedback.Wenn das Öffnen der Datei, die sich auf dem Fileserver nicht öffnen läßt, mit einer Kopie auf dem lokalen Mac funktioniert, dann liegt's nicht an Indesign und der zweite in der Fehlermeldung beschriebene Grund tritt ein. Dann ist das ein Problem des Netzwerk bzw. des OS. Apple wäre dann zu fragen oder der Netzwerkadmin.
-
New 7.6 iTunes64Setup.exe "The installer encountered errors before iTunes..
I am using Vista 64 bit. Used 64 bit IE to download the proper file
iTunes64Setup.exe
from
http://www.apple.com/itunes/download/
But I get this error when I try to install:
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again.
Click Finish to exit the installer.
I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
c:\Program Files (x86)\iTunes
directory (had only one file in there after uninstall), same problem.
FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
Is this a known issue with 7.6 64 bit? Is there a workaround?
There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
I did notice it still installs in the
C:\Program Files (x86)\iTunes
directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously. -
I'm trying to install iTunes64Setup.exe (10.7.0.21) version on my Windows 7 system and nothing happens with I try to run the exe. If I run as admin, I get the UAC dialog andclick ok - and nothing happens after that. When I downloaded the exe, I went to the Properties for the setup file and clicked the Unblock button so to get around some of the other issues that people reported - no luck running. I tried running Microsoft FixIt for installation issues - http://support.microsoft.com/mats/Program_Install_and_Uninstall/ and no luck after that. In all cases, I try to open it - the mouse cursor spins for less than a second - and nothing happens. I don't see any processes running in Task Manager. I've also tried manually starting the Windows Modular Installer and then running setup. I've tried downloading the exe from another computer to see if it was a bad download and both files do the same thing. The size of the downloaded file is 76.7 MB (80,521,624 bytes). I was able to run the same exe from my other computer running Windows 7 64-bit OS.
Help!ok - I setup with a clean boot using msconfig.exe as suggested and disabled all the Microsoft Services and unchecked the Load Startup items, accepted the changes and rebooted. I then tried running the itunes64setup.exe again, and this time - there was a very slight change in behavior - a thin dialog - what looked like a progress indicated displayed on my main display for about .5 sec and then went away - no text in the box. I ran setup again - this time from a USB stick - the little progress indicator stayed up on the screen for about 1.5 sec and I could see a grren bar on the left grow about 1/10th into the progress bar until in disapperared and nothing else happened. What's next?
Thanks,
Bill -
iTunes64Setup.exe, even after multiple times of uninstalling and reinstalling with even a fresh download crashes with the message:
"iTunes has stopped working. A problem [unspecified] caused the program to stop working correctly. Windows will close the program and notify you IF a solution is available." I cannot get out of this loop and it renders my iPad HD useless. I tried calling the Apple Store but was referred by an automated system to this web site. I tried looking up the problem in the FAQ but it didn't help.
merylewHi there Nok Saensanoh,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues
http://support.apple.com/kb/ts1717
-Griff W. -
How do I resolve this issue when I try to download iTunes on my laptop? It fails because of this error message " iTunes64Setup.exe is corrupt or invalid"
That suggests that the installer is getting damaged during the download.
I'd first try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer? -
Log Name: Application
Source: Application Error
Date: 2/26/2014 2:16:26 PM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: SuperFlyXPS
Description:
Faulting application name: msn.exe, version: 10.50.19.1000, time stamp: 0x51ddb7de
Faulting module name: MSHTML.dll, version: 11.0.9600.16518, time stamp: 0x52f365cb
Exception code: 0xc0000005
Fault offset: 0x00175363
Faulting process id: 0x1260
Faulting application start time: 0x01cf32a011d4aeb4
Faulting application path: C:\Program Files (x86)\MSN\MSNCoreFiles\msn.exe
Faulting module path: C:\Windows\system32\MSHTML.dll
Report Id: a1704306-9f33-11e3-acde-782bcbac25e5
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-02-26T22:16:26.000000000Z" />
<EventRecordID>80997</EventRecordID>
<Channel>Application</Channel>
<Computer>SuperFlyXPS</Computer>
<Security />
</System>
<EventData>
<Data>msn.exe</Data>
<Data>10.50.19.1000</Data>
<Data>51ddb7de</Data>
<Data>MSHTML.dll</Data>
<Data>11.0.9600.16518</Data>
<Data>52f365cb</Data>
<Data>c0000005</Data>
<Data>00175363</Data>
<Data>1260</Data>
<Data>01cf32a011d4aeb4</Data>
<Data>C:\Program Files (x86)\MSN\MSNCoreFiles\msn.exe</Data>
<Data>C:\Windows\system32\MSHTML.dll</Data>
<Data>a1704306-9f33-11e3-acde-782bcbac25e5</Data>
</EventData>
</Event>
need help with . . .Hi,
I found a useful link:
MSN has encountered a problem needs to close or MSN is not responding Error
https://answers.msn.com/solution.aspx?solutionid=11abae39-d906-4113-bb4e-ecfaa81798f0
Please take a look of this part
(Common Faulty Module on MSN
Mshtml.dll)
*Instead of MSN, here is a another software called Skype, just instroduce it to you, hope you can enjoy it.*
Yolanda Zhu
TechNet Community Support -
It's really funnt...but I see that it is really happening to many. Has anyone found a solution for this?
Finally, I did wget <url> from my bash shell (on my linux machine) and could download iTunes 11 64-bit for windows 7. Here is the exact command (should be useful as getting the URL is sometimes tricky)
wget http://secure-appldnld.apple.com/iTunes11/031-1547.20131105.FFjvT/iTunes64Setup.exe
I would expect this to work as is even from windows/MAC provided you have 'wget' command on it.
Cheers ! -
I've just finished projects with a bit of animation and some
branching that I facilitated with additional buttons and
duplication. Published for the web it works perfectly. My
instructor (I am a student with a co op in elearning) has asked for
an .exe version to present, and I'm having issues with that. Some
animation is freezing ( made with FLASHCS3 but just simple things
w/little AS3),in addition, the problem that some animation slides
with buttons are proceeding on their own. The navigation I added to
my "review" slides with buttons aren't pausing the animated slides
at all. Most difficult is that the issues vary ( so I can't just
alter certain slides)The branching elements are fussy,too...
sometimes the buttons stick, sometimes the branching is ignored and
a slide plays the next duplicate slide when it shouldn't (it should
branch to a designated slide). The other format works perfectly.
HELP I need a quick fix...I have a fast computer with enough
memory, good graphics card, updated drivers, and updated adobe and
microsoft everything...running vista sp1---So I know It must be
me...How can I get this in shape to run ASAP?
regards,
susanne> I've just finished projects with a bit of animation and
some branching
> that I
> facilitated with additional buttons and duplication.
Published for the web
> it
> works perfectly. My instructor (I am a student with a co
op in elearning)
> has
> asked for an .exe version to present, and I'm having
issues with that.
> Some
> animation is freezing ( made with FLASHCS3 but just
simple things
> w/little
> AS3),in addition, the problem that some animation slides
with buttons are
> proceeding on their own. The navigation I added to my
"review" slides with
> buttons aren't pausing the animated slides at all. Most
difficult is that
> the
> issues vary ( so I can't just alter certain slides)The
branching elements
> are
> fussy,too... sometimes the buttons stick, sometimes the
branching is
> ignored
> and a slide plays the next duplicate slide when it
shouldn't (it should
> branch
> to a designated slide). The other format works
perfectly. HELP I need a
> quick
> fix...
First thing I'd do is take out anything that uses AS3.
Captivate 3 doesn't
understand it ... and who knows, maybe that's messing
everything up for you.
Typical troubleshooting here would be to strip out anything
remotely
'exotic' and publish. If that works, keep adding things back
in until
something breaks.
The easiest way you could approach this might be to
copy/paste your current
project into a new one, one slide at a time, publishing and
testing between
slides. Once you know what bits break your published file it
will be easier
to figure out what needs to be fixed.
HTH
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu -
Nome evento problema: APPCRASH
Nome applicazione: iTunes.exe
Versione applicazione: 11.1.4.62
Timestamp applicazione: 52ddbf7a
Nome modulo con errori: StackHash_1025
Versione modulo con errori: 6.0.6002.18881
Timestamp modulo con errori: 51da3e27
Codice eccezione: c0000374
Offset eccezione: 000b06fc
Versione SO: 6.0.6002.2.2.0.256.6
ID impostazioni locali: 1040
Informazioni aggiuntive 1: 1025
Ulteriori informazioni 2: 491df5c84464b99ef8f61e542b4c9ce4
Ulteriori informazioni 3: 9ade
Ulteriori informazioni 4: 7f7b00bf8397fb6909813f504d7de648Nome evento problema:
APPCRASH
Nome applicazione:
Adobe Premiere Pro.exe
Versione applicazione:
5.0.3.0
Timestamp applicazione:
4ce382d1
Nome modulo con errori:
StackHash_8659
Versione modulo con errori:
6.1.7601.18247
Timestamp modulo con errori:
521eaf24
Codice eccezione:
c0000374
Offset eccezione:
00000000000c4102
Versione SO:
6.1.7601.2.1.0.256.48
ID impostazioni locali:
1040
Informazioni aggiuntive 1:
8659
Ulteriori informazioni 2:
865914f2b0aba0a7f763eb3f160d9c9b
Ulteriori informazioni 3:
5def
Ulteriori informazioni 4:
5defc8630ba14d9bda1ae72188ae0e03@
E' da quando ho istallato il plug-in Heroglift della Pro-Dad
Fino ad ora con istallati: Magic Bullet, New Blue, ProDad Vitascene e Boris non mi aveva dato eccessivi problemi.
Qualcuno ha avuto la stessa triste esperienza? Grazie e spero qualcuno possa aiutarmi -
Hi,
I have Photoshop CS2 9.0 version installed on my PC with patch 9.02. I have a VB application which runs certain action files on EPS/TIF images using Photoshop typelibrary.tlb.The issue is that the VB application hangs when Photoshop crashes with the following error:
"Faulting application Photoshop.exe, version 9.0.2.0, faulting module ntdll.dll, version 5.2.3790.4455, fault address 0x0001bd02"
I also get several other errors when i call Photoshop in my VB application. Those are as mentioned below:
1. The referenced memory could not be read.
2. The remote server machine does not exist or not available.
There is no particular pattern for above mentioned errors. I could not find any help in any of the forums.
I have attached the screenshot of these errors.
Pls advice.
Thanks in advance,
Shobha PatilI to have been getting this error, randomly when I exit the program. Not sure what to make of it google has come up empty for me.
-
Project "Installer Build Product version" vs exe version
Hi,
Can someone help me understand why the "Installer Build" in a project has a "product version", which later shows up in the Windows add/remove programs?
I must be missing something because to me it seems very strange that what they call "product version" in the installer is not automatically linked to the compiled exe version that the installer is built for?
Now I have to try and remember to manually keep these two versions synchronized, and the build 'product version' doesn't even have the same number of fields as the exe version information?!
It's strange when my program splash screen shows "V1.2.0.8" (read by the app by inspecting its own exe) but in the windows add/remove programs, it could say something totally different, such as 1.0.6...
Why is it like this?? How do other people use/handle these various version numbers? -is there a way for my app exe to find what the installed "product version" is?
---Confused...
-QFang
QFang
CLD LabVIEW 7.1 to 2013QFang wrote:
I suppose it helps explain.. Perhaps I just need to think differently about how to name our installers.. Divorce the installer name from the (main) application name, then the difference in version numbers wouldn't be confusing.
Ideally the NI builder would be flexible enough that you could have a "Company Name" as the "installer name" and you could add/remove/maintain the whole company's product list with that same installer, similar to the NI installer.. sounds like a lot of work though.
Thanks for replying!
It does sound like a ton of work! I have to belive it is feasable with TKs like VIPM and Deploy on the market. (A few others I am less familliar with come to mind as well) Niether is exactly what you seem to want but demo that the tech is there!
Jeff -
Faulting application SAP Business One.exe, version 8.80.233.0
Daily the following event id 1000, application error is logged in on my SAP server.
Faulting application SAP Business One.exe, version 8.80.233.0, time stamp 0x4c9ba79d, faulting module ole32.dll, version 6.0.6002.18277, time stamp 0x4c28d53e, exception code 0xc0000005, fault offset 0x00047336, process id 0x6184, application start time 0x01cbe5257b807570.
My server is unexpectedly restarts, i am not sure whether it is due to this error.
Can anyone explain me why this error message is logged, and what is the exact reason for this.
SAP version = SAP 8.8 with patch level 15
SQL Server = MS SQL Server 2005
OS = Windows Server 2008 Enterprise EditionYou may check this: Re: CustomerLibrary - Error during AddOn installation
Thanks,
Gordon -
in windows server 2008 r2 running shany ip surveillance
when i want to playback from record file windows encounter error:The program shany ip surrvilance Playback.exe version 4.0.7.3 stopped interacting with
Windows and was closedHi Koosha,
You should ask this question on
Windows Forums.
Thanks!
If this answers your question please mark as answer. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply.
Maybe you are looking for
-
Right way to connect, submit some SQL, and disconnect using ASP?
I thought I knew how to do this but, with one, low-use web form, we're occasionally losing form submissions and I haven't been able to understand why. The form's processor is in a JSCRIPT "class" so I'll pull out the relevant bits below. I was just a
-
When I am surfing the web other websites pop up saying I need to clean my mac out or I am a winner of something. I just got my Mac so I'm not sure how this happened.
-
How do I check if the ctrl key is pressed from within a mouseReleased actio
How do I check if the ctrl key is pressed from within a mouseReleased action? addMouseListener( new MouseAdapter() { public void mouseReleased( final MouseEvent e ) { // If ctrl button is held down and mouse is clicked, do s
-
Has anyone been successful using the Sony RM-AX4000 remote with the Apple TV. When I try to get the Sony Remote to learn the Apple remote, I get an error basically that the sony isn't picking up the signal from the apple remote. Any and all suggestio
-
Performance issue with RESB table
Hi, User want to improve the performance of a standard program RLLL07SE in which a RESB table data is fetched and take much time on it. The select querry for RESB is, SELECT * FROM RESB WHERE MATNR = MATNR AND WERKS = WERK