IW32 - Capacity category does not exist or cannot be selected

We are getting the bellow error upon exiting IW32, could you please tell us how to resolve
Capacity category does not exist or cannot be selected
Message no. CY374

Hello Ehsan,
This message also appeared for the first time after we applied EHP5, a note has been released regarding (Message CY374)see SAP note 1547467 for resolution and implement note 1504266 .
regards
Spencer

Similar Messages

Cluvfy returns Path "/tmp/" does not exist and cannot be created on nodes

Hi,
I'm installing Oracle RAC for SAP in AIX 5L.
After run Pre-check for cluster services setup it returns the next message:
Path "/tmp/" does not exist and cannot be created on nodes
This meessage is happening after Checking node reachability and Checking user equivalence phases.
This is my complete log:
pr_bd01/oramedia/clusterware/Disk1/cluvfy/> ./runcluvfy.sh stage -pre crsinst -n pr_bd01,pr_bd02
Performing pre-checks for cluster services setup
Checking node reachability...
Node reachability check passed from node "pr_bd01".
Checking user equivalence...
User equivalence check passed for user "oracle".
ERROR:
Path "/tmp/" does not exist and cannot be created on nodes:
pr_bd01
Verification will proceed with nodes:
pr_bd02
Pre-check for cluster services setup was unsuccessful on all the nodes.
The /tmp is a shared filesystem and oracle user can write and read it
Oracle user id is the same in both nodes
Group dba id is the same in both nodes
Group oinstall id is the same in both nodes
The primary group for Oracle user is oinstall
Where can my problem be ?
Thank you
Edited by: user8114467 on 27/02/2009 07:17 AM

Hi,
Even if this is not resolved from above stuff then do the following
[oracle@node1] ssh node1 date
[oracle@node2] ssh node2 date
Note that it is doing the ssh to itself rather than the remaining node(s). Usually people do forget to do atleast once the ssh to itself.
Talok Khatri

Product category does not exist in logical system

Hello Experts,
Need help in understanding product category change behaviour.
Shopping cart created and approved.
PO created and approved.
Now PO change version created by changing product category.
Please enlighten me whether this change is really allowed on business perspective and SAP perspective.
So far we been told that there is business case to justify this change.
If allowed by SAP, then how do we solve the problem of error occuring in workflow "product category does not exist in logical system XXXX".
Please advise.
Thanks,
Gaurav

Hi
I dont have a system right now to check
1.are you ordering the item from external catalog? ( any mapping between catalog product category to SAP product category )?
2. after approved PO created.
3. Now BUYER could change the product category again?
4. why the BUYER takes push ups for REQUESTER . Let Buyer cancel the PO and ask requester to create a PO.
What is the business process existing in your business ?
Since product category determines purchase group and every thing like gl account etc..
Can you recreate the same issue in development box?
Note 1466155 - GL account not re-determined on change of product categorySymptom
You have an SRM PO with items having multiple account assignment. Go to the PO item overview OR to the item basic data tab and change the product category. However, this does not trigger a new GL account determination for the accounting lines.
Note 1407962 - Category is editable when contract is assigned in PO item
Symptom
When ever a Contract item (Free text or Product Category) is assigned to a Purchase order free text line item, The category modification is not allowed. This is because the product category is always copied from the contract item and overrides the Category for Purchase Order Item. It is confusing for the user as the category is editable and can't be modified.
SAP has different different behaviors . Kindly tell us what type you belongs too...

Subject profile category does not exist CRM_SUBJECT_PROFILE001

I have configured charm in our Dev system.
In transaction solution_manager ->change request management-> create
I get the following message:
Subject profile category does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001
Did I miss something in the configuration?
I configured a test system some time ago and did not have this issue.
Thank you!

Answer found, note 898614

BAPI_SALESORDER_CREATEFROMDAT2 Error "Address category does not exist"

Hello everyone,
I have the following error "Address category does not exist" when executing bapi "BAPI_SALESORDER_CREATEFROMDAT2" from a user application, the error is not constant, meaning sometimes shows and sometimes does not, I´ve been investigatnig regarding this and it seems to be a buffer problem, found SAP Note "1232196 - Inexplicable error in BAPI" and implemented FM "SD_SALES_DOCUMENT_INIT." as solution described, but it's still not working, does anyone faced this problem before that could help me out?
Thanks in advance for your replies.
Regards,
Julio Cesar

Hi julio,
I guess this error occurs due to some pre configuration issue with the value by which your creating the sales order. Have you tried creating sales order with any other value or with just header data.
Regards,
sivaganesh

SP2013: List does not exist / The page you selected contains a list that does not exist. It may have been deleted by another user

There are dozens of entries regarding "
List does not exist / The page you selected
contains a list that does not exist. It may have been deleted by another user" and none of them are really SP 2013 so i thought I would create this entry.
I am getting the error above after creating a simple list with 4 columns. the list is created during a new site definition activation but when I click on my list, I get the error above. the list works if I deactivate the feature and re-activate
it. but has the error whenever the new site definition is created.
Has anybody encountered this issue on SP 2013?

Hi，
For your issue, there are plenty of possible reasons offered when we search this issue online.
Here are similar issue posts, check whether they are helpful:
http://sharepoint.stackexchange.com/questions/98239/list-does-not-exist-error-when-opening-the-views
http://sharepoint2u.com/?p=56https://shareyourpoint.wordpress.com/2012/04/12/list-does-not-exist-the-page-you-selected-contains-a-list-that-does-not-exist-it-may-have-been-deleted-by-another-user-sharepoint-2010-error/
http://spnovice.blogspot.com/2012/10/list-does-not-exist-or-does-it.html
Best Regards,
Lisa Chen
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Lisa Chen
TechNet Community Support

Address category does not exist

Hi All,
I am facing the issue while i am creating a sales order from service order ( Transaction code IW32) , i am getting the warning message sayuing that Address category doew not exist ;Mesage no VP 700.
Kindly help..Its urgent needs to rectify the same as this is business requirement.
Regards,
SK
Edited by: Mastan Shaik on Jul 21, 2011 12:14 PM

Hi mastan
Check this links
SD: Error while reversing post goods issue
hope it will help to you
Regards,
Krishna

Work center category does not exist in CNR1

Hi,
While creating a work center through CNR1, I am getting the error 'Work center category 008 does not exist'. I checked OP40 and the work center category is maintained there. Also the category 0008 has application maintained as Recipes.
Let me know if I am missing anything here.
Thanks & Regards,
Soumya.

Hi,
I feel so. If your using the work centre category for project managment, then, application management will be assigned to N, then you can use CNR1, which is the T code to create work centre in Project management.
In the standard system, Work centre category for project management is 006.
Pl. try creating the work centre through CRC1 for process manufacturing.
Madhava

Subject Profile Category does not exist

Hi,
System: CRM2007
I have created a new subject profile Z* and assigned it to Subject Profile Category Y. When going to the next level (code group profile for Subject Profile), I get the ff. message:
"Subject profile category Y does not exist (system error)
Message no. CRM_SUBJECT_PROFILE001"
Why does it not work?
Thanks
Anke

Hi,
For which scenario are you using the subject profile??
If you are using it for service then please maintain the Subject Profile Category as "A-Service" while defining the subject profile.
Regards,
PePe

Boot image does not exist and cannot read disk label errors.

Hi - I'm having a problem with installing Solaris 9 4/04 on a Netra T1. The Netra already has Solaris 7. I need to get this set up as a jumpstart server but it can't find the boot image. I'm using a brand new bonafide installation disk - not a copy. The system won't let me install/upgrade to Solaris 9 either. I get an error stating that disk label can't be read. I've tried swapping out the CDROM but I still get the same errors. Does anyone know what or why this may be happening? (Oh - and another strange thing - like I said the CDs are the original but there doesn't appear to be a cdrom/cdrom0/s0 directory. The directory I see is cdrom/cdrom0/sol_9_404_sparc/Solaris_9/Tools)
ERROR: Install boot image /cdrom/sol_9_404_sparc/Solaris_9/Tools/Boot does not exist
Check that boot image exists, or use [-t] to
specify a valid boot image elsewhere.
and
Excuting last command: boot cdrom [- nowin]
Boot device: /pci@1f,0/pc1@1/ide/cdrom@2:f file and args: [- nowin]
Can't read disk label.
Can't open disk label package
Evaulating: boot cdrom [- nowin]@1/ide@e/cdrom@2:f File and args: [- nowin]
Can't open boot device
I appreciate any help at all - is there anyone out there who can tell me what I may be doing wrong?
Thanks

Hi check that you are booting of the right cd. Make sure it is soalris 9 software 1/2 if that fails then it may well be that your cd is buggered. most likely it is buggered it it cant find the boot image.

ORA-27101: shared memory realm does not exist urgent cannot connect

Hi i can't succeed connectivity test with netmgr
Initializing first test to use userid: scott, password: tiger
Attempting to connect using userid: scott
The test did not succeed.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
There may be an error in the fields entered,
or the server may not be ready for a connection.
Here is what i get from tcpdump:
0x00a0: 5241 2d30 3130 3334 3a20 4f52 4143 4c45 RA-01034:.ORACLE
0x00b0: 206e 6f74 2061 7661 696c 6162 6c65 0a4f .not.available.O
0x00c0: 5241 2d32 3731 3031 3a20 7368 6172 6564 RA-27101:.shared
0x00d0: 206d 656d 6f72 7920 7265 616c 6d20 646f .memory.realm.do
0x00e0: 6573 206e 6f74 2065 7869 7374 0a4c 696e es.not.exist.Lin
0x00f0: 7578 2045 7272 6f72 3a20 323a 204e 6f20 ux.Error:.2:.No.
0x0100: 7375 6368 2066 696c 6520 6f72 2064 6972 such.file.or.dir
0x0110: 6563 746f 7279 0a ectory.
Here an attempt with sqlplus that didn't work
sqlplus scott/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:05:03 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
Another attempt with sqlplus that succeed i dunno why
oracle@debian:~$ sqlplus scott/tiger
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 17:06:02 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL>
Can someone help me to understand what is wrong please?

user499283 wrote:
Well I don't understand exactly what you mean
here is the listener status
SNRCTL for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:24:33
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=debian)(PORT=1521)))
Services Summary...
Service "CHUCKY" has 1 instance(s).
Instance "CHUCKYSON", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:3 refused:0
LOCAL SERVER
Service "chucky.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
Service "chuckyXDB.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: debian, pid: 11725>
(ADDRESS=(PROTOCOL=tcp)(HOST=localhost)(PORT=49930))
Service "chucky_XPT.rss-global.com" has 1 instance(s).
Instance "CHUCKY", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0 state:ready
LOCAL SERVER
The command completed successfully
I dont know if it is a good thing i copy an init.ora file to initCHUCKY.ora and now database is using it I have just changed some values in it like control files dbname ... that were pointing to another database maybe this is why i dont manage to get this database runing.
Now i am stucked I dunno what to do
racle@debian:~$ tnsping chucky
TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 29-MAR-2006 18:27:45
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = debian)(PORT = 1521))) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = CHUCKY)) (HS = OK))
OK (0 msec)
I am so new to it as i understand the listener is working if i beliave what reports tnsping
As I understand the database is started
SQL> startup
ORACLE instance started.
Total System Global Area 167772160 bytes
Fixed Size 1218316 bytes
Variable Size 62916852 bytes
Database Buffers 100663296 bytes
Redo Buffers 2973696 bytes
Database mounted.
Database opened.
As Inunderstand it is listeneing on 1521
netstat -anp | grep 1521
tcp 0 0 0.0.0.0:1521 0.0.0.0:* LISTEN 11762/tnslsnr
tcp 0 0 127.0.0.1:46370 127.0.0.1:1521 ESTABLISHED11703/ora_pmon_CHUC
tcp 0 0 127.0.0.1:1521 127.0.0.1:46370 ESTABLISHED11762/tnslsnr
unix 2 [ ] DGRAM 43990 11521/su
I made a tcpdump i saw the data is comong on localhost port 1521
Synthese I think the listener is runing, the database too, it is making a listen on 1521 port , when I try to connect data arrives on the right interface.
But I can't login by
sqlplus scott/tiger@CHUCKY
qlplus SCOTT/tiger@CHUCKY
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Mar 29 18:32:49 2006
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux Error: 2: No such file or directory
I dunno what is this fuckin shared memoryThis fuckin shared memory is how oracle does interprocess communication. When you connect to Oracle, you have to connect to this area. If you tell it the wrong area, it won't find it. You can see the areas with the ipcs command on the server. Since you can connect locally, but can't connect remotely, there is something wrong with how you told Oracle to connect remotely. Remotely can be on the same host if you have an @ in the connect string.
>
env | grep ORACLE
ORACLE_SID=CHUCKY
ORACLE_BASE=/home/oracle
ORACLE_HOME=/home/oracle/u01/app/oracle/oracle/product/10.2.0/db_1/
seems like my variables are good.
Well I dunno what to do I didn't think getting a simple login locally over tcp/ip would be so difficult, I am afraid of what will happen after this will work :) As it should be one of the easiest things on oracle what about the hardest :)Well, first try removing the trailing slash from ORACLE_HOME everywhere, including if you have it in the listener.ora. Then compare the tnsnames.ora ORACLE_HOME with your environment ORACLE_HOME. In fact, if you have a listener.ora, try renaming it to something else and restarting the listener.
That error is normally due to a bad ORACLE_HOME or ORACLE_SID. Since your tnsping works, that indicates the ORACLE_HOME is good. But all that tells you is that the listener responds. Other causes may be inadequate processes in init.ora or case issues with the sid, or just generally not following the installation instructions. But are there installation instructions for debian?
With multiple databases on one host, some kernel parameters may need to be increased.

G/L account does not exist but cannot create G/L account.

Hi Guys
i got this error which says G/L account NO. 121000 does not exist in the chart of accounts INT, but when i tried to create the G/L account in FS00, the system says ths G/L account exists in company code PS01.this company code PS01 has the chart of accounts INT. suggestions are welcome.
Thanks and Regards
Vignesh

Hi,
interesting... the message means GL account is not created in chart of accounts INT (FSP0) but if its availabe in another comp. code with the same chart of accouns it MUST be created in INT. Try to create it for your particular company code (FSS0).
T-Code FS00 covers both views.
Best regards, Christian

Active Directory does not exist or cannot be contacted

Hi: We have a server 2008R2 x64 bit. The DC is an server 2008sp2. Single domain.local On trying to install Exchange 2010 we get a series of errors:
1. AD doesn't exist or cannot be contacted
2. must be a member of organization Management role or enterprise admins
3. The credential for machine|Administrator is not on bind
4. The user is not logged on to a windows domain.
DCDiag >> no errors. Have read through a lot of posts with these errros but most apply to server 2003 where there were tools used not available in 2008. Help is greatly appreciated. Chris

Hello Chris,
Are you installing Exchange 2010 on the same server that is a domain controller? if this is a different member server, please post the complete ipconfig /all
Make sure the domain controller is a global catalog server
make sure DNS is functioning well dcdiag /test:dns
You donot need to manually add admin to all these groups as exhange 2010 will do this automatically as long as the account you are using is and administrator and a member of the schema/enterprise admins group
Isaac Oben MCITP:EA, MCSE

Table or view does not exists error while executing select statement

Hi,
I am new to Oracle. I am getting a error while executing the select statement if i give table name without double quotes.
Ex: Select * from Customer;
But working fine when the table name is enclosed within a double quotes.
Ex: Select * from "Customer";
Is there any way to execute the select statement without the double quotes?
Actually I am using NHibernate objects for data access.
Thanks,
Sai

Actually I am using NHibernate objects for data access.And probably that's the problem:
SQL> select * from mytab;
         A
         1
SQL> select * from mYtAb;
         A
         1
SQL> select * from MYTAB;
         A
         1
SQL> select * from MYTAb;
         A
         1Oracle statements are case insensitive and doesn't require double quotes unless the object names are reserved words.
As wrote by others if table is created using double quotes it's name bacomes case-sensitive... and this could be the problem...
Max
[My Italian Oracle blog|http://oracleitalia.wordpress.com/2010/02/05/gestione-degli-errori-in-sql-con-log-errors/]
Edited by: Massimo Ruocchio on Feb 5, 2010 7:08 PM
Added last comment..

Lucreate zfs BE dataset does not exist

Hi guys,
I'm trying to upgrade a Solaris 10 full zfs with liveupgrade but unfortunatly after one day search and after re-reading all sunDocs I block on and I cannot create a new BE.
The final objective is to have the server on release 10 10/09 for VDI3.1.1
If someone get an idea would be so great.
tks
Please find here all informations:
SunOS lima 5.10 Generic_142900-02 sun4v sparc SUNW,Sun-Blade-T6340
Solaris 10 10/08 s10s_u6wos_07b SPARC
NAME USED AVAIL REFER MOUNTPOINT
rpool 15.0G 119G 94K none
rpool@install 0 - 94K -
rpool/ROOT 5.83G 119G 18K legacy
rpool/ROOT@install 0 - 18K -
rpool/ROOT/s10s_u6wos_07b 5.83G 113G 5.71G /
rpool/ROOT/s10s_u6wos_07b@install 127M - 5.70G -
rpool/ROOT/s10s_u6wos_07b@sol10_u8 394K - 5.71G -
rpool/ROOT/sol10_u8 0 119G 5.71G /.alt.tmp.b-.7.mnt/
rpool/dump 2.00G 119G 2.00G -
rpool/export 112K 1024M 20K /export
rpool/export@install 16K - 20K -
rpool/export/home 75.5K 1024M 56.5K /export/home
rpool/export/home@install 19K - 31K -
rpool/flar 4.38G 3.62G 4.38G /var/flar
rpool/flar@install 67K - 68K -
rpool/opt 134M 890M 133M /opt
rpool/opt@install 200K - 89.0M -
rpool/tarantella 2.61G 397M 1.11G /opt/SUNWvda
rpool/tarantella@install 491M - 491M -
rpool/tarantella/var 1.02G 397M 1.02G /var/tarantella
Boot Environment Is Active Active Can Copy
Name Complete Now On Reboot Delete Status
old yes yes yes no -
sol10_u8 no no no yes -
The errors :
root@ lima #lucreate -n sol10_u8
Analyzing system configuration.
Comparing source boot environment <old> file systems with the file
system(s) you specified for the new boot environment. Determining which
file systems should be in the new boot environment.
Updating boot environment description database on all BEs.
Updating system configuration files.
Creating configuration for boot environment <sol10_u8>.
Source boot environment is <old>.
Creating boot environment <sol10_u8>.
Cloning file systems from boot environment <old> to create boot environment <sol10_u8>.
Creating snapshot for <rpool/ROOT/s10s_u6wos_07b> on <rpool/ROOT/s10s_u6wos_07b@sol10_u8>.
Creating clone for <rpool/ROOT/s10s_u6wos_07b@sol10_u8> on <rpool/ROOT/sol10_u8>.
Setting canmount=noauto for </> in zone <global> on <rpool/ROOT/sol10_u8>.
ERROR: cannot open ' ': dataset does not exist
ERROR: cannot mount mount point </.alt.tmp.b-.7.mnt/opt> device < >
ERROR: failed to mount file system < > on </.alt.tmp.b-.7.mnt/opt>
ERROR: unmounting partially mounted boot environment file systems
ERROR: cannot mount boot environment by icf file </etc/lu/ICF.2>
ERROR: Unable to mount ABE <sol10_u8>
ERROR: Unable to clone the existing file systems from boot environment <old> to create boot environment <sol10_u8>.
ERROR: Cannot make file systems for boot environment <sol10_u8>.

In fact the /opt were seperated to include this in the / resolve the issue.

IW32 - Capacity category does not exist or cannot be selected

Similar Messages

Maybe you are looking for