IView development guide?

Hello,
I'm quite new to SAP EP and as my installation of the EP 6.0 is working fine, I would like to start developing Java-IViews.
I have the SAP Netweaver developer studio installed. What I am searching for now is something like a step-by step guide to Java IView development.
Are there any suggestions where I can find this?
Thanks!!!

Hi,
This might help u:
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/d-f/developing java iviews.abst
Regards,
Pooja.

Similar Messages

BLOBs Oauth2 in New RESTful svcs developer guide

Hi, All,
In case you are not aware, there is a new RESTful Services Developer Guide -- but it is in the download for the Listener 2.0.2!! Not sure it is posted also on the Apex 4.x documentation. It should be. It has a nice walk-through for creating an "Image Gallery Application" along with the RESTful services required to upload and download images--but it would have been much better if done differently (see comment below). I am needing to adapt this to just download images from an existing BLOB object. It also has a demo walk-through of OAuth2.0, however, I wish they would do a better job of explaining where the 'https://server:port/i/oauthdemo/gallery.html' comes from or is created.
My problem with the documentation is that it is a 'tutorial' but really should be broken down so that the user has a better UNDERSTANDING for the whole process. Why do an application that does a POST and GET at the same time. The tutorial idea is great, but break it down to 2 separate parts so you understand the PUT part for those who are needing to upload images and do a separate part for the GET for those like me who just needed to see how to do a GET with a header parameter ID and render the BLOB image.
The OAuth2.0 example has a similar issue but in this case it is too tied to the example tutorial and there is no explanation of where the "Redirect URI" 'https://server:port/i/oauthdemo/gallery.html' comes from. (maybe I am missing something?)
If anyone has success with these demos and applying them beyond the specific tutorial please share!!
Pat

The alter move table with the LOB storeage clause will rebuild the table and the LOB segment storing the LOB column data inor out of line as specified in the command. Rebuilding the table is the only way to move the existing inline data to being out of line.
HTH -- Mark D Powell --
Edited by: Mark D Powell on Aug 31, 2011 8:24 AM

Status of ADF BC / JSF Version of Developer Guide?

Can anyone provide an update on when this will be available (Developer guide based on ADF BC and JSF vs. Toplink)? I'm EAGERLY awaiting - this will be very helpful.
I was able to download the SRDemo app based on ADF BC / JSF - this is very helpful to see some real code examples. For example, I read topics related to programming View Objects and Application Modules, but viewing the actual code examples for how to call these methods was invaluable. Any other sources for ADF BC / JSF Technology scope code examples greatly appreciated.
Thanks

Hi,
I think this information is what you can already get from the SRDemoBc application. I remember from an internal training i delivered that the login is performed by a ViewObject that is acting as the root VO for all application VO. In addition, to store global values, a VO is created that doesn't use queries.
Note that I am not really a suppoter of applications that handle the login logic in itself. Its good for demos, but in praxis they should use either JAAS or J2EE authentication to fit into an overall enterprise security strategy.
Frank

LCCS Developer Guide not available in PDF format?

When I click on the pdf link I get: You are not permitted to perform this operation.

I click on the LiveCycle Collaboration Service developer guide link on
http://www.adobe.com/devnet/flashplatform/services/collaboration.html
That takes me to http://learn.adobe.com/wiki/display/lccs/LiveCycle+Collaboration+Service.
I click on the PDF Version link there, and it takes me to http://learn.adobe.com/wiki/spaces/exportspace.action?key=lccs,
which says "You are not permitted to perform this operation."

Oracle Database Express Edition 2 Day Plus Java Developer Guide??

I posted in the JDeveloper forum, as well as sending email via your feedback link found on the tutorial but I am a little disappointed by this:
The Oracle® Database Express Edition 2 Day Plus Java Developer Guide has some errors in it.
in Windows, I simply chose, start
-> programs -> Oracle Database Express Edition -> Go To Database Home Page -> click documentation from the link -> and run the Oracle® Database Express Edition 2 Day Plus Java Developer Guide tutorial.
the problem is there are mistake(s) in the tutorial, for example: section 4-19 is this:
"The complete code for the method should now be as follows:
public boolean authenticateUser(String userid, String password,
HttpSession session) throws SQLException { "
it needs to be this:
public boolean authenticateUser(String jdbcURL, String userid, String password,
HttpSession session) throws SQLException {
Also:
there is no mention that :
the port and SID must also be passed in the
ds.setURL(jdbcUrl) found in the authenticateUser() method, or an exception is thrown. This differs from value of the jdbcUrl string found in the getDBConnection() , which makes it hard to figure out
The tutorial is great even if it doesn't work out of the box, but I am disappointed that errata or completed code for this project is not available, especially when you explicitely point to it via the steps mentioned above.
Thanks,
Patrick

The tutorial seems to be using the old JDeveloper 10.1.2.
If you are aiming to learn JDeveloper then just use the tutorials linked from the JDeveloper home page.
http://www.oracle.com/technology/obe/obe1013jdev/index.htm

Where I can download the bundle of "Java Plug-in 1.4 Developer Guide"

I want to download all the doc of "Java Plug-in 1.4 Developer Guide" on
http://java.sun.com/j2se/1.4/docs/guide/plugin/developer_guide/contents.html

You can download the whole JDK documentation or here: ftp://ftp.java.sun.com/docs/j2se1.4/developer_guide.pdf

Calling and executing a function module in the Portal iview development

Hello Portal development gurus...
I am very new to portal iview development and am learning a lot of stuff.. I now have a requirement to do the following:
1. I need to use the NWDS to create java code in developing an iview
2. I need to call and execute a function module and display the parameters pulled in from the function module onto a Jsp.
3. I need to create an iview based on this deployed component.
Could anybody please explain me how to do the coding on this front?
I appreciate if anybody can share documentation about this kind of a development.
As always, points galore for useful and helpful suggestions.
Regards,
~~~LB

Hi,
Firstly Have you searched in SDN for the same, anyhow please go through the link to work on the requirement
[/docs/DOC-8061#15|/docs/DOC-8061#15]
Go through the thread which will talk in detail
[https://forums.sdn.sap.com/click.jspa?searchID=19551584&messageID=6348955|https://forums.sdn.sap.com/click.jspa?searchID=19551584&messageID=6348955]
Hope this helps.
Cheers-
Pramod

Downloading of Oracle 10g Reports developer guide

I have to download Oracle 10g Reports developer guide in pdf format.
so can you please send me exact URL of it .

Hi,
Building Reports:
http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B13895_01/B13895_01.pdf
Publishing Reports to the Web: http://download.oracle.com/docs/cd/B25016_08//doc/dl/bi/B14048_02/B14048_02.pdf
Regards
Rainer

File Upload Example in ADF Development Guide

I tried to upload a file using ADF as described in Development Guide. I have taken a <af:inputFile> component as described.
<af:inputFile label="#{res['srfileupload.uploadlabel']}"
valueChangeListener="#{backing_SRFileUpload.fileUploaded}"
binding="#{backing_SRFileUpload.srInputFile}"
columns="40"/>
[Page 620]
Now, what is the type of that variable "srInputFile" in the backing bean?
Is there any full written code for this ADF Development Guide example? Where from can I download that?

All the needed code is on page 617 of the ADF Dev Guide 10.1.3
http://download.oracle.com/docs/pdf/B25947_01.pdf
It is also located in the SRDemo ADF Tutorial support files
http://download.oracle.com/otndocs/products/jdev/10131/ADF_tutorial_setup.zip

2 Day Plus Application Express Developer Guide - error?

Good day !
In "Oracle Database Express Edition 2 Day Plus Application Express Developer Guide" chapter 8 "How to Upload and Download Files in an Application" at the topic "Store the Document in a Custom Table" ( page 8-10, 8-11) is recommended:
6. Under Source, replace the process with the following:
IF ( :P1_FILE_NAME is not null ) THEN
INSERT INTO file_subjects(id,NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE)
SELECT ID,:P1_FILE_NAME,:P1_SUBJECT,blob_content,mime_type
FROM HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
WHERE name = :P1_FILE_NAME;
DELETE from HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
END IF;
7. Scroll up to the top of the page and click Apply Changes.
After this I receive Error Message:
ORA-06550: line 6, column 1: PLS-00103: Encountered the symbol "WHERE" when expecting one of the following: begin case declare else elsif end exit for goto if loop mod null pragma raise return select update while with << close current delete fetch lock insert open rollback savepoint set sql execute commit forall merge pipe
Now I can't find mistake. Please, help me ( if difficulties not so big )
Winni

Replace by:IF ( :P1_FILE_NAME is not null ) THEN
INSERT INTO file_subjects(id,NAME, SUBJECT, BLOB_CONTENT, MIME_TYPE)
SELECT ID,:P1_FILE_NAME,:P1_SUBJECT,blob_content,mime_type
FROM HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
DELETE from HTMLDB_APPLICATION_FILES WHERE name = :P1_FILE_NAME;
END IF;The second WHERE clause is superfluous.
Regards, Marc

PDF (Oracle ADF Developer Guide 10g Handbook) not found

Hi all,
I try to open : http://www.oracle.com/technology/products/jdev/collateral/training10g.html
to download PDF file [ [b]Oracle ADF Developer Guide 10g Handbook (free)
JSF, ADF Business Components tech stack.]
but when i try to click on book link , oracle send me to other subject "Oracle Application Development Framework Developer's Guide for Forms/4GL Developers"
Please any body help my, because i need this book soooooooo much ASAP

Dear MarkP
Have a nice day,
Thanks for your link but this guid is ( Oracle ADF Developer Guide 10g Handbook JSF, EJB 3.0, TopLink tech stack.)
What I need is (Oracle ADF Developer Guide 10g Handbook JSF, ADF Business Components tech stack.)!!!!
BR

Java developer guide

Hi,
in Documentation Library of Oracle DataBase Express Edizion (XE) there is a documentation "java developer guide part number b25320.01". There are other of the such "java developer guide b25320.01" for begining with Jdeveloper?
Sorry for my bad English...

Try our tutorials page:
http://www.oracle.com/technology/obe/obe1013jdev/index.htm
And the books on the ADF learning center:
http://www.oracle.com/technology/products/adf/learnadf.html

READ THIS FIRST: Check out the Developer Guide, other forums and Wikis

The Portal Content Development forum is one of the most-active forums on SDN, and many, many experts read it and can answer your questions.
Before posting, please check out the following sources of information:<ul><li><b><a href=http://help.sap.com/saphelp_nw04/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Portal Developer Guide</a> (2004) </b>and<b> <a href=http://help.sap.com/saphelp_nw2004s/helpdata/en/19/4554426dd13555e10000000a1550b0/frameset.htm target="_blank">Running an Enterprise Portal (developer guide)</a> (2004s):</b> This is THE source for information on portal APIs. All of the public APIs are documented here. </li>
<li><b><a href=https://wiki.sdn.sap.com:/wiki/display/EP>Portal Wiki</a>:</b> See below.</li>
<li><b>This Forum:</b> Someone probably has already asked your question. Before adding another post, check if you can find a similar post that has sufficient information to help you. </li></ul>
<h3>Other forums</h3>
<li>Employee self service questions: https://forums.sdn.sap.com/forum.jspa?forumID=267</li>
<li>Visual Composer questions: https://forums.sdn.sap.com/forum.jspa?forumID=58</li>
<li>Web Dynpro for Java questions: https://forums.sdn.sap.com/forum.jspa?forumID=52</li>
<h3>More on Wikis</h3>The recently announced Wiki functions of SDN will, over time, be a great start for getting information about portal development and implementation...
The main wiki portal page is <a href="https://wiki.sdn.sap.com:/wiki/display/HOME/Portal">here</a>.
Please read this before asking a question in the forum - believe me, there are not many new questions being asked!
There is quite a bit of repetition in forum questions, and maybe if people are directed to the wiki page as a first step, it may make it easier to watch this forum.
The Wiki concept is all about sharing within a community, so feel free to modify the content - more accurately 'our' content - and maybe start some other pages, such as one about modifying logon pages - a fairly consistent topic in this forum
Edited by: Michael Nicholls on Feb 18, 2009 9:48 AM
Edited by: Michael Nicholls on Feb 18, 2009 9:49 AM

Dude thank-you for your wonder detailed knowldge, I have descovered that lets say xp 1700 in a ultra 2 can only handle at the most 143fsb mult at 12.
Given the settings" irq's are a major",part of directing traffic and power? example:
Sound blaster Live , uses two irq's most common at"Auto" is, irq 10, or 5, and Sound blaster 16 emulation usually takes irq 5,. I have found that the sound card in slot3 works great , but to do this I had to change the Bio's and assign slot 3 irq 7 . and make sure printer port has share irq enabled
Problems that accure with bad traffic are like this. Start a dedicated server. minimize than start your game?":censored: no sound what could be wrong"? Shoot another problem Connection problem?. The computer nerd is getting trouble over the ordeal. ANSWER! IRQ can fix the problem, Study the irq and make changes as you go. "what would it be like with no stop signs,,,that is the same as a irq. with the same knowldge this topic brings IRQ need to be clearly understood.
I can honestly say my system is error free and running like a dream.
xp 2500 barton 333
creative sound 5.1gamers.
512 mb kingston ram 400 mhz
boadband either onboard.
MSI 5700 128 mb ddr
Setting are:
163 fsb
mult of 11
ddr 333
video memory clock down to 450mhz
3d clock to 390mhz
The delta is a smooth running board also I want to mention to the person with crackling sounds, change the irq like I did, that fix the problem and the power is totaly too good to be true.

Error Deploying Sample Portal from Development Guide

I am going through creating a New Portal from WebLogic Portal 7 Development
Guide and I am running into the following problem.
After completing Step 2: Create the New Portal, when I try to Hot Deploy the
application, I get the following error.
Hot deploy failed with the following message:
Unable to add module: NewPortalWebApp to application descriptor for:
portalApp.
The log has the following information..
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
portlets\Portlet1.portlet to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\tools.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\webflow-extensions.wfx to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\user_account.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\portal.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\security.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\NewPortal.portal to sync list.
Attempting sync...
Sync complete.
Searching for portalApp application descriptor...
Found it.
Error - please check log for details.

That's great, Mike, you're welcome. I'm glad it's working for you. Thanks for letting me know.
-Scott
Mike Friesen wrote:
I'm sorry you were right.. I tried it and everything works... thanks..
Mike
"Scott Ellis" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
I hear what you are saying and I believe you. But the error you describedis the known issue related to Internet access
(down to the exact line numbers in the stack trace). Is it possible yourconnection was down last time you attempted
hot-deploy?
If you are sure your Internet connection is up, I would recommend tryinghot-deploy again. If it still does not work,
something very strange is going on. At that point I would recommendtrying the workaround anyway or escalating the issue
to BEA Support.
Now my curiosity is piqued so I hope you'll let me know either way.
Best Regards,
Scott Ellis
BEA Systems
Mike Friesen wrote:
yes..
"Scott Ellis" <[email protected]> wrote in message
news:[email protected]...
Can you please try something for me? Paste the following URL into abrowser:
http://java.sun.com/dtd/application_1_3.dtd
Does it come up?
Thanks,
Scott
Mike Friesen wrote:
Actually, my computer does have internet access, so I don't think that
is
the problem.
Mike
"Scott Ellis" <[email protected]> wrote in message
news:[email protected]...
Hi Mike,
I would bet that you are working on a machine that doesn't have
Internet
access, correct?
The problem is that the EBCC is trying and failing to access the J2EEapplication descriptor
dtd from Sun's website.
If you can't get Internet access, here is the workaround:
- save the attached file to your harddrive (just save it to c:\)
- edit the application.xml file for your project as follows:
- first copy the entire DOCTYPE declaration and save it somewhere
in
a
separate text file (in case want to revert back to it later)
- edit the DOCTYPE declaration so that it looks like this:
<!DOCTYPE application PUBLIC '-//Sun Microsystems, Inc.//DTD J2EEApplication 1.3//EN' 'file:///application_1_3.dtd'>
( notice that the java.sun.com web address is replaced with the URI
to
the file on your harddrive)
- save your changes and hotdeploy will work with or without Internetaccess
Thanks,
Scott Ellis
BEA Systems
Mike Friesen wrote:
I am going through creating a New Portal from WebLogic Portal 7
Development
Guide and I am running into the following problem.
After completing Step 2: Create the New Portal, when I try to Hot
Deploy
the
application, I get the following error.
Hot deploy failed with the following message:
Unable to add module: NewPortalWebApp to application descriptor for:
portalApp.
The log has the following information..
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
portlets\Portlet1.portlet to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\tools.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\webflow-extensions.wfx to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\user_account.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\portal.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\security.wf to sync list.
Adding file:
C:\bea\user_projects\myNewdomain\beaApps\portalApp-project\application-sync\
webapps\PortalWebApp\NewPortal.portal to sync list.
Attempting sync...
Sync complete.
Searching for portalApp application descriptor...
Found it.
Error - please check log for details.




<!ELEMENT application (icon?, display-name, description?, module+,
security-role*)>

<!ELEMENT alt-dd (#PCDATA)>

<!ELEMENT connector (#PCDATA)>

<!ELEMENT context-root (#PCDATA)>

<!ELEMENT description (#PCDATA)>

<!ELEMENT display-name (#PCDATA)>

<!ELEMENT ejb (#PCDATA)>

<!ELEMENT icon (small-icon?, large-icon?)>

<!ELEMENT java (#PCDATA)>

<!ELEMENT large-icon (#PCDATA)>

<!ELEMENT module ((connector | ejb | java | web), alt-dd?)>

<!ELEMENT role-name (#PCDATA)>

<!ELEMENT security-role (description?, role-name)>

<!ELEMENT small-icon (#PCDATA)>

<!ELEMENT web (web-uri, context-root)>

<!ELEMENT web-uri (#PCDATA)>

<!ATTLIST alt-dd id ID #IMPLIED>
<!ATTLIST application id ID #IMPLIED>
<!ATTLIST connector id ID #IMPLIED>
<!ATTLIST context-root id ID #IMPLIED>
<!ATTLIST description id ID #IMPLIED>
<!ATTLIST display-name id ID #IMPLIED>
<!ATTLIST ejb id ID #IMPLIED>
<!ATTLIST icon id ID #IMPLIED>
<!ATTLIST java id ID #IMPLIED>
<!ATTLIST large-icon id ID #IMPLIED>
<!ATTLIST module id ID #IMPLIED>
<!ATTLIST role-name id ID #IMPLIED>
<!ATTLIST security-role id ID #IMPLIED>
<!ATTLIST small-icon id ID #IMPLIED>
<!ATTLIST web id ID #IMPLIED>
<!ATTLIST web-uri id ID #IMPLIED>

User defined deployment procedure (UDDP), directive, etc. reference or developer guide

Hi,
I try to make custom provisioning procedure with custom sw library component. But I don't know and find how can I refer to a sw library component from a directive.
Actually it would be really useful to get such a reference or documentation where I could find predefined variables, syntax of the usage etc.
Many thanks in advance.
Peter
!UPDATE!
I found it:
${ora:getEntityURN('Component directory/component name')}
But still don't find any documentation or developer guide.

Please refer to thread [Authorization Error|WDA adobe error] where various solution to the problem specified by you are described.
Regards
Rohit Chowdhary
Edited by: Rohit Chowdhary on Apr 7, 2009 9:41 PM

IView development guide?

Similar Messages

Maybe you are looking for