Ive updated my iphone 4 to ios5 and the music will not play atall even though its all on the phone is anyone else having this problem?
Obviously Ive had the same errors originally but the software has updated fine now. But for some reason the music on the phone will not play atall! with or with out headphones. It seems too just be staying at 0.00mins and even if I fast forward it it just stays at the particular mins fast forwarded to. Has anyone else had this problem?
Similar symptom here. I gathered from other threads that by removing all the songs and re-sync them back to iPhone4 would sort the problem! I tried with one album and it seemed to have work fine! So I removed all the songs and transferred them back again! However, I could not launch Music app any more! Click on Music and it just stopped, i.e. could not be launched!!!
However, I noticed that I could still play all the songs through headphone control. But if you play without the headphone plugged in, no sound comes out of the phone speaker!!!!!
Aarrrgggggghhhhhhhhhhhhhh!!!!!!!!
Apple - surely you must seriously look into this and come out with resolutions by now! Would SJ step in by now????? RIP SJ! Apple, in fact all of us, miss you - with diferent reasons !!!
Similar Messages
-
I have an ipad1 and the wifi will not work. It is a wifi only model which makes it more interesting. When I go into settings, it says "no wifi". Does anyone have a solution to my problem? It is much appreciated.
If you are positive there is a good Wi-Fi signal in the area of the iPad I would first reboot your iPad. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider until the Apple logo appears. Let go of the buttons and let the iPad restart. See if that fixes your problem.
If that doesn't work, I would turn off your iPad and then restart your Wi-Fi router. Unplug the router for 30 seconds then plug it back in. Once the router had completed its restart process and established a link to the Internet then turn your iPad on. Make sure Settings > Wi-Fi> On. -
HT3310 Can't get remote and mic to work at all with my iPad. Anyone else having this problem?
Can't get EarPods remote and mic to work with my iPad 3. Anyone else having this problem and, if so, how did they fix it?
I am trying to get my USB headphone and mic to work with Skype but I'm not having any success. I have tried several different headphones with the same result.
What are the system requirements of your headphones & mics? It's possible they are not compatible w/Macs and/or your current OS system. -
Started after I updated to iOS 5.1
Art,
I am trying to follow your very precise steps, and in my case (PSE11 also, Win7), the focus stays on the edited picture after I return from the editor to the Organizer. I am pretty sure that in the previous post describing your situation, I was able to reproduce the problem, but I don't remember on which version. I just tried in 'Folders' view mode to edit in a selected folder, then I clicked 'All media' so that no folder was selected. Same result in both cases.
Even if you prefer to work in folders view, you could take advantage of the ability to use 'albums'. It's a misleading word to describe a selection, a 'collection' of pictures, which you can sort as you want. It's a kind of 'playlist' like with music items. In the organizer, you can select a folder and create an album (even a temporary one) just by choosing 'create instant album'. Suppose you have made an album from a folder or a selection of highlighted pictures to edit. You can order them in date order, import batch or 'custom' order'. Since PSE12 you can also sort them in filename order. You should never lose the 'focus' on your last edited picture when coming back from the editor to the organizer. If the purpose of that album is only to help in organizing an editing session, you simply delete the album (the playlist) if you don't want to keep the list afterward.
I hope someone will be able to confirm how that can happen...
Edit;
I have just read Brian's post.
That may be the difference... -
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/960733]]
</blockquote>
After firefox updated to version it stopped restoring the tabs from my previous session. firefox is still set to restore all tabs from previous session but it still won't work.I have had similar symptoms with some malware that was installed on a client's computer. Try to scan the computer with anti-malware software and see if the problem persist..
-
I can't backup my phone or put music or save pictures to my mac. What can I do?
iOS: Device not recognized in iTunes for Mac OS X
-
i have an iphone 4 and i just updated to ios5 and i can't get my music to stay on my iphone and i also keep getting and error message when trying to restore iphone. anyone else having this problem?
When you restore, which error # appears?
-
problem with updated find my iPhone (FMi) app: when I attempt to open the FMi app, it tells me that I need to be a registered developer and run iOS7 to do so; is anyone else having this problem? I got the app as a regular update to my existing FMi app which worked great.
The problem is being reported in the news media, yes. Apparently someone at Apple jumped the gun and uploaded the update before it was ready. They'll probably issue another update shortly, I would expect, but you can go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store. If you have a backup copy of the older version of the app, remove the newer version, restore the old version to iTunes on your computer, and resync.
Update: Well, that was certainly quick. As of a short time ago, various sites are reporting that the Find My iPhone app is no longer displaying the previous error message. If it still is for you, delete it from your iPhone and re-download from the iTunes Store.
Regards. -
After updating my 4s to ios6, I'm having the same problems with wi-fi switching to cellular on it's own and running up my data usage.....anyone else having this problem?
The iPhone is DESIGNED to switch to cellular data when asleep, unless it's connected to a power source, in which case it will stay logged onto the WiFi network. iPhones have ALWAYS behaved this way.
Either turn cellular data off at night, or leave your phone connected to a power source to continue the WiFI. -
I've updated my ipad to iso7 now the sound is distorted through the speaker and headphones, it is unusable! I wouldn't dare to update my iphone. Is anyone else having this problem? Can't seem to find any fixes online?
A reset should fix it:
Double click the Home button. Slide up with one finger on ALL your apps to close them.
Then, Press the Sleep/Wake button + Home button and hold 15 seconds or until you see the Apple logo.
This will reset your device without erasing data, apps or settings. -
After updating to iOS 8.0.2 the App Store and iTunes have disappeared, is anyone else having this problem? Help please!
Well, if they have truly disappeared then something is really messed up. For really messed up stuff, you need to set it to factory default condition, and then afterwards, restore it from your backup.
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414 -
Updated to 10.4 and the New Purchased feature is not working. Anyone else having this problem?
Updated to 10.4 and the New Purchased feature is not working. Anyone else having this problem?
I did originally, but it fixed itself after a few minutes.
-
After updating to ios 7.0.4, my ipad air will not allow me to turn on the wifi in the settings, and the bluetooth constantly shows a spinning gear in the settings. I'm currently trying to restore factory settings on the ipad for the second time. Powering off did not help. Anyone else having this problem or know of a solution?
I was going to suggest - Settings>General>Reset>Reset all settings, but if you are restoring to factory settings, that should restore the settings back to factory defaults. But if you are restoring from a backup, after restoring to factory settings, try resetting all of the settings and see if that fixes it.
It might be something in your backup. -
I just updated the OS on my IPad. I turned it off and now have retured to it and it won't turn on. Anyone else having this problem?
Lc137-
Try resetting (rebooting) the iPad. Hold both the Home and Sleep buttons for several seconds until the Apple logo appears. Ignore the "Slide to power off" arrow. The iPad will restart after a couple of minutes. Resetting this way will not hurt anything, and sometimes solves mysterious problems.
If that does not help, see if this article does: <iOS: Unable to Update or Restore>.
Fred -
I have an Iphone 5 and only a certain part of my lock button works (The back left portion) is anyone else having this problem?
im having the same problem. but its not justyou and me, its all over!!!!! My friends lock button got stuck 2 weeks after she got her iphone 5, but since its a manufacturing problem, if you go to your carrier store (verizon,ATNT,Sprint etc) and tell them whats happening, theyy have to give you another one
Maybe you are looking for
-
Arch & Windows 8 Dual Boot -- Windows Boot Loader loads grub-rescue
Arch works fine,but as it always happens Windows boot went down. Both OS are EFI. Note that boot secure and fast boot were disabled for Windows 8. I used os-prober, but did not fix anything; so, I removed it. I tried to hack things out using boot-rep
-
Mac Mini 2014 Airplay Display Disconnect Bug?
I have a 2014 Mac Mini running OS X 10.10.1 connected via HDMI to a 32" Panasonic TV model TX32LZD80. I can also connect using Airplay Display to a 40" Sony TV Model No. KDL 40V5810 via an Apple TV. The Apple TV and Mac Mini are both connected to a T
-
Number Field Issue in IPM11g!!
Hi, I have created an application in IPM11g and it contains Number type field. During the content upload through Input Agent or UI if I don't pass any value for that Number field then '0' is populated for this field. In my scenario if I don't pass
-
How can I incluce a hyperlink to TDMS file in the report?
Hi, I am storing the measured data in TDMS file in each step. File name is written to the ResultText property so it is visible in the report. I would like to have hyperlink in the report that opens this TDMS file automatically either with DIADEM or w
-
How to calculate system date through function module date
Hi friends!! i declare a variable "date like sy-datum". now i want to add 15 days to the system date, please give me the function module name which can do it. xample. date = sytem date. -> date= 13/08/2010 i want date= 28/08/