Iviews placed side by side do not fit in page.
Migrating from EP5 to EP6
I have a set of 6 iviews side by side and they fit on the page with no problem.
I bring the same iviews over to EP6 and now a scroll bar is on the bottom page. The iviews did not get any bigger. Is there a way to force a full page?
This is just odd, any ideas?
Thanks. I had already found the same solution you found. I think the problem occurred when Firefox upgraded and my settings got changed.
Similar Messages
-
Hi all,
I'm creating a smartform which prints one internal table consists of 36 fields. In table line type i have mentioned the 36 fields. First four are of 4CM and other 32 fields of 2CM width. So in total i have mentioned as 80 CM.
But its showing an error like 'Main window does not fit into Page'.
What could be the mistake?
Can anyone help me in this..
Regards,
ShanthiHi,
U have to adjust the 36 fields into 21 cm by Allocating Space accordingly.
if Your Space is small then data will be displayed in the next line.
And display The data in Smallest font possible.
Regards
sandipan -
Text not fitting on page correctly...?
I'm using the "Watercolor" template in iWeb, which has a "page" on top of the background, therefore creating an edge. When I increase the content width in the Page Inspector, the green header does not "widen" with the page; it's a locked length and only the beige "page" expands on the top right. It looks like this, which I don't want:
http://www.bristolscreens.com/BristolScreens/OP%3A_PorchSystems.html
But the issue is this: My header copy ("Bristol Screens") won't fit on the header. The text box doesn't even reach the edge, and yet my copy is moved to the right and cut off. It looks like this on the home page:
http://www.bristolscreens.com/Bristol_Screens/Home.html
And like this on the following pages, where it's moved to the right and almost overlapping the subhead copy ("About Porch Systems"):
http://www.bristolscreens.com/BristolScreens/About_PorchSystems.html
Anyone know how to make my header copy stay put while not increasing the width of the actual web page?
Thanks for the help... it's much appreciated. I hope this explanation of my problem isn't too confusing!Welcome to the Apple Discussions. That's one of the problems with most of the themes in iWeb. They do not allow increasing the width of the page since they use graphic files in their design and those files are not scaleable when the page width is increased. Sometimes those themes can be modified but not without a log of work and knowledge of CSS and how iWeb works internally. Wyodor or Cyclosaurus often can suggest a workaround.
The themes that do let you widen the page and customize any way you want are White, Black, Modern Frame and Formal (except for its blog layout).
I use one of those themes, choosing the one whose navbar font and color will fit my design best, and then add my own shapes and graphics which I have complete control over.
It's either that or use the set themes at their default size.
OT -
When receiving or making a call ,the other side is not hearing me . all other function is OK.How can i get the phone ok.
Hello,
Thank you for contacting Mozilla.
I understand that you are having problems with placing calls and that the other part is unable to hear you properly. In order to better understand and investigate on the issue that you are encountering, please reply to this message with the following information:
* What is the OS version found in the Device Information page? Please visit [http://mzl.la/Gzz6Kp this link] if you need help finding the Build ID of your phone.
* Please provide the exact steps to reprodcuce the issue you are encountering.
* Who is your current cell phone carrier?
* How often do you encounter this issue?
Please be sure to include as much detail as possible, including any websites that may exhibit this issue, and any error messages that you may be receiving, exactly as they appear. This will ensure that we will have all the information needed to investigate into this. Thank you for your help and we look forward to hearing from you! -
When I open browser I can not see full pages,on the left side have blank segment?
The full window of the browser(firefox 6) is not fit to my monitor,I can not see all web pages(right side)
I can send screen shot!Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
This issue can be caused by the Babylon Toolbar extension
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes -
How do you extend the frame from one side but not the whole thing?
I am updating my blog and want to put a rectangle picture into the pre-set frame. I need to stretch it horizontally but the entire frame (i.e., both sides and top/bottom) stretched instead. How do you extend the frame from one side but not the whole thing?
In Inspector, select the Graphic Inspector. Choose, from the Fill options, Image Fill. Select the image from the dropdown and click Open. Now go back to Inspector and click on Scale to Fit. Choose from the options in the window. There are a number of them which should address your problem:
With the Blog template, you will probably need to insert a text box over the stock placement frame and work with that instead.
Mark -
I want to make a video clip using two still pictures, placing side by side. I am able to make with only one at a time. Also, I am able to move the picture using Transform. But unsuccessfull in making with two stills in same clip. Thank you for reply.
If you want a Picture in Picture effect, stack one still on top of the other with a connect edit. Use Transform to scale and reposition the top image.
Russ -
JSPM phase error : admin/user/SID does not exist
Hi ,
There is an error message while opening the JSPM
Phase error report:
"cannot read secure store properties .could not set up secure store.property admin/user/SID does not exist.msg.util.dyn.0003.com.sap.security.core.server.secstore.secstoreFS get string value
com.sap.security.core.server.secstore.secstoreFS.Not found exception could not find a record key "admin/user/SID" in the store com.sap.security.core.server.secstore.secstorefs"
checked the config tool secure store and found no entry maintained for /admin/user/SID.
How to add the new entry in config tool and what is post entry procedure
Thanks a tonHello Daniel,
You can maintain the Administrator user in secure storage using the config tool.
By default, the value for this config tool property is user Administrator. However, when using the ABAP Engine for persistency, this user is J2EE_ADMIN.
Following are the steps:
1. Start the Config Tool.
2. Select secure store.
The configuration for the secure storage in the file system appears.
3. Select the key admin/user/<SID>.
4. Enter J2EE_ADMIN in the Value: field and choose Add.
5. Select the key admin/password/<SID>.
6. Enter the password for J2EE_ADMIN in the Value: field and choose Add.
7. Save the configuration.
The corresponding link is mentioned below:
http://help.sap.com/saphelp_nw04/helpdata/en/ae/b7ceff3e40fd42be3a6503236f9746/content.htm -
Server side function not get called after dispatching cairngorm event second time on same page
Hi All,
I am facing a urgent issue regarding cairngorm event. Actually my page contain 3 button add,delete,save
and clicking of any button I do the respected functionality. For ex:
I click the add button & on clicking of add button I fire a cairngorm evnt & after getting response from server side that the record is added
I displayed a message that the record is added & update the data source.
After addition of the record , with out going to other page if I perform the same functionaly(Like adding another record) on same page the cairngorm
event not call the server side function - after debugging I find out that cairngorm event reach to the corresponding excutecommand function & called that function but it is not calling my server side function & I also din't get any error message .
I dont know why the server side function not get called?. similarly if I try for delete or update case the same things happend. Only for the first time it works properly but not for the second time.
Could any of you please tell me why the cairngorm event not calling the server side function.
Thank you for your kind assistance.
Regards,
UjjwalOkay, well I think I've worked out the problem.
In ASP.NET we would typically bind repeating controls such as DataLists and Repeaters manually using <i>Control</i>.DataBind(), because we're usually using a separate class library containing collections for our objects. Seems the SAP Table control doesn't like this approach.
I changed the code so that the databinding is specified on the control, and call the Page's DataBind() method and it all worked fine.
One tip: because the collection I used to bind to is in a separate class library, I receieved a <i>BC306523: Reference required to assembly MyAssemblyName...</i> message, even though I had a reference to the assembly in my project and the DLL is being properly deployed. To fix this, you must include the following directive at the top of the component's ASCX file:
<%@ Assembly Name="AssemblyName" %> -
Right side Text not printing in Dot Matrix Print
Hi Gurus,
When i take print of the smartform with Laser Jet Printer its comming fine , but when i print using Dot Matrix Printer the text at right side is not printing.
Printer model : Epson DFX-5000+
Can any one tell me how to resolve this..
Thanks
Ganeshhi ,
SAPWIN Drivers which support those Epson printers check in SAP (windows support )
These will solve your Problem .
Regards
Deepak. -
My 3gs screen slides side to side but not up and down
my iphone 3gs screen works sliding it side to side but not up and down. i dropped it a few days ago and it stopped working
You're talking about scrolling the screen, right?
Do the basic troubleshooting steps described in the User Guide - Restart, Reset, Restore from backup, Restore as new.
If Restoring as new doesn't help, there was hardware damage which can't be fixed by software methods. -
My iPhone no longer rings when someone calls and I have no txt tone either. The button on the side is not on silent
Sounds like it either believes that there are headphones plugged in, or the switch is broken.
Why in the world would you take it to Best Buy for service? Take it to an Apple Store. They can replace it on the spot if it's defective. -
Dear All,
I would be grateful, if you could please help me to know the steps that should be carried out when i see a SID could not be found error. I tried searching the forum, i was able to find only for the global settings issue.
Please let me know the process of fixing the issue step by step.
Thanks in Advance.
Regards,
SyedHi,
i think this related to DSO ,some error during activation of request.
CHECK out
DSO Activation Failed - No SID found
No SID found for Characteristic
in some cases error also occur due to invalid char in DSO cahr values so correct them in PSA only after deleting req from DSO.
THANKS
Edited by: npathak on Aug 16, 2010 4:35 PM -
Error: A user with the specified SID could not be found in the domain.
Hi All,
I am getting a error as below,
A user with the specified SID could not be found in the domain.
Check the spelling of the account name 'domain\usersAMAccountName' and try again.
- at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(String strAccountName, SID_NAME_USE[] IntendedAccountType, SID_NAME_USE& sidUse)
at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(String strAccountName)
at Microsoft.Office.Server.UserProfiles.UserProfileGlobal.GetSidFromAccount(UserProfileApplicationProxy proxy, Guid partitionID, String strAccountName, Boolean isWindowsAccount)
at Microsoft.Office.Server.UserProfiles.UserProfile.set_SID()
at Microsoft.Office.Server.UserProfiles.UserProfile..ctor(UserProfileManager objManager, String strAccountName, String strPreferredName)
at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateUserProfile(String strAccountName, String strPreferredName)
at Microsoft.Office.Server.UserProfiles.UserProfileManager.CreateUserProfile(String strAccountName)
Any help?
Thanks,
MohakkHi,
Per my understanding, the code should be OK, I have two suggestions as below:
1. Please ensure that the account of that user is valid in your production environment;
2. Try other accounts in the CreateUserProfile() funciton to see if it can work.
Feel free to reply if there any progress.
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
I am super frustrated with Safari in ios 7. I do not have the pages icon on the bottom right of Safari ios 7. When I press the plus sign at the top right I see 'private' on the bottom left side but there are no buttons on the bottom right at all. I am trying to get Safari to have the tab Rolodex look of the tabbed windows. So I can see the pages. Hope this is making sense. Why am I not seeing the pages button on the bottom right of Safari?
Thanks!Bummer! Hopefully this will change in the future. At least I know now that I am not crazy for not seeing the pages icon! Thanks so much :)
Maybe you are looking for
-
On a Mac, in Adobe Photoshop CC 2014, when adding audio to an edit, i get the message "Could not complete your request, because Dynamiclink is not available". When performing the exact same operation in Adobe Photoshop CC, i can add audio in the same
-
Finding text on web pages in Safari on iOS
A big drawback to using Safari on iOS is the inability to use a Find option to locate text on an open web page. If I'm reading a long article in Wikipedia, or any page with a lot of information on it, and I need to see specific text in the context of
-
Why is FF not able to display an encrypted PDF correctly (usind pdf.js)?
After entering the password, only a white page appears - instead of the text. Here are the details: File: www.phirents.net/trans.pdf Password: ELXRTQWS Can anyone assist me? I'm quite desperate. Great thanks!
-
Podcast art not showing up in iTunes
Hey Guys, I recently startd a music podcast using blogger / feedburner. It was approved and is appearing in iTunes, but the artwork is not showing in the store. I had originally used a 1400x1400 png image per apple's instructions, but just switched
-
Dear Sir, I have a pair of 11501, which load balance two SSL server behind them. The cert is stored in SSL server(10.106.13.20 & 21). The external vip is 10.106.13.224. I read the SSL Config Gide and made the below configuration. Can you check if my