IViews available in ERP 2004 vs ERP 2005
Hi,
can you tell me if the following iViews (regarding Personal Information), which I know available in ERP 2005, are also available in ERP 2004?
And if so, where can I find them?
iView: Address
iView: Bank Information
iView: Personal Data
iView: Family Data
Thank you for your help.
Best regards.
Hi Jubish,
thank you for your answer.
We were able to find the iView "Personal Information" in ERP 2004.
From what we were told, in ERP 2005 "Personal Information" is like a container of the four iViews I listed above (Address, Bank Information, Personal Data, Family Data). Can you confirm this?
Anyway, we double clicked the "Personal Information" iView in the Content Administration, and we clicked the Preview button. The window that appeared showed these mandatory parameters:
DefinitionType (with the default value "Java")
System (with the default value "SAP_WebDynpro_XSS")
Application Name
At this point we didn't know what to do.
We tried entering "Address" in the "Application Name" field and then clicking on the "Go" button, but then the window asked for the WebDynproNamespace...
Can you tell us if the functionalities provided by the four iViews in ERP 2005 are accessible by this single "Personal Information" iView in ERP 2004?
If so, can you tell us how could we get access to these functionalities?
Thank you again for your help.
Best regards.
Gianluca Barile
Similar Messages
-
BPS with mySAP ERP 2004 vs. BPS 3.5
Hi all,
Whats is the <u>context</u> difference between Solution Consultant Financials - Strategic Enterprise Management - CPM & BPS with mySAP ERP 2004 certification exam and Solution Consultant mySAP ERP Financials Strategic Enterprise Management
CPM & BPS (SEM3.5) certification exam? SAP says that the former exam's BPS section includes :
Comparison of SAP system and SEM-BPS
Data basis for SEM-BPS
Integrated use of SAP system and SEM-BPS
Integrated business planning
Business plans
Planning design and architecture
Locking concept
Layout Builder
Interface between SEM-BPS and BW
Structure and characteristics of planning functions
Variables
Key figure model and account model
Data transfer structures and multi-planning areas
Planning folders
Web Interface Builder
Comparison of planning interfaces
Planning hierarchy in SEM-BPS
Hierarchies and attribute assignment in BW
Characteristic relationships in SEM-BPS
Top-down and bottom-up modeling
Realignment
however the first exam includes:
Focuses on integrating subplans for a business plan, such as planning results, overhead and personnel costs, investments, balance sheets, and liquidity.
Overhead cost planning with primary and secondary costs
Balance sheet planning using financial planning functions
Personnel cost planning
Liquidity planning and cash flow analysis
CPM part of both exams are same, but why there is a difference in BPS part?
I am planning to take Strategic Enterprise Management - CPM & BPS with mySAP ERP 2004 certification exam, I am wondering what you know about these 2 exams? What topics should I focus on?
Thanks,
KaanHello Kaan,
the SEM 3.5 exam is simply based on an older version. You should take the mySAP ERP 2004 exam (or 2005 once this comes out). The BPS functionality has changed only marginally so it's not really a different, but it's nicer to have a recent certification of course
Regards,
Marc
SAP NetWeaver RIG -
What new features are offered by mySAP ERP 2004 in MM module.
I have checked the release note but it speaks about FM and its integration , utility in MM and also few new BADIs.
Pl point out any <b>other new functionality</b> which was not there in earlier version and is now available in mySAP ERP 2004 or 2005 ???
ThanksHi Sagar,
Difference between version on functionalities you can find on the following link.
Give the source version (i.e. 4.6 C) and select the target version (i.e. ECC 6.0)
http://solutionbrowser.erp.sap.fmpmedia.com/
Release notes :
http://help.sap.com/saphelp_erp2005vp/helpdata/en/43/6880cbb88f297ee10000000a422035/content.htm
Hope this helps.
Reward if useful
Aasif -
Limitations of upgrading from ERP 2004 to 2005
We are evaluation completing an upgrade from ERP 2004 to 2005. However, we found a limitation in note 879335 regarding upgrading the portal.
We have an Enterprise Portal instance that is separate from the SAP ECC J2EE add-in. The ESS components including XSS run on the J2EE add-in.
According to this note, we cannot upgrade the XSS component on the J2EE add-in because it
is not running on EP. Does this mean we need to undeploy the XSS components and then upgrade the J2EE and then install the XSS component? or Do we need to import the XSS component on EP and then
upgrade?
Why is this a limitation?I have isolated the issue further. In the following code fragment the event is being fired twice the first time and never again:
If pVal.FormType = 133 And pVal.EventType = SAPbouiCOM.BoEventTypes.et_FORM_LOAD Then
'// get the event sending form
'SBO_Application.MessageBox("Hello world")
oForm = SBO_Application.Forms.GetFormByTypeAndCount(pVal.FormType, pVal.FormTypeCount)
oNewItem = oForm.Items.Add("Button1", SAPbouiCOM.BoFormItemTypes.it_BUTTON)
oNewItem.Left = 285
oNewItem.Top = 382
oNewItem.Width = 100
oNewItem.Height = 19
oNewItem.FromPane = 0
oNewItem.ToPane = 1
oButton = oNewItem.Specific
oButton.Caption = "New Button"
End If
End Sub
The code is an adaptation of the SDK VB.NET sample ('11.SystemFormManipulation'), which is supplied with the latest version of the SDK installation.
The big question is why is the event being fired twice. -
Compensation Planning iviews in ERP 2004
Hi,
I am using mySAP ERP 2004 60.1 ESS/MSS package on EP 7.0. But its does not contains the compensation planning iviews that was there on the java based ESS/MSS.
Is the compensation planning iviews not supported in ERP 2004.
Any suggestions?
Regards
Debasishhi, you need installing ERP 6.0 EHP4 for implementing Compensation Planning Iview
The path in the ECC Content for SAP > Line_manager > Manage Self-Service -iViews - Compensations Planning
before you need installing Jco, Sld, for ESS&MSS -
R/3 Enterprise v mySAP ERP 2003 v ECC 5.0 v mySAP ERP 2004
Dear All,
We are finalizing a proposal to upgrade our ancient SAP 3.1H system. Fortunately there are a number of options available to us and we need to know the differences between them.
We would be very grateful if anyone has any information regarding the PRO's and CON's of each of the above options in the subject title e.g.
what are the differences between mySAP ERP 2003 and 2004?
Is there a web page or document that summarises this information? What are the advantages of ECC5?
And the big question, what is the best way we can justify to our board an upgrade to anything higher than SAP4.7??
Any links/suggestions/documentation would be greatly appreciated.
Nigel Blanchard
Business AnalystHi Nigel,
Just to help narrow down you decision: ECC 5.0 is part of mySAP ERP 2004 so this is one choice. My suggestion would be to go to the latest version that you are comfortable with. Most companies are choosing mySAP ERP 2004 over SAP R?3 Enterprise (the 4.7 release you mentioned). There are a few companies who are planning for mySAP ERP 2005 which just entered ramp up.
It really comes down to two factors: What business functionality would you like to have access to and how leading edge does your company want to be?
The safe choice is mySAP ERP 2004 but if your company does not do upgrade with high frequencies (i.e. still on 3.1H) you may want to consider the mySAP ERP 2005 release.
Customers are really happy mySAP ERP 2004, I would suggest that you ask the question to some of the SAP user groups (like ASUG). They should be able to confirm this.
Cheers,
Mike. -
Difference between R/3, mySAP ERP, SAP ERP 2004..
Hi guys,
I'd like to know, what's the difference between R/3, mySAP ERP, SAP ERP 2004 (or other terms). Sometimes I see R/3, sometimes ERP... I'm a little bit confused.
Thanx for answers!
PeterHi,
SAP R/3 is package which is available in different versions 3.1i,4.6c,4.7. mySAP ERP 2004 i.e. ECC 5.0 and mySAP ERP 2005 i.e. ECC 6.0 are advanced versions of SAP R/3.
Please refer one more link.
http://solutionbrowser.erp.sap.fmpmedia.com/
Here you will be able to know difference in functionality for different modules.
Regards
Tushar A.Vhora -
ESS with SAP ERP 2004 ECC 5.0
Hello,
with SAP R/3 we used the Employee Self Services via an external ITS. Now we are using SAP ERP 2004 ECC 5.0 with an installed Java AddIn without Enterprise Portal.
My Question is:
What ways are possible, so that we can use the ESS functionality?
My Ideas are:
1. Use the old external ITS and connect it to the new system.
Problem: Is the connection possible?
or
2. Use the existing services from the internal ITS.
Problem: It seems that some are not working - is it possible to activate them?
or
3. Use the WebDynpro-Technology without Enterprise Portal.
Problem: Will it work?
All information I could find, is, that none of the mentioned ways will work, but maybe someone tried to do the same and was successful.
Thanks for ideas,
AndréHello Andre,
I don't have experience with using ESS web dynpro applications standalone without EP but I believe that should work just fine. We use standalone web dynpro applications for our mobile ISR/PCR approvals where we access web dynpro application directly via Blackberry. You should be able to access any web dynpro application directly without EP iView - for certain services you will need to provide the correct attributes and values via URL though.
Hope that helps you a little bit,
Harald -
Can we run ERP 2004 XSS applications in combinations with NW04s XSS 600?
Want to know if we can run ERP 2004 XSS applications in combinations with NW04s with 2004s BPx (XSS600)?
So our Portal is NW04s with J2EE engine 7.0 and our ECC system runs Xss 100.Hi Alan,
Our Portal is NW04s with J2EE engine 7.0 and our ECC 6.0 running Xss 600
coming to your question,
The business packages ESS/MSS for SAP ERP 2004 and SAP ERP 2005 can be installed and used in parallel in Enterprise Portal (EP) NW04s, only if
ECC 5.0, XSS 500 on J2EE 6.40 is linked to BP ESS/MSS (SAP ERP 2004) and
ECC 6.0, XSS 600 on EP NW04s is linked to BP ESS/MSS (SAP ERP 2005)
Please see Note 1034385 for more detailed description.
Thanks and regards
Rohan -
Error when testing connection from EP6.0 to ERP/2004
Hi this is Omar Poueriet and my case is the following:
Recently I finished to installed an EP60 SP19 based on Java+ABAP addin and everytime and then I logged on my EP system and define the corresponding settings for:
Connector property
User Management property
WAS property
ITS property
with their corresponding values at each stage, now everytime I try to test the connection in order to see that everything has gone fine, an error message is displayed at every defined connections, meaning the following:
<b><b>"HTTP/S connection failed. Make sure the protocol, host name, and user mapping are correctly defined."</b></b>
Please if any of you GURU's has any idea of what's going on this case, feedback ASAP, because I have some pendient task to complete based on EPortal 6.0 and ERP/2004 and that's STOPPED by the moment.
Awaiting for your feedback shortly,
Regards
Omar PouerietDon't worry if the connection tests fail. It is better to create an iView that uses the system and see if that works...
Cheers -
BIW 3.1C with mySAP ERP 2004
Hello,
I have R/3 4.6C and BW 3.1C. Now I want to upgrade my R/3 to ERP 2004 for this do i need to upgrade my BW also or can i use same BW 3.1C with upgraded R/3 version?
Thanks in advance
-Amit ThombaeAmit
Welcome to SDN
As per my understanding SAP is going to stop support for BW3.1C version some time end of this year or begining of next year. Since you are upgrading your SAP system it is good idea to Upgrad BW also. Because BW 3.5 and 7.0 versions have lots of new features and standard business content related to ERP 2004. If you don't upgrade you all these features won't be available. But you could still continue with your 3.1 version if you don't want to utilize the new features of BI.
Hope this helps
Thnaks
Sat -
Is mySAP ERP 2004 is UNICODE compliant
Dear Friends,
We are planning to upgrade from 4.6c to mySAP ERP 2004.I would like to clarify is mySAP ERP 2004 is unicode compliant or not.Asking this I mean all the data will be organized in unicode format in the new system when we are migrating or not.
I would be happy if some one can let me know efforts that are need to upgrade from mySAP ERP 2004 to 2005.
Thanks & Regards
MrutyunjayUnicode and non Unicode systems can co-exist in the same server, indeed. I have done it several times without any issues. Is it a fresh installation or a conversion? Make sure that you follow the SAP recommendations for additional CPU/RAM/disk space if you convert
HTH
Andreas -
Ldap integration on mySAp ERP 2004
Hi,
1°)I'm installed SAP ERP 2004 for use ESS webdynpro.
I'm configure LDAP connection since SAP Portal, and now, all my client ( on LDAP system ) are connected on SAP PORTAL. That's very good.
2°)I'm implemente a "replication "fonction in SAP Portal for automaticly create a same user on ABAP system.
That's good.
Now, if I'm create a new user on portal system, a same user is create on abap system. That's very good...
But if I'm implemente the 2 solutions on my system, LDAP user can connected on SAP Portal ( SAP Portal see it on LDAP system ) but the replication doesn't run because no user is created on SAP Portal.
The LDAP fonctionnalities is very good but I didn't know how apply it on ABAP system???
Which solution should be implemented for that one LDAP user can launch a ESS webdynpro automaticly???
Thanks in advance,
Best Regards,
DavidHello
Not clear with your question. But, have you decided on where to keep the user stores ...
1. Corporate users
2. SAP users
The corporate users can be in the LDAP and you can authenticate portal users against the LDAP.
The sap users are defined seperately in the sap user store (the logon ids match the windows logon (ldap)).
The next step is to configure SSO between the J2EE engines of ERP system and Portal (if they are on a different host).
Define the ERP system in the portal, enable SSO and assign the role to the user. You should be able to then access the ESS iViews seamlessly.
The help documentation provides all in detail I mentioned above.
Arun -
Guidelines to Installation on SAP ERP 2004 SR1
Hi Friends!
This is Anand Here
I am totally new to SAP
I was trying to install SAP on 2003Server
while installing the ABAP System-Central Instance
I Got this error message
An error occurred during the installation of component SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation. Press the log View Button to get extended error information or press OK to terminate the installation. Log Files are written to SAP ERP 2004 SR1>ABAP System>Oracle> Non-Unicode>Central Instance Installation
The following error occured and the installation could not proceed
ERROR 2007-12-27 20:33:33
FSL-00001 System Call Failed. Error 5 (Access is denied.) in execution of system call 'FindFirstVolumeMountPoint' with parameter (
?\Volume{c682cb5b-b31d-11dc-be09-806e6f6e6963}\), line (77) in file (synxcfsmit.cpp).
ERROR 2007-12-27 20:33:33
MOS-01235 Module function getInfo of module CIa0sMount Failed,
Can Somebody help me with thisHi Anand,
Seems like you failed to complete the pre-installation steps...
As far as i can see there a Mount access failure, meaning the shares or mounts necesary for the installation are either unavailable or the user <sap>sid don't have enough rights to use it.
Check all your pre-intallation steps (included on the installation guide available at SAP Marketplace) and try it agian.
regards
Juan -
Unable to find business package for mySAP ERP 2004(Rel 60.2)
Dear Experts,
I logged into SDN by using service marketplace account and tried to
download the business package for mySAP ERP 2004( Rel 60.2) from portal
content portfolio. But when clicked on the download icon, I am
redirected to Service Marketplace but I am seeing message "No Data
Available".
Is it faced by everybody or I am the only one guy who has this ill fate.
Thanks,
-BharathHi,
please try again. The package should be available for download as long as you hold the required license.
Alternatively, you can send details of the error to [email protected]
Kind Regards, Anke
Maybe you are looking for
-
Sender FileContentConversion - Message tranformation bean - documentOffset
Hi am using a sender SOAP adapter with 'Servlet (Axis)' as transport protocol and 'Axis' as message protocol. I am using the MessageTransformBean to do my file content conversion. There is a header line in the file which contains column names. Sample
-
Hi, I'd like to use the components in the Director Library to make an e-mail form (your name, your e-mail address, your friends e-mail address and the message). Does anyone know a Script that can be attached to the Submit button that will actually se
-
Ethernet has completely stopped working
Here is what happened: This morning, my ethernet port was working just fine. I could and did connect to the internet. I was working on my Windows side (recently installed Windows 7 from Windows XP Service Pack 3 on Boot Camp. Installed both the drive
-
Can't start the Import Export Wizard - "No Description Found"
Microsoft SQL Server Management Studio 9.00.3042.00 Microsoft Analysis Services Client Tools 2005.090.3042.00 Microsoft Data Access Components (MDAC) 2000.085.1117.00 (x
-
MBP 2011 - Ext. Screen not detected during boot
Hey everyone, I got a new MBP 15" (2011) and I'm having issues with my screen (Acer X243HQ) during boot. It just doesnt get recognized when I boot the machine. Everytime I need to unplug it and plug it back in - which gets kinda annoying as the MBP m