IVE PAY FOR MY PACKAGE BUT CAN NOT GET IT WORK

IT KEEPS TELLING ME TO UPDATE

Hi Valentine,
Did you subscribe to one of the Acrobat online services? If so, have you tried signing in with your Adobe ID and password? That message can often mean that you just haven't signed in yet. (It can also mean that your subscription hasn't processed yet, so you may want to log in to www.adobe.com and look under My Subscriptions and Services. Make sure that the subscription you purchased is "Active."
Please let us know how it goes.
Best,
Sara

Similar Messages

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

How can I see if my program is for more than one user? We think we have bought in design for more users, but can not find out how to get in for more than one?

If you bought a CC for team, you can log in at http://adobe.com and insert the e-mail that you gave at the moment at the purchase and than you can manage and see you product/plan/team.
If I was not clear you can use the following link to help you solving your issue:
Creative Cloud Help | Manage your Creative Cloud for teams membership
If your not clear about this situation, contact with an agent of Adobe, by chat or phone. Use the following link to see the type of support you have on this matter:
http://adobe.com/getsupport
I think this will help you.
Regards

I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan

Hi Everybody,
I use an Epson Stylus Office BX320FW printer with my IMac. Since upgrading OSX, I have lost the ability to print and scan. I have downloaded printer drivers from both Epson and Apple. I am using the printer in wifi mode but can not get it print or scan. How do I uninstall the Epson software and start all over again?
nickel_man_65

Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
Someone on this forum suggested, that USB3 may interfere with the magic mouse.
I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
Thanks for the advice, Bee
Cheers, Gerd

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It te

Hello, I use MAC AIR OSX 10.6.8 and have Adobe CS2, that I was using 2 years ago on my older computer. I stopped using it because it would close down in the middle of work. Now I would like to reinstall it on the MacAir but I can not get it working. It tells Adobe doesnT support my System. But I can not update my old version or activate it. What can I do?

The mac you want to install photoshop cs2 on is running mac os x 10.6.8 Snow Leopard?
(photoshop cs2 won't run on intel macs with mac os x newer than snow leopard)
Did you ever have cs2 installed on this particular computer before?
If the problem is that you already installed cs2, but it won't activate, that's because adobe took the activation servers offline for some older adobe products such as cs2.
You'll need to use the non activation version of cs2 from here and the supplied serial number:
Activation server shut down for Creative Suite 2, Acrobat 7, and Macromedia products

I recently purchased an airport extreme base station. I want to replace my older linksys wireless router. I had a successful set up but can not get it to talk to broadband modem, I am missing something but what?

I recently purchased an airport extreme to replace my older linksys wireless router. had a successful set up but can not get connected to the internet. for some reason, which I am sure is apparent to others, i am missing some needed info to connect to the dsl broadband modem that I have. would love some good tips.

Try this:
Turn off or remove power from the DSL model, the router, and your computer. Wait not less than one minute. Restore power to the modem and wait until the status lights indicate a connection to the ISP. Next, restore power to the router and wait until the status light shows connection to the modem. Last, turn on the computer. Check your Network preferences to be sure they are configured for a DHCP connection and that the router has received a valid IP address (not 169.xxx.xxx.xxx).

I am trying to import my cd's onto itunes on a new macbook pro. i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"

i can import the cd fine but can not get track names or album art work. after going into advanced it is just coming up with "CDDB information not available"
thank you

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

HT4528 just bought a ringtone app but can not get it to work

just bought a ringtone app but can not get it to work, I can get to putting on my desktop but after that it wont tranfer to my "tones"
Angela

Contact the app developer for support.

I have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??

i have an apple i phone that is disabled because cant remember the password to get into the phone i was told to sign into i tunes to be able to unlock my phone. i have i tunes i get into on my i phone but can not get into it on my computer??

Hey grandkids7k,
Thanks for the question. The following resource provides troubleshooting information if you have forgotten your passcode:
iOS: Forgotten passcode or device disabled after entering wrong passcode
http://support.apple.com/kb/HT1212
If you have never synced your device with iTunes, or you do not have access to a computer
If you see one of following alerts, you need to erase the device:
"iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
"You haven't chosen to have [device] trust this computer"
If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
Alternatively, place the device in recovery mode and restore it to erase the device:
1. Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
3. While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
4. Continue holding the Home button until you see the Connect to iTunes screen.
5. iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.
Thanks,
Matt M.

Hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from

hello my name is leandro from months ago and am trying to connect with my apple id but informs me that it is wrong and I can not buy or upgrade my mac from the official website of apple can go with my ide but can not get response technical support'm from Argentina someone could help me

Apple ID security issues -
Call Apple Care and ask for the Account Security Team. They can assist you with your issue.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

I have a Macbook, an iPad 2, and an iPhone 4. I also have iCloud on all three devices. For some reason I can not get new information from my contacts folder to transfer to the iPad or the iPhone. Never been a problem before.

POP: yahoo, aol, comcast/time warnder/road runner
Imap: google, hotmail, and more including icloud.
If you want to use multiple devices - move to imap, I would even say "exchange", but Google does not support free exchange anymore, since January of that year. So Ironically Icloud or Hotmail would be my choices right now.
To find out more about what happens to you, search on Google "difference between pop and imap"

I brought iphone 6 for my brother but its not getting start

i brought iphone 6 for my brother but its not getting start

Howdy satyafrommumbai,
Thanks for using the Apple Support Communities.
It's not clear what the issue is with the iPhone, but if it is unresponsive, then take a look at the troubleshooting in the article below.
If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
Have a great weekend,
Alex H.

How do I insert the SIM card in the I phone 6 I have managed to open it but can not get it back in

How do I insert SIM card in i phone 6 I have used the key and taken draw out but can not get sim back in

Probably doesn't have anything you haven't already tried (i.e., push) Remove the SIM card from your iPhone or iPad - Apple Support

TS3992 i have the message that the ipad has not been backed up successfully in 2 weeks, but can not get past the message to use the Ipad

I am trying to unlock my ipad with the message that the ipad has not been backed up successfully in 2 weeks, but can not get past this screen. I have plugged it in, it is connected to the internet, but will not back up or do anything else. What can I do?

Welcome to the Apple Support Communities
Hold Sleep and Home buttons until the iPad restarts, so you will be able to use your iPad

Activatable RMI - can not get to work

Hi
I am desperate to get activatable RMI to work. I tried the Sun tutorial example and even that I can not get to work.
I would really appreciate it if someone can highlight where my stupidity lies.
Here are my sources:
Remote Interface:
package compute;
public interface Compute extends java.rmi.Remote
void executeTask() throws java.rmi.RemoteException;
Client code:
package client;
import compute.*;
import java.rmi.*;
public class Client
public static void main(String[] args)
if (System.getSecurityManager()==null)
System.setSecurityManager(new RMISecurityManager());
try
Compute comp=(Compute) Naming.lookup("//"+args[0]+"/ComputeIT");
comp.executeTask();
System.out.println("returned");
catch (Exception e)
System.out.println("Exception caught!");
System.out.println(e.getMessage());
Server Implementation:
package actengine;
import compute.*;
import java.rmi.*;
import java.rmi.activation.*;
public class ActServerImp extends Activatable implements Compute
public ActServerImp(ActivationID id,
MarshalledObject mobj) throws RemoteException
super(id,0);
public void executeTask() throws RemoteException
return;
Server Setup program:
package actengine;
import compute.*;
import java.rmi.*;
import java.rmi.activation.*;
import java.util.Properties;
public class ActServerSetup
public static void main(String args[])
try
System.setSecurityManager(new RMISecurityManager());
Properties props=new Properties();
props.setProperty("java.security.policy",
"/u/pretora/java/rmi/actsrv/security.policy");
ActivationGroupDesc.CommandEnvironment ace = null;
ActivationGroupDesc agd=new ActivationGroupDesc(props,ace);
ActivationGroupID agi=ActivationGroup.getSystem().registerGroup(agd);
// ActivationGroup.createGroup(agi,agd,0);
String location="file:/u/pretora/java/rmi/actsrv/";
MarshalledObject data=null;
ActivationDesc ae=
new ActivationDesc(agi,"actengine.ActServerImp",location,data);
Compute cri=(Compute)Activatable.register(ae);
System.out.println("Remote reference obtained");
Naming.rebind("ComputeIT",cri);
System.out.println("Remote reference bound to registry");
// System.exit(0);
catch (Exception e)
System.out.println("ActServerSetup caught "+e);
e.printStackTrace(System.out);
If I run the lot (rmiregistry and rmid (with security pol!)) I get the following exception on the server side:
java.io.StreamCorruptedException: InputStream does not contain a serialized obje
.at java.io.ObjectInputStream.readStreamHeader(ObjectInputStream.java:855)
.at java.io.ObjectInputStream.<init>(ObjectInputStream.java:174)
.at sun.rmi.server.MarshalInputStream.<init>(MarshalInputStream.java:102)
.at sun.rmi.server.ActivationGroupInit.main(ActivationGroupInit.java:52)
the client side just times out:
failed to activate object; nested exception is:
java.rmi.activation.ActivationException: timeout creating child process
It does work if I uncomment the 2 commented lines in the server setup progam and let rmid use the setup program's JVM to instantiate the ActServerImp.
Any ideas much appreciated. Thanks

I finally found my problem. By changing the codebase string in ActServerSetup.java from file:/// to http:// URL, I was able to see in Apache HTTP server's log the 404 errors for my interface classes. The line that read
String location="file:/u/pretora/java/rmi/actsrv/";
had to be changed to
String location="file:///u/pretora/java/rmi/actsrv/ file:///u/pretora/java/rmi/common/";
Now I am all set.
thanks

Flex 4 - Can not get ADG working

Hello,
I have just downloaded flex 4 SDK (flex_sdk_4.0.0.14159_mpl) and Flash Builder 4.
I have created a test prroject and can not get it working with Advanced Data Grids.
Here is my set up: Created Project called Test, this contains one MXML file that contains an Advanced Data Grid:
<fx:Script>
        <![CDATA[
            import mx.collections.HierarchicalData;
            [Bindable] private var _test:HierarchicalData;
        ]]>
</fx:Script>
<mx:AdvancedDataGrid id="test" dataProvider="{_test}">
   <mx:columns>
       <mx:AdvancedDataGridColumn headerText="COL_A" />
       <mx:AdvancedDataGridColumn headerText="COL_B" />
       <mx:AdvancedDataGridColumn headerText="COL_C" />
    </mx:columns>
</mx:AdvancedDataGrid>
This works Okay. I then include a libary into the project, the libary, also built with the same SDK, contains a class that contains nothing but one single method that does nothing:
<mx:Canvas xmlns:fx="http://ns.adobe.com/mxml/2009"
           xmlns:s="library://ns.adobe.com/flex/spark"
           xmlns:mx="library://ns.adobe.com/flex/mx"
           width="100%" height="100%">
    <fx:Script>
        <![CDATA[
            import mx.controls.advancedDataGridClasses.AdvancedDataGridColumn;
            private function test(col:AdvancedDataGridColumn):void { }
        ]]>
    </fx:Script>
</mx:Canvas>
Launcing now causes the error
TypeError: Error #1007: Instantiation attempted on a non-constructor.
    at mx.controls::AdvancedDataGridBaseEx/getSeparator()[E:\dev\4.0.0\frameworks\projects\datav isualization\src\mx\controls\AdvancedDataGridBaseEx.as:4618]
    at mx.controls::AdvancedDataGridBaseEx/createHeaderSeparators()[E:\dev\4.0.0\frameworks\proj ects\datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4660]
    at mx.controls::AdvancedDataGrid/createHeaderSeparators()[E:\dev\4.0.0\frameworks\projects\d atavisualization\src\mx\controls\AdvancedDataGrid.as:2428]
    at mx.controls::AdvancedDataGridBaseEx/drawSeparators()[E:\dev\4.0.0\frameworks\projects\dat avisualization\src\mx\controls\AdvancedDataGridBaseEx.as:4574]
    at mx.controls::AdvancedDataGridBaseEx/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\ datavisualization\src\mx\controls\AdvancedDataGridBaseEx.as:2119]
    at mx.controls::AdvancedDataGrid/updateDisplayList()[E:\dev\4.0.0\frameworks\projects\datavi sualization\src\mx\controls\AdvancedDataGrid.as:2899]
    at mx.controls.listClasses::AdvancedListBase/validateDisplayList()[E:\dev\4.0.0\frameworks\p rojects\datavisualization\src\mx\controls\listClasses\AdvancedListBase.as:3468]
    at mx.managers::LayoutManager/validateDisplayList()[E:\dev\4.0.0\frameworks\projects\framewo rk\src\mx\managers\LayoutManager.as:663]
    at mx.managers::LayoutManager/doPhasedInstantiation()[E:\dev\4.0.0\frameworks\projects\frame work\src\mx\managers\LayoutManager.as:718]
    at mx.managers::LayoutManager/doPhasedInstantiationCallback()[E:\dev\4.0.0\frameworks\projec ts\framework\src\mx\managers\LayoutManager.as:1072]
Removing the method in the libary project alivates the problem. But I can not see why this is a problem in the first place!!??!?!?!?!?!?!?
Can anyone help. this is really weird.

I'm getting the same error. This is due to a bug in AdvancedDataGridBaseEx. The offending code is:
            var headerSeparatorClass:Class =
                getStyle("headerSeparatorSkin");
            sepSkin = new headerSeparatorClass();
if getStyle returns null then you will be trying to instantiate headerSeparatorClass is going to cause the "Instantiation attempted on a non-constructor" error.
Apparently someone thought that the headerSeparatorSkin would never be null.

IVE PAY FOR MY PACKAGE BUT CAN NOT GET IT WORK

Similar Messages

Maybe you are looking for