Ive got trouble with deep sleep :(
Ive just bought a used Ipod Nano (2nd generation, (product)red) from eBay after accidentally destroying my original, it plays fine and after a few minutes inactivity goes into sleep mode... heres the problem, for the first few minutes, it restarts on command, however if i leave it for literally five minutes or more, i cant get it to restart. After much button pressing and more than a few minutes waiting, the apple logo appears and it boots up, then its fine again, ive read that this could be "deep sleep" but i thought that should be only after 36 hours or so? its fully charged and ive tried restoring it to factory settings via iTunes but it hasnt helped, please help!
Often a Restart and a Reset will resolve these issues...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On...
Similar Messages
-
hey guys ive got issues with my macbook pro that i bought not a year ago, and for the last week its just randomly restarting especially when im watching a video or using finalcut pro x can someone help me?
What do you mean "Leave them my laptop again"? do you mean you have had it worked on before? for the same problem or a different one?
You need to take it in to Apple ASAP. No matter how long they have it, you want it fixed and fixed correctly.
top_cheese_1 wrote:
i bought it june 2012.. still on the warranty. i just didnt wanted to leave them my laptop again, but ok if you think thats what i should do.. -
Troubles with the sleeper: how can I avoid it restarting on its own?
When on sleeper, my MacPro early 2008 restarts on its own after a while.
Until very recently, it worked perfectly well.Thanks for your help.
I wonder if the the troubles I have with the sleeper and with the start button are not linked with an issue on the main disk. Apparently, I need to repair my main drive:
- the number of volume files is not valid
- the numner of volume directories is not valid.
2013-12-15 11:02:20 +0100: Utilitaire de disque a commencé.
2013-12-15 11:04:13 +0100: Vérification du volume « 1 Main HD »
2013-12-15 11:04:13 +0100: Démarrage de l’outil de vérification :
2013-12-15 11:04:15 +0100: Vérification en direct en cours.
2013-12-15 11:05:18 +0100: Vérification du volume HFS Plus journalisé.
2013-12-15 11:05:18 +0100: Vérification du fichier de blocs en excès.
2013-12-15 11:05:18 +0100: Vérification du fichier de catalogue.
2013-12-15 11:05:18 +0100: Vérification des fichiers à liens multiples.
2013-12-15 11:05:18 +0100: Vérification de la hiérarchie du catalogue.
2013-12-15 11:05:18 +0100: Vérification du fichier des attributs étendus.
2013-12-15 11:05:18 +0100: Vérification bitmap du volume.
2013-12-15 11:05:18 +0100: Vérification des informations du volume.
2013-12-15 11:05:18 +0100: Nombre de fichiers de volume non valide
2013-12-15 11:05:19 +0100: (normalement 617151 au lieu de 617152)
2013-12-15 11:05:19 +0100: Nombre de répertoires de volume non valide
2013-12-15 11:05:19 +0100: (normalement 173934 au lieu de 173933)
2013-12-15 11:05:19 +0100: Le volume 1 Main HD s’avère corrompu et doit être réparé.
2013-12-15 11:05:19 +0100: Erreur : Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.2013-12-15 11:05:19 +0100:
2013-12-15 11:05:19 +0100: Utilitaire de disque a cessé de vérifier « 1 Main HD »: Le disque nécessite un réparation. Démarrez votre ordinateur depuis un autre disque (tel que votre disque d’installation Mac OS X), puis ouvrez Utilitaire de disque pour réparer ce disque.
2013-12-15 11:05:19 +0100: -
Got trouble with the scope....
Hi,
I have a program, and I have trouble with the scope.
I created two nodes, and I can print them out within that sort of proceedure say
public void a();
//generate nodes and such
but when I do this:
public void b();
//search through the made nodes
it will compile, but will say that there are no nodes created, when i already did by another one, now I know this is a static scope, and I was wondering what to do here?1) You need to declare the nodes in the class, and assign them in a(). Variables declared outside a method are referenceable within all methods of that class.
2) Get rid of the semi-colons at the end of your method signatures -- the code you've provided won't compile that way.
3) Not to insult you, but you should really spend some time on fundamental programming concepts. Scope is fundamental concept, suggesting that there are some troublesome holes in your knowledge. The more you know, the more efficient you will be.
Bueno suerte. -
Ive got poblems with my thundebolt display conected to my macbook pro 13 inch mid 2011
im running a thunderbolt display with a macbook pro 13 inch, the display shuts off by itself, also when the macbook goes to sleep and its woken up the thunderbolt display stays off and i need to restart the sistem, the macbook also dosent recognize the display as soon as i turn it on i have to play around with it for a while conecting disconecting the thunderbolt cable for it to work, ive also got problems to eject the display as it is not shown as a disk.
any oe else have this problem, ive searched forums and youtube and no articles exist on thunderbolt displays and macbook pros 13 inch.It's possible that it's the same for all registrations, even though the MacBook Pro and the MacBook Air products are distinctly different. That information is autofilled, probably based on the serial number of your product, so even though it may say it's a MacBook Air, Apple may just be bundling all MacBooks under one group and labeling them MacBook Pro. But the serial number would tell them exactly which model you have, so there's nothing to worry about.
AppleCare Protection is based on the product group, so all MacBooks would be the same price, just as all iMacs would be the same price. -
I got troubles with my app tap tap revenge 4
My app tap tap revenge 4 has a lot of troubles like dont let access to
The Tap store and don't let me download music to play, the app always
Stop itself and I reinstalled the app and the problem continuos
If somebody can help me I appreciate the help
If someone wants talk to me or make FaceTime to me to tell me how
To fix this problem when I see one reply I show my emailI think I remember having a similar problem with that app a while back. I put it down to the developers server being very buggy. Sorry I couldn't of been more help!
-
Ive got problem with my device
am kwinda humbelani my nokia asha 302 when i try to login in to my email app it appears a message that reads conflict application what must i do??
Because Nokia Mail is a Java app, but a system as well; and that is not expected behaviour: Did you try the Nokia Software Recovery Tool already?
-
Update of photoshop CC - trouble with NVIDIA Quadro 1000M display driver. PS freezes
Hey guys,
Since today I've got trouble with my PS CC.
I've updated PS CC yesterday 2014-12-12.
I was doing some drawings today and two times PS freezes during switching layers of or selecting a mask.
A message appeared that there was trouble with the display driver an PS switched off the GPU support because of that issue.
Ok, I thought let's update the display driver and so I've done today. I switched to actual NVIDIA display driver version 314.21
I'm working with an NVIDIA Quadro 1000M on a DELL mobile Workstation Precision M4600 with 8 GB RAM.
Now when I start up PS and press alt+k, my 2 displays showing a black screen for 1-2 seconds.
After closing the general setup window again black screen for 1-2 sec and the top menu bar is showing no entries.
When I move the mouse pointer over the bar, the menus appear again. But the bar is like transparent at the parts where no menues are.
When I unlock the window from the screen an put it back fitting to the screen everything looks like normal.
Till today I hadn't any problem with my notebook in that kind of way.
Maybe someone has or had similar problems.
Would be nice if someone can help me.
thanksOh, that sounds very bad. It's not that bad for me. It's not crashing that often at the moment, only black screens at start up or if setting dialog is opened. But I will see tomorrow how often it will crash, during today it crashed 2 times when doing some ridiculous simple actions like switchid to another layer and the other time when trying to edit an mask layer. I will contact the support chat on monday regarding this issue. Maybe there is a solution or an update soon... I keep may fingers crossed for you.
-
Hello , I' got trouble with my iPhone 5s . On the First Day I bought it , It Feels weird when I Press My Home Button . So I'll try my friends Iphone 5s , Their Home Button isn't like mine .
* They Can use their Fingerprint While I can't
They Told me The Issue = Home Button Sinking.
So I Went Apple Store , they told me , We Don't know Warranty about HOME BUTTON . And we dont know whether it Could Be Claimed Under Warranty
But When I said, " So When I service it Myself " Does it void Apple Warranty ?? - They replied , Just Go to Apple Service Centre .
PLEASE HELP ME . I Don't Know What To Do and Sorry for taking your time .I purchased it at Apple Store in .... [ I forgot the place ]
But which Country if not Malaysia then the iPhone must be returned to that Country for any warranty or post warranty service .
The warranty is not International -
Trouble with mounted partitions (root twice)
Since a few days ago, I'm experiencing troubles with my partitions, like / being mounted twice. I'm using systemd instead of Init, mtab is symlinked to /proc/self/mounts
df output:
rootfs 103212320 13629136 84340304 14% /
udev 10240 0 10240 0% /dev
run 10240 344 9896 4% /run
/dev/disk/by-uuid/11331a92-bb2a-4aa2-a376-de9c2d12d6a3 103212320 13629136 84340304 14% /
tmpfs 2011176 0 2011176 0% /dev/shm
tmpfs 2011176 176 2011000 1% /sys/fs/cgroup
tmpfs 2011176 0 2011176 0% /media
run 10240 344 9896 4% /var/lock
run 10240 344 9896 4% /var/run
/dev/sda1 369251368 61124056 289370348 18% /media/Akai-Data
As you can see, / is mounted twice.
my /proc/self/mounts looks like this (in fact, is):
http://pastebin.com/bLi22Cps
my partition layout inherit from the time where I had both Windows and Arch Linux installed (so I was low on free primary partitions) is: sda1 350 GB ext4, sda3 8 GB swap, sda4 98 GB ext4. So I have no /home and / in different partitions as sda1 is where I have all my data.
my /etc/fstab:
devpts /dev/pts devpts defaults 0 0
shm /dev/shm tmpfs nodev,nosuid 0 0
/dev/sda1 /media/Akai-Data ext4 defaults,realtime,data=writeback 0 2
/dev/sda3 swap swap defaults 0 0
/dev/sda4 / ext4 defaults,user_xattr,realtime,data=writeback 0 1
Also, my /tmp folder has not being cleaned in 5 days. ¿Does it not supposed to be cleaned at every boot/shutdown (I have booted few times in five days)?
So, my troubles here are:
/ is mounted twice, and /tmp is not being cleaned. Any clue on this?
Also, to me, my/proc/self/mounts seems weird, aside from the fact that I think there is why / is mounted twice. Could someone check that?
Thank you in advance.
Last edited by ethail (2011-05-10 16:34:09)The only place I have found that is on my /boot/burg/burg.cfg file:
linux /boot/vmlinuz26-pf root=/dev/disk/by-uuid/11331a92-bb2a-4aa2-a376-de9c2d12d6a3 ro fastboot quiet logo.nologo resume=/dev/sda3 init=/sbi/e4rat-preload
But as far as I can remember, that has been always there since I started using burg instead of grub (half of a mont ago, maybe more). And never got troubles with that.
Also, rc.local has everything comented out
EDIT: have I to assume that the burg entry is leading to troubles?
Last edited by ethail (2011-05-10 21:37:04) -
Trouble With My MSI HD 6870 twin frozr II
hello all.. anyway i want to ask something about my gpu..
few days ago, i got trouble with my gpu, i dont know why...if i turned on my pc and when almost go to desktop, my pc automaticly restarted..so it goes..
what i've done :
fresh installed windows 7
fresh installed motherboard driver
after that my gpu worked well, but after i installed vga driver, my windows restarted again..
i can't go to desktop, i tried to installed every version vga driver but i still got the same trouble when almost go to dektop.
the only one way i can going to desktop is with safe mode..
so, this trouble comes after i installed vga driver..
after that, i triend to remove my gpu and used onboard gpu and my pc worked well, and i tried installed HD 4870 with the driver and my pc worked well..
so what happen with my 6870?
anyone can help me?
this is my spec..
processor :intel i7 2600k (default no overclock)
motherboard : msi Z77- GD65
GPU: MSI HD 6870
RAM : patriot gaming 16Gb
PSU : corsair Hx 750
ssd : samsung 840 128 gb
Thanks BeforeQuote from: Nichrome on 08-February-15, 17:57:21
Hi
Can you try different power supply? Either PSU gone bad or the graphics card, as PC crashing(restarting etc) upon installing vga driver is the sympton of bad card or PSU.
Also if possible try the card in different PC
no i didn't try my VGA into another pc..
ok the first thing i should to do is try my vga in different pc..if that vga works well the torubles comes with my PSU right?
thanks for your advice..^^ -
I got trouble with my home button.....next is with slide to unlock function...ad one more problem is with it's wifi droping
Pls helpWhat exactly is the trouble with the Home button and Slide to Unlock? If they are not responding, they might need replacement.
-
I got trouble with my computer!
During install of Windows XP i got an error like this: Wrong syntax in row 285 in the .SIF file thats been using of the installation program, turn of your computer.
My hardware configuration:
MSI KT4 Ultra
AMD Athlon XP 2200+
2 x 256M DDR PC3200 (Twin Mos)
MSI Geforce 4 Ti 128M DDR (MS-8870)
Soundblaster Live 5.1
IBM Deskstar 20GB
Seagate Barracuda 80GB
Please Help!!!!!!!!!!!!Tanks for all help!
My computer is up and running now, but with only one memory module!
After a test with memtest-86, it shows that i got one bad memory module. Thats why I have all this trouble.
This is what i read about the mainbord about memory, so it should work with 2 x 256M PC3200 memory.
* When FSB setting 166MHz the memroy only can
running at DDR333 mode.
* DDR400 memory support by MSI certified module only
* DDR400(PC3200) max. up to 2 DIMM slots.
* The tested and qualified DDR400/PC3200 DIMMs are
listed below: Vendor Type S i z e Maximum Number of DIMMs
TwinMos Winbond W942508BH-5 256MB 2
TwinMos TMD7608F8E50B 256MB 2
TwinMos Winbond W942508BH-5 512MB 1
TwinMos TMD7608F8E50B 512MB 1
Thanks for the help!!!!!!!!!!!! -
i ve got an iphone 3gs and im having a trouble with its touch screen because when you sometimes tap it doesent respond?
Often a Restart and a Reset will resolve these issues...
iPhone Reset
http://support.apple.com/kb/ht1430
Try this First... You will Not Lose Any Data...
Turn the Phone Off... ( if it isn’t already )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear and then Disappear...
Usually takes about 15 - 20 Seconds... (But can take Longer...)
Release the Buttons...
Turn the Phone On... -
CAN the Mac Pro deep-sleep with the Apple Raid Card?
So, reading through previous posts, there seems to be a problem (or 'feature' to charge the battery?) that prevents the Mac Pro from sleeping when the Apple Raid Card is installed.
Can users owning this setup corraborate? Is this indeed the intended way to work?
Thx,
Danas far as I know, deep sleep is only available for portable machines. if you meant regular sleep I cant help you because I haven't got a RAID card.
edit: I may have confused deep sleep with safe sleep… sorry.
Maybe you are looking for
-
SQL*Plus Worksheet DEFINE command
**I hope this is the correct place to put this, I don't see a forum for SQL*Plus Worksheet.** I am having some trouble with SQL*Plus Worksheet. The following call to a package works fine, EXECUTE package_name.procedure_name ('string_name');where it i
-
I see programming codes intermixed with emails. any fixes? email removed
just that. programming codes mixed in with emails. do i need to set something?
-
Do I have a battery charge problem? HP Pavilion Notebook - 15-p258na (ENERGY STAR)
Hi all, I bought a HP Pavilion Notebook - 15-p258na (ENERGY STAR) just yesterday, charged it fully. I notice that even after a full charge the batterly does not last very long. Perhaps two hours at most. I have had laptops in the past that can use b
-
Web service parsing soap envelope problem
I'm trying to parse an XML document found in a collection. I can do it in TOAD but get a "ORA-01008: not all variables bound" message in APEX.
-
Configuring security at cluster level!
We have a weblogic (6.1 sp3) cluster with 8 managed server instances. We are using IBM secureway for LDAP authentication. All the weblogic servers failed to respond when the LDAP server stopped for some reason. Even weblogic GUI console failed to res