Iviews created upon role upload

Hi all,
When i import the r/3 roles into portal some default iviews are created,but certain properties of Iviews are different for example "SAP GUI" it comes a "web gui" though i need to have "WinGui" . does any body knows how to change this..coz i cannot keep changing in all the iviews
Thanks
Krishna

Hi Krishna,
sorry for the late reply. I was out of office.
As far as I know there is no way to change the SAP Transaction type to WinGUI. But to be absolutely shure from your side, you could read the documentation.
According to your last post: You can of course change the property directly in the portalapp.xml. But the more correct way is to do it in the Portal Content area and edit the following iView: pcd:portal_content/com.sap.portal.migrated/ep_5.0/templates/com.sap.portal.appintegrator.sap.bwc.Transaction
There you can change the property (as mentioned above in one of my last posts) and you have to define this property as "FINAL". That's very important. But currently I see that it is not possible to set a property as final with the Property Editor in the portal. I have to contact the responsible developer in Israel, but they are out of office today. I will contact you again.
Of course, the iViews that were created during the role upload process have webGui defined. But if you launch them, they will be launched using the ..appintegrator.sap.bwc.Transaction launcher iView and this iView has the final property "WinGUI" defined, which is used.
Regards,
Stefan

Similar Messages

  • How to Change Default Iview Properties for Role Upload?

    Hello,
    We have many roles to upload from R/3 ABAp system to NW2004s EP.
    We use the Role Upload tool in the Portal to achieve this.
    It works fine, the roles are created in the portal and can be assigned to users.
    The fall back is that we have to modify every single transaction iview in the portal after the upload to modify the SAP GuiType from "SAP GUI for HTML" to "SAP GUI For Windows".
    How can we change the default model used of SAP GuiType for uploading transaction iviews in uploaded roles?
    Also, the uploaded role is not flaged as an "Entry Point", is there a way to set this marker to "Yes" as a default value for all uploaded roles?
    Best regards.

    This is one of Acrobat's less intuitive areas!
    For defaults, right-click on the text box that is as you want it: then select menu item 'Make current properties default'
    Use Ctrl-E to bring up the Properties toolbar: its content will change depending on whether you have the box or the text selected, and selecting the box or text can be a bit clunky.
    Steve.

  • Define iView template for role upload

    Hi
    We maintain our user roles in the BI system and use the role upload function in the portal. When a role containing eg. a BI report is uploaded to the portal an Iview for the report is automatically generated based on an iView template. How can I define which template the portal should use for generating the iViews?
    Thanks
    Morten

    Hello Morten,
    The templates are defined by the role upload and cannot be changed.
    Regarding BI 7 Please see note:  1121962.
    Also this are the thing you can configure in the role upload:
    [http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/49b54061e78031e10000000a1550b0/frameset.htm|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/5b/49b54061e78031e10000000a1550b0/frameset.htm]
    Best Regards,
    Assaf

  • Create an iview for batch document upload to KM

    Hi, I´m trying to create an iview for batch document upload to the portal. At the moment, I've only been able to upload documents from a source directory in the server, given an xml file uploaded from the client, which indicates the location of these files.
    The inclution of the uploaded file to KM is not an issue, that is already solved. I'm just trying to make it usable by an administrative user that may not have access for creating folders in the portal server, unlike me.
    I need help doing one of these two things:
    1. creating an upload percentage status bar
    or 2. accesing the client's directory to upload and insert the file into the repository one by one.
    Can anyone help?
    (by the way, I'm trying to to exactly what the portal epa import iview does, but with documents, so i know it's possible, i just don't know how)

    See /thread/71174 [original link is broken]

  • Iview object properties after role uploading from ABAP again

    Hi,
    Now it seems that the properties of the iviews that were uploaded from ABAP stack are overwrittened when this role is uploaded again from ABAP stacks.
    I wuold like to set the property of the iView as "start with another window". but they are now overwritten after role uploading.
    if someone know good idea, please advise.
    Kind regards,
    Masaaki

    Hi Tilak,
    I think you query is not be not answered.
    When you upload the role (click on start upload )you need to wait until the status is Finished.The role that you have uploaded can be seen in portal content - content Administration-> portal content-> migrated content-> roles-> u201Csystem nameu201D .
    If you are not able to see mean your role is not uploaded correctly.
    And my suggestion is first check the service com.sap.portal.pcd.rolemigration"
    Hope this resolves your problem.
    Cheers!!
    VEnk@

  • IView Template used when uploading role from R/3 to Portal

    Hi all,
    I was wondering what iView template is used when you upload a role from R/3 that contains Web Dynpro ABAP applications.  I want to change some of the default parameters in the template, more importantly, close the Detailed Navigation panel on the left.
    Hope this makes sense,
    Thanks,
    Kevin

    Hi Kevin,
    From your explanation, it seems you can see the iViews in Portal role editor under Content Administration.
    Under Content Administration
    Open the Role for Editing
    In the Editor, select the iview and Click on OPEN button.
    Now, you should be able to see the properties of the iView in the Editor.
    Please check for the property "Code link", which give you the details of the class or template in use.
    Hope, this will help
    Cheers!!!
    Biroj

  • Hide automatic created folder from role upload

    Hi,
    when I make a role upload to the portal, a top folder with the same name as the role is automatically created. Is it possible to disable this feature or hide the folder afterwards?
    I have created my own folder structure in the portal, which defines the first two levels of navigation, and then made a delta link from this structure to the uploaded role. The content of the uploaded role is automatically put in a folder on third level instead of directly under the second level folder. This way the user has to click first on the role and then on the folder to get to the content. This is not very user friendly.
    Hope someone can help.
    Regards Morten

    Have you tried changing the 'Entry Point'  property within the uploaded roles ?
    When you do a role upload, you have the chance to automatically create the roles as worksets (rather than portal roles).  Have you tried doing this?  I think you get fewer levels (from memory)
    Also,  is your composite (backend) role design already in place and finished?  It is worth trying to consider the portal when doing the backend composite role design in order to prevent issues like this.
    Award points if this helps

  • CREATING CUSTOM WBDYNRO IVIEW IN ESS (ROLE), WORKING TIME ( AREA).

    Hi Experts,
    I Developed a webdynpro abap component, and now i should create an iview in ESS(ROLE),WORKING TIME (AREA), TIME SHEET(SUB AREA), So please provide me requried information show that i can finish this task, It will be very  great full if you provide me the document with screen shot so that i can understand clearly .
    Thanks & Regards
    Bhushan.

    Hi Bhushan.
    After developing  webdynpro abap component,
    1.Applciation should be intergrated into portal under ESS -->working time(Area) so for any ESS related portal intergration are done from Home page are Framework(SPRO)Transaction code in (R/3)backend system.
    2.There are step wise configurations to be made in SPRO>img>home page area framwork like
    a.created applciation pcd location is to be added to the particular ess role where the page pcd is made copy and used in the configurtaions done at backend .
    b.normal hoem page area has standard steps like define resourse add that resource to the service -->add service to the area of working time and then the portal gets effected with the changes of the back end
    note:in the resource creation pass the url paramaets as = ROLES://pcd location of Your application
    If you still Have the issue check on with sdn site ,or else reply back i try help you out with more details.
    Thanks & Regards
    AshwinChandraGirmaji

  • First iView in the Role only transferred to SAP and next two ignored

    Hi,
    I have three iViews in a Role and when I transfer only first view is been transferred to SAP backend (wp3r) whereas the next two iviews are ignored. Is it something I have to change the iview properties ? Any ideas ?
    I want to transfer all the three iviews with the role. Could anyone please help.
    Many Thanks

    Thanks Michael
    When I tried changing the order of the iviews, I replaced the first iview with second one and it did
    transferred second iview by ignored first (When I converted the role in wp3r i can only see second iview now before it was showing first iview).
    Now, I did two roles for two iviews and they are transferred to backend alright.
    When I upload the iview to the backend in wp3r i can see the portal role name, system then I have created the role and merged it, all in green lights. Can also view the iview under the authorization role i have created. Portal admin is not involved I'm doing all this stuff.
    When you say Alias I hope you are talking about system Alias, which is anyways same for all iviews.
    Thanks very much for you help.

  • Problem after role upload?

    Hi All,
        I used role upload tool and uploaded them to my portal. I uploaded only role to user assignements (I dont want to upload transactions etc..). I just wanted to get role to user assignments from ABAP system.
        I got them under Migrated Content -> SAP Component systems. I checked if the users and roles are assigned properly. IT was correct.
      Now, I wanted to add few iviews for my role that is uploaded. so i created a delta link into my working folder and added few iviews,worksets and set the entry points.  and when i logged in as user, I cant see my workset in TLN.
      I just wanted to know, doesnt the delta link of roles copies the user assignments of source role to the target role. should i do it manually again to assign the user to that delta link role.
    Please help me in this regard.
    Thank you

    any help is appreciated ??

  • Role Upload - System Aliases not used

    We are having a strange occurance during role upload.
    In the migrated content area, iViews are being created in folders that refer to system aliases used (e.g. R3, BW, etc.).  However, the "System" property of each iView is set to the logical system name (e.g. RDV123, BDV123) rather than the alias.  We would like the role upload to set the "System" property to the alias names by default.  Does anyone know how to accomplish this?  Does anyone know why it doesn't do this in the first place?

    Thanks for the input.
    Right now my system connectors are all setup with their logical names (e.g. RDV123) as well as a generic alias that is used across landscapes (R3).
    My dilemma is transport to QA and Production. I could very well go into PROD and QA and make an alias on those production systems for dev (e.g. make an alias for RPR123 to also show as RDV123), but this would create conflicts.  I;d prefer to just use very generic aliases across all systems such as "R3".
    Is there no way into tricking the role upload into referencing some table to know that instead of logical name, use default alias so it will be transportable?

  • Role upload core modification

    Hi,
      Currently SAP delivers role upload tool to upload the roles,transactions,miniapps etc... to portal. It works fine. we have a requirement that when the transaction is uploaded, the iview that is created should have the NAME: "transaction description" + "transaction code".
    By default the NAME is just transaction description. To do this, I was checking the PAR files associated with role migration. I found a class with name "IROLEMIGRATIONCONSTANTS.class" in com.sap.portal.pcd.rolemigration.par.
    IN that I found a code block
    public static final String CALLING_MAPPER[][] = {
                "functionName", "functionOutTable", "range"
                "TWPN_GET_AV_ROLES", "ROLES", "ROLE_RANGE"
                "TWPN_GET_AV_TRANSACTIONS", "TRANSACTIONS", "TCODE_RANGE"
                "TWPN_GET_AV_MINIAPPS", "MINIAPPS", "APPNAME_RANGE"
                "TWPN_GET_AV_MINIAPPS_OLD", "MINIAPPS", "ROLENAME_RANGE"
                "TWPN_GET_AV_URLS", "URLS", "URL_RANGE"
    I thougt that I would achieve the desired with the entry "TWPN_GET_AV_TRANSACTIONS". we made a copy of this BAPI and did the changes and executed it, which shows the result as expected ,(I executed in R3).
    Now I want this to be executed from portal. so in the IRoleMigrationConstants.class that I was mentioning, I edited just that entry "TWPN_GET_AV_TRANSACTIONS"  with my BAPI name "ZWPN_GET_AV_TRANSACTIONS" and uploaded the PAR again.
    now when I run the role upload tool, the iveiw name was not as desired. It was just as before (i.e. just transaction description).
    So as another test, I put "XYZ" (there is no BAPI with this name in R3) in place of "TWPN_GET_AV_TRANSACTIONS", in the IROleMigrationConstants.class and uploaded it again and expected an error. but the role upload tool was working as before, which means, it didnt call this BAPI.
    could you please tell me where am i going wrong.
    The reason why we want to do this is, we have 250 transaction iviews and changing the name for all 250 when i run the upload is really hectic.
    could you please suggest me, how can i proceed.
    is there any other way of achieving my requirement.
    Did anyone had this requirement or sort of. If so how did you proceed.
    Thank you

    changed TWPN_GET_TRANSACTION

  • Does each SAP transaction iview create a log on to the backend ECC?

    Hi,
    If I put multiple SAP transaction iviews in a role, each pointing to a different SAP transaction in the same backend system, does the launch of each iview create a new logon in the backend system when using SAP logon tickets?  If so, is it possible to make it only launch a new session if one logon has already been created?
    Regards
    Cindy

    Hello Cindy,
    launching of diffrent Transactio Iview form same back end is quite similar as loged in to backend with Proper credentials and opening diffrent transaction's by useing
    /oxx(Transaction Name)
    Hope it will add to ur knowladge.
    Regards.
    Soni Vinit

  • Error message in the BW role upload

    Hello Guys,
    When I have uploaded a BW role in the portal in the following path: System administrations -> Transport -> Role Upload, the system has done the following message error: “Check system configuration for alias XXXX, system: null – failed to retrieve logical system idSEVERE: getObject”.
    However, when I have gone to the Portal Content, in the following path: SAP Portal Migrated -> SAP Component Systems -> Roles, my BW role was created and it has two folders below that are empty. The reports didn’t come to portal.
    I have tested the system that link the portal and the BW system, and works fine.
    Can you help me please?
    Thanks a lot.
    Mary

    Hi,
    Please make sure that the alias of the system is the same as the logical name of the system.
    The system alias must match the logical system name of the ABAP system.
    Best Regards,
    Assaf Klieger
    Installed Base Development
    NetWeaver Portal Platform
    SAP Labs Israel

  • Error while Role Upload

    Hello,
    We have Enterprise Portal connected to the Backend SRM System and while trying to do a Role Upload from SRM to Portal ,I get the following error as below:
    com.sap.portal.pcd.rolemigration.RoleMigrationConnectionException: Connection Failed: Nested Exception. Physical connection was not initialized. - message at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(System,en,userid,TWPN_GET_URL,SERVICE_TABLE,{ENABLE_LOGGING= , ROLENAME=<Rolename>OBJECT_ID=00000102}): Connection not available for system ''Connection Failed: Nested Exception. Physical connection was not initialized. at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:114) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Original exception: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Physical connection was not initialized. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:133) at com.sap.engine.services.connector.jca.ConnectionHashSet.match(ConnectionHashSet.java:371) at com.sap.engine.services.connector.jca.ConnectionManagerImpl.allocateConnection(ConnectionManagerImpl.java:262) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorConnectionFactory.getConnectionEx(SAPCFConnectorConnectionFactory.java:156) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:295) at com.sap.portal.ivs.internalconnector.ConnectionProvider.getConnection(ConnectionProvider.java:256) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:446) at com.sapportals.portal.ivs.cg.ConnectorService.getConnection(ConnectorService.java:84) at com.sap.portal.pcd.rolemigration.util.Connector.callFunction(Connector.java:79) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1328) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.doDependentObjects(RoleMigrationObject.java:4974) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4734) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.save(RoleMigrationObject.java:4303) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:1497) at com.sap.portal.pcd.rolemigration.RoleMigrationObject.migrate(RoleMigrationObject.java:686) at com.sap.portal.pcd.rolemigration.RoleMigrationThread.run(RoleMigrationThread.java:525) Caused by: com.sapportals.connector.connection.ConnectionFailedException: Connection Failed: Nested Exception. Failed in creating the JCO Connection. at com.sapportals.connectors.SAPCFConnector.SAPConnectorException.getNewConnectionFailedException(SAPConnectorException.java:107) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:456) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.establishInitialConnection(SAPCFConnectorManagedConnection.java:204) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.init(SAPCFConnectorManagedConnection.java:183) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnectionFactory.createManagedConnection(SAPCFConnectorManagedConnectionFactory.java:129) ... 15 more Caused by: com.sap.mw.jco.JCO$Exception: (101) RFC_ERROR_PROGRAM: 'user' missing at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:518) at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:1086) at com.sap.mw.jco.JCO$Client.connect(JCO.java:3296) at com.sapportals.connectors.SAPCFConnector.connection.SAPCFConnectorManagedConnection.connectWithJCO(SAPCFConnectorManagedConnection.java:429) ... 18 more
    Any help would be highly Appreciated.
    Thanks

    Hi,
    Please check the SRM system object connection in the SAP Portal. GO to system administration > system configuration > system landscape and search for SRM system object and test the connection. If connection test successful then try to upload the roles.
    Hope it will helps
    Best Regards
    Arun Jaiswal

Maybe you are looking for