Iview not opening in a separate Window

Hello Experts,
We have an Iview for approving/rejecting apprasials for Manager. The Iview Id is PddDirect. In order to open this iview in a separate window we have set "Launch in New Window" property to "Display in separate window".  This Iview is assigned to a page and that page to a workset then this finally this workset is assigned to a MSS Role. This Iview opens in a separate window when accessed through MSS Role.
Once any employee submits his appraisal Manager gets a link in email to access this appraisal document to approve/reject.
[http://host:port/irj/portal/?NavigationTarget=ROLES://portal_content/com.ABC.ABCContent/com.ABC.HRSE1/com.ABC.iViews/com.ABC.PddDirect&DynamicParameter=ID=014D1089964C1400E2E10080000A104E240000X]
When manager clicks on the link to access document it opens in the Content Area of portal even though the property is set to separate window.
When the same thing is done by loging into  ESS/MSS portal the same Iview opens in a separate window.
Could anyone put some light on the wierd behaviour of this particular Iview.
Thanks
Surender Dahiya

Hi Surendra
As you are telling when manager clicks on the link to access document it opens.
Can you  try with changing the property of ["Launch in New Window"  "Display in separate window"] of the Source iView i.e where the link is available also you can change target.
If  iViews are  assigned to pages change the corresponding page properties also. Make sure clear cache of the Iview and Clear history of browser and test the same.
BR
SS

Similar Messages

  • Simple but Urgent -- Iview when opened in a separate window

    Hi,
    I made iview's property :
       Launch in a New window :  Display in a separate window .
    So when the user logged in and  clicked on that  iview , It is opening in a separate window --
    But width around 30% (that is not full width ), height ok .
    So , Can any one tell me so that the iview must be opened in a separate window with 100% height and 100%width .
    Regards,
    Srini

    Hi Srinivasrao,
    As you said you are launching in  a new window. so in property editor of that iview just check with the properties Height,Width of external window and you can change the height type of the iview to full page insteat of fixed .and check the parameter of the window features . I hope this'll solve your problem.
    regards,
    sita

  • Mainmenu.xib will not open in a separate window?

    I'm new to developing, and bought the book "Beginning Mac Programming: Develop with Objective-C and Cocoa". I'm only a few pages in, and I've run into a problem. I am running on Snow Leopard and Xcode 3, and when I double-click on "Mainmenu.xib", nothing appears.
    Any suggestions?

    I have the same problem. I'm following the instructions in order to create a HelloWorld routine.
    "Using Interface Builder
    Interface Builder is Apple’s graphical editor that you use to design user interfaces. It doesn’t generate source code; instead it allows you to manipulate objects directly and then save those objects in an archive called a nib file. At runtime, when a nib file is loaded the objects are unarchived and restored to the state they were in when you saved the file.
    You need to add an instance of the HelloView class that you just created in Xcode to the application window.
    Open Interface Builder by double-clicking the MainMenu.xib file, which you can find in the detail view for the project group.
    Note: A nib file can have a .xib extension or a .nib extension. To find out more about the differences between these, see Interface Builder User Guide."
    But when I diuble-click the MainMenu.xib file, it doesn't make anything. What could be the problem?

  • How set up multiple homepages to open in a separate window (not a tab) when desired...

    I would like to setup and be able to click on a Firefox profile (I assume profile) or pass parameters to the firefox.exe and have firefox open about 6 separate windows (not tabs) set to different home pages.
    If I use the Pipe Symbol in Options, it will open separate tabs but also ause the probelm below which I also would like to solve.
    A lot of times I also want to run another instance of firefox by clicking on the Firefox icon in my quick launch tray and DO NOT want it to open up all of these sites again.
    How is this best achieved?
    In the past I just opened up each site individually in its own window.
    Thanks very much
    Peter

    You can create multiple shortcuts on the desktop and include the URL to the command line and use the -new-window switch to specify a new window.<br />
    You need to use the -new-window switch for each URL (-new-window URL1 -new-window URL2).<br />
    If the command line gets to long then you need to use a CMD file to store the full command line (start "" firefox.exe -new-window etc.).
    *https://developer.mozilla.org/en/Command_Line_Options

  • Links created in Word, now in the pdf they won't open in a separate window

    I created links in my Word documents, then converted this file to a pdf. Now when I open the pdf and click on a link it open in the same window and I am unable to get back to my original document. Is there a setting somewhere to make the links open in a separate window?

    Pat, thanks for your reply. I finally had some time to look further into this problem and still trying to figure out. First to answer your questions:
    what is your operating system & version? Windows 7 Professional
    on what browser(s) does that happen? Google Chrome, Firefox, IE
    does it happen for any PDF link, e.g. this? Yes, any link with a pdf extension
    does it still hapen with the latest Reader version 10.1.4? Yes, just downloaded it last week and still the same.
    Another thing I noticed is afer unsuccessfully trying to access the pdf link, the resulting blank page reads "Could not load Adobe Acrobat" (could not load plug-in).
    I do have Adobe Creative Suite 3 installed, which of course provides for Adobe Acrobat; I'm not sure if there is a conflict there, but I might uninstall everything and then just try with Adobe Reader to see from there.
    I hope some of this helps. I appreciate your efforts in trying to assist.
    Cheers,
    Vinnie.

  • Open in a separate window

    I use Adobe Prof. to make my PDF
    I want my pdf to open in a separate window on my website.
    I found I should follow these steps-below- however it doesn't seem to work
    Edit> preferences> general> internet> uncheck display pdf in brower.
    When I go to open is show url doesn't exist.
    Please advise.
    Thanks in advance.

    Sandy,
    This is not something controlled by Acrobat. If you are posting the pdf
    through html, then you need to write code the will open a new window.
    Mike

  • When I click on firefox in taskbar, it does not open in a new window and shows previews.

    I have firefox 14 and windows 7. firefox is pinned to taskbar. When I click on the firefox icon in taskbar, I want it to open in a separate window and not show preview.

    Yes. Thank you. Tutorial solves half the problem. The firefox icon no longer shows previews but I am still unable to open a new window by clicking on it. I would like the icon to open a separate window every time I click on it. Instead, it opens only 1 window. Please help. Thank you.

  • Force iView to open in a new window when using NavigationTarget

    Scenario - Portal Version 6.0 - NW2004  SP16 - WAS 6.40
    A Custom iView is used to gain access to an application running outside of the portal.  The user's credentails to the target application are recorded in the portal's UME via user mapping.  
    I want a user to be able to click a hyperlink to this iView that has been embedded in an email, and have the user gain access to the target application by 'going via the portal'.  The url that I use is of the form:
    http //<my_portal_server>/irj/portal?NavigationTarget=navurl://49a8add355f836061e6279f389cdc72e&open=/page&id=100&proc=10067&flag=1
    This is working, the user is first taken to the portal's login page, and upon successful login to the SAP portal, user is then directed to the target iView, and is logged in automatically to the target application, and able to use the target application.
    >BUT EVEN though the iveiw is configured to open in a new window it does not. It always opens in the main content area, and it always opens in this area in a height of about 40 pixels.  The iView properties are set to FULLPAGE.
    >If I invoke this iView using the portal's standard built in navigation, it does open in a new window
    >It just won't open in a new window when using direct URL to the iView WHY?
    How can I get the target iView to open in a new window under all circumstances?
    Do I need to pass more information in the URL?
    Are there a standard list of URL parameters somewhere that influence the behaviour of the NavigationTarget?  I have seen reference to 'context', 'mode' etc but can't find a list of valid parameters?

    Hello justaquestion1112,
    Thank you for your post.
    You should know that these forums are specific to the
    Acrobat.com website and its set of hosted services, and do
    not cover the Acrobat family of desktop products.
    Please visit the following Acrobat forums for any questions
    related to the Acrobat family of desktop products:
    http://www.adobeforums.com/cgi-bin/webx/.3bbeda8b/
    Cheers,
    Pete

  • I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

    I am trying to open PDF files from safari, but when I click on them they open in a separate window and the information is encrypted. Any ideas on how to get them to open them in Adobe? Any help please!

    The pdf is loading as html code. If you save it, it will download as :
    605124.pdf.html
    Change the extension to .pdf
    And it opens and works perfectly, I just tested it:
    Use this link to download it automatically:
    http://saladeaula.estacio.br/arquivo.asp?dir=00/1020624/605124.pdf&num_seq=59828 4

  • Clicking the scroll wheel does not open a new firefox window

    I'm running Windows 7 x64 SP1. I use the scroll wheel to click items in the task bar to open another instance of those items. Eg I scroll-click a Firefox or Excel or Explorer or whatever item in the taskbar, and it opens another instance of that program. I use this feature to open a new instance of FireFox rather than switching to the FF window, then using control-n to open a new window.
    I just upgraded to FireFox 6 from FF4.x. Since doing so, scroll-clicking the FF item in the taskbar does not open a new FF window. It does, well, nothing.
    I installed FF6 on a clean Win7 x86 (RTM) build in a VM. When I use the scroll-click feature in the taskbar, it works as expected: it opens a new FF window.
    Things I have tried: A different mouse; updating video drivers (I doubted this would make a difference, but it needed to be done anyway, so I thought I'd mention it); running FF in safe mode (ie with all plugins etc disabled).
    I'm doing a little experimentation right now with respect to x86/x64, RTM/SP1, clean FF6/upgrade from 4.x and other differences that might highlight why it works as expected in my VM but not on my physical machine.
    I'm curious to know if anyone else has experienced this problem since upgrading to FF6.
    Max

    Respectfully, that answer isn't particularly helpful. I have already demonstrated that middle-clicking (mouse wheel click) will open a new instance of FF, and other programs. This was true before the upgrade from FF4 to FF6, and is true on all my VM builds (Windows 7 default install with nothing but FF installed).
    Nevertheless, I've tried shift-left-click, and it does not open a new instance. It will only open a new instance if I pin FF to the taskbar, which I have already stated I do not want to do. This new behaviour is unique to FF. Other applications (Word, Excel, Internet Explorer, whatever) all behave as expected. It is only Firefox that is misbehaving, and it is only misbehaving since the upgrade.
    My issue is that FF has changed its behaviour with respect to middle-clicking since upgrading from 4 to 6. I'd welcome helpful comments about getting FF to behave.
    Max

  • Firefox will not open more than one window and upon restarting will not open the previous tab and refuses to open bookmarks

    Firefox does not open more than one window. I can open plenty of tabs, but not more than one window. Upon closing firefox and trying to restart the browser will not open and needs to be closed through windows task manager. Upon trying to re-open Firefox I receive the 'oops this is embarassing , firefox cannot re-open your tabs" message. When I click on "new session" the bookmarks do not load. It is becoming very frustrating as I am a student and often do lots of research on the web while using lots of open windows.

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    * [[Troubleshooting plugins]]
    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    * Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
    See also "Hang at exit":
    * http://kb.mozillazine.org/Firefox_hangs
    * [[Firefox hangs]]

  • Unable to upload files using firefox, be it dropbox, gmail or any other websites where we need to attach files. It does not open up a new window to choose file.

    all of a sudden im unable to attach files in any of the websites. Im using firefox version 30 and when I click to attach file it does not open up a new window where we can choose the file from my computer. It happens almost in all websites that I use (gmail, dropbox, other websites).
    This was not the case before, seem some problem with firefox.. can somebody fix this at the earliest. thanks

    hello Balaatmozilla,
    please check if this problem appears as well when you try to download a file, does this happen again when you try to download a file?
    if so there must be a problem with your HDD controler, to solve this issue follow th steps:
    1.Right Click on My Computer, Select Properties
    2.Click on Device Manager in Top Left corner
    3.expand the IDA/ATI/ATAPI controllers
    4.right click on the one which is related to your HDD
    5.click on Uninstall
    6.Restart
    when you restart your windows the OS will try to install the drivers again, if this happens then restart again and check if the problem is solved, if no try to install the HDD drivers and related drivers manually and then restart your machine

  • Why can I not open itunes app running Windows XP professional sp3? I get a message DEP Data Execpetion Program which doesn't allow me to load itunes to down load or purchase music...please help?

    Why can I not open itunes app running Windows XP Professional w/SP3? I get a window message DEP that will not allow me to open the itunes app to load or buy music

    You're welcome! Glad you got things sorted out.

  • Adobe reader 10.1.2 could not open the file '/C/WINDOWS'

    since adobe reader 10.1.2 urls don't work in pdf files to folders.
    C:\WINDOWS\xy.xls  
    ok
    C:\WINDOWS
    not ok > adobe reader 10.1.2 could not open the file '/C/WINDOWS'
    C:\WINDOWS
    ok > with deactivated protected mode
    no problems with 9.5.0 or 10.1.1 with activated protected mode 
    is that known? any other workaround?
    thanks

    Hi,
         I also have Reader 10.1.2 installed on my machine and I also cannot open a link in the PDF, that will eventually call an exe file. I don't think that there would be different behaviour on your machine. So, I think, now this is the expected behaviour Reader 10.1.2 onwards.

  • Can not open new blank tab window from file, new tab.In Tools/Options/Tabs ticked open new windo w in new tab?

    Can not open new blank tab window from file, new tab.In Tools/Options/Tabs I have ticked open new window in new tab?

    The Ask Toolbar is probably causing that in the Firefox 3.6.13 version. Disable that extension or un-install it.

Maybe you are looking for