Ive restorted my i phone 3g but it will not activate, anyone help

ive restorted my i phone 3g but it will not activate, anyone help

What is the error message provided?

Similar Messages

  • TS1398 I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

    I have an iPad 2 that is updated and using 6.0.1. It is connecting to my wifi just fine. I just purchased a 4th generation iPad. It shows it is connected to the same wifi, same strong signal, but it will not work. HELP!!!

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated

    Activation issues are almost always the result of a device that has been hacked or jailbroken.  If that is the case, no support can be provided here.

  • I added an extra full CC license to my team, but it will not activate.

    I replied the mail/activated the link. But still its says invitation send. please help, first i thought it needed time, but 2 days is absurd.. please help, since the telephone helpdesk doesn't work. thanks, grtz Bas

    Hi there,
    I had trouble activating CC. But now it’s working! Thnks!
    Grtz Bas
    Op 25 sep. 2014, om 19:29 heeft Jeff A Wright <[email protected]> het volgende geschreven:
    I added an extra full CC license to my team, but it will not activate.
    created by Jeff A Wright in Creative Cloud Download & Install - View the full discussion
    I am sorry Bas but I can not completely understand your inquiry?  Are you facing difficulty accepting the invitation?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6763573#6763573
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Creative Cloud Download & Install by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Installed Acrobat XI Standard on windows 8.1, see it in my download folder but it will not run?  Help?

    Installed Acrobat XI Standard on windows 8.1, see it in my download folder but it will not run?  Help?

    Also, once you successfully install, please backup the install file to a separate HD and/or CD. I agree that your comment is not clear. You say you installed it, but it is simply in the download folder. Did you run the install file that you downloaded? The download does not install the program, but the install is an extra step.

  • When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

    When I connect to itunes with my iphone I keep getting the error -42110 but I am able to get on itunes and download a cd but it will not sync. please help

    http://borgdatanode42.selfhost.me/blog/index.php?#param=id_48
    try to using iTunes via remotedesktop? try without.

  • IPad (Retina) on iOS 6.01 bought in UK and brought to Dubai, iMessage and Facetime activated and worked in the UK but now will not activate at all. Can anyone help...

    Hi
    I got an iPad (Retina) on iOS 6.01 as a gift in the UK and brought to Dubai.
    My Facetime/iMessage activated and worked in the UK just fine but now (even with VPN) will not activate at all.
    Can anyone help...

    Hi Bob
    With all due respect I think you are missing my point.
    I'm aware that on Apple devices bought in UAE these apps are blocked and theres nothing that can be done there. My device is bought in the UK so it has Facetime and it worked fine.
    I know categorically that iMessage works in Dubai without issue for almost everyong I know on an iPhone, I also know from seeing it that Facetime + VPN works as this gives your device a UK IP.
    My question is not the obtaining of these apps but why even with a VPN mine are not working when others in Dubai are?
    Thanks

  • My iPhone is stuck in DFU mode but it will not restore please help me!

    What happened to my phone was I was having screen issues so i replaced it and it worked normally for about 5 minutes and then the screen went black. After the screen went black, it came back on with the "connect to itunes screen". Since then i've tried to restore it and no good has cone fron trying. Sometimes itunes will tell me that it can't be restored because of the build of the phone or itunes will give me a different error code. Itunes also will make it as far as the restore screen where itunes is saying waiting for iphone and the iphone screen is on with the white loading line under the apple but the line will not move no matter how long you give it time to load. I've tried pretty much all the techniques to reslove my issue. I've even used tiny umbrella, and redsnow to try and kick it out of recovery mode but that does is make the apple logo pop up and fade out until the screen is black and then pop up again. Can someone please help me?

    It sounds to me like you either got defective parts or otherwise did not make the repair correctly. We cannot help  with self-repairs here, the iPhone officially not user servicable, but you can ask for advice in the forums on ifixit.com, a site which is dedicated to those attempting their own repairs.
    Regards.

  • I have purchased "Adobe Production Studio Premium" (2005) off Amazon, but it will not activate.

    Good day,
    I have purchased a full retail version of "Adobe Production Studio Premium" (2005) (1 user licence) off Amazon, but there are problems  to activate it.
    Tried to activate the software by internet and by phone. Both times equally unsuccessful. Eventually I have located the following link "https://www.adobe.com/cfusion/entitlement/index.cfm?e=cs2_downloads" to resolve the activation process however I could not find the exact package to correspond to my purchase "Production Studio Premium" - instead everything is splintered into different parts. Am I legally allowed to download and install the software from individual parts provided within "the link" I have mentioned or I should consider going for a refund and sending back the "Adobe Production Studio Premium" for a full refund. Bear in mind, I have no other but commercial and business intentions. Help and advise appreciated.
    Thank you.

    If you purchased the CS2 suite then you are allowed to download and install whatever you can of the software thru the Adobe site. 
    You can get more information regarding the situation with the CS2 applications/activations thru the following page:
    Activation Server Unavailable | CS2, Acrobat 7, Audition 3 -
    http://helpx.adobe.com/x-productkb/policy-pricing/creative-suite-2-activation-end-life.htm l

  • I am running Mac OSX Panther and Firefox 2.0.0.8. I want to use Intuit tax on-line and was told to update to Firefox 3.o. Downloaded 3.o(2) but it will not open. Help. Newton

    Have tried twice to download 3.o and 3.0(2). When I click on the disk image, the icon bounces once or twice, but nothing happens. I have tried placing the old versions in trash, but this did not help.

    Sorry, Firefox 2.0.0.20 was the last ever release for Mac OSX 10.3.9 and earlier versions. You can get it here, but that isn't going to help you for websites that require a Firefox 3.0+ version. You're going to have to use a different browser that's compatible with that web site, or use a newer computer that has a newer operating system to be able to install a newer version of Firefox. <br />
    https://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/

  • HT3529 I have upgraded to iOS7 and now can not get my iMessage to activate. It will not accept my Apple ID and I have tried a new password and restarting my phone but it will not activate. How do I fix this?

    I can not use iMessage or blue tooth since the upgrade to iOS7. My Apple ID is not being accepted, even with a restart and a password change. I am not receiving texts from others who are sending as an iMessage. How do I fix this?

    IF your imessage is saying waiting for activation then do this:
    backup your phone to itunes or icloud.
    then on your phone go to settings - general - reset - erase all contents and settings - this will wipe your phone clean.
    once the process is done, you can restore from the backup you made, then you should be able to activate your imessage.

  • My mail has recently started showing the wrong time. i am set to uk london time but it will not do it. help?

    i recently noticed that my mail was displaying the wrong time. i have tried looking on help and have unset and reset to london time but it makes no difference. how do i get this to go back to the right time?

    Oh my goodness this has been happening to me since 20th November. I have tried EVERYTHING. Its also effected my imessages as I had 9 come through this sunday....from before Christmas. My network provider hs told me to send it off to Apple....a 60 mile round trip and theyll possibly give you a new one as Ive not had it a year. I need my phone for work too.
    Please Apple...HELP !!!!

  • I can see the shared library, but it will not open, need help

    I can see the shared library, but when I try to open it, after a few seconds of trying it throws me out.  Need help

    Books from the iTunes Store are intended to be read using the iBooks app on an iOS device.
    tt2

  • I'm new to Mac and Adobe, I installed PSE 11 from disk on iMac but it will not open, any help would

    I'm new to Mac and Adobe (probably sounds lame :( , but anyway I installed PSE 11 from a disk and it won't open on iMac ? Any help would be appreciated.

    Can you start the Editor or Organizer from Launch Pad?
    Can you see the application correctly installed from Finder:
    Applications >> Adobe Photoshop Elements 12 >> Support Files >> Photoshop Elements 12 Editor

  • HT4061 My iphone says it needs to be activated but it will not activate- says connect to itunes but then I get activation server not available. itunes gave me an error message on my computer that it was missing some file so I uninstalled but now it wont r

    cannot reinstall itunes either now please help

    Hello there, bkorhummel.
    The following Knowledge Base article addresses the very issue you're describing:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    If the issue with the iPhone persists after the reinstall of iTunes, the following article may prove useful:
    If you can't update or restore your iOS device
    http://support.apple.com/kb/ht1808
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

Maybe you are looking for

  • ICal questions, maybe going into applescript question

    Hello, I am trying to create a recurring ICAL event with different titles for a time period.  It is simple, I want on monday of everyweek tor 7 monthes to read, week1, week2, week3 etc.  Is this possibe in ICAL, or possible via applescript (beginner

  • BOX Command in Smartforms

    Guyz, My situation is i have main window which is having 2 columns ... 1st - invoice line item text 2nd - invoice line item value requriement is i'll have to print a vertical line after the 1st column (inv line itemtext) which should draw through out

  • MX922 hangs, power switch won't turn it off. Can I get it going without just pulling the plug?

    The printer seems to do this to me about once a month. If I pull the plug and then reconnect it, that resets everything and gets the printer going again, but I get a nasty error message that I'm not supposed to do that. But what else can I do when ab

  • How to clear only blocks which have values

    Hi there, Is there anyone knows how to clear data from blocks which only have values ? so the idea, i dont have to create any new block by using something like set a block to be #MI ? Please advice. Thanks a lot R'gards Octoni

  • Loading swf files from an iPhone Air App

    Although the faq says its possible ( http://bit.ly/gyxmCo  )  I can't seem to load .swf files from my app. There's no .AS code in the .swf file I'm trying to load. PNG files load with no problems, swf's fail. A working example would be appreciated in