Ive tried every code i can think of for my phone, but i cant remember my code, now it says connect to itunes, now what am i supposed to be doing?

please help!!!!! i dont want to loose all my data, cant itunes please send it to me?

As user Wjosten previously replied to another user with that problem:
"Then you'll have to force the phone/touch into recovery mode & restore it:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still dont see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new."

Similar Messages

  • My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?

    My phone has been set up previously for itunes on my lap top but my phone now shows the connect to itunes message even though the phone is connected....Ive tried every thing I can think of ...now I cant use my phone ..please help ?

    Turn your phone off and connect your cable to the computer, but not the device just yet. Start up iTunes. Now, hold down the home button on your phone and plug it in to the cable - don't let go of the button until iTunes tells you it's detected a phone in recovery mode. Now you can restore to factory settings.
    Unfortunately, the data on your phone is already gone if you're seeing the connect to iTunes logo.

  • I just upgraded to Lion. I was trying to set up the iCloud and it asked for my "login" keychain password. I've never been asked for that before. I've tried every password I can think of and nothing works. Is there a way to reset the keychain password?

    I just upgraded to Lion. I was trying to set up iCloud and it asked for my "login" keychain password. I've never been asked for the keychain password before. I've tried every password I can think of and nothing works. I'm normally asked for the password to my machine when upgrading software, signing on, etc. but this is different apparently. I tried the same password and it didn't work either. I read a couple of posts and they all want to take me through Applications/Utilities but that requires knowing your password in order to change it. I don't know it. Don't remember ever setting up a keychain password. Does anyone know how to change the keychain password if you don't know the keychain password???

    Most of the time your Keychain password is the same as your login password. If you configured your computer to log you in automatically, you may not have used your login password in so long you forgot it.
    There is no way to retrieve the "login" Keychain password, but you can reset the Keychain from the Preferences menu: select it in the Keychain Access menu and select "Reset My Default Keychain". This will create a new, empty Keychain but the old one will be saved should you ever remember its password.
    The result of this is that you will have to supply passwords for everything that requires it, since without your Keychain they will no longer automatically fill themselves. However, once you supply them and store them in your new Keychain, they will be remembered.

  • I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists iPhoto Library as GRAY, and will not let me access it.  I need the videos out of there.  I have tried every way I can think of.

    Like the title says...
    I can't upload or import videos from my iphoto library, into final cut pro x.  When i click, IMPORT MEDIA in FCP, It lists 'iPhoto Library' as GRAY, and will not let me select it.  I need the videos out of there.  I have tried every way I can think of.
    I have also tried from the iphoto side, to export the videos or share them to final cut.  I have had no luck.
    I have tried to drag and drop indidual video clips from iphoto to fcp, and the programs simply do not respond to each other
    I can see in the OLDER version of final cut pro x, where it has IMPORT FILES as an option, it was possible.  I see this on forums and youtube videos of the older versions.
    However, the newer version that i have, does not have IMPORT 'FILES' as an option, it is simply all lumped together as IMPORT 'MEDIA'
    Thank You for the Help

    at the end, you say "import preferences", which program are you describing?
    So im safer using footage that is remotely being pulled from iphoto...
    vs
    using footage that is imported into FCP from imovie?
    Is there anything i can do in fcp to make this footage more reliable or safer or more stable as i pull remotely from iphoto?
    All the footage, and all the libraries to all programs, or on a new pegasus 12tb raid 5 setup fyi.

  • My ipod broke so a friend gave me their old ipod touch but they cant remember the code.  How can i unlock it and get it to work on my computer?  Please help

    My ipod is broken so a friend gave me their old ipod touch but they cant remember the code.  How can i unlock it and get it to work on my computer?  Please help

    The iPod needs to be restored but it only be restored from the computer it was last synced with
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iPhone and iPod touch: Unable to update or restore

  • When I got my ipod I made an account with iTunes from my ipod.yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered. HELP!!

    When I got my ipod I made an account with iTunes right from my ipod.Yesterday, I made a password lock to get into my ipod and I couldn't get into it even though I did the correct one. Now it says"connect to iTunes" BUT I can't because I never registered on the computer. I've tried holding the home and sleep/wake button for 10 sec and then only the home for 5sec and that might have reset it, but it didn't help. If any of you guys know what to do so I can unlock it I would appreciate it VERY much.

    If you haven't done so install iTunes on your computer. http://www.apple.com/itunes/
    Follow the instructions here: iPhone and iPod touch: Unable to update or restore

  • HT201304 enough to get more things, but I cant remember the code. How do I fix this?

    I set up a Restrictions code on my daughters ipod touch. Now she is old enough to get more things, but I cant remember the code. How do I fix this?

    - That is the only unless you have abackup made before the Restrictions were set up. In that case you can restore from backup.
    - To save/transfer app data such as saved games see:
    How to transfer game saves between iOS devices, without iTunes, and without jailbreaking | TUAW - The Unofficial Apple Weblog

  • I just tried to use my iphone as modem for my laptop but once i select the iphone at my network connections it ask me for my password, does anybody knows if that information is either my iphone serial number, fcc id, IC, etc

    i just tried to use my iphone as modem for my laptop but once i select the iphone at my network connections it ask me for my password, does anybody knows if that information is either my iphone serial number, fcc id, IC, etc

    If you are trying to connect via wifi to our iPhone then the password should be displayed on your phone when you go into Personal Hotspot, by default it is a random password set by the phone but you can change it there.

  • I purchaseed an app monotoricamera but i cant find this application and this app removed from iTunes store what can i do for this problem?

    i purchaseed an app monotoricamera but i cant find this application and this app removed from iTunes store what can i do for this problem? when i use report problem in purchase history " say to me this app is removed and i pay for that

    Well, if you didn't keep it in your iTunes library, on your computer, & then back that data up, you're out of luck if it's no longer available in the App store.
    Apple warns to backup your purchases for this very reason.

  • I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    I have problem with my ipad when set up ipad asked to activation but i cant remember my apple id that i used to setup.now i can not open it .Is there any way to fix this problem?

    Hello Abdo_Zain,
    I would be concerned too if I was not able to gain access to my iPad.  If you are unsure what your Apple ID is, you can find the steps in this article:
    Apple ID: How to find your Apple ID
    http://support.apple.com/kb/HT5625
    You can reset a forgotten Apple ID password by going to the following link:
    Apple - iForgot
    https://iforgot.apple.com
    Also, you may be able to skip the step of entering your Apple ID if you are setting up the iPad for the first time.
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • What is the dialog box marked com.apple.internetaccounts.xpc? It has popped up and I can't get rid of it. I have tried every password I can think of.

    This dialog box keeps popping up on my iMac. If I select cancel, it comes back. I reset my keychain yesterday because I couldn't get in. I chose a new password but it won't accept that. I've tried every password I've ever had for different Settings and am still getting no where. Another box has popped up. This one is AddressBookSourceSync wants to use the "login" keychain. I feel like I'm in a remake of "Groundhog's Day."

    Does the alert refer to "Local Items?"

  • Mini ipad has frozen and won't let me restore showng 3014 error code.  I have tried all suggestions to correct error and mini ipad is now frozen saying connect to itunes.  Can't i just reboot it somehow?

    BIG QUESTION!!!!
    My mini ipad has frozen and won't let me restore showing 3014 error code.  I have tried all suggestions to correct error and now is frozen saying connect to itunes which just shows the error message..  Can't i just reboot it somehow?

    Hi annababs,
    This article has troubleshooting specific for error 3014:
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/ts3694
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software and ensure that communication to gs.apple.com is allowed. Follow these stepsfor assistance with security software.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow theadvanced iTunes Store troubleshooting steps to edit the hosts file or revert to a default hosts file. See "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information."
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.
    If that does not work, this article may be able to help:
    iOS: Unable to update or restore
    http://support.apple.com/kb/ht1808
    Take care,
    - Ari

  • Itunes says that "it can't connect to the ipod because it is locked with a passcode". The ipod says "ipod is disconnected. Please connect to itunes". What am I supposed to do???

    I just downloaded itunes onto my new computer and im trying to sync my ipod to it to get all the music on my computer. When I turn on the ipod it says "ipod is disabled connect to itunes". when i get signed in to itunes and try to connect the ipod it says "itunes cannot connect to the ipod because it is locked with a passcode. You must enter the passcode on the ipod before it can be used on itunes." But with it being "disabled" it wont let me do anything! What do I do??

    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen        
    If recovery mode does not work try DFU mode.
      How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Mt iPad will not allow me to update my apps. My username and password are correct and I can buy apps with no problem but when I try and update it just says "cannot open iTunes"

    My iPad will not allow me to update apps although I have no problem buying new ones. It says "cannot connect to iTunes" each time I try.

    Same problem for me, too.  It happens on my iPad, iPhone, and iMac.  Weird because I have great Internet connectivity and I can log into and view my iTunes account.  I've downloaded three new apps with no problem.  But my iPad shows 14 apps needing updates, my iPhone shows 2, and my iMac shows 1.  In all cases, clicking on "update" and entering the password results in the message, "Cannot connect to iTunes Store".  It's the same result across multiple WiFi networks, even after resetting them.
    I'll see if someone at the Genius Bar can help and then I will repost.

  • HT1212 how can i reset my password on my ipod touch someone made too many attemps now its saying connect to itunes and when i connect to itunes its saying unable to connect because the phone is locked

    how can i reset my ipod touch if someone made too many passwords on my ipod touch

    Disabled
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up     
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        

Maybe you are looking for

  • Headphone jack no longer working after repair

    Recently I had a issue with my macbook pro so I had it repaired at the Apple Store(problem with the display).  They replaced the logicboard(2nd time in 4 months) and the battery.  Now after taking it hope and plugging in my external speakers into the

  • Cannot create process to handle workflow instance conversation

    <Nov 18, 2002 1:04:30 PM IST> <Error> <B2B> <000000> <<Process> Hi, Iam getting following error when iam trying to invoke subworkflow. can anyone help me in solving this problem. regards Ananth ERROR: Cannot cr eate process null.> <Nov 18, 2002 1:04:

  • Not Burning all Songs

    I'm making a couple of CDs with the same songs on them and when I burn the CD all seems good. They all show up in iTunes as being on the CD. But when I get in my car, only four of the 16 songs play. I tried a differant CD player and only four played

  • Https issues in Word 2010

    Hi, I have problems opening a file via Active X control and https and need some ideas how to proceed with the analysis. The server is a custom WebDAV implementation on a SAP Netweaver 7.40 system. The following behaviour: http works without problems

  • I am not able to fecth data using this statement

    Hi All, Iam getting problem when i was using select queiry based on vbak,vbap and konv tables. Error is i am not able to get  all condition types but i am getting only first record Example... number of the document condition which is KNUMV condition