Ive upgraded to X Lion and now photobooth wont work....how do I solve this?

I did the last update like a month ago and now its not working...:0(

Hi ...
Try "resetting" ...
Hold the On/Off Sleep/Wake button and the Home button down at the same time for at least ten seconds, until the Apple logo appears.
If that didn't help, tap Settings > General > Reset > Reset All Settings
You won't lose any data as a result of a "reset" ...

Similar Messages

My twitter app worked perfectly fine before the update and now it wont work, how can i fix this?

I have uninstalled and reinstalled several times. I have also deleted my account several times and re-signed in. It is still not working. When i go to the app store, the "open" tab has a little plus at the top...what does that mean? Seriously, i just need help getting the app to work.

My twitter is doing the same thing, I click on it and just a small rectangle with everything on the usual twitter screen condensed. I tried re-installing but no luck. I reset my phone too because when I first installed ios7 my screen went black, still doesn't work. I have to use the app off of my mac for now. If you figure something out let me know and I'll do the same!

I have Mac OS (old version) Updated firefox and now it wont work, how do i go back to the old version?

Firefox no longer works because I tried to update it to the new version, but I didnt realize the new version is only for a mac os x. I need to go back to the old version and I cant seem to find it to download and i dont know how to undo the download.

http://www.mozilla.com/en-US/firefox/all-older.html
http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox

I upgraded to Mountain Lion and now I can't use any of my software!

What a disaster and huge mistake. Upgraded to Mountain Lion and now I can't run Autocad 2012 for Mac, any of my Adobe Creative suites software such as Photoshop, Illustrator.. and now I can't even do upgrades because Mountain Lion doesn't allow me to launch DMGs. I've lost thousands of $'s in software, not to mention time, but most importantly now I can't even work! I just tried to revert back to Snow Leopard by intalling it back in my hard drive and it won't let me. I never used Time Machine. Is there any way on earth I can revert back to my old operating software??? Please help. And if you haven't upgraded yet and are thinking about it. BEWARE - and don't do it. I've been reading that Mountain Lion isn't working with Microsoft applications either. Omy...I haven't even checked that.
and of course no one at Apple support can or will help me

lunaulu wrote:
It's not my Microsoft that I use much or am worried about. I can't run AutoCAD. and I can't update AutoCAD either. When I try to mount an update just to get it working, it says it can't run the DMG file. Apparantly this new platform doesn't use Rosetta - which is needed to run any of these updates or downloads. ***? and then When I try to open CS4 appliations - Adobe Photoshop, Illustrator, or InDesign - I get the message "Licensing for this product has stopped working - Error 150:30 - ***?
So basically I can't use ANY of the programs I ran before. And yes I have googled desperately all day. Adobe has some suggestions - like deleting a Flex files - which I did...Defragmenting - which I did. And most importantly provides am Adobe Licensing Repair tool to fix - which I can't open because Mountain Lion won't mount the DMG in order to run it! It's a complete disaster and I don't have the money or time to purchase and or reinstall everything. I am just screwed.
No you are not, calm down, cbs20 already gave you the answer on opening dmg files, updates are available for most of your programs and I assume you have licenses for the Adobe products. AutoCad you'll have to wait for.
And please .... Start Backing Things Up, you could lose it all without one, work included.

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do?

I've reset my PPAM before to get around Firmware lock, but I've upgraded to mountain lion and now need to do the same thing, but I can't reset the PRAM. I've heard of the chip that is on the post 2011 macs, but I must not have one? What to do? Also, I can not get start up chimes unless I have the factory startup disk in. Can the PRAM be reset with the factory startup disk in or must the mac boot from the hard drive? Need help.

Help for forgotten passcode > iOS: Forgotten passcode or device disabled after entering wrong passcode
When you have access to your iPhone again, FaceTime is a pre installed app that cannot be removed.
Try a search > iOS: Understanding Spotlight Search

I upgraded to Mountain Lion and now see "Blocked plug in" on my banking site and on Facebook I can't watch a posted video

I've upgraded to Mountain Lion and now see "Blocked plug in" when on my banking site and also when on Facebook. I've been told Adobe Flash is not a good option, any suggestions?

cin2 wrote:
I've been told Adobe Flash is not a good option, any suggestions?
Told by whom? Works here with all my sites.

I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

I upgraded to mountain lion and now iMovie dose not see my Canon XHA1 . Can anyone help?

I upgraded from the app store. It is actually quite awhile ago so I do not remember how. I think I used a thumbdrive to create some type of file. No I do not have any backups. My iLife CD is nowhere to be found because this is a very old macbook pro that I've had for a couple years.
Thanks for taking the time to help

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films.

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

I have 2nd generation apple tv, and this has always worked well with Lion, have now upgraded to Mountain Lion, and now can not connect to itunes, all other things work, can buy or rent films, but can not listen to my music or show photos. Can anybody help please?

I did have the ability to "save" in PAGES. I upgraded to "Mountain Lion", and now I can not "Save". Help please!

I used to be able to "Save" my material in PAGES. I upgraded to "Mountain Lion" and now when I go to "Save", it says "permission denied". How can I correct this?
<E-mail Edited by Host>

Several users have had this problem in Mountain Lion. The system has decided you don't have read/write permissions. Have you done any updates to your system lately? Using Disk Utility to repair permissions after any upgrade or update, especially to the system, is a good practice. So first, I would repair permissions & then if you still have the problem, locate the file in Finder & go to File > Get Info & look in the Sharing & Permissions section. You should be the only one with read/write permissions but something has happened. Click on the words under "priveledge" next to your name & change it to read & write. You will probably have to enter your admin password.

I upgraded to mountain lion and now have nothing in itunes, why

i upgraded to mountain lion and now have nothing in itunes, why

About TM "Backup Drive is Full"
Alert TM only deletes older files if they have been deleted from the source and when TM needs space on the backup drive for a new incremental backup. Time Machine "thins" it's backups; hourly backups over 24 hours old, except the first of the day; those "daily" backups over 30 days old, except the first of the week. The weeklies are kept as long as there's room.
So, how long a backup file remains depends on how long it was on your Mac before being deleted, assuming you do at least one backup per day. If it was there for at least 24 hours, it will be kept for at least a month. If it was there for at least a week, it will be kept as long as there's room.
Note, that on a Time Capsule the sparsebundle grows in size as needed, but doesn't shrink. Thus, from the user's view of the TC it appears that no space has been freed, although there may be space in the sparsebundle.
Once TM has found it cannot free up enough space for a new backup it reports the disk is full. You can either erase the backup drive and start your backups anew or replace the drive with a larger drive.

I recently upgraded to mountain lion and now cannot connect to my Brother QL-570 Label Maker

I recently upgraded to Mountain Lion and now cannot print out on my Brother QL-570 printer. I get as far as typing in the label name and then the labeller or computer disconnect. I have tried downloading drivers from Brother but they can't do that as only Apple can do that but there is nothing in Apple to do that. I also reloaded the program off the set up disc. . Any ideas?

yeah-find out where you're downloading stuff to, and stick with it. I'm using FireFox and tell it to save the driver and stuff on the desktop, and when I quit FireFox, there it is on the desktop. you'll also need your admin password. It should show up as a .dmg file, then double-click on it to open it. You should see "Brother.pkg" . start up brother.pkg (double click??) and folow the instructions that ought to appear to install the printer driver. If the .dmg file doesn't mount, use Disk Utility** to mount it and get it working. Then you should see the package. and then you can install it.
** you may have to click on the .dmg file and choose "Get Info" then Open with, then choose disk utility, and then open with then change all. then close it. Hopefully that ought to work. If you cannot remember your admin password, I can't help you right now. Looks like you'd need it, to let Brother install that printer driver.
well, enough for tonight
if this didn't help you, then ask me again tomorrow
John b

HT1689 I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

I just upgraded to iTunes 11 and now I get a "itunes cannot connect with this ........ Could not allocate a resource. Happens with both ipad and iPhone. Any thoughts on how to resolve this issue?

Same for me with Iphone 5 and IOS 7 on mac pro. Install ITunes 11.1 and after reboot nothing work. Work only with Mac Pro in safe mode.
I have uninstalled Wi-fi-sync1.0 app from MacPro and Itunes sync well with iphone.

A friend upgraded my flash player and now nothing will work.

I am completely computer stupid. My friend said that my flash player needed to be upgraded. He upgraded it for me and now nothing will work. Youtube, games, etc. Can someone help me fix it. Like I said I am computer stupid so I will need step by step instructions if anyone can help.

amhinton1 wrote:
in Windows/system32/macromed/flash is a text document called FlashInstall.
This means that Flash Player is not installed - the required files should be in this folder.
Download this installer http://www.adobe.com/go/full_flashplayer_win_ie; save it to disk (e.g. your Desktop), then close all browser windows and run the downloaded installer.
What do you now have in that folder?
Is Flash Player now enabled, and is it working? (Check it here http://www.adobe.com/software/flash/about/)

The new itunes update will not install properly and now itunes wont work at all

k, so I tried installing the new update for itunes and now it wont work at all. it says that the mobile device isnt installed. i have uninstalled and reinstalled itunes 4 times now.

My issue is it wont even reinstall onto my computer
Yes I'm aware of that. The procedures are also for trying in cases where iTunes can't be reinstalled due to a "Could not start Apple Mobile Device service" message.
If you're getting a different error message relating to the Apple Mobile Device Service (or Apple Mobile Device Support) when you try to reinstall iTunes, post back to let us know what that error message says. (Precise text, please.)

I accdently formated my shuffle and now it wont work what do i do?

I accdently formated my shuffle and now it wont work what do i do?
That and when I plug the shuffle in to the comp iTunes doesn't reconize that the shuffle is pluged in.
it has updated a-few times. and when iTunes sees that the shuffle is in the comp it tells me that the songs are on the shuffle.............but when i unplug it and put my headphones in no music comes out of it!
so what am i to do
shuffle 512MB Windows XP

I'm having the same problem! My good-for-nothing brother has formatted iPod shuffle through "My Computer" and now it won't work. Neither iTunes nor iPod software updater recognise the thing. To be honest, neither application even start when the shuffle is plugged in! And now I've just read that apple says you "SHOULD NOT FORMAT" shuffle. What am I to do? Have I lost my iPod for ever?

Ive upgraded to X Lion and now photobooth wont work....how do I solve this?

Similar Messages

Maybe you are looking for