IW32 After business closer operation status not showing CLSD

Dear Friends,
I have a query here. For PM orders system status gets updated as per business transaction. Operation status also gets changed as per header status. But it is okay till technical completion and operation staus gets set as TECO. But after business closer of the order still operation showes TECO status in place of CLSD .
Any clues on this please? Is this the standard feature or I need to search for OSS notes to be applied?
Regards,
Siddhartho Raha

Hi,
That note is no longer released so you cannot see it.
Note 675240 contains an alternative repair report, at end of page 13 you can see similar update following the comment:
*    begin of TECO / CLSD handling
the following section does the update:
IF update = 'X'.
* create an entry in jest that the operations are TECO
   CLEAR wa_jest.
   wa_jest-objnr = <wa_jest_ov>-objnr.
wa_jest-stat = 'I0045'.
-Paul

Similar Messages

I re-formatted my pc and changed its name and user name. But after formatting firefox sync is not showing my previous bookmarks.

Hi guys i Formatted my pc and after formatting now firefox is not showing my previous bookmarks
I changed my computer name and user name
and i dont remember what was previous name of my computer

Did you reset the password of the Firefox account or did you still remember the password?
The new Sync version used in Firefox 29 and later still uses a Sync key to encrypt data locally before uploading, but this Sync key is generated internally from the password of your Firefox account, so you no longer need to worry about it.
This also means that the Sync key changes when you change (reset) the password of the Firefxo account and you lose all data stored on the Sync server when doing that.

Re: Gamer's Club Unlocked Status not showing up online

I am having a similar issue. I did mine through the mail and I went to the store and they scanned my card and did it to where it didn't charge me the $30 in store. I went to my account to check my status the last two days to see if my status changed to the unlock and it hasnt, games I go through checkout to pre-order don't show the 20% off.

Hi there skiumah85,
The Gamers Club Unlocked membership offers and abundance of awesome benefits, and I don’t know of anyone who isn’t satisfied with the benefits once they get to use it. We’ve done our best to take the feedback we’ve been provided by our customers to make the activation process for the online cards as easy as possible. At this point, it should be ridiculously simple, which makes it even more frustrating to hear that you had trouble and I am sorry for any inconvenience that this may have caused you.
Sadly, we do not have a way to activate these remotely. At this time, I would encourage you to return to the store with your card so that we may properly activate your card. If you continue to have trouble with activation after this visit, please do not hesitate to reach out to us!
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Business catalyst site is not showing up on web searches

I built my site in Muse and published directly from Muse onto Adobe Business Catalyst. It has been a couple of months and this site is not showing up on web searches. I believe it has something to do with my Business Catalyst settings. Frustration has set in and I'm turning to this commuity to seek direction. The site is edgeadvertising.ca
Should I be looking at Googles webmaster tools?

Hi edgydoug1,
You have a challenging case since "Edge Advertising" appears to be a common business name with many other established websites for "Edge Advertising" or "Cutting Edge Advertising" businesses around the world.
First, I'm going to contradict Gaurav. I may be interpreting what I see on Google incorrectly, but it looks to me as though Google has indexed your site. It's a one page site. Correct?
A few things you'll want to do to improve the chances searchers will find your site:
1) Set the Page Title for your page in the Page Properties dialog. I recommend setting it to your business name. You might consider including Winnepeg in the page title, since that will increase the odds that someone looking for "Edge Advertising" in your area will find you, rather than the Edge Advertising in Washington, D.C., Tampa Bay, Fairport, NY, Houston Texas, etc.
2) You might consider putting your contact information where your copyright currently is.
3) Enter keywords for your page in the Page Properties dialog Metadata panel. Be sure to include Winnepeg and Manitoba (spelled out), along with your business name and the services you provide.
4) Pay special attention to where you apply h1, h2, h3 tags via paragraph styles. You should probably make the main "Edge Advertising" title the h1 for the page.
There are two primary factors to SEO, indexing and page ranking.
Indexing is about making sure your pages have content that corresponds to what your prospective customer will be searching for. This generally means choosing ~3 search phrases and doing what you can to be sure those phrases and the words in those phrases are used in your site. Your site has quite a bit of live text content, so you're probably doing well but you'll want to think about search phrases and see how well they correspond to words and phrases in your content.
With a single page site you're limited to a single page title and no filename for the HTML file (since it will be index.html), so you'll want to make sure the page title is good and you make good use of h1, h2, h3 tags. You may also want to add alt tags to your images (if you haven't already). And keywords in your metadata.
Page ranking is largely about the number of other sources (websites, twitter, facebook, blogs, etc.) that contain links into your site. If lots of other sites are referring to your site, your page ranking will be higher relative to other sites with similar page content.
Again, given the business name is not unique and many of the other businesses with the same name are likely to offer the same services, it's going to be difficult to differentiate your site to web searchers. You'll want to make sure the geographic location of your business is prominent along with the principals and anything else that may be unique to your business (that also known to web surfers).
Finally, when you make a change to your site, if you submit your sitemap.xml file to Google using Webmaster Tools it theoretically will encourage Google to re-index your site sooner, though there's no guarantees how long it will take.

After effects color corrected clip not showing correctly in Premiere

Hello all,
I have recently made a short film with a few effects in Premiere and After effects CS4. I have used the Dynamic Link to accomplish this. I have added color correction with Color Finesse in After effects. The problem is I some of the color correction is not showing up in Premiere once it has finished. Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well. I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
Is anyone else haveing this problem?
Do you think it's something wrong that an update will fix?
Maybe a new codec?

Describe the exect DL steps you took.

6.1 NPD - Project Name and Status not showing in the Project Header

I have this issue in 6.1 NPD - The NPD Project Name and Status is not showing in the Project header when opening a project. Any ideas? Thank you.

Is this happening for NPD Projects that are newly created, prior to clicking Save? Or for already existing NPD projects?

Task Status not Showing Cost Budget

Dear All..
Cost Budget is baselined... but in Project Status Inquiry Screen its not showing... When i click Task Status on PSI screen.
I have run Update and REfresh Project Summary....
What could be the reason.. Please help...
Many thanx.

Hi
check the PA periods and current reporting period.
Regrads

After Effects Rendered Color Correct Not Showing In Premiere

Hello all,
I have recently made a short film with a few effects in Premiere and After effects CS4. I have used the Dynamic Link to accomplish this. I have added color correction with Color Finesse in After effects. The problem is I some of the color correction is not showing up in Premiere once it has finished. Some of them are adjustment layers and some are not and the ones that are showing up are diverse like that as well. I have rendered the footage and rendered the premiere time line, it fixes it at first but won't build a DVD the right way then the fixes just seem to disappear when scrolling through the timeline.
Is anyone else haveing this problem?
Do you think it's something wrong that an update will fix?
Maybe a new codec?

Mylenium is correct, the LE version of Color Finesse included with CS4 is for use in After Effects only. To use Color Finesse inside of Premiere or AME you'll need to upgrade to the full PI version. You can find information on available upgrade paths at http://www.synthetic-ap.com/cfupgrade
And if anyone has the PI version and the color correction is disappearing when rendered by AME, be sure to update to the latest version of Color Finesse. Version 2.1.10 corrected an issue that would cause that symptom.

Novatel MiFi WWAN status not showing up

Hi,
I got the Novatel MiFi running in modem mode using the Novatel drivers. So far so good. But when I click the "Show WWAN Status in Menu Bar" checkbox, nothing happens. Nothing appears in the menu bar. Also the Apply button remains disabled - not sure that's as it should be.
But mainly, the WWAN status never shows in the menu bar.
Does anyone what know what I need to do to make it work? Are there some preferences I could delete? Other ideas?
thanks!

By modem mode, do you mean wired using the USB port? If true, I would not expect it to show up as a wireless WAN connection. It would be a USB attached modem.

IPMP groups status not showing

Hi ALL,
I have 2 V880 nodes with SUN cluster3.1U3. In one node is not showing IPMP Group status.
root@dbserver1 # scstat -i
-- IPMP Groups --
Node Name Group Status Adapter Status
root@dbserver1 #
Please help.
Thanks in advace.

scstat -i should show atleast one IPMP group on running the command. In your output, you are not seeing any IPMP group.
Udate with your ifconfig output.

After reinstalling Lion, iTunes does not show my IMAP mail-accounts in iTunes for sync. How can i fix this?

i did a clean install of Lion. Than i copied my iTunes Library back from a backup. I configured all my email accounts in Mail. Than i wanted to sync my iPhone. I reconnected it to my iTunes Account and everything was correctly synced, but the email accounts. they do not show up in itunes. On the info-tab of the connected iPhone the part for the email-accounts stays empty. iCal and Adressbook are working fine. What the heck is going wrong?
And please don't tell me to configure the email-accounts manually in the iPhone. I know that this is a workaround, but it is not the solution for the problem.
Thanks for helping me out!

http://support.apple.com/kb/TS1538

Business View change does not show in existing Parameter Group

I have an existing report that includes a dynamic, cascading LOV and associated parameter group. The LOV is based on a Business View.
I modified the Business View to limit the available values. (Actually, I modified the Data Foundation and then updated the Business Elements, Business View, and LOV.) I cleared the LOV using the Business View Manager, rescheduled the LOV, and received a message indicating that the refresh was Successful. If I open the report, the old list of values are still displayed.
To test, I created a new report. I used the Enterprise as the data source and selected the Business View used by the LOV and parameter group. If I query the Business View, I only see the rows I expect to see after the change made to the Data Foundation, Business Elements, Business View, .....
How do I force the existing report to use the current LOV?
thanks

Please check whether the following SAP helps:
Business Objects Notes Get Help | Close
   1196364 - Need to refresh List of values (LOV) in the prompt, to be able to see list with all values in InfoView
Language   English     Version   21     Validity: 11.07.2008 - active
Edit Print View Show change log Show Internal Memos Compare Versions
Content:    Summary   |   Header Data   |   Other Properties
Symptom
Refreshing report with prompts, the list of values (LOV) does not appear.
LOV needs to be refreshed for the values to show/appear
Reproducing the Issue
Environment :
BOXI 3.0
Cause
Keep last selected value option is defined in the prompt property.
Resolution
Clear the option Keep last selected value in prompt property.
Save report
Keywords
WebI WebItelligence show prompt refresh Rich Client
Header Data
Released on 17.07.2008 14:42:32 by James Terry (I817754)
Current Release Status Released to Customer
Target Release Status Released to Customer
Responsible Stephanie Adam ( I049611 )
Category Problem
Application Area BOJ-BIP
Product Version BOBJ ENTERPRISE XI 3.0
BOBJ ENTERPRISE XI
Other Properties
Business Objects Article ID 2060972
Business Objects BugID ADAPT00898429
Business Objects BugSystem ADAPT
Business Objects ProductFamilyMajorVersion BusinessObjects Enterprise XI
Web Intelligence XI
Business Objects ProductName BusinessObjects
Web Intelligence
Business Objects ProductMajorVersion Web Intelligence XI
Business Objects BuildVersion 11.5.0.0
Business Objects SupportQueue Design
Business Objects ProductLanguage English

JClient: after INSERT and COMMIT does not show the primary textfield value

1. In my JClient master-detail form: When I insert a new record, enter data, and commit the changes... the master-panel's primarykey textfield is BLANK, when it should show the new auto-incremented number from the MySQL database. I have to close and open the form again to refresh that field again.
2. In order to properly save new records in the detail-panel, I have to insert and save the above master-panel first. Is this the way JCLient handle master-detail forms?
Thanks.

Hi. Thanks for sharing your advice.
Re my problem,
if we have to refresh data by requery,i suggest you should use the way below:
private JUNavigationBar navBar = new JUNavigationBar(true,false,true,false,true);
navBar.setModel(JUNavigationBar.createPanelBinding(panelBinding, navBar));
// after insert ,call this method
navBar.doAction(navBar.BUTTON_EXECUTE);Tried this out but my textfield still won't get refreshed. Here is the code I came up with:
    private JUNavigationBar navBar = new JUNavigationBar() {
            public void doAction(int button) {
                if (button == JUNavigationBar.BUTTON_INSERT) {
                    super.doAction(button);
                    navBar.doAction(navBar.BUTTON_EXECUTE);
                    return;
                super.doAction(button);
        };Re your problem,
I am developing application with JDev + MySQL,encounted another problem,
how can i get the primary key supported by auto_increment column after insert?
i constructed a vo whose sql statement is
select last_insert_id() as last_id to get the value of auto_increment column.
i found it can't get the right value unless commit the transaction.
Would u please tell me your way?Based on what I experienced, we dont have to do the SELECT statement above. MySQL does auto-increment the primarykey but the JClient form just cant show it immediately, unless we close and re-open the form.
What did I do to refresh the primarykey during insert? Please note that I got this solution accidentally coz I'm still a newbie in Java.
A user want to add a record:
1. He presses the Insert button.
2. He enters data into a component (ex. textfield)
3. The component's action-performed event is fired, and the following code is run:
        DCJboDataControl dc = (DCJboDataControl)panelBinding.getDataControl();
        ApplicationModule am = dc.getApplicationModule();
        Transaction tr = am.getTransaction();
        dc.commitTransaction();
        ViewObject vo = am.findViewObject("TblaccountsView1");
        vo.executeQuery();
        vo.last();It simply commits the transaction, goes to last (new) transaction, and lets the user continue his data encoding.
Hope it helps and I hope theres an even better way to do this.

Forms component status not showing 'Up'

10gR2 BI, forms and reports, on Solaris 10. After starting up AS via Application Server Control, the Forms status shows 'Down', yet I can log into our forms app. The status seems to only change to 'Up' after the first login/access. Is this normal behavior? Be nice if all the components that are truly up and available show 'Up'.

This is normal behaviour, since the application only loads after the first login (not on startup).

AirPort status not showing up in menu bar...

I just started up my computer, and looked at the menu bar for the status of my AirPort connection, and found that it's not shown...
Nothing in the troubleshooting manual tells me how to turn it on-- it only tells me that it should always be on.

Try the following ...
o Launch System Preferences
o Show > AirPort
o On the AirPort tab, enable "Show AirPort status in menu bar"

IW32 After business closer operation status not showing CLSD

Similar Messages

Maybe you are looking for