IView issue in anonymous mode

Dear all,
we are using EP 7 with the possibility to change into different portal languages.
If I try to open an iView in anonymous mode and portal language English, no content is displayed. After that I change the portal language to German for example, the content of the same iView is displayed correctly. Afterwards I switch back to English then content is also displayed correctly. So the first time when I try to open the iView in English no content is diplayed.
In personalized mode everything works correctly.
Does anyone has a solution for me?
Thanks in advance.
Regards,
Sven

Sven,
you have to change the settings in VA
http://help.sap.com/saphelp_nw70/helpdata/EN/cd/1aad4abcb98c4597f9e395a6b62f43/frameset.htm
Procedure documentation Configuring Anonymous Logon with Named Anonymous Users
Thanks
Bala Duvvuri

Similar Messages

  • In Portal Anonymous mode - Change password option not coming- login fails

    Hi Experts,
         We are having some application which requires login in anonymous mode. When we click the application and give the user id password, it loggs in properly, there is no problem in that.
        But if the password is reset by administrator, then when entering the reset password given by admin it should ask to change the password. This is happening in normal scenario(/irj/portal), but when try the same in anonymous mode(irj/portal/anonymous) where the prompt is from the login required application, then it says login failed instead of giving the change password and confirm password screen.
    Appreciate your help in solving this issue. I hope many would have faced similar situation.
    Thanks
    Yusuf

    Hi Yusuf.
    Do you use a standard or custom login module for your application?
    More likely the used login module does not have a logic that handles such scenario as a change of user's password.
    In this case you need to implement a custom module with a required functionality.
    Best regards,
    Aliaksandr Zhukau

  • Issue in Develop mode for embedding google map

    Hello,
    I am facing an interesting issue in Develop mode for embedding google map html code (screenshot is attached)
    The map rectangle showing almost same size box underneath filled in black, while in preview mode, it is working properly. I could not find the reason, where I am doing something wrong.
    Many thanks .

    Hi Muzeone,
    Its a default behavior with every WYSIWYG HTML Designer or editor,
    Reason :The black box which is appearing in the design view is because you might have tried increasing the size of the iframe thumbnail.
    If you are using Iframe and using Insert HTML feature in MUSE, make sure when you paste the iframe code in MUSE, it creates a thumbnail in design view do not resize it in design view.
    Size does not change the height and width of Iframe in MUSE as its being controlled by the codes that you are inserting.
    The design view will only show you iframe height which is defined in the codes below that it will show a black box.
    Enjoy working with MUSE !!
    Thanks
    Prabhakar Kumar

  • Issues Exiting Sleep Mode and Odd Behavior On Restart with GPU

    I'm running a completely stock HP P7-1240 desktop except for an EVGA GeForce GTX 750 TI SC GPU. The GPU runs fine when the computer is up and running (which is odd because the forums have several other threads mentioning that the 700 series should be incompatible with my BIOS).
    However, there are two main strange problems that have arisen since installing the GPU. One is that, whenever the computer enters sleep mode, it refuses to wake back up properly. It seems to me that the computer activates but does not send any signals out from the back panel (at the very least, no video signal because my monitors stay blank). On a rare occasion, it will wake back up properly, but at least 90% of the time, it needs to be restarted. Upon restart, sometimes the same issue occurs (no video output), and the computer needs to be restarted a second time before it will boot up again.
    This leads to the second problem. When starting, the computer goes to a black screen listing basic computer specs (see attached photo. At this screen, the computer does not respond to any input.  It proceeds to beep 3 times, all the same length and pitch spaced about 30 seconds apart. After the third beep, the screen goes black and then the computer boots up normally with no further odd behavior.
    Without the GPU, none of these issues happen. At the very least, not regularly.
    I have seen another thread mentioning that, although the HP support page for my desktop does not list it, there is a BIOS update for my motherboard that has fixed issues relating to more modern GPU's. By nature of it being a BIOS update that does not (appear to) officially support Windows 7, I'm hesitant to move forward with that potential solution.
    Although I'm planning to build myself a new computer from scratch at some point, I was hoping to at least get another year out of this machine, if not 2.  While this issue doesn't appear to be immediately threatening the stability of the computer, I can't help but think that this is an issue I should iron soon to avoid future issues (not to mention it would save me a fair amount of electricity to be able to enter sleep mode on a regular basis).
    Any suggestions would be greatly appreciated!
    This question was solved.
    View Solution.

    Hello @johnmwalker,
    I understand that you are having some issues with your HP Pavilion p7-1240 Desktop PC waking up from sleep mode. I am not sure how much can be done for the delay on your startup with an OEM BIOS you are limited in what you can do and since your graphic card works I think you would be better off not messing too much with the BIOS at this point. The one thing I would try is going into the BIOS using the HP Support document:BIOS Setup Utility Information and Menu Options, and under Advanced > Power-On Options set POST Messages to Disable and POST Delay (in seconds) to None.
    Now the waking from sleep mode issue  could just be the hybrid sleep setting causing you an issue with sleep mode. Use the following steps to disable hybrid sleep:
    Step 1. Click Start
    Step 2. Click Control Panel.
    Step 3. Click System and Security
    Step 4. Click Power Options
    Step 5. Click High Performance from Power Options
    Step 6. Click Change plan settings
    Step 7. Select Change advanced power settings
    Step 8. Click the plus (+) sign next to Sleep
    Step 9. Click the plus (+) sign next to Allow hybrid sleep
    Step 10. Select Off from the drop-down menu
    Step 11. Click OK
    Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this?

    We recently switched ISPs. To connect to the new ISP our Airport Extreme has to be in bridge mode. Now our Nintendo Wii won't connect to the Airport. Is it an issue with bridge mode that is causing this? We're running two Macs wirelessly with no problems.  And the Wii did connect before the switch.

    Hello and thanks for the reply.  I gave this a try, turned off Airport on one of the computers and tried the Wii again.  Still no connection.  I should say that we're also running an old G4 (wired) off the Airport as well, with no problems.  I've tried many things to make the Wii to work, including power cycling the Airport, turning off the security settings in the Airport, resetting the Airport to it's default and redoing the network, resetting the network setting on the Wii (several times), moved the Airport closer to the Wii, all with no luck.  The Wii "sees" the Airport but won't connect to it.  I'm at a loss for anything else to try, so any help is appreciated.

  • Issue with Anonymous Authentication and updating or starting new projects

    So 2 weeks ago I had a post about Anonymous Authentication found here:
    https://social.technet.microsoft.com/Forums/office/en-US/9b0e6eec-190a-4b48-a280-6adef441659a/issue-with-anonymous-authentication-and-people-picker-and-reports?forum=sharepointgeneral&prof=required
    That issue has been resolved but has created a new issue. We have Anonymous Authentication disabled but when one of our users tries to make a new project she gets the following:
    Unexpected response from server. The status code of response is '0'. The status text of response is ''.
    When she tries to edit an existing project, she gets the following:
    The server was unable to save the form at this time. Please try again.
    If I re-enable the Anonymous Auth. everything works for her again, but then we face the issue from the original post with reports not publishing.
    Any ideas on how to make everything get along?

    #apDiv2 {
        position: absolute;
        width: 698px;
        height: 299px;
        z-index: 1;
        left:50px;
        top: 117px;
        overflow: scroll;
    Don't forget to fix your code errors.  You're still missing a <body> tag in your markup. 
    Nancy O.

  • Yoga 2 Pro - Frequent issues after Tablet Mode and Suspend in Windows 8.1

    Hi,
    I bought a Yoga 2 Pro running windows 8.1 in December 2013. The machine runs fine, but from the beginning I experience frequent system issues whenever I have the Yoga in Tablet mode (display turned to the back).
    The issues sometimes arise directly after I resume from tablet mode. More frequent the issues appear once I had the machine in tablet mode and after had it in suspend mode!
    Some of the frequent issues that arise after I resume from tablet mode:
    Power surge at right USB Port, where I have my mouse connected! The connected device cannot be provided with enough power. (Note, the left port still works), or
    WiFi not working any more (No WLAN device detected, WLAN not functional), or
    Bluetooth not working (No Bluetooth device detected, BT not functional)
    All issues reliably disappear with a system restart!
    I have already updated my drivers, scanned the Lenovo and Microsoft forum whether this is known without success and hope this avenue will bring me more luck.
    What makes the bug hard to narrow down is that I do not have a recipe to reproduce the error. Not every time I turn the display in tablet mode the symptoms are equal! But what I can is that the tablet mode is the most common denominator I found so far.
    Any helped/suggestions much appreciated.
    Regards
       Florian

    Yea, great... it seems like these articles and suggestions come up in the forum, and then there is always someone that says "it didn't work but this solved it for me" which ammounts to setting the screen at full brightness all the time.   LENOVO, HOW ABOUT FIXING THE ISSUE!!!  It definitly has something to do with power, in my case _the only_ thing that fixes it is either plugging in a power cord or closing the screen, reopening it and hitthing the power button to turn it back on (both are REALLY annoying if you're trying to get work done).  
    I'm a fairly experienced IT guy, and I used to swear by _IBM_ Thinkpads and related laptops, then when they went to Lenovo a few years ago it seems like the support has gone to hell and the hardware appears nice but is sketchy (this thing should have never shipped with this display problem or the wifi card issues that it shipped with).   Honestly if issues like this don't get resolved Im not likely to order any more, ever.  Not for my self or for my organization, we will stop persueing contracts with you and certifying the hardware for our work (though with the lenovo purchase it was deemed that the hardware wasn't certifyable for certine applications anyway).  Yes, that will cost you a few thousand sales a year, which is  a drop in the bucket for you, but I'm sure I won't be the only one.

  • USB 2.0 issue with sleep mode--help!

    hey there,
    so i've searched this forum's board and found that it seems quite a few people have had issues with USB 2.0 and sleep mode on the mac. most of what i read, however, comes from people not being able to put the computer to sleep once new USB 2.0 cards or devices are installed. that is not the problemm I seem to be having, but is this:
    I recently purchased a Belkin USB 2.0 PCI card, and installed it on my MAC G4 tower. It seemed to work ok for a little while, but then i noticed that AFTER i put the computer to sleep, when it 'awakens' from slumber, it no longer reads the USB devices. if the device was plugged in prior to sleep mode, it sometimes reads ok. but if I try and plug in a new USB device, such as an iPod or flash drive, no dice. it doesn't mount on the Mac.
    I called Belkin tech support, and they were very helpful, but told me that the macs have had issues powering the USB PCI card once the computer is in sleep mode. they even directed me to an apple support page that has downloads that seem to address this, but they're for 10.0-10.0.4. I don't want to download that onto my mac (10.3.9) cuz im worried it might screw something up on my OS.
    I would LOVE a download link for a software updater for this if someone knows where it is, otherwise, I may have to return this thing to Belkin and go with a more mac-friendly brand. so im open to that possibility, too.
    any help would be GREATLY appreciated!!
    cheers,
    the quid pro
    Power Mac G4   Mac OS X (10.3.9)   Dual 1Ghz, 1.5 GB SDRAM

    I would either complain to Belkin for a fix if there is one or return the card and try a different one. You should not have the problem, but Belkin USB hubs and cards appear to have more problems like yours than other manufacturers' products.
    You might try Sonnet's Tango FW400/USB 2.0 multi-card, for example, or Firewire Direct's 6-port FW800/USB 2.0 card.
    You may also want to check this page for some user reports on related products.

  • Ios 7.0.4 battery issue and DFU mode restore

    Hi guys. My iphone has an issue with its battery since i updated my iphone from ios 6.0.2 to 7.0.1 until now ios 7.0.4. I have tried many things, like turn off parallax, background app refresh, location service, mail to fetch, air drop, bluetooth, celular data, delete icloud back up from iphone, delete email acount, reset all setting, restore from back up, restore and set it as new phone, but all thoose things didn't help. Now I loose 1% for 3 minutes. Before thoose update i loose 1% about 6 minutes.
    But i have been oberseving so far to know what is causing this issue. This morning i did the DFU mode restore, exatcly not recovery mode restore. After DFU restore completed, i watched every each percent of my battery begun increases to 4,30 minutes while using internet via safari. After that i restored again from my itunes backup, and the battery back to 1 % / 3 minutes while using safari with the same setting. This is first time my battery increases, and my first time i used the dfu mode restore. So far i always using itunes restore.
    I guess there are something make the battery drained. I think that icloud data and email account causes this issue. But when i try delete manually my two email accounts and icloud data backup. My battery still 1% / 3 minutes.
    So, are you guys have some experiences? Any ideas?
    Thanks before, regards from Indonesia

    I'am sorry. I'am using ios 7.0.4 now. I forget to set it before i send that post

  • SSRS 2012 rendering issue/Enabling Anonymous access - Upgraded SSRS from SQL 2005 to SQL 2012.

    Hi,
    I just recently upgraded SQL 2005 SSRS to SQL 2012 SSRS. Everything is working great other than small issue.
    Sounds like some authentication issue. SQL 2005 SSRS - IIS, we enabled anonymous access and we never had this problem. SQL 2012 SSRS /WIN 2008 R2 -  I am not sure how to enable anonymous access.
    If anyone can help me on this? I really appreciate your help.
    Thanks,
    Vel
    Vel Thavasi

    Hi Vel,
    According your description, you want to know how the enable anonymous access to SSRS 2012. Right?
    In SSRS 2008 or later version, we are not using IIS any more. If we want to configure the authentication, we need to configure in RSReportServer.config. This file locate at:
    <drive>:\Program Files\Microsoft SQL Server\MSRS12.MSSQLSERVER\Reporting Services\ReportServer
    However, in SSRS 2012, Anonymous authentication is not supported on report server. Please see:
    Authentication with the Report Server
    In this scenario, we need to custom an authentication type to achieve the "Anonymous" goal. Please refer to the link:
    Configure Custom or Forms Authentication on the Report Server
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • Q 10 Issue with Night mode and Pnone on ring mode

    I have one more issue now.
    I put on the alarm mode at night which shows the clock in red.
    Today I realised that the phone goes in to silent mode and does not ring.
    I want it to be in PHONE ONLY mode to attend to emergencies.
    Is there any way that can be done ??
    I wish to seee the time at night and also receive the calls as it was possible in BB 9900.
    Thanks and Regards
    Solved!
    Go to Solution.

    In the clock app, swipe down from the top bezel to go into settings - the setting you want is there.

  • ABAP webdynpro iView issue with Internet explorer

    Greetings,
    We are trying to integrate ABAP webdynpro with portal using the standard SAP webdynpro iView template, we are able to successfully integrate and display on portal pages.
    However if we are using IE version 7.0 browser we do not have any issues, but when we try to use IE version 6.0 the webdynpro portal pages does not display any content. A workaround was to open up the IE settings and change the setting for Navigate sub-frames across different domains to 'enable' from 'disable'.
    This fixed the issue.
    Also we came across information that we can change the setting to force the portal to use the css from the ABAP backend by changing the iView property 'Supply portal stylesheet' from 'Yes' to 'No'. Does this affect the portal behavior in rendering content in MS IE.
    Please let us know if there are any other methods to overcome this issue, as this will affect many of our users.
    iview isolation is of type 'URL'
    page isolation is set to 'Embedded'
    Portal page used is default framework type not webdynpro type
    thanks,
    Sudhir

    Greetings,
    This issue was fixed.
    I found this blog helpfull
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/wdabap/general%2btechnical%2baspects
    thanks,
    Sudhir
    Edited by: Sudhir Sidd on Jul 23, 2008 5:42 AM

  • Transaction iView issue: Table Can't Support multi-cell copy pase

    Hey guys:
                  I have a big problem. The transaction iview's content is a ABAP application, and it cannot support mulit-cell copy-pase when user try to pase their data from Excel. It only allow single cell copy-pase each time, and that means user needs to  enter data cell by cell. However, the ABAP application works just fine on SAP GUI.
    Anyone can help me figure this out?
    I hope this is configuration problem but WebGUI doesn't support this operation.
    Looking forward your help! Please leave your suggestion. Thanks!

    Sorry it has taken so long for people to respond but this is a lot of data and it took time but basically it's a software issue what's happening is your service provider is making every attempt to contact your phone and your phone is basically not giving up any of the data like your udid or unique identifier. Their is no exact fix for this because I have only ever seen this issue 3 times and what it is best to do is connect to your computer and restore and set it up as a new phone then restore from backed up data. This is the only advice I can offer as this issue is so rare no one has one exact answer for it

  • BW Report iView issue in EP 6.0 SP16

    I am try to preview a BW iView via the Portal:
    The iView gets generated but the screen displays only the icons and tabs but no report is getting generated. I expect a variable screen but instead of that i am able to see BEX formatted screen.
    the same query i am running on EP6.0 SP 13 and BW3.5 SP13 is working fine.
    This BW iView I am trying to generate on an EP6.0 SP16  with BW 3.5 SP16.
    I am unable to solve this issue, so kindly let me know if anybody has the solution
    Regards,
    Ricky Shah

    Hey Ricky.
    We have run into the same problem you are experiencing after patching BW 350 to SP16.  We were previously at 13 as well.
    You have probably already figured out what we just did, but I thought I'd update your message until SAP comes out with the "real" fix.
    We are able to get all of our BW report iview content working, but only by re-creating the iviews as URL iviews.  Depending on the number of BW Report iviews you have this could be a ton of work, but if you've got upper management looking only at a few, this will get them up and working again.  Take the URL and just paste it into a standard URL iview and see if that works for you.  It did for us.  It's also interesting to note that in the properties of the standard URL iview, it parses out the parameters with several "GET" statements.
    We have not had any success changing the properties of non-working BW Report iview.  This is what I believe SAP will have to fix.  The problem seems to be with the passing of the URL parameters.  Hopefully a fix will be released soon so that every BW Report iview doesn't have to be rebuilt.
    Hope this helps.
    Mike Elpers

  • CS3 mediacore issue. (Editing modes/plugins)

    Hi, I've been having an unresolved issue the past couple days. I can't seem to figure out what's wrong. I looked up my problem on different boards but I haven't found one similar to mine.
    So I own a macbook pro, running on a Mac OS X version 10.6.3, and I have Adobe After Effects CS3. So far, my main issue is with the "mediacore" plugins at the start-up. Sometimes it crashes and sometimes it says "failed to initialize mediacore." I tried checking this problem out by looking inside what's in the Mediacore folder. So I viewed my plug-ins folder and then went inside the Mediacore. In the folder, I found a subfolder called "Editing Modes" and it contains an "Adobe Editing Modes.xml" and under the subfolder, is a list of the next following:
    - CompilerQuickTime.bundle
    - ImporterAiff.bundle
    - ImporterFastMPEG.bundle
    - ImporterFlash.bundle
    - ImporterMP3.bundle
    - ImporterMPEG.bundle
    - ImporterQT.bundle
    - ImporterWave.bundle
    - PlayerMac.bundle
    I tried to delete only "Editing Modes" folder and leave the bundle files in place. Afterward, After FX started up properly without crashing. It just gave me an error saying "failed to initialize mediacore" and then the program worked. The only problem with this is, I wasn't able to import any movies or mp3's. They're all grayed out. I wasn't able to drag and drop videos or sounds either. They just didn't work.
    So, I undeleted "Editing Modes" and I deleted the bundles. The same thing happened. THE ONLY difference is, when I leave Editing Modes and the bundle files in the folder together, the whole program crashes at start up. So the program works only with one or the other deleted.
    Ugh, I don't know what the problem is exactly! I also have QuickTime Pro 7 installed and I have QuickTime X.
    Does anyone have a solution??
    Also I'm able to export PNG's (seems to be the only workable files) out as quicktime movies, but I can't import. Importing is my only problem.

    Something is severely busted. I'm afraid you will have to reinstall the app and also have to reinstall Quicktime. Also of course do the usual and run a Repair permissions to fix any potential file access issues, trash the AE prefs and clean out the media cache manually. Location of folders here.
    Mylenium

Maybe you are looking for