Iview object properties after role uploading from ABAP again

Hi,
Now it seems that the properties of the iviews that were uploaded from ABAP stack are overwrittened when this role is uploaded again from ABAP stacks.
I wuold like to set the property of the iView as "start with another window". but they are now overwritten after role uploading.
if someone know good idea, please advise.
Kind regards,
Masaaki

Hi Tilak,
I think you query is not be not answered.
When you upload the role (click on start upload )you need to wait until the status is Finished.The role that you have uploaded can be seen in portal content - content Administration-> portal content-> migrated content-> roles-> u201Csystem nameu201D .
If you are not able to see mean your role is not uploaded correctly.
And my suggestion is first check the service com.sap.portal.pcd.rolemigration"
Hope this resolves your problem.
Cheers!!
VEnk@

Similar Messages

How to Change Default Iview Properties for Role Upload?

Hello,
We have many roles to upload from R/3 ABAp system to NW2004s EP.
We use the Role Upload tool in the Portal to achieve this.
It works fine, the roles are created in the portal and can be assigned to users.
The fall back is that we have to modify every single transaction iview in the portal after the upload to modify the SAP GuiType from "SAP GUI for HTML" to "SAP GUI For Windows".
How can we change the default model used of SAP GuiType for uploading transaction iviews in uploaded roles?
Also, the uploaded role is not flaged as an "Entry Point", is there a way to set this marker to "Yes" as a default value for all uploaded roles?
Best regards.

This is one of Acrobat's less intuitive areas!
For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
Steve.

Problem after role upload?

Hi All,
I used role upload tool and uploaded them to my portal. I uploaded only role to user assignements (I dont want to upload transactions etc..). I just wanted to get role to user assignments from ABAP system.
I got them under Migrated Content -> SAP Component systems. I checked if the users and roles are assigned properly. IT was correct.
Now, I wanted to add few iviews for my role that is uploaded. so i created a delta link into my working folder and added few iviews,worksets and set the entry points. and when i logged in as user, I cant see my workset in TLN.
I just wanted to know, doesnt the delta link of roles copies the user assignments of source role to the target role. should i do it manually again to assign the user to that delta link role.
Please help me in this regard.
Thank you

any help is appreciated ??

Role upload from portal.

hi,
I am attempting to upload a sampling of R/3 ECC 6.0 roles into the portal (EP7.0). I have the system connection defined and testing successfully. I unfortunately can not execute the upload function. After defining the selections that I wish to upload, in this case a role, I receive the red exclamation mark followed by
"Could not perform action. Check the role migration log for additional information"
Please let me know how to upload sap roles from portal.
thanks in advance.
Mahee.
Edited by: MaheeshReddY on Nov 6, 2010 12:10 PM

Hi,
Make sure Portal System Landscape has correct valud in System Property tab (System Property,Connector).
Below SAP help gives you all the informaton on role upload (Pre-requisites/the process flow).
http://help.sap.com/saphelp_nw70/helpdata/en/43/0caa807dad6e72e10000000a422035/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/76/405640a2f78437e10000000a155106/frameset.htm
Regards
Nagaraju

BI Role upload from BI-JAVA/Portal creates wrong url in Iview property

Hi Everyobody
here is a tricky one. Our BI DEV is a Systemcopy from the PRD.
When we try to upload Roles from the BI-JAVA/Portal it generates the Iviews Worksets correctly.
The only Problem is that the Iviews property "URL Template" is the one from the Production.
On our DEV System:
I checked the bsp from icf with the correct url
I checked the HTTP URLLOC entry
I checked the RSPOR_T_SETUP
I even checkd the Functionmodule RSBB_URL_PREFIX_GET
I checked the SAP_BW alias /WAS property
All have the correct URL.
Does anyone know where else the wrong url could be located?
Thanks for your help
Murat

it suddenly worked

Unable to change window properties after upgrading project from X5 to RH8

Hi,
I just upgraded an existing project from X5 to RH8. In Windows Properties (HTML Help), if I make any changes and click OK, I receive the following message:
"For Width field please enter a value between 65 and 24."
If I do enter a value within those parameters in any of the "Width" options on the Properties page, I'm still presented with the same error message.
How can this be corrected?
Thanks!

Hi there
Perhaps try creating a totally new window definition and configuring the parameters as desired.
Once in a blue moon we see that the window definition somehow becomes corrupt.
Cheers... Rick
Helpful and Handy Links
RoboHelp Wish Form/Bug Reporting Form
Begin learning RoboHelp HTML 7 or 8 within the day - $24.95!
Adobe Certified RoboHelp HTML Training
SorcerStone Blog
RoboHelp eBooks

Photos missing after youtube upload from imovie export

I've got a stumper on my hands. i am working on a project that is 1/2 photos and 1/2 video.
I've exported an imovie project using the Share using the export quicktime settings under LAN/intranet.
the file plays fine on my computer but when i upload it to youtube and view it the photos dissapear?
the transition's on either end of the photo is shown but the photo itself is not. for instance if i showed a photo with a fade in and fade out the transitions apear, but not the actual photo.
anyone got any ideas on this one?

Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT

Error while Role Upload

Hello,
We have Enterprise Portal connected to the Backend SRM System and while trying to do a Role Upload from SRM to Portal ,I get the following error as below:
com.sap.portal.pcd.rolemigration.RoleMigrationConnectionException: Connection Failed: Nested Exception. Physical connection was not initialized. - message at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(System,en,userid,TWPN_GET_URL,SERVICE_TABLE,{ENABLE_LOGGING= , ROLENAME=<Rolename>OBJECT_ID=00000102}): Connection not available for system ''Connection Failed: Nested Exception. Physical connection was not initialized. at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:114) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Original exception: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Physical connection was not initialized. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:133) at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:371) at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:262) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorConnectionFactory.getConnectionEx(SAPCFConnectorConnectionFactory.java:156) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:295) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:256) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:446) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:84) at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:79) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Failed in creating the JCO Connection. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:456) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.establishInitialConnection(SAPCFConnectorManagedConnection.java:204) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.init(SAPCFConnectorManagedConnection.java:183) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:129) ... 15 more Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518) at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086) at com.sap.mw.jco.JCO$Client.connect(JCO.java:3296) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:429) ... 18 more
Any help would be highly Appreciated.
Thanks

Hi,
Please check the SRM system object connection in the SAP Portal. GO to system administration > system configuration > system landscape and search for SRM system object and test the connection. If connection test successful then try to upload the roles.
Hope it will helps
Best Regards
Arun Jaiswal

ERM - MASS ROLE UPLOAD

Hi All,
when using the Mass role upload from SAP backend systems, i expect that all roles will be uploaded to the final stage in the role methodology inthe ERM and that they will be already generated.
After all, those roles already exists in the systems.
well, i see that this is not the case and i have to go through the different stages with every role.
is this indeed the system behavior or did we do somthing wrong ?
thanks

Hi
We did as you suggested but configured the approval stage in the methodology since the role is already approved and is in ECC PROD.
Now we encountered a situation where we need to update the role in ERM as part of continuos maintainance (after upload) but we don't have the authorization option to enter and change it but only the "save" and "change history" push buttons.
We changed bach the methodology to the relevant one with all the stages but still we can't maintain the uploaded role. the change in the methodology did not effect the role already uploaded.
Do you have any suggestions regarding how we can fix this issue?
Thank you

Role Upload - Rename

Hello,
I have uploaded a role 'FI_ACCOUNTANT' from R3 into EP6 SP9. I have changed the name and description of this role in the editor to 'FI' and when I assign this role to my administrator/super admin userID, the modified name appears in the TLN. All very good.
However when I assign this role to a non-administrator userID, the TLN contains the original SAP role name!
I've played around with permissions but I don't think that's the cause.
Does anyone know whats going on here?
Thanks
Mr.T

Hi Tahir,
i am jagadish, i am new to portal implementation, i request to u could u please send Steps of Role uploading from back end system to portal.
this is my personal id : [email protected]
Regards,
Jagadish Babu Kanikanti.

Iviews created upon role upload

Hi all,
When i import the r/3 roles into portal some default iviews are created,but certain properties of Iviews are different for example "SAP GUI" it comes a "web gui" though i need to have "WinGui" . does any body knows how to change this..coz i cannot keep changing in all the iviews
Thanks
Krishna

Hi Krishna,
sorry for the late reply. I was out of office.
As far as I know there is no way to change the SAP Transaction type to WinGUI. But to be absolutely shure from your side, you could read the documentation.
According to your last post: You can of course change the property directly in the portalapp.xml. But the more correct way is to do it in the Portal Content area and edit the following iView: pcd:portal_content/com.sap.portal.migrated/ep_5.0/templates/com.sap.portal.appintegrator.sap.bwc.Transaction
There you can change the property (as mentioned above in one of my last posts) and you have to define this property as "FINAL". That's very important. But currently I see that it is not possible to set a property as final with the Property Editor in the portal. I have to contact the responsible developer in Israel, but they are out of office today. I will contact you again.
Of course, the iViews that were created during the role upload process have webGui defined. But if you launch them, they will be launched using the ..appintegrator.sap.bwc.Transaction launcher iView and this iView has the final property "WinGUI" defined, which is used.
Regards,
Stefan

Change properties of Roles in Abap web dynpro

Hello Gurus,
I need to hid or unhide a role based on a condition in my abap web dynpro.
Can anyone please update me how I can access it from abap web dynpro.
Is there an API call from abap to set or reset the invisible in navigation area value in portal?
Regards,
Dale

End of days play, this is what I was able to achieve.
Realised the masthead jsp is the best place to call my abap web dynpro as it is just after the login and at the load of default framework page.
I was able to call my abap web dynpro and on success, I am calling the homepage role.
What I have done in the jsp is written an if else statement:
1) If it is the first call to the jsp call my abap web dynpro in navigation mode 3. This ensures the roles are not visible and the redirection works before the page loads.
2) Else load the framework page as usual.
The only issue I have at this point is, I cannot depend on the first visit of the user.
I need to know in the jsp where the call to jsp is coming from, if it is coming from login page, i will direct the user to WDA else if the call is from my WDA, the normal load should work.
It would be ideal if my abap web dynpro could write something in the http header which the jsp could read as success. Still close but dont have the solution working yet
Regards,
Dale

On import, graphics resized after displaying object properties

Hello, my XML files contain many links to EPS files, such as:
<image href="mygraphic.eps" align="right" id="0B">
After importing the XML files, the graphics are sized correctly. They're exactly the size of the imported-by-reference graphic.
Some of the graphics resize if I display the object properties or simply save the file. For example, an EPS will resize itself 20%.
In one file that contains two images, only one might resize itself.
My read/write rules have no rules to resize a graphic on import.
What could I be missing?

Thanks for the suggestion, I'll give it a try. But I'm not sure I can even read any temperatures from this old gpu. I ran sensors-detect and it found none.
Also, if it was a heat issue, why does it go away as soon as I restart the X server? Surely it would still be overheating. Maybe it's time to take this thing apart again and clean it out.
Last edited by xamindar (2015-01-17 16:29:38)

Invalid objects found after R12.1.2 upgrade from R12.1.1

Hi all,
We had Oracle E-Business R12.1.1 vanilla installation before and just upgraded to R12.1.2 by applying patch (7303033), in which during this process there was an error stating some errors found at forms library.
And the below query;
select count(*) from dba_objects where owner ='APPS and status = 'INVALID''; --gave us 84 objects.
Due to this we ran a recompilation of the apps schema and Application database entire using the "adadmin" command, after which the above query has fallen down the output to "48" counts from "84" counts.
Basically the instalallation and upgrade has been done by the vendor of Oracle product to us and have no metalink account as yet ( which will be provided to us after the go live date).
I just want to know will this effect our production enviornment and if so how could I rectify it...
Thanks in advance for your assistance.
Regards,
Edited by: A.R.M Asif on Jul 6, 2010 11:40 PM

Pl also see this related thread - Re: Many db objects error after Upgrate EBS 12.1.1 to EBS 12.1.2(7303033)
HTH
Srini

Scheduling a Business Objects 4.0 Webi from Abap

Is there a way to pass in prompts and schedule a Webi report in Business Objects 4.0 from Abap? We have a situation where we want to email out a webi report to each of our sales reps with their particular sales information based on salesid.
Right now we would have to create and maintain about 250 individual scheduled jobs in Business Objects and that is a maintenance nightmare so I was wondering if we could use our scheduler in our ERP6.0 environment and write an Abap program to pass in the parameters needed to schedule the job in BOBJ.
For example, every Monday the Abap job would run and collect all salesmen info including salesid and email address and would then use that info to send the info to BOBJ to schedule and run the reports one time.
Hopefully what I am wanting is clear.
Thoughts?
Thanks,
Mike

Priyanka,
You need to STOP the Adaptive Job Server, this will STOP all scheduling jobs.
Regards,
Ajay

Iview object properties after role uploading from ABAP again

Similar Messages

Maybe you are looking for