IV to post with Tax amount more than base amount
Hi Gurus,
One of our user want to post Invoice, with Tax amount more than Net value of goods.
Net amount of goods is 31.45 NZD, where as Tax amount is 99.43NZD.
Tax code assigned to PO is with 12.5%.
System is not allowing to post tax amount more than 12.5% of base, as tax code is assigned.
Kindly let me know, how we can post IV with more tax amount.
Thanks In advance
Hello
I dont know if tax code is assigned for 12.5 then why does he wanat to post more tax. its not correct.
then also for reason u wnat to post then for posting that invoice go to FTXP and change the tax % in such a way that tax amount will match ur requirement
may be 316% so that the sustem while doing invoice willtake thie % and calculate tax
then again change the tax code % to 12.5
or
IN miro only u have a GL tab, i n that GL tab u can add tax gl account and add the tax amount so that it will come what u want .
if gl tab is not comming then active it in
spro--mm --logistic invioice ver incoming invoiceActivate Direct Posting to G/L Accounts and Material Account
hope this helps
Reward accordingly
Message was edited by:
Umakant Bhangale
Similar Messages
-
Why the apple store taken more amount more than the amount written on their prices? Is there any one who can help me to contact the apple customer services. Thanks!
Some country's might not include tax in their prices, and if you changed or added your credit card details whilst making the purchase then a small temporary holding charge may also have been placed - in which case that should disappear within a few days (http://support.apple.com/kb/HT3702). Some apps also then allow you to make in-app purchases (though you can disable that via Settings > General > Restrictions)
-
System is allowing to post the Adv Pmt amount more than the PO Value
Hi Experts,
I am FICO Consultant. I facing one problem regarding Advance Payment. We have a process to for making advance payment with reference to Purchase Order and Purchase Order Line Item. But system is allowing to post the advance payment amount more than the Purchase Order Value. I want to prevent this to happen. The system should not allow to make advance payment more than the Purchase Order value.
Please help me on this issue.
Thanks in Advance and Regards,
Alkesh MistryHI
Please create the Advance payment request with PO number using sp gl indicator as F and then make the advance payment using the request.
Regds
Rajiv -
Subcode cost posted more than budgeted amount.
Hello PS Experts,
I have one query regarding we budgeted one subcode 4000 usd on 11/03 after user suplmented 8000usd on 23/03 but when he was supplemented wbs suplement status is inactive, after that user posted more than budgeted amount 30000 usd.
When we are checking report it is showing minues 18000 value because in budgeted status assigned value is 30000 distrivuted value is 12000.but when i am checking subcode availabity activation or not,it is showing activated.
If budget availability control is activated system can not be allow to post more than budget?
But if am checking cj20n status 23/03 budget supplement is inactive.
How the user inactive the supplement budget,?
May be the reason system allowed to posting more than budget.Anybody can share your valuable inputs.
Regards,
Nivas.Hi Srinivas,
Please do the following:
1. Check your settings for Tolerance Limits for AVAC.
2. Check if any cost elements are maintained for exemption list from availability.
3. Check the Availability analysis report using CJ30. And see if any cost is getting posted using Cost Elements which are in Exemption list.
4. Check how the postings were made to the WBS where you have more actual cost then budget? Is the tolerance limit setting maintained for all targets or some selected ones..
Hope it helps you..
Cheers
Sammar -
Information message "Down Payment more than invoice amount"
Hi Experts,
After creating down payment request while making down payment,one information message shows in status bar "Down Payment amount is more than invoice amount"
can anyone tell me why that message popup everytime?
Thanks in advance
SanjayDear,
Ideally this message should appear at the time F-54 transaction when down payment is greater or lesser than invoice amount.
But as you said it is appearing at time of F-48 so please check purchase order is entered and invoice has been done for that invoice with variances.
If query does not belong to any of above, please elaborate the scenario and also provide message number.
Regards,
Chintan Joshi -
Dear experts.
I have created PO and GRN also done, both are correct but in MIRO i am getting more than PO amount.
Please guide how it is picking more amount in MIRO.
For ref pls find the below screen shot.
PO
GRN
MIRO
Thanks in advance.Hi,
Thank you for valuable reply..
Same material of another PO,
PO-Non deductible tax is 8248.28,
i have got 1 doubt here 2434.28 only picking in MIRO tax rate (CST against c form)(Pls check both screen shot)
MIRO entries of above PO
Non deductible tax is 8248.28 -2434.28 = 5814 (i need, total 8248.28 tax should come in MIRO tax tab that is we are paying to vendor)
May be i have done wrong tax procedure..what could be changes required in the Tax procedure. -
Recurring Posting with Tax Code
Hi Experts,
When i am trying to execute a recurring posting with some Tax Code system is giving error "location is missing".
So kindly tell me is it not possible to execute a recurring posting with tax in SAP Business one
Thanks in AdvanceHello,
You should try directily select your reccuring template on JE form, because form also have Location fields in header and row level.
Actuly tax info(Sales tax information) totally depend of what is location you have selected.
then you will find easly your issue.
Thanks
Manvendra Singh Niranjan -
Taking too much time for saving PO with line item more than 600
HI
We are trying to save PO with line items more than 600, but it is taking too much time to save. It is taking more than 1 hour to save the PO.
Kindly let me know is there any restriction for no. of line items in the PO. Pls guide
regards
SanjayHi,
I suggest you to do a trace (tcode ST05) to identify the bottleneck.
You can know some reasons in Note 205005 - Performance composite note: Purchase order.
I hope this helps you
Regards
Eduardo -
Transfer order craeted with a quantity -- more than delivery quantity
Transfer order created with a quantity more than the delivery quantity. I have tested in several ways but didn't get the root cause for it.
Any possible ways available to create a TO like this????????Hi Aktar,
You have not mentioned the type of TO. Where did you get this scenario. was TO created Manually or Automatically? please confirm.
Anyway incase of manual creation of TO, User keyin quantity enters morethan delivery quantity, then there is a chance of excess picking compared to delivery quantity. but this is only possible if the sufficient SKUs are available at this time.
please let me know.....
Regards
Venkat -
F-32 Partial payment amount greater than net amount
Hi Experts,
We have recently a problem in clearing up payments in F-32. When we double-click the item under Partial Payment Tab, the warning message displays "Partial payment amount greater than net amount" then the value in the Payment Amount Column becomes negative. The users need to activate 2 separate entries for partial payment but instead of . How can we do this?
We have to post like this in partial payment under same customer:
20090820 1400005790 DZ 19 20.08.2009 20.08.2009 5,000.00- 1,295.12
20110225 1400010330 DZ 19 25.02.2011 25.02.2011 2,000.00- 1,295.12-
So the the Assigned Value should be zero to post.Thanks @Atif. Ok so now I understand that the "Total Difference Posting" amount inf-32 will create the new amount of the residual payment with Document Type AB.
Now with the Warning Message "Partial Payment Amount greater than the net amount", this is in a overpayment amount that is reflected in transaction F-32, here are the entries:
Assignment Doc Num Doc Type Post Key Net Amt Partially Paid Amt Payment Amt
2133004220 90005448 RV 01 3,707.02 3,305.71 401.31
2133015007 90020098 RV 01 7,836.68 6,737.25 1,099.43
2133016757 90022362 RV 01 10,521.31 8,603.87 1,917.44
2133137046 90187172 RV 01 11,367.68 0.00 11,367.68
2133137047 90187173 RV 01 1,354.09 0.00 1,354.09
2133137048 90187174 RV 01 1,739.82 0.00 1,739.82
2133137049 90187175 RV 01 994.57 0.00 994.57
20110419 90187176 RV 01 6.42 0.00 6.42
20110421 90187177 RV 01 44.94 0.00 44.94
20110425 90187178 RV 01 19.26 0.00 19.26
20081216 1400003657 DZ 19 3,421.86- 3,394.04- 27.82-
20081222 1400003706 DZ 19 1,000.00- 1,033.17- 33.17-
20090310 1400004396 DZ 19 420.51- 401.25- 19.26-
20090630 1400005319 DZ 19 786.13- 705.94- 80.19-
20090702 1400005349 DZ 19 596.04- 535.88- 60.16-
20090820 1400005790 DZ 19 5,000.00- 6,295.12- 1,295.12-
20090824 1400005827 DZ 19 308.16- 295.32- 12.84-
20091027 1400006377 DZ 19 400.72- 375.04- 25.68-
20091215 1400006796 DZ 19 349.89- 337.05- 12.84-
20100608 1400008253 DZ 19 200.09- 189.39- 10.70-
20101019 1400009279 DZ 19 165.85- 155.00- 10.85-
20101019 1400009280 DZ 19 254.65- 238.00- 16.65-
20101019 1400009281 DZ 19 160.64- 157.00- 3.64-
20101130 1400009595 DZ 19 10,000.00- 5,440.92- 4,559.08-
How is this possible that Document numbers 1400003706 and 1400005790 has overpaid amount. And both of them are downpayment documents? Is there any way I can clear them with the Invoices, I am also lost with this kind of scenario? -
Payment amount greater than net amount!
Payment amount greater than net amount! , i am receiving this error while doing partial payment.. plz help
Also reversed documents are not coming in partial payment tab in F-53 but it is showing as a open item in vendor balance...../hi,
First of all Check ur Clearig GL i.e Bank /Cash in that Relevant to cash Flow is ticked or not.If not ticked then tick it and then try again.
thanks
deepa -
Creating query with a criteria(constraint) on amount more than x dollars
Hi experts,
I have an user requirement where I want to see all the transactions for a particular GL account range (expenditures) which were above 5000 dollars. I am using the new GL cube and ods.
How can I define like this query, can we have such a varaible at the intial varaible screen where the user can say everything more than 5000 dollars?
Thank you,Hi Raj,
In addition to Ravi,
You can also create a variable for the value - in your case its 5000.
To make more dynamic ( may be later in future they want to see results above 6000), you can create variable which the user may fill up during query execution.
You will find the option to create variable just below where you will enter the values in condition.
Assign points if Helps !!
Above feature was available in BW 3.5, now when i checked in BW 7, i dont find this feature, can anyone let me know how to implement above senario in BW 7.0.
Regards,
Naveen Rao Kattela -
How to prevent invoice enters more than PO amount
hi,
how to prevent an Invoice verification being key in the system for more than the PO amount? meaning when invoice has been done for particular PO and there no outstanding amount for this PO. while users try to enter this PO # in the MIRO, system shouldn't allow it to be entered again. maybe promotes with error msg saying that this PO# has being fully performed! etc..
anyone knows how to do that? thankshi,
Actiavte duplicate invoice check..
Make settings at :
SPRO >> MM >> LIV >> Incoming invoice >> Check for duplicate invoice >> here make the indicators ticked as per your requirement and then,
Do also tick the duplicate invoice check indicator at VMR...
and then try...
System will not allow...
Regards
Priyanka.P -
Error while posting with Tax code
Dear All,
I am getting the following error while i am trying to post with a tax code. Can someone tell me what could be the issue?
Customization for RIL j_1iindcus missing in table
Message no. 8I303
Diagnosis
The customization details have not been maintained for this company
Procedure
Please use the localization IMG or Global settings
to maintain the company settings
Regards
SureshDear Suresh,
If you are using versions below 4.7 execute T_Code <b>J1IT</b>, go to <b> India Localization Menu->Global Settings->Company Settings</b> and add an entry for your Company Code and save.
If you are on higher versions use the following path:
<b>SPRO --> Logistics - General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Company Code Settings.</b>
This should solve the issue.
Kindly let me know if it was useful.
Regards,
Mary Sofia -
ORA-01704:String literal too long with update of more than 4000 chars
Hi,
I want to update a table column in Oracle Database(version 10) with more than 4000 chars.
The datatype of the table column is NCLOB.
I want to achieve this with one single line of update query as below,
update mytable set MY_DESCRIPTION = 'longdesc' where ID = '111' ;
But there's a problem, if the 'longdesc' is more than 4000 chars, it gives the error , "ORA-01704:String literal too long"
How can I achieve this in sql developer ?
I dont want to do this using stored procedures, I want to do this update using only sql statement.
Please help.
thanks,
sudhakarHello Sudhakar,
I am afraid, this will never work by SQL.
Just because an SQL-Statement must not contain a string literal over 4,000 characters (or did that change lately?).
Maybe you can bypass the limit with PL/SQL ... but you will certainly run into the 32K limit sooner or later
regards
Peter
Maybe you are looking for
-
Can not scan from computer, but can print
Since a few weeks I'm not able to scan anymore from my computer using HP Scan. I still can print from my computer. It doesn't matter if my computer is connected to my network by Wifi or by wire. My printer is connected to the network by wire. Scanni
-
Going to a particular page when logged off
How can I control what page to go to when I hit the logged off icon or link? I know how to set the default page after logging in, but what I don't know is how to set the default logged out page? Can anybody help me with this?
-
How do I delete/remove an app from phone after ios7 update?
I updated my iphone 4 with the ios 7 update. all my current app icons are missing. I want to delete/remove one of them completely from my phone but I cannot figure out how?
-
Counter increases and decreases by 1, records count nonnegative integer and tests whether the current count value is zero. No method allows the value of counter to become negative. Can anyone assist?public class Counter private int count; // definiti
-
This issue I got when I update InDesing CC. There was an error installing this update. Please quit and try again later. Error Code: U44M1P34