Iview template for R3 Query (/nSQ01)

I viewed somewhere an iView that refers to a basic R/3 Query (/SQ01).
Where could I find the template for that iView ?
Thank you

You talking about R3 Iview based on transaction code: SQ01?
Procedure:
Inside Portal,
Step 1. Right click a folder and select New-> Iview.
Step 2. Choose SAP Transaction iView.
Step 3. Give the IVIEW a Title and an Id.
Step 4. Select SAP GUI for Windows.
Step 5. Select System(Alias) and specify SAP Transaction Code.
Finish and preview..
Prerequisite is the system alias...Your sys admin should define your r3 system as a valid system in portal.
More here:
http://help.sap.com/saphelp_nw04s/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm
Plz don forget points, if it helped
Regards,
p.

Similar Messages

Define iView template for role upload

Hi
We maintain our user roles in the BI system and use the role upload function in the portal. When a role containing eg. a BI report is uploaded to the portal an Iview for the report is automatically generated based on an iView template. How can I define which template the portal should use for generating the iViews?
Thanks
Morten

Hello Morten,
The templates are defined by the role upload and cannot be changed.
Regarding BI 7 Please see note: 1121962.
Also this are the thing you can configure in the role upload:
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/49b54061e78031e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/49b54061e78031e10000000a1550b0/frameset.htm]
Best Regards,
Assaf

How to set default Web Template for BEx Query iViews in Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE

Hi,
I don't think anyone is holding back knowledge, I think it's sometimes difficult to filter out "good" questions as opposed to "bad" questions...
In any case, I don't think it's possible to have different default templates, eg one for the portal and one for the "rest". I'm afraid you'll have to either change each one on the portal or use one for all.
Cheers,
Dion

How to set default Web Template for BEx Query iViews in BI Portal?

Hi,
1) In SPRO you can set the Standard Web Template used, e.g. ZANALYSIS_PATTERN1.
2) I published a query to Portal and when it runs within Portal, I want it to use a different web template, say ZANALYSIS_PATTERN2.
I don't want to change the BEx Web Application Query String property for each iView to hardcode the template e.g. to "QUERY=TestQuery1&TEMPLATE=ZANALYSIS_PATTERN2"
I only want the query name in the iView
Can I set this somewhere in Portal? I tried changing the standard "BEx Web Analyzer" iView as mentioned in
http://help.sap.com/saphelp_nw70/helpdata/en/33/39fa40ee14f26fe10000000a1550b0/frameset.htm (BEx Web Application or Query as iView in the Portal)
but it still seems to take the template from SPRO even after restarting J2EE
(I just published this question in Portal forum but I think it belongs here instead since it is BI Portal - apologies for the double-post..)

D Nore did you found the way to do it ?
I still have the issue, whatever the place where I force the template, the queries on the portal does not use my specific template.
I tried :
pcd:portal_content/com.sap.pct/platform_add_ons/com.sap.ip.bi/iViews/com.sap.ip.bi.bexwebanalyzer
(this one was working before upgrade to netweaver stack 17).
as well as
pcd:portal_content/templates/iviews/sap_bw_report_iview
and
pcd:portal_content/templates/iviews/sap_bi7x_report_iview
none works !
If you have the tricks share it with us.

Template for Adhoc Query

Hi
I need to create a role so that user can create and execute adhoc query. Please let me know the template that can be copied in this regard in BI
Thanks in advance

Hi,
with Regards to WebI you can create on Report based on a Universe....Design it as needed and save it. Afterwards copy it for each new created Report on the Universe.
With Regards to CR you can create your template and save it in the Template directory on your PC where CR is installed.
Regards
-Seb.

Web Template for BEx Query?

Hello,
How to find if there is any Web Template exist for a given BEx Query?
Thanks,
Dona Hill

Hi Dona,
You can find out by looking up the query in the metedata repository (RSORMDR) or by just pulling and collecting it in the transport connection.
Hope this helps...

Template for BW Query Technical documentation

hello experts
Can I find any template Docs for Query Technical documentation.
Thanks
SP

Hi,
Sorry to intrude.
Prakash, thanks for the transaction tip.
However, the cell definition generated from the transaction does not seem to fit well as part of documentation, which is quite a waste.
Any good template to document cell definition in a query?
Regards,
Simon

IView template for navigation Area

Hi all,
Did someone knows if there is a template or a framework to create special Iview for the navigation area , like page title bar or Masthead iView.
Thanks for your help,
Best Regards
Badr

Hi Badr,
Since u r renaming and making changes, the original files will not be disturbed. U can create iViews from ur new par files and so the original iViews will not be disturbed. I have not tried eventing in those iViews. May be u can try. I think it will work.
Steps:
1. Navigate to pcd folder I mentioned before.
There you can find the reqd par files with .bak extn.
2. Make a copy of the reqd file and rename it like my.new.masthead.par
3. Move my.new.masthead.par to a location outside of the <J2EE-Engine_Instance> somewhere to ur local disk.
4. Extract the files from my.new.masthead.par preserving the directory structure.
5. Modify files in the extracted PAR file.
6. Put the modified files back into my.new.masthead.par.
7. Copy my.new.masthead.par back to pcd folder or deploy the new par file.
8. Now u can create iViews based on these par files.
Regards
Harini S
Message was edited by: Harini Subramanian

Table to find web templates for a query in BI 7.0

Hi experts,
I am in BI 7.0. I have a list of queries.
i want to find out names of all the web templates where these queries are used as data provider.
is there any table in from where i can get this information??
Thanks in advance.

Hi,
Please check the table "RSZWOBJXREF" which gives Query name and Web template name.
or
you can check with the help of metadata repository.
or
the WebTemplate is stored as XML document. This is the XML code which is shown in the Web Application Designer. You need to read throught the XML using the Web Application Designer or using report RS_TEMPLATE_MAINTAIN_70.
Regards,
Marasa.

No WebDynpro iView Template found in content administrator menu (NW 7.1)

Dear Sir/Madam,
I tried to integrate a sample application in my local portal, but I did not found the webdynpro iview template to accomplish this in the content adminstrator menu.
I found the webdynpro iview template for webdynpro ABAP, but not the on for webdynpro java.
Is this a problem of my installation or are there some prerequisites which I miss?
Many thanks in advance for any input on this.
I am using Netweaver 7.1.
Wolfgang Rothmayer.

Thanks for the quick answer.
My problem is, that I do have the New->iView Menu but then I miss the
Web Dynpro Java application entry
Find below the screen I do have:
<<snip>>
Please wait
Your request is being processed
iView Wizard
Step 1: Template Selection
This wizard guides you through the steps required to create a portal iView based on an existing template. The template list reflects the contents of the cache, and may need refreshing.
Refresh
Choose Template: *
BEx Web Application iView
Crystal Enterprise Report
JDBC Stored Procedure iView
Proxy-to-Portlet iView (WSRP)
Related Services iView
SAP BSP iView
SAP IAC iView
SAP MiniApp iView
SAP RFC iView
SAP Transaction iView
SAP Web Dynpro for ABAP iView
Service Map iView
URL iView
Web Service iView
Workset Map iView
XML iView
Cancel Back Next > Finish
<<end snip>>
What is wrong?
Thanks again.
Regards,
Wolfgang.

New browser window for Jump Query

Hi SAPGuru,
     I have main Query with three jumps Query (QA, QB, QC). I created web template with main query and three other web templates for jump query. All are working fine. When I am running main query template and trying to jump from main query to QA web template. Its open a new browse window thats fine. So now I have total two browsers are open. Now when I try to jump from main query to QB that web template is showing in the browser window which is shown by QA. Means its overwrite QA query with QB query in browser.
     I need to open a new browser window when I jump from main query to child query. In short I like to open one browser for main query and three another browsers (QA, QB, QC) to jump query so, I can compare all query with different browser window.
         Am I missing something in web template side or IEs option side?
         Thanks in advance...

Check the RRI_DISPLAY_TARGET property of the web template. make sure you do not have this set to open in the QA window.
Thanks.

Custom xml transformer provider for xml iview template

I have been trying to get a custom simple xml transformer to work, which will show up in the xml iview template. I have seen the SAP Help docs and the recent weblogs on the subject. I can't get this simple transform functionality to work. I can get as far as registering my own transformer, however I get an error on the page when trying to use it: "Error while using XML iView, please contact your system administrator." My understanding was all I needed to do was provide a xsl, a transformers.xml file, and a service reference in the portalapp.xml.
All I really want to do is take some xml docs I created and display them in the portal. I know that I can write a quick java app to do this myself. However, I am trying to use the built in functionality of the portal (which it appears no one is using except for RSS feeds).
I would prefer to have the output be htmlb from my xsl file. My understanding was that I should create my own xml tranformer provider and then also use the XHTMLB --> HTMLB built in transformer.
Has anyone been successful in trying to create their own xml transformer for the xml iView?
I am wasting a lot of time trying to use methods in the SAP Help Docs, is it worth the effort to use the transformer method?
Eager to award points,
Sean

Hi
I have successfully deployed a transformer by doing the following:
In PAR, in /dist/xml/XSLLibrary/Transformers, put XSL
In /dist/xml, put transformers.xml file that describes the XSL
In portalapp.xml, add registry entry for transformer and service entry for transformer service.
If you want, you can send transformer PAR and I can look at it ([email protected]).
There could be something wrong with the XSL; this would be more complicated to diagnose.
Daniel

Urgent!! Default query template for all users.

Hi Guys,
How do I set the default template for queries for all users.
I saved the default template and did the setting settings>query on embed>use the default template. So the template eorked for me.
But when a different usre tried, the template did not load for him.
So is there a specific setting that can be done so that it apllies for all users.
Thanks
simmi

Hi Simmi,
There is a way that you can do this. Check this post for details as provided by Prakash:
Re: Permanent BW Excel Template
Hope this helps...

How to Use separate web template to a query, when default one is configured

Hi,
A default template is configured in SPRO. and all the queries display data using this template. Now I want to display a particular query result in a separed template that is customised to suit the need.
how can I achieve it? When I customise template and attach query to it, it displays the result in this template, when executed from WAD. If I execute from Bex, The result is automatically displayed in the default template mensioned in SPRO.
Please advise.

If you want this template to be attached to this query alone - then you will have to have the same as a separate iView on portal.. when you execute from BEx the default template will get executed and by changing the default template all the queries will start using the default template... it is not possible for you to specify the template to be used when executing queries from BEx Query designer..

How to get the whole list of Iview Templates

Hi,
when I navigate:
Portal Content -> Content Provided by SAP -> Templates -> Iview Templates
I get a long list of templates including Url Iviews etc
But, when I try to create my own Iview, the list of potential templates is much smaller, mainly including only the SAP related templates, BSP, Query, ITS etc.
Does anyone know how to make the full list of Iview Templates available for the Iview creation wizard ?
Thanks,
Tomas.

Hi Tomas,
which iView templates are offerd within the iView creation wizard is determined by SystemAdmin -- Permissions -- Portal Permissions -- Applications.
Normally, you will have to have SuperAdminRole to see/change these settings.
Hope it helps
Detlev
PS: Please consider to reward points for helpful answers. Thanks in advance!

Iview template for R3 Query (/nSQ01)

Similar Messages

Maybe you are looking for