Iview height is not changing

Hi Experts,
I have a problem in fixing the iview heights
I have 4 iviews in a page and I am using 2 columns page layout.
Each column contains two iviews.
First column first iview and second column first iview are in same alignment.
Now I want to align the other two iviews.
for this I used fixed type for the top iviews in both columns, but they are not working
Any sugesstons would be appreciated.
Raghu

Hi Sandeep,
How ru?
The problem is not solved , we just came to a conclude.
The iview I mentioned is a copy of tool area iview in the portal masthead. I am using this iview at some other place in my portal.
I am able to change the iview height for all the iviews except this iview.
May be it is a standard iview and that is the reason why it is not changing.
Appreaciate your input on this. Thank you
Raghu

Similar Messages

Cognos iView Name Property not changing

Hello,
I have some Cognos iViews that was imported into the portal. These iViews are pretty much similar to other SAP iViews with the addition of some CPS properties which is Cognos specific. I'm able to change the name of the iView but the change did not apply to the PCD object or at run time. The Name property shows the changed name but just didn't apply.
Upon looking into this further and wondering where the default name is coming from, it seem to be set at the ID level. I went to change the ID and seen the property where you change the object name but it's greyed out. I believe that's because the SAP Portal version that we're on. So, I'm unable to change this property.
First off, is there a way to override the defualt property object name setting?
Secondly, if no to the first question, is there a way to activate the object name setting so it can be changed?

Thank you very much for that suggestion. That process worked!
I did have to export the role in the PCD to XML and then edit the instance of the iView's name to be a space. I was then able to re-import the role with out any problem.
If anyone else runs in to this, make sure that you set all properties on the object you need to re-name <u>before</u> you export it. Otherwise as soon as you open the object you'll get the same error.
Next I am going to create a ticket with SAP about this problem. I can see why they would not want to allow a null value in a property but they should allow a space.
Thanks again,
Steve

Height of a Tile (or orther container) not changed after inserting nodes

Hi,
I am a javafx beginner and I'm struggeling with the size of the containers. Here is what I try to do:
I am making a photo gallery in which an Album can contain subalbums and photos through which a user can scroll. The Album objects are stored in a Tile, the Photo objects in another Tile. These Tiles I want to display vertically in a VBox, which is in turn placed on a Clipview. Now my problem is: the height of the Tile is not changing when I insert Photos or Albums in the Tiles. And I need these heights (or that of the VBox) to do calculations for my scrollbar. When I print the bounds for the album Tile before inserting Album objects everything is 0, which is correct. But when I print the bounds after insertion of 10 Albums the height is given as the height of only 1 Album, even without hgap and vgap. The height of the VBox is also equal to this height of 1 node.
What am I missing here? How can I get the correct height to use for my scrollbar calculations?
I hope you can help me out, because it's hunting me for days now :-)
Thanx,
RedMary

Well, that's one of the mysteries of JavaFX: the initialization order... :-)
When you create the custom node, it is not yet in layout, so the tile isn't laid out either, and its dimensions aren't final.
If I add a button to the scene to dump the data, you can see the final dimensions.
I also tried a trick this week-end, to override doLayout to know when a node have been laid out. A quick test shown mixed results, but perhaps it can be a starting point.
class Gallery extends CustomNode {
    var albumList = Tile {
        width: 1000
        vgap: 25
        hgap:25
        content: []
    var photoList = Tile {
        width: 1000
        vgap: 25
        hgap:25
        content: []
    var box = VBox {
        spacing: 50
        content: [albumList,photoList]
        override function doLayout(): Void
            super.doLayout();
            ShowData("After B layout");
    public override function create(): Node {
        ShowData("Before insertion:");
        for (i in [1..10]) {
             var rect = Rectangle {
                 width: 100;
                 height: 100;
                 fill: Color.RED;
             insert rect into albumList.content;
         for (i in [1..15]) {
             var rect = Rectangle {
                 width: 100;
                 height: 100;
                 fill: Color.WHITE;
             insert rect into photoList.content;
        ShowData("After insertion:");
        var group = Group {
            content:[box]
            override function doLayout(): Void
                super.doLayout();
                ShowData("After G layout");
        return(group)
    function ShowData(msg: String): Void {
        println("==> {msg}");
        println("albumList LayoutBounds:{albumList.layoutBounds}");
        println("albumList BoundsInLocal:{albumList.boundsInLocal}");
        println("albumList BoundsInParent:{albumList.boundsInParent}");
        println("box LayoutBounds:{box.layoutBounds}");
        println("box BoundsInLocal:{box.boundsInLocal}");
        println("box BoundsInParent:{box.boundsInParent}");
Stage {
    title: "Application title"
    width: 1000
    height: 800
    var gallery = Gallery {}
    scene: Scene {
        width: 1000
        height: 800
        fill: Color.BLACK;
        content: [
            gallery,
            Button {
                text: "D"
                action: function (): Void {
                    gallery.ShowData("On button click");
}

Excel row height changes when it should not change

I have a client using Office 2010 on a Citrix server. They are using Windows XP Pro SP3 for the desktop and the server is running Windows Server 2003 R2 STD.
I have two users working in a spreadsheet in Excel 2010. The spreadsheet opens fine and they can perform their updates by either adding manually or doing a cut and paste. The problem comes up when all of the sudden a number of rows in the spreadsheet
change height for not reason. The spreadheet has the row height set to 14.5 but for some reason the rows that change height sent the height to 405.9. Usually all the user has to do is go back and reset the row height on these cells and save before they can
go back to making changes.
It's more annoying then anything else so if someone could provide any solutions, it would be greatly apppreciated.
thanks, Joe Trainor
Joseph Trainor [email protected] Weidenhammer Systems Wyomissing, PA

I have been working with Excel for 20years, and have been hit with this resizing of row height and also drawings or shapes, after opening an old XL97-2003 file.
Chad's method below works!
Please try the following to resolve the issue:
1. Boot Excel 2010
2. Open [Excel Options] dialog. ([File]-[Options])
3. Select [Advanced] tab, turn on [Cut, copy and sort inserted objects with their parent cells] option. (In [Cut, copy and paste] section)
*This will not resize rows that are currently set to 409.5 but I would like to know if this keeps rows from doing this in the future.
1) I found that after opening the workbooks the row height and shapes are correct.
2) Save the file, then save as to the new .xlsx format (for a macro free workbook)
3) After reverting to former; turn OFF[Cut, copy and sort inserted objects with their parent cells] option. (In [Cut, copy and paste] section), and then opening the XL97-2003 files, the fault is still there. For the newer xlsx files, though,
the fault has gone.
4) So yes, Chad, it does keep rows from doing this in future, if the newer file format is used. Thanks.
Chad's answer is "the answer"!

ESS iviews height / size issue

Hi,
My ESS iViews (Web Dynpro Java) are appearing not in full height in the content area but a vertical scroll bar appears on right side. I tried following setting, though none worked:
- Height type to "Automatic" for both iView and Page and resetting Maximum Automatic height to a higher value i.e. 1500 pixels.
- Height type to "Full Page" for both iView and Page.
- Height type to "Fixed " for both iView and Page, setting "Fixed Height" value to higher value, 1500 pixels.
- Hight type to "Fixed" for Page, setting "Fixed Height" value to higher value, 1500 pixels and iView Height type to "Full Page".
- Hight type to "Fixed" for Page, setting "Fixed Height" value to higher value, 1500 pixels and iView Height type to "Automatic".
- Setting iView Isolation method to "URL" instead of "Embedded".
I searched the forum thoroughly for solutions, thus resulting in above Permutations but none worked. I tried searching for any suitable SAP Notes but could not find any for Web Dynpro Java, though there are a few for Web Dynpro ABAP.
Please help.
Thanks,
Aditya.

Hi All,
I tried with clearing the navigation cache and browser cache, opened the delta-linked iView from Page object and found same height values as that of iView object. This problem is appearing right since the ESS BP was installed. No changes were made to the framework page or desktop inner page. Other standard and custom iviews are appearing fine.
Is there anything from SPRO configuration (Homepage framework) that drives the iView/Page Appearance-Size property ?
I tried several combinations as mentioned above but of no avail.
Any help would be highly appretiated.
Thanks,
Aditya.

Increase Iview height

Hi all,
I am displaying a page with one Iview (layout 1 row and 1 column Full width) on Portal. Page is displaying as per application but the problem is that it takes a limted hieght area to display. When I want to see the lower part of the application I need to scroll down the Iview to see the content.
Is there any way to increase the Iview height on Portal page. FYI.. I am using Web-dynpro Iview.
I also checked the Fixed and automatic property but it was not changing anything.
Please suggest.
Thanks
Sanket sethi

You are asking for Isolation method of WD ABAP Iview, Actually I am already using URL Isolation Method for WD Iview.
Or Is there something seperate URL Iview when we are going to create an Iview.
Please suggest.

Image will not change on the Browser...Saving on the Tomcat Problem...HELP

Hi,
I worte a Servlet project using JBuilder 7 and TOmcat 4. THis is basically what i am doing...
I am getting an image from database and saving it to a folder in tomcat and then displaying it on a browser.
This application is used by multiple users...
I am saving the Image in Tom-cat...C:\JBuilder7\jakarta-tomcat-4.0.3\webapps\examples\Image1.jpeg
I am also displaying the image from that folder. The problem is when i run the application,
I am seeing the same Image on the screen..Its creating the different Image file, but the image is the same.
If i do a refresh on the page then it displays the new saved Image...
Also, If i save the image on my local and then display it from my local it changes the images as I
click on a Image list...
Following is how it works when i save it and display it from my local, but if i run my application from
another computer i am not able to see any of the images....Because its on my local.
fos = new FileOutputStream("C:/Image1.jpeg");
<img src="file:///C|/Image1.jpeg" height="855" name="myimage" align="middle" style="position:absolute;">;
And this is how i am doing when i am saving to the tomcat....I am able to display it on another computer
but would not change the image...
fos = new FileOutputStream("../webapps/examples/Image1.jpeg");
<img src="../Image1.jpeg" height="855" name="myimage" align="middle" style="position:absolute;">;
Can some one please tell me what could be the Problem....
Any help will be greatly appreciated....Thanks...

The browser caches images so that it doesn't have to always download the same image for different pages.
You could:
1: Save the new image with a different name and dynamically change the name in the html.
2: Try setting the response headers to prevent the browser from caching the images.
response.setHeader("Pragma", "no-cache");
response.setHeader("Cache-Control", "no-cache");
response.setDateHeader("Expires", 0);

URL iView content translation not working using Portal Content Traslation

Hi All,
I am using Portal Content Translation to translate text of URL iView from English to Spanish. I am unable to do so. I have followed the below mentioned link:
http://help.sap.com/saphelp_nw04/helpdata/en/74/641640b7b6dd5fe10000000a155106/frameset.htm
I have used Content Admin -> Portal Content Translation -> Translation Worlist Coordination to:
1) Generate worklist and add content
2) Generte translation data
3) Release for translation
After this, I am using Content Admin -> Portal Content Translation -> Worklist Translation for following:
1) Load worklist for translation
2) Translate worklist
I am facing difficulty in Translate Worklist. The step by step method followed by me are as below:
I am clicking on Content Admin -> Portal Content Translation -> Worklist Translation.
I am searching Translation Worklist and selecting my Worklist
After this I am selecting following
Source Language - English
Target Language - Spanish
Then I am clicking on 'Load for Translation' button. New screen appears. In this screen, Translatable Text table is shown:
It shows following
Number
Source Text <EN>
Target Text <ES>
Status
Object ID
In Status I can see 'Not Translated'. I click on Next for three times as there are three line Number (0, 1 & 2)
The Status does not change. It remains 'Not Translated'.
When I am using following combination
Source Language - Raw Texts
Target Language - Raw Texts.
I click on Next for three times as there are three line Number (0, 1 & 2). The status changes to Translated.
I do not know what is going wrong with my process while selecting Source Language - English & Target Language - Spanish .
I have another question. I have to translate content of entire URL iView. How I can change the whole content of URL iView.
In the source text I can NOT see the contents of URL iView.
Thanks
Stuart

Hi Prakash,
Did you check whether the translation has been done completely in PCD inspector? Some times you would have translated using Portal translation but it will not be written in the locale of the iView property. Then we have to set it manually in the PCD inspector.
Follow the procedure.
1. navigate to System Administration -> Support -> Portal Content Directory -> PCD Inspector
This will open the PCD inspector.
2. "Browse Into" the iview where you have developed it.
3. Click on the "All Props" for the iView which you need to translate.
This will open the Properties in new window
4. Check the property "com.sap.portal.pcm.title" what is maintained in Chinese? if it still displaying in English text against Chinese, Then you need to Edit the property for chinese and have to give the actual chinese word.
Note : I hope you would have selected "Raw Text" for Source language and "Chinese" as Target language. Pls confirm on this.
Thanks,
Mahendran B.

Cursor does not change when hovering over pop-up window link

I created a text link for a pop-up window. The link does work, but the cursor does not change to a pointy finger, the standard link icon.
I don't know a lot of javascript, but can figure it out if it's just adding some code.This was done in CS3. Any help would be appreciated! Here's the code:
function MM_openBrWindow(theURL,winName,features) { //v2.0
window.open(theURL,winName,features);
Thanks in advance.
Todd

A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is not set to anything.
<a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
Set your href to "#" or "javascript:;" - the latter is preferred.

Bugs? playback resolution will not change?

The playback resolution will not change no matter what I choose ? it may be contributing to the distorted playback issues im having ? also when I select a clip from the project or media browser the sequence automatically starts in arri editing mode? I switch to dslr but the playback gets worse.
win 7
64
gtx780

When you refer to playback resolution, do you mean the setting highlighted in this screenshot?
If so, what happens when you try to change the setting? And, of course, if that's not what you were referring to, please elaborate.
And when you say "when I select a clip from the project or media browser the sequence automatically starts in arri editing mode," are you referring to creating a sequence from the clip? If so, the editing mode generally doesn't matter much unless you plan to use "smart encoding" or to enable "Match Sequence Settings" or "Use Preview Files" when you export, neither of which is recommended in most cases. The main properties of the sequence settings that you want to make sure are right are the height, width, pixel aspect ratio, and frame rate.
As to the distorted playback issues, a screenshot might help to start troubleshooting that.
Finally, please specify exactly which version of Premiere you have--the three-part number like 2014.0.1, not simply CC or CS6.

MSS iView Salary Data Not Correct

Hi all,
In the MSS salary data iView, it's showing the salary which is reading from infotype 8. But for some countries, for example Taiwan and Japan, since the salary number is chopped off with the last two digits. For example, the number in infotype 8 is 1234, it will show up as 12 (rounded from 12.34). Does anyone have a idea why this is happening? did we miss any configuration?

Hi Bala,
Thanks for your quick help. Yes, we do realize that it's not portal issue. And we know as a fact that the decimal places defined for Taiwan and Japan are always as "0" in TCURX. But we could not change it here because it will affect all program running based on this table. We do believe that anywhere else in ECC, based on the decimal for each country, the program will handle the conversion seperataly, so it will show the correct data on the UI. But looks like either we are missing configuration in MSS side or this is a bug from SAP. If it's a bug, I was hoping there's a note to fix it and someone here has experienced the same problem and knew the note.

Menubar does not change when switching apps

Sometimes when I switch applications, the menu bar does not change.
The proper menu bar is there, I can use it, but the text shown is some previously focused application.
Switching apps once or twice fixes the issue, but it is very annoying.
This is a fresh re-install of Lion, but I retained my users and applications.
I have tried removing the systemuiserver plist file and rebooting, but the problem persists.
Any ideas?

A link would be nice but I suspect that you are not gettign the finger (you knwo what I mean) when you roll over the link because your href is not set to anything.
<a href="" onclick=MM_openBrWindow('images/image.jpg','largeDisplay','scrollbars=yes,resizable=yes,width=100,height=120')
Set your href to "#" or "javascript:;" - the latter is preferred.

HT5312 I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? th

I DO remember them but Apple chose to put them in Japanese and I can not change the language on Manage my Apple ID so I do not know if I made an error ,it threw me off , it was the wrong question Where did you fly to on your first Aiplane trip ? then I was unable to enter until 8 hours then called Apple Japan 4 times each time threy asked me would you like to speak with an English speaker,I said yes then they told me sorry today is Sunday no English speakers ,but they refused to speak Japanese, then I called 5th time and a kind guy could speak English we were on 1and 1/2 hours he got me to log in but the reset key chain could not be completed still pending.
He said do not mess with that ! then I got a text from somewhere to reset 4 pins suddenly it was very strange I said to him that I got this pin this morning but it said you can use maximum 3 hours it had a UK number and I told him I do not like this and will not enter the code he said do not do it if it is from the UK and then I said to him ok you did a lot to help but we can not go any further ! and we cut of I went back to my computer to re do the ID but I found everything a mess so I call and a stupid sounding Japanese women with a squeaky voice came on I was calm at first and they want your phone number your IMEI number your iPhone serial number date of birth Address email address it takes 10 munutes to check then they ask what are you caling about so I try to explain my keychain is broken or problems with language security questions and can not change my pasword because the security question have failed me so it is ONE BIG HEADACHE AND I START I GET STRESSED she says Do want an ENGLISH speaker ,I say yes ,that guy i talked to earlier but I never got his name and first time I ever talked to him but they said he is not here so I said ok and then she said today is sunday so call back in the morning ,I said ,well ok in Japanese but they make you feel stupid because they do not want to speak Jap@anese with none natives and they are to busy,And they feel that I should not bother them ,then I say that Apple Japan is trying to refuse Apple foreign customers and then she wants to hang up and ask me to visit the shop ,but they are the same I have a very bad time with Apple Japan since they do not discuss software problems or security with customer meaning if you have a problem they ask you to come on a time 20 minutes max so they do hardware test and say you phone is fine then I say no I can not reset my ID they say you must call call centre so I am going around in circles ,When I call English it is usually Australia so if my problem is in Japan surely if do not want me to talk to them in Japanese and they ask me to call Australia but every time my call charge is expensive after asking them is this free because I have Apple care they say yes but when the call goes to Australia 0120 277 535 it might change to paid call so I call then I have to ask is this charging they say we can not give you that information ! so what can I do I have have been at the computer and phone all day on my day off work and in tre week I am so busy and can not use my phone I can not work without it ,this new technology for you ,they can not cope with the fact that the customer have problems yet they do not want to deal with us because they can not solve it and so it shows them to be useless they like to walk around in their cool tee shirts and retro shop but when it comes to functionality we are unwelcome they got the money so do not return because apple is perfect that nothing should go wrong .
But it does somehow my English security answers do not work on a Japanese Question especialy if I did not choose that question I set up the multiple choice In English and wrote the answers in English or Roman and set them langauge preferences in English, do you really think you can correctly write english name or word in Japanese they write a police patrol car pato caa パトカア　they do not have r and l .So it is my choice to make my security easy for me and as difficult for others to hack.But they also have patororoo choo meaning ' now patrolling ' so why they have pato caa patrol car and patoro patrol and have thousands of Chinese words kanji they can find patrol.
I am getting off the topic but I am at a loss to fix this problem when they hold the keys and i have all the info to verify my ID.

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

What causes cellular data usage to decrease if last reset has not changed? I reset every pay period cuz I do not have unlimited and was showing 125 mb sent/1.2g received. Now showing 98mb sent/980mb received. Last reset still shows same

I reset my cellular data usage every month at the beginning of my billing period so that I can keep track of how much data I am using thru out the month. I do not have the unlimited data plan and have gone over a few times. It's usually the last couple days of my billing cycle and I am charged $10 for an extra gig which I barely use 10% of before my usage is restarted for new billing cycle. FYI, they do not carry the remainder of the unused gig that you purchase for $10 which I disagree with. But have accepted. Lol Moving on.
I have two questions. One possibly being answered by the other. 1. Is cellular data used when I sync to iTunes on my home computer to load songs onto my iPhone from my iTunes library(songs that already exist)? 2. What causes the cellular data usage readings in iPhone settings/general/usage/cellular usage to decrease if my last reset has not changed? It is close to end of my billing cycle and I have been keeping close eye. Earlier today it read around 180mb sent/1.2gb received. Now it reads 90mb sent/980 mb recieved. My last reset date reads the same as before. I don't know if my sync and music management had anything to do with the decrease but i didn't notice the decrease until after I had connected to iTunes and loaded music. I should also mention that a 700mb app automatically loaded itself to my phone during the sync process. Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage? Guess turned out to be more than two questions but all related. Thanks in advance for any help you can offer me. It is information I find valuable. Sorry for the book long question.

Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage?
1) No.
2) It does provide an estimated usage, but it's not accurate. For accurate determination, you should check the remaining/used MBs from the carrier (most of the carriers provide this service for free).

TS1814 Most of the songs on my iPod Classic no longer dshow up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Th

Most of the songs on my iPod Classic no longer show up on iTunes on my laptop. I deleted iTunes & installed the latest version but this did not change anything. For example on 1 playlist I have 66 songs but only 1 shows on the iTunes screen. Thanks you for any help.

See Empty/corrupt iTunes library after upgrade/crash or
Recover your iTunes library from your iPod or iOS device.
tt2

Iview height is not changing

Similar Messages

Maybe you are looking for