IUT220 for Device management

Hi All,
Could anyone please provide me the link from where I can download: "IUT220 for Device Management"
It will be of great help.
Thanks in advance!!
Abhishek

Hi,
Its a 3 days cource.. if you search in Google you can find the old documents...
For your information https://training.sap.com/course/iut220-device-management-classroom-092-us-en/#course-details
Regards
GK.

Similar Messages

Asking for Device Manager to be installed...

I have just installed BB Desktop Software. Never had a problem before, but a dialog comes up saying: Application Loader Wizard requires BlackBerry Device Manager to be installed. Call customer support for assistance. Help!

Hi and Welcome to the Forums!
Since there seems to be so much going on, I suggest the following steps (insert plenty of reboots of your PC...not just restarts, but full power down reboots). Also, it is advised that you be logged into the PC on an account with full admin rights. Further, under Vista, use the "Run As Administrator" option for everything.
1) Remove your device OS update package from your PC (add/remove programs)
2) Cleanly uninstall the RIM DTM software:
KB02206 How to perform a clean uninstall of BlackBerry Desktop Software
3) Get a fresh download of the RIM DTM software:
https://www.blackberry.com/Downloads/entry.do?code=A8BAA56554F96369AB93E4F3BB068C22
Choose the version that is newest and (if applicable) compatible with your PIM (if you are synchornizing via USB):
KB12268 Applications supported by BlackBerry Desktop Manager for synchronization
4) Download (to your PC) a fresh copy of your device OS package from your carrier:
http://na.blackberry.com/eng/support/downloads/download_sites.jsp
5) Install DTM to your PC
6) Install (also to your PC), the device OS package
7) Start whatever you were attempting over again.
Hopefully that will get things going again.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Inncorrect password for device manager?

I'm typing in the correct device manager password and it is saying its inncorrect how do i fix this?

There is not a 'fix'. You must enter the correct password or after ten incorrect attempts, the BlackBerry will wipe itself of all personal data, contacts, messages, etc.
PERHAPS, (because your question is somewhat common) you initially entered your password on your BB and the SHIFT or ALT key was pressed at the time, so try entering with those options.
If not, return to your BB and enter the PW and be cognizant of how you do it to confirm. If you press an alpha key a bit long, it will be capitalized, and perhaps one of yours is which you don't have capitalized when entering in Desktop Manager.
Message Edited by JSanders on 12-27-2008 02:23 AM
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mds95xx device manager for os 5.2.8a and above

Hi
I am looking into Cisco site for Device manager download for os 5.2.8a or above.
Someone can help me?
Many thx
Walter

Hi Walter,
There are two ways to get Device Manager.
(1)Install DCNM and DM will also be installed.
(2)Point your browser at the IP address of the switch and download it from there. Then run the "jxpiinstall.exe" file to install DM. However, to install it from here, you must have Java 1.5 and 1.6 or you will just get a "Certificate Revoked" message.
Best regards,
Jim

Device Manager and Firewall

Is DeviceManager.app a standard app in Mountain Lion, and if so, should it be included as a Login Item in Users and Groups, as it currently is in my MacBook? I thought that was the name in Windows products, and I don't have any Windows OS on my Mac. Also, is it OK to set "deny incoming connections" for Device Manager in my FIrewall? Thanks!

I responded earlier today to your question about malware. I have no idea why the host chose to delete it, but if you will come to the ClamXav Forum I can help you there. Please start with the following detailed information concerning what was found:
To get detailed infomation on what ClamXav has found, click in the top pane of the ClamXav window showing the Infection / File Name / Status to make sure it's in front and type the key combinations command-A, command-C (or choose "Select-All", "Copy" from the "Edit" menu) to copy the information to your clipboard, then come back here and type command-V or choose "Paste" to show us what was found where.

Can't setup Device Management

I've just installed Server 2.2.1 on a Mac Mini that also runs a few other services for me. For that reason, I don't want to format and start clean.
I'm trying to get the Server up and running, but I'm having trouble getting Profile Managerment in place-- in particular it seems to have trouble with enabling device management.
I'd swear there used to be an obvious place to create self signed certificates, but that seems to have moved. The certificates pane lets me create trusted cert requests. I suspect I'd get what I want by showing all certs, and then selecting "add identity certificate". I chose instead to let Profile Manager create it's own certificate.
When I enable Profile Manager it takes me through the intial steps to start up Open Directory. It appears to create a self signed certificate during this part of the initialization.
Later when it asks me to choose a certificate for device management, it lets me choose the self signed domain.private cert and click next, next goes gray, I get a spinny thing in the bottom left corner of the sheet, and then next goes blue again and it acts as though nothing happened. I can't dismiss the sheet, and there is no way to proceed past this point. When I click back, and then cancel, I see that Open Directory was enabled, and the certificate was created.
From this point, it seems to allow me to enable Profile Manager with the Big Switch, but I can't do anything to enable Device Management. I click configure, choose the self signed cert, see the warning that devices are going to have to trust this cert, but the Next button refuses to dismiss the sheet.
In the process of getting to this point, I'd enabled and disabled a few services, created and destroyed a few OD masters, and some users. I don't know if there's something stuck in a bad state-- that seems to happen pretty often with Server.
Any idea what I'm doing wrong here? Is there any way to wipe just Server clean and start again without wiping the entire machine?

Same here. Any resolution? Device manager used to work fine.

How do I reformat an IPod Touch for Windows that has been formatted for a Mac? All instructions I have been able to find use ITunes or Device Manager to reformat. My IPod is not being recognized by ITunes or in Device Manager.

I have an IPod Touch that has been formatted for a Mac. All instructions I have been able to find use ITunes or Device Manager to reformat the device for Windows. This cannot be done if Windows doesn't recognize the device. Is there another way to set the device back to the factory settings directly on the device without using ITunes?

Ipod touch is not formatted one way or the other at all.
Just sync it to the new computer using itunes.
iPod touch User Guide (For iOS 5.1 Software)

My Ipd Nano 6th generation isn't recognized by my computer or iTunes. I've followed all the troubleshooters and have uninstalled and reinstalled iTunes numerous times. I've checked for legacy software under device manager but I keep getting error 10.

My Ipod Nano 6th generation is no longer recognized by iTunes & my computer. I did all troubleshooting steps. After checking for changes and reinstalling legacy software in device manager I keep getting an error 10 message (device can't start). My device is charging when I plug it in and is otherwise still functioning normally. Can anyone help me please?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

I just purchased an ipod shuffle (4th gen.) and I have been working trying to get it running for hours. I have followed all manuals and tutorial help. When I pull up my device manager, it shows an Ipod, but won't let me download the Usb driver.

I just purchased and IPod Shuffle (4th gen.) and can't get it running. I have gone through all of the help available. It shows up in my device manager, but needs a USB driver. It will find it online, but says an error has occurred and access is denied instead of installing. I bought this for a last minute trip with teenagers and I have spent hours on this. I am running Windows 7 and have tried disabling the firewall.
Help, please.

Hello, kcanole.
Thank you for visiting Apple Support Communities.
Here are a couple troubleshooting articles that I would recommend going through when experiencing this issue.
Resetting iPod shuffle
http://support.apple.com/kb/ht1655
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
Restoring iPod shuffle to factory settings
http://support.apple.com/kb/ht1481
Cheers,
Jason H.

[t431s] Code 28 in Device Manager for all external storage.

I'm using Windows 8.1 on a t431s. I'm having this problem where none of my external storage is being recognized. Under "Device Manager" any sort of external storage I plug in ends up under "Other devices". When I click on the device, I get Code 28 "The drivers for this device are not installed." Trying to update the driver brings me nowhere. The devices don't appear under disk management.
What's weird is that other USB peripherals such as mice and USB headphones don't have any problem.
Here's what I've tried so far:
Updated the BIOS.
Used Lenovo's SCCM package for Windows 8.1
Tried installing the individual drivers for each hard drive.
Nothing works! What's going on here?
Thank you in advance for any suggestions.
Solved!
Go to Solution.

Hi, Buggy
After doing a bit of research. It seems your not the only one with this issue. WD has had this issue with even Windows 7 since 2012 with other Passport models.
I honestly recommend seeking support with WD about this issue if you have not done so already as the ones who where able to fix this issue did so with updated drivers from WD.
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Device Manager reported driver missing for Officejet 7310 printer

I used the full-feature install software downloaded from HP site to setup an Officejet 7310 printer on a Lenovo T540p laptop with Windows 8.1 64-bit OS. The install and the printer appear to work correctly as I can print and I can also scan from the HP Solution Center utility. However, the Device Manager reports two errors/anomolies as follows.
Under the "Multifunction adapters" entry the Officejet 7300 series Properties shows the Device Status as:
This device is disabled. (Code 22)
Click Enable Device to enable this device.
Under the "Other devices" entry theOfficejet 7300 series Properties shows the Device Status as:
The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver.
I find this a bit baffling as I believe the install software is supposed to include the driver(s), plus the printer seems to function (which could be due to default Microsoft drivers).
Any thoughts on how things got in this state and how to recover would be deeply appreciated as I prefer to not "ignore" the error messages.
Thanks,
Glenn
This question was solved.
View Solution.

Yes I was able to remove the USB instance and rename the network-connected printer instance as the sole printer. I thought that should work, but I was a bit paranoid given the other weird things that happened with the package install.
I'm good to go; thanks again.
Glenn

My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

Here:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

Yoga 3 Pro driver for ACPI\VPC2004 in Device Manager

Hi all, first post here...
I am re-installing Windows 8.1 and the required drivers for my Yoga 3 Pro (to get rid of Superfish, started the task before the Lenovo tool came out...)
I am almost there, except for one unknown device in the Device Manager, which has a code in its detail of ACPI\VPC2004.
A quick google gives me a link to - Lenovo http://support.lenovo.com/us/en/documents/ht071645 - and a page which says 'Download and run the Energy Management from Lenovo support website with the proper Operating System version. This will install the chipset INF files so that Windows properly recognizes the virtual power controller ACPI/VPC2004.'
All apparently clear. However I am rather unclear on which file on the relevant yoga page ( http://support.lenovo.com/gb/en/products/laptops-and-netbooks/yoga-series/yoga-3-pro-1370-laptop-len... ) I should be using? - I have already installed all of the drivers on that page (other than the intel wireless LAN and bluetooth as the yoga has Broadcomm).
Any thoughts or direction would be massively appreciated!
Thanks!
Solved!
Go to Solution.

It looks like the power management comes from One Key Optimizer. Can you install it and let me know if the driver installs as well? If not, I can extract it from my install.
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗
Tap that kudos button if I helped ^^
←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗←↑→↓↘↙↖↗

HP Device manager for C6100 series on macbook freezes after 1.1.1 update

Okay, I had this same issue on my Powerbook after the hp 1.1.1 update for my C6100 Photosmart printer/scanner and I Googled the answer but didn't save it - I now have the same issue on my MacBook Pro. When I try to scan via the HP Device Manager I get an error "the program may be unstable, it is recommended that the program be closed and restarted"
I know the resolution is to remove the 1.1.1 update but I can't remember how the heck to do this... anyone? Help! I know it's super easy and I'm stuck.
Thanks all!

That doesn't work. I ended up just using the uninstaller and removing the entire thing and then by the CD I reinstalled it again so it doesn't have the update 1.1.1. Of course it asks if I want to update when the updater runs I deselect it. Now I remember there is a simple way to make it skip this update every time too so I don't inadvertently install it again but I don't remember that simple task either.

Some odd warnings and messages for my Helix in the Lenovo Device Manager "Check Up" screen

If I open up the Lenovo Solution Center software, and go to the Check Up tab and select Device Manager, it shows a warning that says "One or more devices have problems", and lists two drivers that show "Unknown device" with a status of "Not installed".
There's no other information and I'm not sure what to make of this. Does anyone else have this issue? If I open up the Windows 8 Device Manager and expand all nodes in the tree, I don't see any devices with warning icons.
Also if I go back to the Hardware Scan button in the Check Up tab, and run it, althought he scan passes, it shows a Warning for the SMART short self test, and notes that the test is "Not supported", with a result code of WHD01V000-WIVZ2I. Is this anything to be concerned about? Note that it's not a failure, but a non supported test. Does anyone else's Helix complete this test?

I have the exact same problem with regard to 2 unknown devices not installed. I got the message after first getting the Helix and running the updates. I called Lenovo support and the tech could not figure it out and her response was "Well if is not causing any problems, I would not worry about it" which sounds like an excuse to just get me off the line. I was in a hurry to get somewhere and so did not push the issue.
The message only says 2 divices not installed, but does not tell you which ones. The tech said that if it was a real problem, the message would tell me what divices are not loaded.
I have seen another post or two from people with the same issue but not suggested fixes.

IUT220 for Device management

Similar Messages

Maybe you are looking for