Ive got CS6 and it has issues with ariel font
since getting CS6 ive had issue with typing words. i found out PHS dosent like the ariel font so removed this from my libarys. font book and PHS. did the crash report and everything the blogs said to do to remove a font but my layouts keep jumping when i type, the type weither its times, apple chancey etc changes to symbols and ^:" . jumps the layout from big to small and is really annoying . help please. im running 10.6.8 on an Imac.. i used ariel for everything and have had to change to myrad pro but this makes no diffence..what can i do to fix a courpted font that dosent exist in my computer?
I've just done a restore (it asked if i wanted to restore with the back up so I said yes) but it is exactly the same. The 'slide to unlock' doesnt slide. It was working perfectly earlier today! Do you think a system restore without the backup would make any difference?
Thanks for your help, it is very much appreciated.
Similar Messages
-
I downloaded CS6 and am having issues with my print driver. It is not compatible with the HP 2600n and have tried to download drivers given to me by adobe ( (Jupiter 3) but it is not working. after a few days. Its a temporary fix and is still looking for the HP driver when i boot up. It also will not save in any print or postscript format. Does anyone know how to fix?
Currently use a Mac with the latest Mavericks 10.9.4Oh boy! Acting kind of weird seems to be an understatement, aquaequus!
What type of troubleshooting were we able to do with you? I want to make sure that we can get some sort of resolution for this problem.
It is quite possible the battery door may get your phone in working order again. I'm not sure if the store has it in stock, but it is available in our warehouse for $14.99 which can be ordered via customer service.
Tamara H.
Follow us on Twitter @VZWSupport -
It seems after the latest software update, my iphone 4 has issues with the phone and voicemail locking up as well as opening random apps. Any thoughts?
Hi clintfromid,
Thanks for using Apple Support Communities. I would recommend closing all your apps and restarting and maybe resetting as good initial troubleshooting steps for this:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iPhone, iPad, iPod touch: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Ari -
My wife has issues with her AOL email and a tech rep told her to contact Apple for a virus scan. Has anyone else had a problem like this?
You forgot to describe the 'issues' but there are no viruses that affect Apple OS X.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer some guidance on the main security threats and how to avoid them
Bear in mind that from April to December 2011 there were only 58 attempted security threats to the Mac - a mere fraction compared to Windows malware:
http://www.f-secure.com/weblog/archives/00002300.html
(I have ClamXav set to scan incoming emails, but nothing else.) -
Downloaded latest IOS 7.0.2 and it crashed my iphone 4. Now Ive got nothing and it wont restore when connected with Itunes cos Error Message 4005 comes up. Cant find it listed anywhere. Help
Hi!
It looks like there might be some security settings or software on your laptop that's preventing the restore process from working.
Check out this article in Apple's support. It shows you the steps you can take to try to get around error 1611.
Like diesel vdub said, a DFU-mode restore might give you success where a regular restore might not, so maybe you can try that.
What you need to do is put your phone into DFU mode, which is a low-level mode that helps the restore process get a little more done, or it can help iTunes get around certain roadblocks (hopefully like the one you're experiencing!). Your computer will install special DFU-iPhone drivers for it, and then iTunes will see it as a phone that needs restoring.
To get your phone into DFU mode:
Plug your phone into your laptop.
Turn the phone off.
Press and hold the power/lock button. Keep it held in, even after the display turns on and you see something on the screen. As soon as you see something on the screen, start holding the home button as well as the power button, so that they're being pressed together.
Keep both buttons pressed down for 10 seconds.
After 10 seconds, release the power button, but keep holding home until the laptop sees a new USB device. Once you see that, you're in DFU mode, and you can let go of buttons. Your iPhone screen will be blank during it all, even though it's actually on, in DFU mode.
Now your restore should work!
If your phone shows the Apple logo or anything else while you're trying to get it into DFU mode, then something went wrong. Try the steps again. If it suddenly starts up normally again, try reducing the time to a bit less than 10 seconds--try reducing it by about a second at a time. It should work! -
Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls helpLindsay,
Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard. -
Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"
Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
You can double check this yourself:
First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
Keeping Photoshop Up-To-Date
If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
Photoshop Help | Digital Negative (DNG)
The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
-Noel -
I am using an early 2008 MacBook Pro and am having issues with it deleting text on its own (in word, emails, etc.). As I am typing it all of a sudden starts deleting and I can't stop it. This happened once before and it was due to a buldging battery pressing on the track pad. I checked the battery and it appears to be fine. What can I do?
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. For instructions, launch the System Preferences application, select Help from the menu bar, and enter “Set up guest users” (without the quotes) in the search box. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
*Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode.
Test while in safe mode. Same problem?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of steps 1 and 2. -
Next and previous button issue with Prettyphoto in filtered gallery
Hi there,
I'm stryggeling with a next and previous button issue with Prettyphoto in filtered gallery.
Like to have it like this: http://demohtml.templatesquare.com/think/portfolio.html#!prettyPhoto
(next and previous buttun are there as well social connection)
My problem is this: http://finca-sonrisa.bitl.nl/sonrisa_gallery.html
(social connection is there but no next and previous buttons??)
Anybody who has a solution fot this. Have tried to change the CSS, Javascript and has followed the instructions from Prettyphoto but without any succes.
Your help we muchly appriciated,
Best Regards,
Rolfbump PLEASE HELP
-
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
Hi, I'm using MAC OSX 10.6.8 and have intermittent issues with receiving new emails - sending is OK. I've tried the workarounds (take offline & take online), quitting mail etc - no luck. Have cleared space, checked Window - Doctor and server has green light. Mail Activity shows 47 emails waiting to download, iPad and iPhone download them all OK - no extra big files stopping the download either. In the past, quitting mail has worked, but not today... Any suggestions?
-
I only have one apple ID and facetime has worked with it before, but now I get the message "Unable to verify email because it is already in use". I have looked ofr a solution but can't find one. can anyone help please?
I spoke with Apple Support this morning and they believe anything MobileMe related is due to the conversion over to iCloud that's taking place.
As for other email clients, check with your host to see if settings have changed on their end. I use inmotionhosting.com and over the weekend the updated their outgoing requirements so that a password authentication is now needed.
Hope that helps get some on the right path to resolving their issues! -
Playback pauses and audio sync issues with live video stream
I'm seeing playback pauses about every three seconds and audio sync issues with our live demo stream when using the OSMF/Strobe player. It happens on both our 2Mbps 720p stream and our 480p 750Kbps stream so it does not seem to be related to higher resolution/bandwidth streams. It also happens if I point directly to a stream asset or if I point to a .f4v with both streams listed for dynamic so it does not seem to be related to dynamic streaming specifically.
The same live streams play back very well without pauses or audio sync issues in the Akamai's dynamic player and even slightly better with JW 5.2.
I have viewed the OSMF/Strobe playback on three different laptops of various age (3 months to 2 years) and two are Windows and one is Linux. I have also tried the various buffering options on the Flash Media Player Setup and Strobe setup and it has not made a noticeable difference.
To see the stream with the Akamai player, go to: http://live.kulabyte.com
To see the stream with the OSMF/Strobe player, go to: http://live.kulabyte.com/osmf
I do not have JW set up for public viewing yet, but the two above show the distinct difference.
We are really hoping to start pointing our customers towards the OSMF player because of the support provided by the community and Adobe, but we have to get the quality of the playback to be acceptable first.
If someone has ideas on debugging I can PM the actual video assets to you.
Thanks,
TimHi Tim,
You need to add this setting:
dynamicStreamBufferTime=8
The actual value can be higher or lower. The best practice is to use a value that is twice the keyframe distance. Anyway, try different values and see which performs the best for your content.
I know that the setup page does not contain this option and it is not documented in the UserGuide. We simply missed it. Sorry.
Also note that the dynamic buffering algorithms are not being used for dynamic streaming content. I tried to explain this here:
https://sourceforge.net/adobe/smp/wiki/Dynamic%20Buffering/
Looking forward to your confirmation that this solved your issue.
-Andrian -
Lion / Safari 5.1 has issues with the pinch/zoom (embedded links don't zoom correctly)
Ever since upgrading to Lion Safari 5.1 has issues with the pinch/zoom. Any embedded link does not zoom in proportion to the surrounding page and it makes it unusable. (the embedded link zooms much more). Any ideas? This makes safari almost unusable for many webpages.
Is there a fix to this? Or can I consider uninstalling 5.1 and rolling Safari back to 5.05? Not sure if this is a Lion issue or a Safari issue. Everything worked great prior to Lion.
(I have to say, Lion has been more annoying than beneficial to this point!)Here are 2 screenshots of the issue (before and after a zoom) see how the add in the first one that shows 25% off in the first picture zoomed too large after the zoom to see the whole thing?
-
i have a serious (and bizarre!) issue with my novation impulse (Although i've tried it with two other keyboards and i still have the same problem) and its compatibility with mainstage 3.
the problem is best explained on the following one - page thread:
https://discussions.apple.com/thread/3951518?start=0&tstart=0
(Clearly i'm not alone in this problem, although i think i figured out what's going wrong a little more than he did...read on!)
his solution, to put mainstage in jump mode, is very unsatisfactory to me, as it bounces all of a sudden to drastically different settings.
basically, my analysis is that my controller is NOT receiving MIDI date from mainstage. in other words, mainstage knows what my controller is doing, but my controller doens't know what mainstage is doing.
let's say i turn the knob all the way to the right ... 127...and the virtual fader goes to the right like it's supposed to.
now...next...let's say i change to a different patch, where that same VIRTUAL fader is not at the max clockwise position..maybe it's only at 1pm. now when i turn the physical knob to the RIGHT, the midi data is still at 127 on the controller! it didn't "reset" to sync up with the new level (say 80 or so) setting on the new patch. so i can't increase that new setting of 80 by continuing to turn the knob to the right. i have to turn it all the way to zero,...and then continue PAST zero until the controller thinks that IT is at 0...at that point the controller and mainstage are in agreement, and things work fine....so bascially, the keyboard thinks the level is at max...but mainstage thinks the level is at 1pm.
i am using Logic 9, and i have a macbook pro 2.9 Ghz I7 with 8 gigs of memory and OS X 10.8.4Hi Josh,
Thanks for taking the time to contact us here a Novation for technical support. Lets continue to correspond via email so we can get your issue resolved.
Thanks.
Mike Towns -
I have Iphone 5 and have an issue with deleting part of the messages in Imessage conversation. The trash button is not displayed to delete part of the imessage. I see only delete all option. Is it a bug?
Hi An Iphone user,
If you are having issues deleting a specific message from an iMessage conversation (not seeing the Trash icon), you may want to double-check that you are following the steps outlined in the following article:
How do I delete a message?
To delete a message, tap and hold the message bubble, then tap More.
Tap Delete All to delete all the messages. Or tap to select the messages you want to delete, then tap .
After you delete a message, you can recover it only by restoring from a backup.
Send messages with your iPhone, iPad, or iPod touch - Apple Support
Regards,
- Brenden
Maybe you are looking for
-
How we can get the output in excel format for Spawned programs?
My requirement is to get the excel output for some of the programs (like -Adjustment Register, Applied Receipts Register). I am trying to achieve this by BI Publisher. But these programs has "Spawned" executable. And when I am changing the output typ
-
OEM 10G can manage databases oracle 8.1.7 / AIX 4.3.3
I'm installing OEM 10G on my desktop (windows 2000) i'm cannot add hotes or cibles, oem 10g said "installing oracle management on computer hote" and my databases are oracle 8.1.7 platform aix 4.3.3 . How do for managed databases ? Thanks
-
Deferred Tax : Post Invoice and Payment Seperately $1
Hi Guys, I am getting the following error while doing F-58. Deferred Tax : Post Invoice and Payment Seperately $1 Please advise. Thanks, Srikanth.
-
Calculating exchange rate in formula
This is trying to calculate based on rates stored in the RATEDB2 db.IF (@ISMBR(USD) OR @ISMBR(CAD)) Base_Amt=Tran_Amt * @XREF (RATEDB2,Conv_Rate); ELSE Base_Amt = Base_Amt; ENDIF;It does nothing.
-
Importing eclipse projects to JDeveloper
Is there any way to import Eclipse project into JDevelper 10g? Thanks.