ITunesHelper Module error message

Perhaps someone can answer this - I got a 60GB iPod for x-mas. followed the instructions, set up iTunes, downloaded music, etc. iPod charged up and plays great.
Only problem is that now, when I turn my PC on, I always get an error message that reads "iTunesHelper Module has encountered an error", so I have to send Microsoft an error message report. I've put the latest updates in, and I still get the same message every time my PC starts up. If it helps, I have Windows XP, service Pack 2. I just got my PC last July - a Dell XPS with a ton of memory, so I don't think that's the problem.
I've even downloaded the latest update of iTunes tonight - still the same error message when restarting.
so why the messages - I've yet to come across anything regarding this.
thanks,
sheryl

Perhaps someone can answer this - I got a 60GB iPod
for x-mas. followed the instructions, set up iTunes,
downloaded music, etc. iPod charged up and plays
great.
Only problem is that now, when I turn my PC on, I
always get an error message that reads "iTunesHelper
Module has encountered an error", so I have to send
Microsoft an error message report. I've put the
latest updates in, and I still get the same message
every time my PC starts up. If it helps, I have
Windows XP, service Pack 2. I just got my PC last
July - a Dell XPS with a ton of memory, so I don't
think that's the problem.
I've even downloaded the latest update of iTunes
tonight - still the same error message when
restarting.
so why the messages - I've yet to come across
anything regarding this. Still no answers - will click on "debug", but that's not helping either.
any solutions - or is this a glitch in the iTunes system? I did download the latest upgrade 2 weeks ago.
thanks,
sheryl

Similar Messages

Function Module Error Message to appear in Monitor-Detail TAB

Hello ABAP / BW Gurus,
how and can I write an error message in a function module
that it appears in the detail tab of the monitor ?
Thank You
Martin Sautter

OK

Could not load the Enable Async I/O module error message

anyone get this error message trying to load actions in the CC version of photoshop?

You mistakenly copied plugins from a previous version of Photoshop.
You should only copy third party plugins (and optimally, those should be reinstalled instead of copied).
Get rid of the obsolete plugins you loaded by mistake.

Function module error message.

Call Function Z_function.
Imports
Exports
EXCEPTIONS
no_entry_found       = 1
OTHERS               = 2
IF sy-subrc = 0.
     MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
Suppose
if sy-subrc = 1.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
Giving me popup and is troubling.
Could you please tell me if I comment below
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4....
and proceed will it effect me in case of sy-subrc <> 0.
Thank you

Hi Sam,
Yes you can. But some times the programs emphasises specific program errors.
For e.g.
Use the following code for function module for GENEREIC case.
In this case you can remove total piece of code suggested by you. and replace the following code.
If sy-subrc ne 0.
Messae 'Error in function module' Type 'E'.
Endif.
Use the following code for function module for SPECIFIC case.
case sy-subrc.
when '1'.
   Message 'No_entry found' type 'E'.
when '2'.
   Message 'Undetermined error in Function module. Please contact system administrator' Type 'E".
Endcase.
Regards
Bhupal Reddy

Customer Services module - error message no.IW295

Hi experts
Ithe following is an error related to Customer service module in SAP
"Relevance to MRP set at 3, as order released or activated
Message no. IW295"
can any body get solution.
thanks andregards
DSR

Hi,
Kindly refer the below thread:-
Creating Material Reservations with a PM Order
Thanks & Regards,
Rahul Verulkar

"Internal module error" PROBLEM SOLVED ! ! !

At least in my case.
I tried to update my phone (Nokia E50, prod. code: 0536382) with NSU, but I always got the frustrating "Internal module error" message. I spent a whole afternoon trying. After several attempts without any success I accidentally discovered the solution. When the error message appeared again, I noticed, that the small USB icon right below the battery level indicator is gone - so is the connection. How to restore the connection? The NSU says, you should not disconnect the phone, so why the connection interrupts during the update? (I suppose that NSU does the download first and in the meantime nothing happens to your phone. During the download your PC may shut down the USB port to save power. When the download from the internet is done, NSU tries to upload the software to the phone, but there is no connection anymore.) After digging deeply through the Device Manager of my PC, I found an option that turns the USB port off after a while, to save power. That is where the connection goes away.
So, do the following:
1. Go to Device Manager;
2. Under Universal Serial Bus controllers find the USB Root Hub your phone is connected to (assuming you use a USB cable to connect);
3. Double click it and then go to the Power Management tab;
4. Uncheck the option "Allow the computer to turn off this device to save power."
5. Disconnect the phone, reconnect and proceed with NSU.
You should be able to update the phone successfully.
Good luck!

So far the "Internal module error" problem seems to be connection related.
Make sure, you have the Nokia Cable Connectivity Cable driver installed (the later the version the better), if you are using a cable. You may check it out in the Control Panel->Add or Remove Programs.
You also make sure you enter the right Product Code when asked. The following link may help you clarify the fog around the firmware version number:
http://www.noeman.org/gsm/showthread.php?p=104254
It seems there are several versions. Check out the differences and upgrade only if you need it.
As for the USB, in Device Manager got to Universal Serial Bus controllers, and double click every USB Root Hub. On the Power tab you may see the all the devices connected to the specific USB port. Let me know, if you find something out. Cheers.

Error Message "iTuneshelper Module has stopped working"

I downloaded and installed iTunes 7.3.1.3 this morning and am unable to start iTunes. Every time I try, I get the above mentioned error message.
HP a1720n Intel Core 2 Windows Vista

I've just downloaded and installed the very latest drivers from AMD and installed them. Still, I get the "clc.exe has stopped working" errors when I launch PS. I do not get this, or any other errors, when opening or running any other programs, and have never once gotten a blue screen or had any failures in this system for the two or three years it's been running.
While it's remotely possible that there is some error in AMD's latest (and previous) drivers for this video card, what seems to fit the symptoms I have, is that there is some problem in Adobe's code.
Previous versions of Photoshop open and run fine on this system. Other CAD and graphics programs run fine, too, with no crashes, lockups, or failures.
Still, if there's something else that needs to be updated for my video system, to make the Adobe errors go away, I'm open to do whatever updates are necessary. I'm running an AMD Radeon HD 5700 series display adapter, driver date 11/20/2014, version 14.501.1003.0. Device manager says the device is working properly (for whatever that's worth).
The computer is running Win 7 64 bit ultimate. Processor is AMD Phenom II X6 1090T six-core processor. All has been running flawlessly for several years, and continues to do so with every application except Adobe Photoshop 14.501.1003.0.

I moved itunes file to external hard drive and want to move the file on my pc to recycle bin. When I move i get an error message that it cannot delete ituneshelper.dll access is denied. Can I move that file to the recycle bin?

I am trying to free up space on my pc and moving itunes files to external hard drive. I have followed instructions and believe I have file copied to new drive, but I am having trouble moving file to recycle bin as the instructions say. I am getting the following error message: cannot delete ituneshelper.dll:access denied, make sure disk is not full or write protected and file not in use. I know the file is not in use when trying to move. Any help would be most appreciated. I am on Windows XP.

Yes. And you should not have moved that folder. Put it back. To move your iTunes library move the folder from User's Music.
tt2

How to add an error message in the application module?

Hi,
I have some code running in the application module. I want to display error messages in the messages section of the screen if an error happens in my code.
How could I achieve this?
I am using JDeveloper 10G
Thanks

Muhammed,
Have you tried throwing a JboException in your AM code?
John

Why do I get an error message when I tried to switch from Library module to the Develop module?

I've been using my LR3 for a few months but this is the first time that I got an error message when I was switching from the Library module to the the Develop module. I have a macbook pro with 500 GB HD. I am currently using 450 GB already. Anyone have an idea how I can fix this. Thank you.

Should we use our telepathy to figure out error message?

How to set error message inside the loop...module pool

Dear all,
     Am creating Table Control without wizard. In that i am looping the values, that is, Once if i entered 5 digit values means, 12345-08... the values should be stored in z-table like this 12345,12346,12347,12348 . That is 5-8 it as to update in z table. for this i createdloop at itab and inside that i written a code to count the value and all. and also its clearly updating the value in ztable too. now i want to know, if once again i entered the same value means, like 12345-08.. it as to show error messge.I dont know how to set the condition with error message inside the single loop .... Its all comes under module pool program.
Thanks,
Santhosh.R

If i understood your doubt, here goes the answer.
LOOP AT itab INTO wa_itab. " This is your loop
l_tabix = sy-tabix. "l_tabix receives the line of the loop
READ TABLE itab WITH KEY itab = wa_itab. "itab is the same tab of your loop
IF sy-subrc EQ 0 AND l_tabix NE sy-tabix.    "Here the sy tabix have the value of the read table.
*     Here you do your error treatment.
ENDIF.
ENDLOOP.
Explanation: When you are looping your internal table, you use a READ TABLE to see the already recorded registers. If the read table finds one register (sy-subrc EQ 0) and the this register is not the one of the current line (l_tabix NE sy-tabix). It means you have a duplicated register.
Maybe there is someway easier to do this, but this is what i thought now.
I hope this was your doubt hehe.
Thales Schmidt

Module Pool - Error message on a Modal Dialog screen with input

Hello All,
I have a modal dialog screen which is called on F4 help of a input field. This dialog screen has radio buttons on it to select. On selection, we check if the user is authorized to that option. If not, raise and error message with command MESSAGE msgid.....
When the error message pops-up and when clicked ok on it, the radio buttons on the modal dialog screen gets disabled. I want to have the modal dialog box to be able to accept the new radio button as input.
Can anyone please suggest.
Thanks,
Smita

Put all of your Radio buttons in the CHAIN ... ENDCHAIN with one module.
CHAIN.
    FIELD rb1.
    FIELD rb2.
    FIELD rb3.
    MODULE check_chain ON CHAIN-REQUEST.   "<< implement logic in check_Chain
ENDCHAIN.
If you want, you can even disable the options before displaying the screen. Do all necessary checks in the PBO and based on that disable the options.
Regards,
Naimesh Patel

Error message in WAD: "No name is specified for modification type 'Module'"

Hi All,
We have created a WAD template with one analysis item and a button and have single module of type generic module in it.
While executing it following error message is displayed "No name is specified for modification type 'Module'"
Please Can anyone help with this error.
Regards,
Shweta.

Hello,
I am currently facing same issue and I have no idea how to get rid of this message on top of the page.
I'm pretty sure that this error message comes from the ANALYSIS_ITEM define in my Web Template but I have defined alias name for the different modules I created:
Who is able to help ?

Error message for liveupdate engine COM module - Satellite P100

I have a Satellite P100 using Windows Vista home premium, and upgraded cable internet plans with Optus over the weekend to the Fusion89 plan.
Since then internet has been slow to open (up to 25 seconds when I click on a new tab), and attachments are slow to open from E-mails.
I also keep receiving an error message from Microsoft Windows stating "liveupdate engine COM module stopped working and was closed. A problem caused the application to stop working correctly. Windows will notify you if a solution is available".
I have contacted Microsoft who said they would help me for a fee, but as I have the laptop under an extended warranty, they suggested I contact the people I bought it from or Tochiba. Before I contact Clive Peters soes anyone have any comments or suggestions regarding my issues?
Any assistance will be much appreciated.

Try this:
Go to a Command Prompt and run "CHKDSK C: /F"
Run WindowsUpdate / update Internet Explorer
Try disabling your Antivirus software or Firewall software.
If you installed Optus/connection software, update the software.
Ensure the ISP (optus) proxy settings are correct in IE and the email software.

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

HELP! Downloaded LR5 and when open it shows an error message saying error while trying to change from modules and I can not even import photos. Am I doing something wrong?

I have the same problem, and the solutions in Error changing modules | Lightroom do not work. Even uninstalling and reinstalling a new copy did not solve the problem. As anyone got an idea what other lingering files might be causing the problem?

ITunesHelper Module error message

Similar Messages

Maybe you are looking for