Ive bought an Airport Time Capsule. trying to get it to work with BT home hub 3

Ive followed the advice on this forum but I still cant get the Capsule to connect to the internet.
Ive set the Capsule as a bridge.
Connected the ethernet cable from the Capsule to the Ethernet port on the back of the BT homehub 3.
the light on the front of the capsule still flashes yellow.
so I have a back up made, but in order to get it to work, i need to switch between the wireless network on the homehub (where I have internet connectivity) and the Capsule wireless network (where there is no internet connectivity)
what am I doing wrong?
thank you.

That is odd. Normally with bridge you will have no issues with internet.
Is the ethernet light on, both on the TC and HH3.. the little light next to the port.. or it might be on the main panel of the HH3.
Find out what the error messages are by opening the airport utility and click on the TC.

Similar Messages

  • I have just bought an airport time capsule and im trying to install an airport utility. I tried the 6 version but it wd not load because it said might mac would not support. I then tried the 5.6.1. and it said it would not work with airport capsule.

    I have just bought an airport time capsule and i am trying to install an airport utility programme to support this
    However, it seems the version 6 which came out last year - i can't use on my Mac - Snow Leopard -
    So tried to then install version 5.6.1 and although this installed properly, it says this will not support my capsule
    2. I have BT home hub 2. I presume I cannot bypass this as the internet router? I bought the time capsule for its capability to back up . The router was a byproduct. But am I correct in thinking that it acts as a secondary router or a booster rather than a primary router . I still need the BT homehub?
    if anyone can help that would be great
    CS J

    You should either return the Time Capsule or upgrade your Mac at least to OS X 10.7.

  • I have a Power Mac G4 and i am trying to get it to work with my LCD

    I have a Power Mac G4 and i am trying to get it to work with my LCD Monitor/TV. The connection on the computer is DVI and the connection on the Monitor is DVI. The Monitor says in the manual to hook up computers using the DVI connection. When I connect the too the monitor says there is no video input. I tried changing the settings on the monitor from PC mode to DVI mode and nothing. I have also tried changing the display on the computer to a couple of different settings and nothing. Please Help?

    Hi-
    A little more info please.
    What model G4?
    What Graphics card?
    What OS?
    What model/make of monitor?
    G4AGP(450)Sawtooth, 2ghz PowerLogix, 2gbRAM, RaptorSATAATA, ATI Radeon 9800   Mac OS X (10.4.8)   Pioneer DVR-109, 23" ACD, Ratoc USB 2.0, QCam Ultra, Nikon Coolscan

  • HT1178 I just bought an Airport Time Capsule. I already have a AirportExtreme for my wireless network for my home. Which would be better; connect the time capsule up to the extreme or use it as the primary base station?

    Is it better to connect my Time Capsule up to my existing wireless network or use the Airport Time Capsule as the base unit and start over again by creating a new network?

    There is no end of answers to this..
    But if you want AC wireless.. assuming you bought a new TC.. and the Extreme is the older N model.. then simply make sure the TC is as close as possible to where wireless AC client will be used.. and connect it back to the main router whichever that is, by ethernet.
    If both are AC then it will make no difference.
    As long as you can connect them both by ethernet and not use wireless extend.. it won't make much difference.
    The worst case is where you use wireless extend and expect high speed but totally lose it because of your bridge link.. if that is the case you wasted your money and you can return the TC and buy a hard disk and plug it into the AE.

  • Anyone tried to get Jabber to work with Domino for contact search

                       I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

                       I have a customer who has recently upgraded to CUCM 8.6.2.22900-9 and Presence 8.6.4.11900-1 fom CUCM 6.x and Presence 6.x. When they were at 6.x they were able to integrate CUPC contact search with Domino server. I realize this was not supported, but they got it to work. Now they want to attempt to get Jabber to work with Domino. Again I realize that is not a supported LDAP for Jabber, but I was wondering if anyone has perhaps tried this and what their experience was.

  • Just Tried To Sign Up To BTFon With My Home Hub?

    I just tried to sign up for BTFon via my home hub but it asked me to put in my bt internet email address and password and I really don't remember getting any paperwork or emails with my bt address or setting one up myself? How do I find out what my username is or if i'm even signed up for bt email?

    Use Live Chat
    They will be able to remind you of your primary e-mail address.
    You can also go here http://btsupport.custhelp.com/app/answers/detail/a_id/8517
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Trying to get PM to work with our upgrade process

    We are trying to get Personality migration working properly in our
    environment to migrate our users from 2000 to XP. We have been able to
    get the files to migrate properly, but are having issues with the
    application settings. We have installed PM from Zenworks 7 which is the
    Computer Associates version. When we are setting up the template in the
    application area, there does not seem to be anything there. For example,
    how do we set PM to gather the IE settings but not gather the proxy
    settings? Also, where would I find better documentation on this product?
    THanks in advance for any help.
    Brian

    Brian,
    It appears that in the past few days you have not received a response to your
    posting. That concerns us, and has triggered this automated reply.
    Has your problem been resolved? If not, you might try one of the following options:
    - Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
    - Check all of the other support tools and options available at
    http://support.novell.com.
    - You could also try posting your message again. Make sure it is posted in the
    correct newsgroup. (http://support.novell.com/forums)
    Be sure to read the forum FAQ about what to expect in the way of responses:
    http://support.novell.com/forums/faq_general.html
    If this is a reply to a duplicate posting, please ignore and accept our apologies
    and rest assured we will issue a stern reprimand to our posting bot.
    Good luck!
    Your Novell Product Support Forums Team
    http://support.novell.com/forums/

  • Trying to get 3d to work with xbr70x850b and bdp-s7200

    have new xbr70x850b and new bdp-s7200.  Using Exodus to experiement.  BD says disk is 3d.  tv lets me into 3d menu so it seems to think the feed is 3d.  but none of the menu items (side by side, over/under) are present.  Glasses are registered and turned on.  BD connected directly into tv with new hdmi cable.  Have tried lots of setting changes on tv and bd, but can't get any of the 3d menu options to appear on tv.  3d works with streaming samples from youtube.  Just not with BD. Any hints?  very frustrating. 

    Ok I have been following the instructions supplied on this website http://www.zentus.com/sqlitejdbc/usage.html.
    I have downloaded the jar and the dll file and have placed them into the same folder as my jar file. Then as it says I enter into the command line:
    "java -cp sqlitejdbc.jar - Djava.library.path=. - jar CBL_Program.jar" and I get this:
    Exception in thread "main" java.lang.ClassNotFoundException: org.sqlite.JDBC
    at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
    at java.security.AccessController.doPrivileged(Native Method)
    at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
    at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
    at java.lang.Class.forName0(Native Method)
    at java.lang.Class.forName(Class.java:169)
    at cblprogram.Main.main(Main.java:28)
    Which seems to be the same exception as when I run the program from netbeans.
    I am really stumped on this one, please can someone help.

  • Just bought a airport time capsule because my mac book pro start up disk is full. How can I put stuff onto the airport now from the MacBook Pro to free up some space?

    http://www.prking.com.au/Products/StairLifts/StannahStairliftsCurved/Description Features.aspx

    Yes, look in your Finder's sidebar under Shared, you should see the TC there. Connect to it using whatever password you set up when you first configured the TC, and then you can move files into the shared volume.
    Don't forget that only one copy of a file is not a backup, so ideally you would have a second copy of your files somewhere else.
    Matt

  • Trying to get MySQL to work with Oracle Tutorial

    Hi,
    I was attempting to work through the following tutorial Build a Web Application with JDeveloper 11g Using EJB, JPA, and JavaServer Faces
    http://www.oracle.com/technology/obe/obe11jdev/11/ejb/ejb.html
    But with a twist that I want to attempt with MySQL. Whilst MySQL is working fine in the IDE when I test the javaServiceFacade it fails as the construct/syntax of the sql command is incorrect :-
    SELECT rowid, contractno, fax, advert, status, remark, tel, kva, lastuser, createddate, type, postcode, contact, country, modified, refno, address, email, custname FROM "enquiries" WHERE (refno LIKE ?)")
    You note the "enquires" which for mysql should not have the quotes and is causing error.
    I have looked at persistance.xml and it looks ok. Even tried setting database to MySQL4
    Any suggestions to what controls the SQL syntax?
    James
    excerpt from persistance.xml
    +<properties>+
    +<property name="eclipselink.target-server" value="WebLogic_10"/>+
    +<property name="javax.persistence.jtaDataSource"+
    +value="java:/app/jdbc/jdbc/main_MySQLDS"/>+
    +<property name="eclipselink.target-database" value="MySQL5"/>+
    +<property name="eclipselink.jdbc.native-sql" value="true"/>+
    +</properties>+
    +</persistence-unit>+
    +<persistence-unit name="genesys" transaction-type="RESOURCE_LOCAL">+
    +<provider>org.eclipse.persistence.jpa.PersistenceProvider</provider>+
    +<class>genesys.Enquiries</class>+
    +<properties>+
    +<property name="eclipselink.jdbc.driver" value="com.mysql.jdbc.Driver"/>+
    +<property name="eclipselink.jdbc.url"+
    +value="jdbc:mysql://127.0.0.1:3306/main"/>+
    +<property name="eclipselink.jdbc.user" value="root"/>+
    +<property name="eclipselink.jdbc.password"+
    +value="B0855467D54C688144F5AA7621CE386D"/>+
    +<property name="eclipselink.logging.level" value="FINER"/>+
    +<property name="eclipselink.target-server" value="WebLogic_10"/>+
    +<property name="eclipselink.target-database" value="MySQL5"/>+
    +<property name="eclipselink.jdbc.native-sql" value="true"/>+
    +</properties>+

    I am trying to do the same thing, but in my case I am using my onkyo receiver to do the decoding. I have a minijack converter to coax in the mic jack of the card. I switched the options to digital i/o out. This does work, but I can only get stereo sound. When I play my 5. dvd, it still plays it in stereo sound. I have all the settings correct, as I can get 5. sound out of my onboard coax but not the creative extreme music. It also greys out the option for passthru(external source decoder).
    My roommate has the platinum creative sound card with the front panel with coax/optical out right on it, he has WAY more dobly/dts options in his menu settings and is able to send 5. out easily. auto detects it and with minor tweaks, gets 5. out thru either optical or coax.
    I thought this card supported 5. coax out thru the digital port. I just dont think it does, the options are missing from the menu all together, and yes I have the most recently updated webupdate. I can get stereo sound thats it. Funny how my realtek onboard does a way better job then this "higher end" sound card.
    Am I missing something maybe? Please help, I would like to get this going, or at least get a solid answer if this is even possible so I can stop wasting my time with it.
    Thanks,
    Joe

  • I have a ipod touch gen 2 and I am trying to get airplay to work with my pioneer Elite VSX receiver.

    I have a gen 2 IPOD touch with the current operating system (4.2.1).  As well I have a Pioneer A/V Elite series VSX 52 that is airplay ready.  On my ipod touch there is no airplay icon(s) with the music feature.  I am trying to make this work but have no results.  If there is a download that I need to enable to have this function work.
    Let me know
    KUNTRI

    There are no setting on the iPod. Unlike the iPad wich morrors the iPad display, TV out on an iPod only displays TV out on apps that support TV out. The Video app is one such app.
    Is that you problem?
    Otherwise:
    Try:
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.

  • Trying to get collision detection working with havok

    Hi - I'm having some trouble using collision detection within
    director using a w3d file with havok applied to it. I've been using
    the registerinterest function but I get a "value out of range"
    error.
    This is my code (there is a cone and box on a plane imported
    from 3d max - named Cone01 and Box01 these are both movable rigid
    bodies).
    on beginSprite me
    box1=member("3d").model("Box01")
    cone1=member("3d").model("Cone01")
    w = member ( 1 )
    hk = member( 2 )
    hk.initialize( w, 0.1, 1 )
    hk.registerInterest (box1, cone1, 10, 0, #collision, me)
    end
    on collision me, details
    sound(2).play(member("hihats"))
    end
    on enterFrame me
    end
    I've also tried this and had no luck:
    on beginSprite me
    rb1 = sprite(1).pHavok.rigidBody("Box01")
    rb2 = sprite(1).pHavok.rigidBody("Cone01")
    w = member ( 1 )
    hk = member( 2 )
    hk.initialize( w, 0.1, 1 )
    hk.registerInterest (rb1, rb2, 10, 0, #collision, me)
    end
    Any help would be great.
    Thanks

    quote:
    Originally posted by:
    josiewales
    Hi - I'm having some trouble using collision detection within
    director using a w3d file with havok applied to it.
    Just study this example:
    http://necromanthus.com/Games/ShockWave/tutorials/FPS_Havok.html
    cheers

  • Trying to get SPDIF to work with Audigy 2... help! (I read the guide)

    ?I have the following miniplug/TOSlink cable purchased from Amazon:
    Amazon.com: Cables To Go 2707 Velocity Toslink-to-Optical Mini Plug Digital Cable (3 Meters): Electronics: Reviews, Prices & more
    I enabled SPDIF output from the Audigy 2 card as the default sound device in Windows 7. I have the miniplug end plugged into the white output of my Audigy 2. There is a sound bar next to the SPDIF output showing that there is output if I play a DVD or music. But, when I look at the TOSlink end of my cable, I see no red light AKA no signal is being output.
    In the audio console, I have tried both the SPDIF passthrough and the onboard encoder options without success from either. What am I still doing wrong? Thanks guys

    so what i understand is i cant connect my home theatre (optical out only) with my audigy 2 zs even i use optical to mini plug adapter?

  • HT4108 I have a hdmi connector and can not get a picture to come on my tv. Need help also bought the RCA cables and can not get it to work with my iPhone 4 g

    I have a hdmi dock connector and can not get  it to show on my tv. It's a iPhone 4g please help also have a RCA cable to and can not get it to work either

    With what apps?  Not all apps require video output.

  • How to connect Airport Time Capsule to WD Live TV

    I recently bought an Airport Time Capsule with 2tb storage. I am wanting to access the media files I save to the Time Capsule on my WD TV Live. I have tried doing wirelessly and it works but if I shut my computer it disconnects and wont automatically connect to it even if my computer is open. I keep having to delete and readd the Time Capsule as a media share server everytime I want to access the files. What am I doing wrong???
    The bigger question I had is since the Time Capsule has a USB port and so does the WD TV, can I just connect them and access the files via usb to usb??? I dont mind using wifi to connect but if it can be done I would rather connect without wifi so that if my internet goes on the fritz I can still watch movies and stuff from the time capsule hard drive.
    Thank you all for any and all help!!!

    The media files on the TC are in what format? WD Live can read almost any format but it cannot read iTunes Libraries.
    There is a fairly long discussion already on getting WD to read movies from a TC.
    https://discussions.apple.com/thread/5226379?start=0&tstart=0
    Note the info there.
    eg SMB naming for the TC.. this is most important. Standard Apple names will be problematic at best.. useless and non-functional at worst. Make sure the WD Live sees everything in the network with standard windows names.
    The bigger question I had is since the Time Capsule has a USB port and so does the WD TV, can I just connect them and access the files via usb to usb???
    No, you cannot do that. The USB on the TC is for plugging in a printer or a hard disk. It has no access whatsoever to the internal disk.
    However the WD live can present its USB disk to the network. So if you simply plug a USB hard disk into the WD live. And you can then copy your movies to the WD over ethernet or wifi (ethernet is obviously faster) but once on the USB drive then it won't matter if the internet is off or even the local LAN and wifi is off as the WD can still play the movies. IMHO that is the best way to do it.

Maybe you are looking for