Ive got a 1st gen apple TV wifi issues help please.

Ive got a 1st gen apple TV, had it about 4 years and I cannot get it work over wifi for the past 2 years. If its wired with network cable it works.If using wifi I either get no movies on appletv or sometimes it syncs and lists all my movies in Itunes but when I try and play any movies it says video format not recignized. Ive disconnect the Ethernet cable from the Apple TV. Navigated to Settings > General > Network. Click Configure Wireless.Selecte my wireless network and entered password then done. see "Connecting to wireless network" screen appears then "Connection Succeeded" I see IP address, Wi-Fi Address, and signal strength is strong all bars. Any ideas as to What the heck is wrong with this AppleTV.

Doesn't sound good if you've restore to factory from the diagnostics menus and are seeing this.
Have you unplugged from the main for a few mins and restarted.  Disconnect any ethernet cables if you have them.
AC

Similar Messages

  • 1st Gen Apple TV Sync issues.

    Hello,
    I had my atv syncing with my mac over wifi. Suddenly it stopped, i have made no changes other than usual system updates. My mac is connected via ethernet and airport. If I go into my system setting on the mac and disable the ethernet port the ATV will sync over wifi, however if i leave both connections open on my mac, the atv wont appear. I never had this problem before. Any idea's ??
    Thanks.
    rany

    Did you update to the new iOS for ATV? I would recommend try leaving one of the connections off...... either ethernet or WiFi as there isn't any reason to have both to your apple TV.. I just upgraded to ATV@. It will not recognize connection if both ethernet and WiFi are simultaneously connected under ATV iOS 4.1 I had not difficulties syncing my 1st Gen ATV via WiFi or internet use. Hope this helps......... I think you actually solved your own problem if I understood it.

  • HT1498 (1st Gen) Apple TV Rental issues:

    Last 2 rentals I have purchased through my 1st generation Apple TV have appeared to download fine, however when I go to play all it shows is a white screen with no sound. Has anyone else experienced this. Were you able to come up with a solution? Thank You.

    Try restarting the Apple TV by removing ALL the cables for 30 seconds, or resetting it using the reset option under general. You should also try restarting your router or de/re authorising your iTunes library.

  • I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife.  I restored it to original factory conditions.  Now we cannot install iBook on it since it requires iOS 7.  What can we do with older iPADS that are still 100% functional.

    I recently upgrade to an iPAD Air. I gave my old iPAD (1st gen) to my wife.  I restored it to original factory conditions.  Now we cannot install iBook on it since it requires iOS 7.  What can we do with older iPADS that are still 100% functional except for the fact that you cannot updrade the iOS above version 5?

    Look at this similar problem in getting Netflix on an iPad 1. Same technique should work for you.
    https://discussions.apple.com/thread/5753106?tstart=30
     Cheers, Tom

  • HT1551 1st Gen Apple TV - Remote worked fine yesterday and today acts like it is unpaired.  Is it possible to pair it again without a working remote?

    My 1st Gen Apple TV remote worked fine yesterday and today acts like it is unpaired (amber flash when I hit a button).  Is there a way to pair it or another remote now?
    Thanks.

    A 5 GHz network cannot reach as far as a 2.4 GHz one, nor is it able to penetrate walls and the like anywhere near as well, it is not therefor always an ideal solution. It can help avoid interference from neighbouring networks but it may not avoid interference from other household appliances. You might want to try another wifi channel or even temporarily move the Apple TV closer to the AP for diagnostics.

  • Using 1st Gen Apple TV on several Logins

    Hi
    I have a house guest that I have set up a separate login account for on my Mac. I have already setup my iTunes library so they have access to it, but no purchase rights, while on the machine. I have 2 1st Gen Apple TVs associated with my library. How can I enable the apple tvs so he can watch movies or listen to music from his side of the Mac?

    More or less the same story here.
    My Apple TV and my iTunes got along just fine until I downloaded the latest version of iTunes. Now Edit > Preferences > Apple TV no longer exists so it's hard to check "Look for Apple TVs". The Apple TV device doesn't show up in iTunes.
    I, too, am afraid I'm going to lose stuff I bought with Apple TV that hasn't been synced with my iTunes library.
    Message was edited by: jdmaynard

  • "Music Videos" under "Music" header on my 1st gen Apple TV menu is missing.

    I no longer seem to have "Music Videos" under the "Music" header on my 1st gen Apple TV menu. This occurred about a month ago now (early October). Does anyone know why? I have worked with Apple Support and I have reset my device to factory settings to no avail...
    I actually used this menu option often but I might have been the only person who did since I cannot find any information on it nor does anyone seem to know it even existed:)... I am more curious to find out what has happended now than expecting a fix for it.
    I have had a rough couple months with my Apple products actually...:(
    Thanks for taking the time to review.
    Regards,
    Roger Delorme.

    Having the same issues.....I have two 1st Gen Apple TVs and neither are showing on the Remote App on any of my devices as of Dec 24th.  Everything is connected to the same network, have most recent updates to Remote App, software of devices, itunes.  Rebooted router, computer, apple tvs....deleted the app, reinstalled...turned off wifi and homesharing, then turned back on and the Remote App will only find my itunes library and not the Apple TVs.  Any help would be appreciated.

  • If I can stream HD on my 1st gen Apple TV can I expect same from 2nd gen?

    I just rented Legend of the Guardians in HD on my 1st gen Apple TV and it played instantly at 12pm on Sunday. My connection is 15 mbits according to DSLreports. Can I expect the same performance from Apple TV version 2? When I got the 1st generation Apple TV it sucked for streaming HD and now I never use it for that because the experience was so frustrating. I got an Apple TV 2 for Christmas and I'm trying to decide if I should return it before opening it. Netflix is the main appeal but I can get a bluray player that streams netflix, vudu and more for about the same price. More reliable HD streaming from Apple might be enough for me to keep it.

    I have 3 Apple tv's one that is the 1st gen I think 40 gb one that is 160 gb and finally the streaming one. I think that the newer one for me seems to suffer maybe a little more interference than the 1st gen models. My fix with suggestion was to have it run on the 5GHZ side maybe it was interference I don't really know all I know that I can stream movies no problem. I do have cable service at 20 mbps it should have no problems but running at 2.4 I did have problems saying it would take hours before I could watch the movie.I download on Itunes HD movies.

  • I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I have an ipad mini 1st gen 64 gb (wifi only) and i have problem with some of my apps. These apps have lags when you play with them for a few seconds the apps are having lags are call of duty strike team, gta San Andreas and nfs most wanted.pleas help me

    I'm going to guess videos buffer for a while also...
    Two possibilities, one is you should close apps on the iPad, the other is your internet speed is not able to handle the demands of a high speed device.
    To close apps:   Double click home button, swipe up to close the apps.
    To solve internet problem, contact your provider.   Basic internet is not enough for video games and movies.   Your router may be old and slow.

  • How do I get Faces in iPhoto to appear on my 2ed gen Apple TV. The appear on my 1st gen Apple TV with Photos and Events.

    How do I sync Faces in iphoto to iTunes and then to my 2ed gen Apple TV so I can show Events,Photos or Faces on my TV? On another TV which I have connected a 1st gen Apple TV all three appear, so some how the 1st gen is sync'ing with itunes but not so with the 2ed gen Apple TV as I ony get Events and Photos on the TV screen.

    To choose which photos to show on your Apple TV
    File > HomeSharing > Choose Photos to share with Apple TV
    The dialogue box that opens lets you select what photos to send over

  • Music Gone from 1st Gen Apple TV after iTunes upgrade to 10.1.1 (4)

    I use a 1st Gen Apple TV to store and play all my music throughout my home. It's perfect for that because I don't have to stream from my computer (as with 2nd Gen Apple TV) and can control the music from all over the house from the Remote App on my iPad and iPhone. After I upgraded to iTunes 10.1.1 this week I synced my Apple TV with my computer to add some new music to it from iTunes. All of my music promptly disappeared from my Apple TV. It may have still been there, but didn't show in iTunes on my computer or on my iPad or iPhone remote apps.
    My first thought was that I might have to do a restore on the Apple TV and then re-sync with my computer's iTunes. Before doing that, however, I simply re-synced all of my music to the Apple TV from my computer. It worked and now all of the music is available again.

    had the same problem once
    went to the appletv's settings and unlinked it with the computer
    let it do it's restart and clear synced data
    set it up to link with the same computer once more
    and let it sync the data once more
    haven't have issues since
    but described the solution to many in this forum who had the same issue

  • HT3296 How do I navigate 1st gen Apple TV without ANY remote?

    How do I (or can I) navigate 1st gen Apple TV without being able to use any remote?

    You can use Remote app on an iOS device, however it needs to have ben configured first and that would entail using an Apple Remote.
    If you have lost or do not have an Apple remote the new silver remote works with all units.
    Some 3rd party programmable remotes may also have codes to use with other devices like AppleTV.
    AC

  • 1st gen Apple TV - SD TV - no color

    I'm seeing only b&w with my 1st gen Apple TV connected to an SD TV through a component to composite converter. Why don't I have color?

    Thanks for your response.
    I was actually wondering about iTunes updates, not Apple TV.  The problem is that iTunes does not show tabs for syncing my 1st Gen. Apple TV.  I wonder if the problem is in iTunes.
    My Apple TV does still remember music and photos that were previously synced, but I can't re-sync to add new music and photos.
    I am worried that if I unlink and re-sync, I won't be able to get anything back, and will be limited only to streaming.
    Thoughts?

  • 1st gen apple tv.

    I have a 1st gen apple tv. I have always and only streamed from my 1T TC. What has heppened is: it follows menus to the selected movie and when i select the movie, the 1st 1 second of video plays and then freezes.  The audio continues for i don't know how long because i stop it.  I have tried to sync a movie to it (wirelessly) and it tells me i have to open port 336(?)
    1. Anyone know how i can fix the streaming?  or how to open a port so i can try syncing...
    I'd rather stream as i have 100's of movies to stream

    Applications>Utilities>Terminal
    sudo ipfw add allow ip from 336 to 336
    sudo reboot
    If this does not work, try connecting the Apple TV to the Time Capsule via ethernet.
    WARNING
    Before entering sudo reboot, save any open files. You will lose all changes during the reboot.
    You will need an admin password. The characters will not show when entering the password.
    Also, you could go to Settings>Computers>Your Library.
    Then go to Settings>Computers>Add iTunes Library. A code will be displayed. In iTunes, go to iTunes>Prefrences>Apple TV>Remove.
    After that, restart iTunes. Your Apple TV should appear under Devices. Select it and enter the code.
    If that doesn't work, I don't know what will.

  • Hi, I have the 1st gen apple tv and suddenly when trying to rent a movie I only see movie trailors or my movies. What do I do to see the rental interface??

    hi i have the 1st gen apple tv and suddenly when trying to rent a movie i don't see the rental interface. i did a factory restore and now i see movie trailors and my movies but not rental option. any idea what could be wrong??

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue. You can leave feedback for Apple at the link below.
    http://www.apple.com/feedback/

Maybe you are looking for

  • Parameter Prompting and Oracle Driver Issues

    I am in the process of testing several reports for use in Glassfish/JSP viewer.  I am in need of clarification of: 1.  Parameters are seen - but it does not prompt the user for the parameters on initial JSP page load.  Is this normal behavior or no? 

  • SSMA 6.0 Oracle to SQL Server 2012 Migration

    Hi SSMA Team, We were migrating data from Oracle(Oracle 10.2.0.5.0)  to SQL server 2012 via SSMA 6.0 and during the migration experiencing  below error “ORA-03106: fatal two-task communication protocol error” We are using SSMA on Windows server 2008

  • Can't connect and use 2 Store.E Canvio HDDs at the same time

    Hi there, I have 2 Store.e Canvio devices: 2TB and 3TB respectively but, it looks like I can't connect/use them at the same time, as if I do, one of them (the lastest I have connected), becomes inaccessible ("denied access"). If I disconnect the firs

  • Crashing/Freezing when rendering with PE11

    I truly have had it with this software. It use to happen here and there and today totally freezing my laptop. EVERYTHING else is closed. It is a SONY PC 8GB Ram memory. Have to force close the PC... restart and still nothing. 3 times. Just about gett

  • ME21N - Error

    I am tring to create a PO for article AAAA and Vendor YYY for a site and I am getting a ABAP dum Overflow during the arithmetical operation (type P) in program "SAPLXM06) I am able to create the PO to other sites though with same as above details. Th