Iused to get the "Close and Save?" box.....now I don't...why?

On closing Firefox I used to get a box that allowed me to close the browser but retain my log-ins etc. I no longer get this on the new version...why?

Firefox 4 and later versions save the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
Use "File > Exit" or "Firefox > Exit" (Mac: "Firefox > Quit Firefox") if you want to restore multiple windows or otherwise have problems with restoring tabs.<br />
You can use "History > Restore Previous Session" to get the previous session at any time.<br />
You may need to click the orange/gray Firefox button to see History.<br />
There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />

Similar Messages

  • How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?

    How can I get the "Open" and "Save As" dialog boxes to open at larger than their default size?  I would like them to open at the size they were previously resized like they used to in previous operating systems.  They currently open at a very small size and the first colum is only a few letters wide necessitating a resize practically every time one wants to use it.  Any help would be appreciated.

    hi Prasanth,
    select werks matnr from ZVSCHDRUN into table it_plant.
    sort it_plant by matnr werks.
    select
            vbeln
            posnr
            matnr
            werks
            erdat
            kbmeng
            vrkme
            from vbap
            into table it_vbap
            for all entries in it_plant
            where matnr = it_plant-matnr and
                  werks = it_plant-werks.
    and again i have to write one more select query for vbup.
    am i right?

  • CS5 slow to get the 'open' and 'save' dialog box over networked computer.

    I have been having this problem since the suite was installed, but recently has gotten much slower. Any time I click open or save it takes 8-10 seconds just for the dialog box to come up.  CS1 was lightening fast - I know that was ages ago, but I can't help compare the two.  I have the same problem with InDesign and Illustrator. The suite is running on a Windows 7 machine through a home network, accessing files from an XP machine as well as a Buffalo Linkstation.  Once the dialog box comes up, and I double click, the file is pretty quick to appear.  I have researched online and I believe the problem to be somewhere in the network or the settings.  The network is quick, Windows Explorer has no delay in opening or finding files, nor do other programs outside of Creative Suite. I did an experiment to narrow down the problem - I closed Photoshop, unplugged the network cable, and reopened the program.  AMAZING - it was SO FAST to open the dialog box for both opening and saving files!  I then closed Photoshop again, plugged the network cable back in, and opened Photoshop.  It was back to the slow opening of the dialog box.  Everything else in the programs runs fine - no delay when performing operations in any of the Creative Suite - it has to do with the network and how CS is looking for the files.  Can anyone help me, I am so frustrated - this is adding unnecessary time to everything I do and I dread opening and saving any files!!

    Once again - thank you!
    We used to have a network storage device attached to our home network, but it crashed and we replaced it with another model.  A while back I had added it as an item to display in the places bar.  When we removed it from the network, the link on the left side disapeared, so I forgot all about it.  When I read your posting it jogged my memory.  I searched the subject to remember how I had made the change and found this posting from Adobe Community: http://forums.adobe.com/thread/795196 (its in #6).  I found the original storage device in the places bar, removed it and replaced it with the new device.  I opened Photoshop and Acrobat and both open and save dialog boxes appear as they should - the problem has been resolved!  THANK YOU!

  • TS3297 Every time I open iTunes to listen to music, not access the iTunes Store, I get the password sign in box, over and over again. When I try to access the iTunes Store it does not except my password. This has happened since the last update.

    Everytime I open iTunes to play music, NOT to access the iTunes Store, I get the password sign in box for the iTunes Store. If I click cansel the box pops up a second time.
    When I try to sign in to the iTunes Store it does not except the password and pops up the sign in box afain,and again endlessly.
    This started happening about two weeks ago.

    if itunes will not run, you probably have mangled windows badly
    one feature of windows 8 is the refresh that saves libraries,
    because you are using windows 7, you will need to backup all files to another storage device

  • HOWTO Get the text of "combo box" and "labe" controls with JavaAccessBridge

    HOWTO Get the text of "combo box" and "labe" controls with JavaAccessBridge.
    Please help,
    I'm trying to use the Java Access Bridge (JAB) 2.1 to get the text in Java Applet controls. I've been able to use the sample code in AccessInfo.cpp sample that comes with JAB to get text from "text" controls in a Java Applet. To clarify, I am referring to the "role" in the AccessibleContextInfo struct being set to "text" or "combo box" or "label".
    The problem is, when I use the AccessInfo.cpp sample to get text from a "combo box", the accessibleText data member comes back as FALSE, and thus any of the JAB text functions like GetAccessibleTextInfo fail to get any text information from "combo box" or "label" controls.
    I've also tried GetCurrentAccessibleValueFromContext on the "combo box" and "label" controls, but the text returned is empty.
    Can anyone help?

    I have new information in regards to this issue. A contact from Sun did get to me in email and relayed that that "label" objects store their text in the "name" data member of the AccessibleContext structure. This was a big help.
    But I'm still stuck trying to get information from "combo box" and other controls, like "push button". The contact said, the Java Access Bridge does not provide all the information because it is already implemented by other interfaces like AccessibleComponent, AccessibleAction, or AccessibleSelection. The contact did not allude to whether these opther interfaces can be used along side the Java Access Bridge or not. So, I'm left a step closer to the goal, but still stuck without the full solution.
    Can one take the Java Access Bridge functions, like say those used in the Ferret sample, and close the gap to get text back from "combo box", "push button", and other controls by using some other API in conjunction?

  • Why cant i close and save? so the next time i open firefox the same sites come up.

    Before i installed the latest firefox, a window poped up when i closed firefox asking what i wanted to do. save and close, just close or abort. after the update i only get 2 alternatives close or abort.
    I want the last alternative back so i can close and save, and get the same sites next time i open firefox.

    Firefox now always stores the old session which you can access by going to the History menu and selecting "Restore Previous Session".
    If you always open the last set of tabs, an alternative approach is this:
    # Click the orange Firefox button, then select options to open the options window
    # Go to the General panel
    # Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

  • How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

    How do I get the iCloud to save and sync and upload info from both the devices on my account. Right now I can only do one

    You must put each device on the Verizon cloud.
    Not both lines on one.
    Go and set up a my Verizon account for the second line and you will have Verizon cloud service on that line.
    Oh the term "icloud" is a trademark of Apple Inc. Verizon is not Apple.
    Good Luck

  • HT4859 I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

    I have the error message "Not enough storage. Cannot backup, not enough backup space in ICloud . . . ", but now the "close" and "settings" buttons don't respond and I cant get the IPad to open so I can go change settings. What do I do?

    For a "hard" restart of your iPad just press the home and power button at the same time and hold it for at least 10-15 sec. until it restarts.

  • Get HTML spool and save it as html on a server directory (in batch)

    Hi all,
    I wrote a program which permits to get a spool an send it per mail as attachment or save it as file in a directory.
    It musst be available to start the program in batch mode.
    I've no problem to get the spool (type HTML) and send it via mail with the HTML file as attachment.
    But by getting the spool and saving it in a directory insteed sending it via mail, I've a corrupted file. Does anybody know how to solve the problem ?
    I did following :
    get the spool :
    CALL FUNCTION 'RSPO_RETURN_SPOOLJOB'
         EXPORTING
           rqident              = iv_spool
         IMPORTING
           real_type            = lv_real_type
         TABLES
           buffer               = lt_soli
    * convert the file :
      lt_solix = cl_bcs_convert=>soli_to_solix( lt_soli ).
    *Transfert the file:
        OPEN DATASET lv_dataset FOR OUTPUT IN LEGACY BINARY MODE.
       LOOP AT lt_solix INTO ls_solix.
         TRANSFER ls_solix TO lv_dataset.
       ENDLOOP.
       CLOSE DATASET lv_dataset.
    Some other informations :
    - I do not want a spool in text mode (RAW). I want to get the HTML file.
    - I allready tried to do an open dataset in text mode -> didn't work.
    thank in advance for any advice.
    Fred

    i'm sorry, i'm pretty dumb and missed the change into solix table.
    try give a look here
    Spool to HTML Function Module
    ABAP Utility : Print-Screen to HTML

  • How can I get the peak and valley of a MZI signal

    I am using MZI signal which is similar to sine wave with frequency of 10MHz to calibrate an interference signal. I want to get the peak and valley of the MZI signal and get the corresponding value of interference signal at the same location. The problem is that the MZI signal aquired by DAQ is not smooth, Please see attached filter.PNG, the top left is the MZI, top right is the MZI Zoomed in, you can see that there may be two values that are approximately same to each other. I used a peak detector to detect both the peak and valley and a build array to concatenate them. I am worried that the peak detector may find two peaks or two valleys in a fringe. So I used the filter function in express to bandpass the MZI signal (cutoff frequency is 8MHZ~12MHZ) to smooth the signal, the result zoomed in is  the bottom graph in filter.PNG. But I found that it did not solve the problem but cause phase shift. Is there somebody can give some help?
    Attachments:
    filter.PNG ‏143 KB
    peak detector.PNG ‏69 KB

    I don't know anything about MZI signals, but I do know sine waves.  If this is a sine wave, it is relatively easy to measure its amplitude as long as you know the frequency.  Since you say it is 10 MHz, you appear to know the frequency.  You can use Fourier analysis to determine the magnitude and phase of your signal, as long is it is a steady signal that doesn't change frequency or amplitude.
    Generate a sine and cosine wave using the same frequency.  Divide each wave by the sum of its points.  Multiply each one by your incoming signal and sum all the values, one sum for sine and one sum for cosine.  The sums should be the coefficients of the sine and cosine components of your unknown signal.  The ratio tells you the phase of the signal.  If you multiply the sine and cosine waves by their coefficients and add them together, you should be very close to your incoming signal.  The amplitude of your signal is equal to square root of A*A+B*B, where A and B are your coefficients.
    I may be off by a constant factor here somewhere (probably pi), since I didn't write down the equations and verify them.  These equations are the basis of the Fourier series, though, so they would be fairly easy to find.
    Another option would be resampling.  If you upsampled the data and increased the data resolution by a factor of 10 or so and filtered the results using an FIR filter, you would have a much cleaner signal with a lot more detail.  You wouldn't have any problem locating and measuring peaks and valleys.  This would probably work better with your data, since it looks like it doesn't have a constant magnitude.  To upsample the data, just add 9 zeroes between each data point.  Create a lowpass FIR filter that is based on 10 times the original sampling frequency and has an amplitude of 10.  The cutoff frequency should be half the original sampling rate.  Filter your new data and you should get the same waveform with 10 times the resolution.
    Bruce
    Message Edited by Bruce Ammons on 10-02-2008 09:10 PM
    Bruce Ammons
    Ammons Engineering

  • How To Get The CLOSE Event In a JSP File?

    Hello everybody,
    Right now I am working in a JSP project which is about access log, when the users start , oprate, or close the system, the access log system works. I am in trouble in that when the users close the system, how can I get the close event?
    The JSP file contains the following fields :
    Close Window
    How to add code to get the CLOSE Event and submit to the service?
    And If I hit the "Close Button"(on the right-top of the window), how can I get the CLOSE event, too?
    Can anyone tell me?

    1. Add a hidden field:
    <input type="hidden" id="status" value="">2. modify <a href="index.jsp" onclick ="parent.window.close( );">Close Window</a> with <a href="index.jsp" onclick ="closefn();">Close Window</a>3. Add a javascript
    <script language="javascript">function closefn(){
    document.getElementById('status').value="close";
    document.form.action="";
    document.form.method="post";
    document.form.submit();
    parent.window.close( );
    }4. Now on the action page get the value of status by request.getParameter("status"); and log it.

  • How to get the table_name and its count(*) in a SQL

    Hi,
    Can anybody tell me how to write a sql to get the table_name and its count(*) in a SQL:
    Output should be:
    table_name count(*)
    XXX 261723
    YYY 3343
    Regards,
    G. Rajakumar.

    hello
    there r a lot ways
    i'll suggest u two of them
    1) the following dynamic sql procedure
    DECLARE
    TYPE array_type IS TABLE OF VARCHAR(30);
    TYPE cur_typ IS REF CURSOR;
    c1 cur_typ;
    count1 integer;
    tab_arr array_type;
    querystr varchar2(200);
    begin
    SELECT table_name bulk collect into tab_arr FROM sys.all_all_tables ;
    FOR I IN tab_arr.first..tab_arr.last LOOP
    DBMS_OUTPUT.PUT(TAB_ARR(I));
    querystr := 'select count(*) from ' ||TAB_ARR(I);
    open c1 for querystr;
    fetch c1 into count1;
    EXIT WHEN c1%NOTFOUND;
    dbms_output.put_line(count1);
    END LOOP;
    close c1;
    END;
    2) or use ANALYZE to analyze the tables and get the number of rows in the NUM_ROW column of DBA_TABLES view.
    if u still have any problem mail me at [email protected]
    shalini

  • How to get the Folders and subfolders collection in Project Manager

    Hi,
    I am trying to get the folders and subfolders collection in Project Manager, so that I will be able to loop through the collection and be able to create a project under the appropriate folder.
    Any suggestions?
    Thanks.
    Bhanu

    Anything you do without submitting to form has to be done on the client side (ususally by JavaScript) using data which has been send already from the server.
    With JavaScript you can do quite a bit. You can download tables which don't necessarilly appear on the screen, loading them into JavaScript arrays by dynamically generating javascript. Then you can pick up events like drop-box selection and use these tables to chose what you do next (e.g. preloading other fields, setting drop box content etc.).
    Or, you can cause forms to be submitted when actions like a selection happen without the user clicking a button. It's generally a matter of how much data you'd need to transmit.
    Another posibility is to use a Java applet, which can generate requests to the server and handle the results as it chooses. That are a number of problems with that but occasionally it's the best solution.
    What you can't do is to handle user input inside a JSP. The JSP has come and gone before the user even gets to see your form.

  • How do you get the sender and receiver pics to show up in iMessage

    How do you get the sender and receiver pics to show up in iMessage

    '''If this is a new Pop mail account''',
    Those folders do not appear until you have actually Sent or saved a Draft email.
    check settings:
    Tools > Account Settings > Copies & Folders
    * select: 'place a copy in'
    * select: 'Sent' folder on the mail account
    For Archive
    * select 'keep message archives in:'
    * choose ' 'Archives' folder on mail account
    For Drafts and Templates
    * choose 'Drafts' folder on mail account
    * choose 'Templates' folder on mail account
    * click on OK
    '''If you have an IMAP mail account''',
    you need to make sure you have selected to subscribe to see those folders.
    Then make sure your settings use those folders.
    Tools > Account Settings > Copies & Folders
    * select: 'place a copy in'
    * select: 'Other' and choose the sent folder on the server mail account
    * If you want all Archive, Drafts and Templates to also be saved to the server folders, choose 'Other' and the respective folder on the server mail account.
    * Click on OK to save changes.
    More info on synchronising:
    * https://support.mozilla.org/en-US/kb/imap-synchronization
    Info on IMAP gmail:
    * https://support.mozilla.org/en-US/kb/thunderbird-and-gmail
    I note that you are using a gmail mail account. Please note that the gmail 'All Mail' folder is gmails archive copy of all of your emails, so if you subscribe to see this folder it will double the amount of space used. It is suggested that you do not subscribe to see this folder.
    Read section under 'All Mail':
    * http://kb.mozillazine.org/Using_Gmail_with_Thunderbird_and_Mozilla_Suite

  • HT4061 My orange film to go has gone,when I go to iTunes I get the terms and conditions page but no film , help

    I downloaded an orange film to go, now I can't find it, when I try to download it again I get a message saying code already used. And in iTunes I only get the terms and conditions page

    Hi ... I'm having the same problem .... I've download a film
    From orange films to go , I've check in downloads it's
    Disappeared , I've check in iTunes for the film it's comes
    Up in the grey box that is downloaded .... Just can't find the
    Film to watch it ..... Need extra help please to find it .. I'm
    A very frustrated lady &amp; disappointed that I can't  find this
    Film on my iPhone 4s  ..... Please help please

Maybe you are looking for