IVR Gateway is receiving "False Calls"

We are implementing a IVR system across our network, and have over 30 sites converted and in Production. One office is giving us problems in the fact that after they close for the day, their IVR gateway starts receiving calls that appear to have a real caller behind them. Every couple seconds, the IVR will pick up a call, start running through it's default script, and treat the call as a "Rotary Phone Transfer" when it doesn't receive any response from the caller. Logs state that we receive over 5000 of these "Rotary Phone Transfer" calls for this one office between 5:00 pm & 8:00 am every night.
I need help with how to figure out if our IVR is the source of the problem or their PBX.
Cisco CallManager - 4.0
Cisco Application Admin. - 3.5(2)

The most common problems with IVR include:
The application is not properly configured on the plain old telephone service (POTS) dial-peer.
Make sure that the incoming Telephony call matches the POTS dial-peer with the application. The POTS dial-peer matches the first dial-peer with the matching port command in the configuration or if the called number matches the dial-peer subcommand incoming called-number .
Check that the application actually exists through the show call application voice summary command. Make sure that the application name does not contain a syntax error.
Make sure that direct-inward-dial is not configured on the dial-peer pots.
Ensure that the proper audio files are loaded into Flash.
Ensure that the authentication with username and password is properly configured.
This URL should help you:
http://www.cisco.com/en/US/tech/tk1077/technologies_configuration_example09186a0080094305.shtml

Similar Messages

One agent not receiving the calls in UCCX7.0

Dear All,
Greetings!!
We have UCCX 7.0(1)SR05_Build504 and call manager UCCM System version: 7.1.5.30000-1.
- We have many team with basic IVR options for customers, one of the Team called "customer service". The customer service team have 6 to 8 agents. All have same CSS, partition, CSQ, Resource Groups and Team mapping.
- The issue is, only one agent not able to receive the calls in the team. The user is properly configured in CSQ also the resource group and team configuration is fine. we have compared with working user and found all config is fine.
- The user is logged in properly and always in ready state in CAD, but no call routed this agent and no error message observed on the agent side.
- The user extension is 5154 and the user configured on call manager is Dennis. Fonseca. The UCCX Resource name also showing properly.
- I have collected the MIVR logs and i can see the extension 5154 and agent name. The calls are routing. am not have much idea about MIVR log analzis, so icouldn't find the exact issue.
- Please find the MIVR logs and help me to understand the issue or why the calls are not routing to this agent even logged and ready mode???
Working user name is -
5158 - Gabriela.Quesada
Non-working user name is -
5154 - Dennis.Fonseca
MIVR Logs attached.
Thanks & Regards,
Naveen.S

Hi All,
Thanks a lot your advise on this... the issue has been fixed after restarting the CRS engine..
53278074: Jan 13 09:42:23.568 GMT-600 %MIVR-SS_CM-7-UNK:returning null from ContactMgr.offerResource(Dennis.Fonseca) because esds.size() is 0
Basically, the UCCX Engine is not allocating the Agent (Dennis.Fonseca) to the Queue and that is the reason why is not receiving any calls even the Agent is “Ready”
Thanks & Regards,
Naveen.S

IVR sample scripts that routes calls base on States?

Does anyone have a sample IVR script which can route calls to different queues base on the States or ZIP code enter by the user?
Thanks.

Yes, I read this document.
I've created ccm group, sccp local interface, dspfarm profile, and registered it to telephony-service. It's ok.
Yes, IVR still be availible under SRST, it runs as vxml script on router flash.
I configured router for inbound/outbound calls in g711a, and it works fine. But when using IVR with .wav file in g711u codec I've got a problem. I decided to use translation-profile on incoming dial-peer, from incoming number to internal IVR number, but it doesn't work.
I attached config of xcoder, dial-peers and translation rules.
In normal mode (without IVR) I receive calls in dial-peer voice 30804242 voip and after it translate them to dial-peers 1 or 2 to CUCM phones.

Cannot receive VoIP calls on my 3102

i got a new 3102 a few days ago. set up went well. i can make voip and pstn call outwards and i can receive pstn calls. i even managed to set up the pstn to voip gateway.
however i cannot receive calls via VoIP. the receiving phone rings but when i answer it, i get nothing. from the calling side, you don't get the normal "ring ring", just a tone.
it's behind a netopia ADSL modem that has IP passthrough/DMZ set up on it. the 3102 shows the public IP address assigned by my ISP. so i assume that totally bypasses NAT and i thus don't have to worry about port forwarding etc. I don't have STUN or NAT on.
i have tried registering with different VoIP providers such as FWD, SipPhone, and VoipTalk and the symptoms are identical for all.
does anyone have any idea of what's going on here? thanks in advance.
robert

i don't know but it still looks like a NAt problem to me ( unless of course there's really something wrong with your SPA3102 )... why don't you forward the ports needed on your ADSL modem and enable NAT on the SPA3102? another thing that you can do is to try the SPA in another location that has a regular cable or DSL modem ....

Skype call or false call???

I received a auto call today saying my system needed upgrading etc. and to go to a specific web site. When I received the call, it said to be from " Notification TM, urgent online instruction" Name of the user seem to be: s.repair.urgent.fix.1
Is this false, or skype?
Regards,
RubyWax
Solved!
Go to Solution.

RubyWax wrote:
Is this false, or skype?
FROM MODERATOR
This is a well known SCAM. We NEVER contact customer in this way.
Please ignore, block the caller and delete from your system.
Thank you.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

I am facing issue in Receiving incoming calls, Name not getting displayed though the same has been saved in my phone book!! I have done sync from Windows contacts.. please help if some1 knows how to rectify the issue...

Has your carrier been having issues with Call Display? Do the telephone numbers come up when people call, or does it just show 'Unknown Number' or 'Blocked' ?

IPhone 5s is not receiving incoming calls

Hi everyone,
I am having problems with receiving incoming calls after I got the 5s. Sometimes, it didn't even ring, just went straight to voice mail even though the signal was strong. Sometimes they have to call me up to 8 - 10 times for the phone to ring once and the other calls will appear as missed calls. Does anyone experience the same problem with the 5s? Should I bring it to the apple store for them to take a look?
Thanks

Double check settings - do not disturb - off

Iphone 5s cannot call out any calls, but still can receive incoming calls and sms

Hi
anyone experiencing this problem? After buying iphone 5s less than 2 months which I never did in the past, I could no longer make any phone calls out, yet i still can receive incoming calls and data.
Could someone kindly assist in this?

Contact your carrier. Phone functions are a carrier responsibility. Have them check your account. Are you seeing any error messages?

Why does my iPhone 5s not receive incoming calls

My iPhone 5s does not ring when receiving incoming calls yet I have signal, do not disturb is off and I receive texts or voicemails notifying me of a missed call which I can return immediately. What is going on? How can I fix this?

Yes the ringtone works. I know you are trying to help however I am fairly tech savvy and have eliminated all basic user defined settings that could cause the issue. The issue is not that there is no sound the issue is that there is no call incoming notification at all. The call does not connect to my Boone to even make it ring and display as a missed call

Iphone doesnt receive incoming calls

Hi, for about 2 weeks i cannot receive incoming phone calls any more. Earlier it worked without problems. Now even in the phone log, no incoming calls are registered. I can make phone calls by myself, i can receive incoming calls by facetime, but no phone calls or sms. The phone is not muted (i tried the button already) . A complete reset of the phone did not change anything. Has anybody an idea what i can do?

My carrier did not know a solution, but proposed to send the iphone back to apple.
I removed all photos and videos. Just before i wanted to send it back, it suddenly worked again.
Now i wonder how long it will work. After all it seems like a software problem to me.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

Hello SamSax
Check out the assist page below for troubleshooting call connectivity.
Calls and connection issues
http://www.apple.com/support/iphone/assistant/calls/
Thanks for using Apple Support Communities.
Regards,
-Norm G.

IPhone 4 Can't receive incoming calls and sms after 3G has been activated

I can't receive incoming calls and sms on my iPhone 4 after the 3G connection has been activated and used actively by me. Outgoing calls and messages do work and as long as I use the Wi-Fi connection everything's fine but the problem appears after switching to 3G. Any help? Thx in advance!

I think the next step is to do a reset by holding the sleep and home buttons down at the same time until the Apple logo appears. If you haven't done this before, keep holding the buttons when the turn off slider appears. The screen will go black and after what seems like an eternity, actually several seconds, the Apple logo will appear. When the logo appears, release the buttons.

I got problem when trying to contact my iphone 4 using facetime,it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

i got problem when trying to call my iphone 4 using facetime with my Macbook Pro 13',it did ringing,but my iphone 4 did not receive that call as if nothing happen.But,when the call ended,that call appeared in the missed call list.fyi both are connected to internet.Help!! thank you in advance

I cannot receive phone calls or messages when iPhone screen is locked

Hello,
i have an iPhone 5.
i Am unable to receive phone calls or text messages when my screen is locked. When I unlock the screen the missed call doesn't even appear so I have no idea anyone has called me. Text messages come through at about 12:30am every night.
i Have tried EVERYTHING I could find in forums and Apple trouble shooting. This is my last resort other than sending it to Apple.
iit is as if "do not disturb" is stuck on, but it isn't.
i Have tried:
changing all all do not disturb settings.
checked call forwarding etc.
checked mute
my silent button is not on.
i have reset every setting and then even reset the phone and manually transferred everything back onto it rather than restore It from previous back ups.
oout it in recovery mode.
i Have no success with any.
the weird part is when I first lock the screen and try to call it, it does ring. But if I give it a minute or more it won't ring.
does anyone have any ideas or anything that may help?
PLease, please, please

I Have also checked blocked numbers and swapped SIM cards from a completely different carrier so it's not the carrier either

MacBookPro Cannot Make/Receive Phone Calls

Hello,
My MacBookPro (early 2013 Retina) cannot make or receive phone calls. I'm on the same wifi network, my bluetooth is on, I can send/receive texts and SMS, I have the most recent software upgrades, but I can't make calls. As of right now when I try it says "Your iPhone and Mac must be on the same Wi-Fi network".
The same thing is happening with my iPad.
In FaceTime under "iPhone Cellular Calls" I've tried to move the slider over to the right to allow calls on MacBookPro and iPad, but it says "Cannot Turn on iPhone Cellular Calls- FaceTime and iCloud must be signed in to same Apple ID to use iPhone Cellular Calls". THEY ALL ARE ON THE SAME APPLE ID!!!
IT MAKES NO SENSE!!!
I am actually having issues with handoff JUST on my MacBookPro if that is any sort of useful information. It works just fine on iPhone and iPad.
BB

Hello Bluebuck,
The article linked below details a number of troubleshooting steps that can help get Continuity working correctly.
Get help using Continuity with iOS 8 and OS X Yosemite
http://support.apple.com/en-us/TS5458
Cheers,
Allen

IVR Gateway is receiving "False Calls"

Similar Messages

Maybe you are looking for