IW37N- Mass Change tool for Operation Personnel No. Field

Hello,
Just wanted to know there was a way to include the Operation Personnel Number as a selection on the Mass Change tool in IW37N. By allowing the Mass Change tool  to assign staff to Multiple WO will reduce the time consuming and tedious work that ours schedulers have to perform. Right now they open each work order and assigning staff then repeating 30-40 times in a day.
Any suggestion will help.
Thanks.

I feel I have not understood your question properly.
If you want Personnel number for operation as selection criteria, in IW37N, under Operation tab, you can find.
Updating the orders with personnel number in single click, I guess right now no option. If you have MRS (Multi resource scheduling), using planning board, you can assign personnel to operations.
Try for IW37.
[Multi Resource Scheduling|http://help.sap.com/saphelp_mrs80sp01_erp/helpdata/en/mrs_index.htm]

Similar Messages

  • Mass Change Function for Standard Templates

    Hi All,
    I am trying to use Mass Change Function to change one field value in my Standard project Definitions as well as Standard WBS Elements but its not doing.Is it that Mass change Function is only aplicable for Operative projects and not for Standard Templates?
    Expecting your response on this.
    Thanks and Regards,
      Harsh Shekhar.

    your observations are correct - mass change functions are only for oprative pojects and not for standard templates
    you can try LSMW

  • Mass change needed for document properties

    Hello Techies,
    My users want to upload large amounts of documents and want they also want to set the properties in bulk and not one by one. I have made some properties for these documents.
    The problem is that the mass change report in the portal is not user friendly enough. They want to select a few documents and set them all to the same properties. Webdav does not support this either, nor does DAV explorer.
    Other suggestions?

    Frederik - there is <a href="https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/9bfc45ba-0b01-0010-4890-da85753f0f58">an article by Martin Hermes about using Excel for property maintenance</a> that outlines one possible custom solution for this. You might find that the Excel sheet as it is delivered fits your needs - you may also find that you need to modify it for your requirements.

  • Mass change in routing - operation details - machine times

    Dear all,
    I want to do mass change in machine times of aprox 20 materials in routing.
    So can anyone guide me for the procedure.
    Thanks.
    Edited by: sapsarang on Aug 19, 2009 1:39 PM

    HI ,
    As suggested by Mervin,better option is record in LSMW for CA02 transaction.
    For creating LSMW ,please refer the link which explain the step by step procedure.
    http://nabiljirani.com/SAP/SAP%20ABAP/SAP%20brain/LSMW_STEPS.doc
    https://wiki.sdn.sap.com/wiki/display/CRM/LearningLSMWStepbyStep!!!
    Hope it helps
    Edited by: Girish  Adaviswamy on Aug 20, 2009 6:59 AM
    Edited by: Girish  Adaviswamy on Aug 20, 2009 7:00 AM

  • Mass Change fuctionality for Delivery Documents

    Hi all,
    I want to carry out a mass change for a field in the delivery document header.
    I know the transaction MASS is not catering for that.
    Is that any other standard  transaction to do a mass change in the delivery document header level, other than do it through a LSMW?
    Appreciate your help on this!
    Best regards,
    Anupa

    hi,
    MASS is not there.
    As per my knowledge
    BAPI_OUTB_DELIVERY_CHANGE - BAPI for Change to Outbound Delivery
    BAPI_INB_DELIVERY_SAVEREPLICA - Create Inbound Delivery
    RV_DELIVERY_CREATE - Create Delivery
    GN_DELIVERY_CREATE - Create an Outbound Delivery
    REGARDS,
    BALAJIA

  • Mass Change of Refrece Operation Set

    Hello.
    I need to change ROS in MASS. I have near around 300 ROS to be change. Is there any transaction for change in Mass. For example for 1 ROS I can chage it through CA12. For Mass change is there any option...
    Thanks in Advance...

    Dear
    1.Check with CA95N or else using CEWB
    2.The best way will be create a BDC to made changes in Routing ,Concern with u r ABAPEr .Try  through BAPI_ROUTING_CHANGE .
    Regards
    JH

  • MM17 Mass Update Tool for Material Master.

    Hi Gurus,
    We have an appended material master field which was earlier added to the material master.
    Now we want to add it as an update field into MM17 Mass Update Tool. But don't know how to do it. Please help.
    Thanks in advance.

    Hi ,
    We are not still able to add that field as 'material updation field' in the field pool. Yes it is a Z field, and the concerned table name is MARC.
    The SAP version is 4.6 C. We tried to find SAP Note and found one 576160. But it may not work. Could you please advice further ?
    We want to add that field into the field pool which appears on clicking the "Select fields" tab.

  • Creating a custom change document for a standard table field

    Hi
    Is it possible to create a change document for a field in a standard table?
    I have searched the forum and only found threads about creating change document to a custom table.
    Will the creation of change documents to a standard SAP table be a modification?
    Thanks.
    Regards
    Sowbhagya.L

    Yes it will be a modification on standard table, but you can always create change document for any field by assigning it to custom change object.
    Regards,
    Krishna.

  • Changing values for EEO Questionnaire Information Fields in E-Recruiting

    We are implementing E-Recruiting 6.0.  I have changed entries for EEO values for Race Category via the IMG SAP E-Recruiting>Recruitment>Applicant Tracking>Questionnaires>Equal Employment Opportunities-->Assign Values to Information Fields.  When I attempt to create an EEO questionnaire using the new values, the old values are retained.  I have been able to determine that when an EEO questionnaire is created entries are created in the T77RCF_MBO_ATTR table linking the values with a VC object, but I haven't been able to figure out if there is a way to clear out/fix the entries in that table.
    Any assistance with this problem would be appreciated.

    Hello Cornelia, Hello Roman,
    first of all: thank you for your very fast reply. I tried to delete the cache as mentioned above and invested some hours in investigation. Your answers gave me some new searchwords and it looks like I found the solution.
    I found note 830251 where SAP said, that there is a difference between old and new way of implementing Corporate Desing to BSP-Applications.
    The old method is the one I mentioned above, but this works only as long as SAP_BW 3.5 SP04 is not in the system. After SAP_BW 3.5 SP04  is used, there is a new way to change the design of BSP-Applications.
    Here is the link to the note:
    https://service.sap.com/sap/support/notes/830251
    I will try it and - for the case somebody else will ever have the same problem - post the results.
    Once again thank you for your great help
    Kind regards
    Michael

  • Mass change Tcode for  status of multiple projects

    Dear All,
    Any SAP Standard t code for mass Status change for multiple Projects
    (like TECO,AALK).
    Thanks.
    Arun

    Hi
    You dont have this option in any STD SAP t.codes, where you can change the status of the projects/WBSE collectively.
    So use this BAPI to Read  the status of Project/WBSE
    BAPI_BUS2001_GET_STATUS   To get both the active system statuses and the user statuses for a project definition
    use this BAPI to Change  the status of Project/WBSE
    BAPI_BUS2001_SET_STATUS
    one system status and one user status  can be revoked each time, and one system status  and one user status  can be set each time for a project definition 
    For Network order status change
    BAPI_BUS2002_SET_STATUS
    Set/Reset Network Status. At the same time, you can revoke one system status and one user status, or set one system status and one user status in a list of activities for the network.
    Thanks
    S.Murali
    Edited by: S. Murali on Jul 24, 2009 3:43 PM

  • Can I use "BAPI_MATERIAL_SAVEDATA"  Mass Change Material for IS Retail

    Hi,
    I have customize program to do mass material changes for IS Retail. Currenlty we are using BAPI_MATERIAL_MAINTAINDATA_RT to do the changes for each selected article and site, it could be 70k combination.
    since BAPI_MATERIAL_MAINTAINDATA_RT cannot handle more than 1 article per execution can I use standard BAPI_MATERIAL_SAVEDATA ?
    Please advise.
    thank You and Best Regards
    Fernand

    Hello,
    Both BAPI's support only one article per execution. BAPI_MATERIAL_MAINTAINDATA_RT is meant for Retail environment whereas BAPI_MATERIAL_SAVEDATA will not update table such as MAW1.  You may call the BAPI in a loop to update multiple articles.
    Thanks,
    Venu

  • Unable to create change order for Operational attributes

    Currently we are in 11.5.10 E9 patchset.
    Product : Advanced Product Catalog
    Unable to find create change order button for any of the operational attributes page.
    Steps to reproduce :
    1.Switch to 'Development Manager' resp
    2.Navigate to 'Item Catalog' > 'Item simple search'
    3. Enter criteria to find an engineering item
    4. Navigate to the item details page.
    5. Select 'Inventory' or 'Manufacturing' or any other page.
    Could not find the create change order button.
    The profile option 'ENG: Engineering Item Change Order Access' is enabled to YES.
    Also, these operational attribute pages are not listed in Change order screen.
    Any pointers on this issue pls.
    Thanks in advance.
    Kumar.

    Dear Friend,
    Please check following config,
    1. Document pricing procedure assignment to ORDER TYPE ( VOV8 under Transaction flow for field Doc.Pric. Proc is
       maintained or not )
    2. Customer Pricing procedure assignment ( In Customer Master data under SALES Tab for Field  Cust.Pric. proc. is mainatined
          or not )
    3. Pricing procedure determination (Sales Area + Document pricing procedure + customer pricing procedure)
    4. Also chcek the condition is maintained for this combination.
    Regards
    AJIT K SINGH

  • Mass changes / updates for the external saprouter

    Hi
    My Client just changed the external saprouter and all access to OSS is now out of date.
    This includes all information stored for my Client on the SAP portal.
    I know that this can be updated manually in all systems, but I am not sure if this can be done on mass via SAP Solution Manager???
    Any suggestions please?
    Thanks!

    Hi,
    It is already in discussin [Mass Update for SMSY Server Routing Information|Mass Update for SMSY Server Routing Information]
    You can try using LSMW.
    Thanks,
    Jansi

  • Activate change pointer for a new screen field in MM42/41

    Hi,
      I created a new screen field for Article master(MM41/42/43) under basic data. If there are changes made to this new field how will the system create a corresponding IDOC? does this have something to do with the change pointer thing?
    Thanks,
    Jeff

    Hi Jeffrey,
    first of all got transaction SALE :
    ALE
    -> Modeeling and Implementing
    -> Master Data Distribution
    -> Replication
    -> Activate Change Pointer generally
    Check if Changepointers are generally on.
    Then goto BD50 and activate change pointers fpr message type.
    Finally goto BD52 and check if your field is "watched".
    After that you can generate idocs from BD21.
    Hope it helps.

  • Open field BSEG-UZAWE on mass change FI document

    Hi Expert
       On transaction code FBL1N - Vendor line item  I need to used mass change icon for input value
    in field  Payment Method Supplement (BSEG-UZAWE) but when I click the mass chang icon  
    the Payment Method Supplement field  not open . How I can open the field open for mass change.
    thank you very much.

    HEllo!
    Some fields are not allowed for mass change in the standard transaction. But there is a consulting
    SAP note explaining how to mass change additional fields. Please, check the solution part of SAP 640908.
    To mass change additional fields in the standard SAP transaction you  can use the explanation given in the note.
    REgards,
    REnan

Maybe you are looking for

  • Call proc from a package

    I had a package with several procedures. Now, the requirement is to include a call to a new standalone procedure not a part of the package. The proc in the package has the cursor and I need to use this data into the proc I called from main, but out o

  • Commenting on a Dynamic form

    I am having a major issue. I own a copy of Acrobat 8 Professional. I have created a dynamic form with fill-in text fields, radio buttons and combo boxes. I need to initiate a shared review to send the form to several colleagues who only have Reader 8

  • Cust Exit Query Err

    I have a query that takes a dept_no=10 as the default value and then displays as follows: dept_no, hrs, tot_hrs I have another query from the same infocude that has a variable like my_var with the characteristic dept_no. In this query my_var is defin

  • Can I add new fonts to pages 5.1?

    I can't seem to add any new fonts to Pages 5.1.  Is it possible?

  • Update a column value from Controller class

    Hi, hope you are well. i am facing a problem. i want to update a schema object's column value i.e:update emp set id=2 where id=:1; how can i do it from Controller Class. i would like to bind a variable in this :1. i would like to avoid pl/sql stored