IW32 - restriction or validation to accept only internal order from a plant

HI team!!
I´m needing your help
Im working with Tcode IW32 when creating a maintenance order and we got through Goto / Settlement rule we can assign any internal order number.
there is no restriction or validation to accept only internal order numbers from the corresponding plant, this condition may affect other entities
How can I limit it?
Thks & regards "

In configuration, in settlement rule, restrict receiver other than internal order. In case if you want to have internal order as a receiver but restrict only some orders, you can do that using a user exit/badi at save.
example user exit -IWO10009

Similar Messages

  • Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly. I followed all the advice from the Apple community

    Problem: I lost the option to get the sound from external speakers or headphones to upgrade to Lion 10.7.3. It accepts only internal speakers.  I downloaded  Combo directly , without using "Actualización de software". I followed all the advice from the Apple community.  Can I use bluetooth speakers to solve this problem?  My Computer: iMac. 20-inch, Early 2008. Processor 2.4 GHz Intel Core 2 Duo.

    You may need to reset PRAM/NVRAM.
    First, check that the jack is clean. Put some alcohol on a plug and insert it a few times. See if that helps.
    is your output both digital and analog? If digital, is the red laser light visible in the socket? Do not look directly into the socket when checking.
    If all else fails try a PRAM reset:
    Reset your computer’s PRAM
    A small amount of your computer’s memory, called “parameter random-access memory” or PRAM, stores certain settings in a location that Mac OS X can access quickly. The particular settings that are stored depend on your type of Mac and the types of devices connected to it. The settings include your designated startup disk, display resolution, speaker volume, and other information.
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Immediately press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Continue holding the keys down until the computer restarts, and you hear the startup sound for the second time.
    DO NOT HOLD These keys beyond the second startup sound!
    Release the keys.
    Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.

  • Transferring internal orders from R/3 to CRM.

    Hi,
    Can any one tell me about the process of transferring the list of internal orders from R/3 system into CRM system????
    Is there any specific T-code for this operation???
    Please suggest.
    Thanks & regards,
    Rupam.

    Hi Shivani,
    I am not sure whether I understood your question or not. But if you want to use standard MW to exchange the data then you need to do the following.
    I am assuming your R/3 and CRM are connected to each other ( check the same using tr. SM50 and test the connection from one system to other system)
    1> check the queues R3A* & CSA* are registered in transaction SMQR
    2> check the tr. SMQS for your destination system.
    3> check for the site R/3 - OLTP and check for the subscription ALL BUSINESS TRANSACTION (MESG) Subscripition. - > this is for data transfer from CRM to R/3.
    4> define the no. range for transactions and transaction types etc.
    then you can load the object SALESDOCUMENT using the transaction R3AS - put some filter for this adaptor object so that it will bring only those transaction which you want to.
    Reffer to the Best practice guide for further details. you can get this in site help.sap.com.
    Hope this will help.
    Thanks,
    Vikash.

  • Open Internal Orders from legacy system

    Hi,
    Is there a way to bring over open projects (Internal Orders) from legacy system into SAP?, especially the way to bring over legacy cost information collected on such projects.
    Would appreciate any help,
    Ram
    Message was edited by:
            Ram R

    Hi
    As such you cannot do this. You download your Legacy system data to an excel sheet and then upload the PO details into SAP using  an LSMW etc.
    Regards
    Dev

  • Issue services with different Internal Orders within a Plant from one PO?

    Hiii... Please advice me of issuing services through one purchase order (one vendor comes and do the service to different machines of different internal orders in a plant) to different  internal orders within a plant.
    Thanks
    Manoj

    what is the problem?  you can have Multiple Line Items in a PO  (one for each internal Order).
    And within one Line item you can add multiple service lines.

  • Impute revenue to Internal Order from SD

    Hi Experts,
    Is it possible to impute revenues to Internal Order from SD? Is necessary some configuration?
    Thanks in advance.
    José Luis

    If your cost of sales account is not setup as a cost element (which it shouldn't be if you are using cost based COPA), then you will need to created another cost of sale G/L account which does have a cost element and use that account for this transaction.  The G/L account that is selected for cost of sales is based on the movement type selected in the sales transaction and the valuation class assigned to the material.
    The easiest way of having the system find a different G/L account for this is to use a material in the sale transaction with a different valuation class that can be assigned to this new G/L account.  You can use transaction code (FBKP) to assign the G/L account to the correct account modifier for that valuation class.
    If you can't use a different valuation class (because this material is used in other situations as well), then the process is more complicated.  You will need to have the sales transaction find a different movement type for this so that you can assign a different account modifier and G/L account.  You will probably need to work with your S/D consultant to make this work, but I'll take you through some of the steps.
    In the standard system, movement type 601 is usually used to issue the inventory against the delivery and record the cost of goods sold accounting posting.  The trick here is to assign a different movement type to this speicific transaction.  The movement type is assigned to the schedule item category that is assigned to the sales line.  The schedule item category is derived from the item category, so you may need to have your S/D consultant create a new item category, a new schedule item category, and a new movement type for you.  Now that you have a new movment type, you assign a account key and modifier to the movment type.  From there assign the correct G/L account to the account key and modifier for your valuation class.
    thanks,

  • Sql Server 2012 Encrypted Connection Accept only Internal IP

    Hi Friends,
    As we are using sqlserver 2012 is it possible we can configure  Sql Server to Accept  connection only internal ip (local) network as wel encrypted connections only , if possible please let me know how we can A chive this .
    thank you.
    Regards,
    asad

    Hello,
    SQL Server TCP/IP protocol is a common protocol widely used over the Internet. It communicates across interconnected networks of computers that have diverse hardware architectures and various operating systems. Named Pipes is a protocol developed for
    local area networks. In this case, you can configure SQL Server only use Named Pipes protocol via SQL Server Configuration Manager.
    Choosing a Network Protocol:
    http://technet.microsoft.com/en-us/library/ms187892(v=sql.105).aspx
    Regards,
    Elvis Long
    TechNet Community Support

  • How to create rewrite rule to accept only mail pass from antivirus server

    I want to set JES messaging 6.0 to accept only mail that scaned from antivirus server. If clients send direct to messaging server it will forward that mail to antivirus server. After mail was scaned it is sent to messaging server and messaging server accept it.
    How to create rewrite rule for this case?

    Please read this technical note, for setting up such a configuration:
    http://ims.balius.com/downloads/AlternateConversion.pdf
    Please note, this site contains some other very useful information for Messaging Server, but IE browsers are NOT supported. You must use some other browser.

  • No Upload of Internal order from CRM to R3

    Service Confirmations , with header user status "Retun Needed" cannot find Internal Order in R3. Only when re-processed, i/o is found and processed.
    Process
    service engineers create ServConf (ZT11) as follow-up for service orders. In this Service Confirmation the engineer can set the Header User Status, and he can choose for 'Return Needed'. In that case, an extra S10-line is added to the ServiceOrder (the 'return' line), to be closed later during the return visit.
    When a confirmation is closed with the code 'Return Needed', it will be distributed to R3, but R3 cannot find the internal order for this Service Order, although it exists in the system (I checked every single case).
    These confirmations show up on my error-list (as 'Object link not found in CO').
    When I re-process these confirmations, the internal order is found and processing is OK, so It seems like the system is still busy with creating the extra S10-line, and updating the internal order, when the same internal order is needed to process the confirmation.
    Can you check this please, because I have several of these cases per day, and it is keeping us from invoicing these Confirmations.
    Regards,
    JAN.

    Hi,
    Use one of the follwoing FMs as per your requirements:
    CRM_ISA_ORDER_HEADERSTATUS
    CRM_ORDER_CHANGE_STATUS
    CRM_STATUS_MAINTAIN_OW
    STATUS_MAINTAIN
    Kindly reward with points in case helpful
    Sharif

  • Results Analysis Settle Internal Order (from CRM) - No cost element allowed

    In SPRO results analysis configuration to "Define Posting Rules for Settlement to Financial Accounting" I am not allowed to use an account with a cost element.  (Error: I get error KQ 119 G/L account ### cannot be created as a cost element.)
    I configure a G/L account with no cost element.  KO88 Settlement posts to G/L account fine; however, does not post to the internal order because the config mentioned on first line does not allow me to use an account with a cost element. 
    Problem: I am unable to see settlement in KOB1 report because settlement goes to GL Account, but does not post to the internal order.
    Failed solution:  I tried to use OKC9 substitution at KO88 to substitute the internal order number.  The problem is that table AUFKV is empty when the substitution runs at KO88 settlement.  I am not able to substitute the order number because the order number isn't even available in the substitution at internal order settlement.
    I put a break manual break point in program GBTACCOB at the call to the substitution rule I defined.  The breakpoint stops at the substitution when I run KO88 settlement; however, fields are blank. I am unable to do substitution.  I know this works because I have a similar substitution on the same internal order for accounting indicator when doing an MB1A goods issue to an internal order.  The break point stops there and the AUFKV data is available for substitution rule.
    Question:
    Any suggested solutions to to have internal order update into KO88 settlement after KKA1 results analysis would be helpfull.

    It is more of a reporting issue really. 
    The problem is that internal order settlement with settlement profile instead of results analysis does post the settlement to the internal order and does use a cost element.  This is the business process the users currently have.  Our users have a requirement to settle the orders weekly.  This helps them find issues earlier and speeds up the month end close.
    In the past we could use KOB1 and see the current balance of an internal order and see the settlement.  Now that report no longer shows the settlement.  How can I see what has been settled on an order and what hasn't now?

  • Purchase Order can't captured Internal order from Asset Master

    Hi experts,
    I am creating a PO to purchase asset and so using the category Asset. In the asset master, I have defined the Internal Order (investment order) number.
    At the Account Assignment tab, I entered the asset number in the PO and it is supposed to capture the Investment Order number from the asset master to the "Order" field as well. But it was not.
    Can any of the expert here advise? Any configuration is required at the PO level?
    Thank you so much. will assign point for solutions

    Hi
    There is no configuration setting in the Procurement/Purchase for defaulting the
    order number.
    As I know there is no setting to setting available in controlling also
    for calling the urder number thru asset in a PO.
    Order number comes from the default assignment to
    Cost element,Cost center and Order in OKB9 transaction.
    Please contact the controlling before coming to a conclusion.
    Regards
    Rammohan.

  • Transfer of Internal Order from One Company Code to another Compnay Code

    Dear All
    My client has 3 Company Code. say A,B,C out of which one of the company code they are closing.They had internal order in old compnay say B which they are closing. Company B had internal order which was raised for employee advances.
    Client wants to transfer Intenal order from company B to Company A.
    Please suggest.
    Regard's
    Rahul Jain

    You can change the company code in the assignment tab & change the settlement rule accordingly.
    Please note in case of statistical orders, you will not be able to change the default cost center, in case postings have already taken place.
    Regards
    Rakesh Pawaskar

  • I cant import internal order from corrections form in OM responsability

    Hi all,
    Hope you are doing fine...i'm asking for help with an issue im facing these days....
    I have an order which is stuck in the corrections form in OM responsability...i have tried to import it manually, but it has an error which is not letting me import it...
    the error says:
    Error: Unable to locate a valid Sales Tax rate for transaction.
    Ensure that an active Sales Tax rate exists for the Location.
    Does anyone have an idea of how to fix this issue....
    Thanks and regards,

    Hi,
    Set the profile option Tax: Use Tax Vendor to Yes for the Order Management
    Responsibility you're using.
    Regards
    / Shakeel.

  • ABUMN - how to bring "Internal Order" from Asset Master to Asset Account

    Dear All ,
    I have maintained the I/O of the Asset Master . If I did OAYR , the I/O value of the Asset Master could  be brought to Depreciation Account automatically when running AFAB.  But when I run ABUMN (and ABAVN), the system could not bring the I/O of the Asset Master to Asset Account .
    Do you kindly tell me that which config could achieve the my purpose ??
    And if I could do it by any configuration , do you have any suggestion to do that ??
    User Exit ? or others ??
    Many Thanks !
    Ian

    HI,
    You will have to maintain Screen layout in Asset acounting-master data-screen layout-define for asset master data
    here goto time dependent data for the asset class.Make plant as a required entry here & save.
    Regards,
    Saurabh

  • Only one internal order allowed for Cost center/GL combination  -validation

    Dear Friends,
    We are using internal orders for controlling department wise budgets.
    my client wants that he be able to post only through one GL account to one internal order
    that is for Marketing dept,(departments are created as cost centers)
    Canteen exp              internal order 1000
    Entertainment exp     internal order 1001
    Gift exp                     Internal order 1002
    that is when GL account canteen exp is used (for cost center 1000 (marketing)) then internal order 1000 can be used but if entertainment exp is to be booked  internal order 1000 cannot be used. in this case only internal order 1001 should be allowed
    We are using real internal order (settlement will happen at end of month)
    Can you let me know if this is possible in standard SAP or any workaround.
    Regards,

    Hi Sangharsh,
    If internal order must be filled in these GL then you can meet your requirement by creating the validation. To meet this requirement three steps are to be created in one validation. One step is created below to make you create two more steps by your self.
    Create validation under Financial Accounting Line Item using transaction GGB0.
    Step 1.
    Prerequisites. (Go to settings>Expert mode and fill following)
    BSEG-BUKRS = '1000' AND (here instead of 1000 you enter your company code)
    BSEG-HKONT = '450000'      (here instead of 450000 you enter GL for canteen expense)
    Check
    BSEG-AUFNR = '1000'
    Message
    Click on pencil icon and create below message or the message you want.
    Intenal Order 1000 is allowed for canteen expenses.
    Assign this validation to your company code using transaction OB28 with call up point 2.
    Similarly you can create two more steps. Thus your requirement can be met.
    Regards,
    Chintan Joshi.

Maybe you are looking for

  • Knowing when an item value has changed

    Hello If you have a item in a form - :P1_fred which is a database columm fred The database table conrtaining fred columm is read and updated by 1) Automated Row Fetch 2) Automatic Row Processing This works fine I need to add a condition based if the

  • Came home from dinner... MacBook Pro screen no longer working!

    I came home, hit the spacebar to wake up the machine and get back to work. Repeatedly pressed and held the "increase brightness" button, and the "decrease brightness" button too. No change in the completely dark built-in LCD.I held down the start but

  • Might be helpful

    I'm pretty sure that these USB iPods do not work if you're using a wireless USB mouse. My take is that there is not enough power to run both. I am going to try using a powered USB hub concurrently with my USB wireless mouse to see if both can work co

  • How can I use the Greek alphabet in Appleworks?

    I need occasional Greek letters for scientific writing, and I usually use Appleworks 6.2.9 for word processing. I have activated the Greek alphabet through my iMac's Character Palette and can use it TextEdit, but not in Appleworks. Nor can I cut and

  • HTM in use

    Hey guys, I downloaded the windows media player and installed it. I got rid of it but for some reason when i click on secure empty trash it keeps telling me that "HTM is in use" and that it can't perform the operation. Any ideas as to why this is hap