IW37N- Work Order View List- PR and PO fields are blank

Hello,
We are using IW37n to view workorders list. When we add the PO and PR fields to the view list they are left blank but we know there are PR and PO related to workorders.
Does anyone know how to make them display.
Thanks.

Hi Pete ,
I am also facing the same issue .
I have created a PM order with an external service operation with key ZPM3 .
Now I have created a service PR from it and then service PO is created and then service entry sheet is done .
I am using IW37N and I am able to see PR against the PM order but
under the column" PO Number " there is no value .
My requirement is to see the list of PM orders ,with PR from them,PO against those PR's , service entry sheet doc no against those PO's.
which report could show me all these fields and why IW37N is not showing value under PO number.
Plz help
REgards
AM

Similar Messages

IW37N- Work Order list layout- PR and PO fields are blank.

Hello,
We are using IW37n to view workorders list. When we add the PO and PR fields to the view list they are left blank but we know there are PR and PO related to workorders.
Does anyone know how to make them display.
Thanks.

Hi Pete ,
I am also facing the same issue .
I have created a PM order with an external service operation with key ZPM3 .
Now I have created a service PR from it and then service PO is created and then service entry sheet is done .
I am using IW37N and I am able to see PR against the PM order but
under the column" PO Number " there is no value .
My requirement is to see the list of PM orders ,with PR from them,PO against those PR's , service entry sheet doc no against those PO's.
which report could show me all these fields and why IW37N is not showing value under PO number.
Plz help
REgards
AM

From and subject field are blank using imap account in mail.app

Recently I changed my account from pop3 to imap.
If I retrieve mail with mail.app first normally I get proper headers displayed in the message list window.
If I READ the email on my iPhone 4 let alone respond to it, etc. and then go back to my mail.app all emails I chose to read, reply to, etc. have blank from, to, and subject lines in the message list window. They appear ok in the message window but not the message list window.
Some people have same issues, but I haven't found any respons to get this fixed!!
I hope someone can help me solving this problem.
Best wishes.
Simon

In the Mail Preferences/Accounts/Advanced what have you selected with regard to Keep copies of messages and their attachments for Offline Viewing?
Also, does your provider's IMAP server support use of the IDLE Command? If getting push email on the iPhone, considered deselecting this if currently selected -- it can cause problems with servers not fully supporting it.
I think it may be useful to purge the Envelope Index file from the Mail folder. Force a reindexing by deleting the Envelope Index. With IMAP or Exchange account, forcing reindexing requires removing the account folder. See:
http://docs.info.apple.com/article.html?path=Mail/4.0/en/14019.html
Ask any questions needed to get comfortable with doing this.
Ernie
Message was edited by: Ernie Stamper

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

What is the best way to query planned orders or work orders for make items and identify the buy component that is short for supply and vice versa?

Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this

Updated iPad 2 last night. All movies (9) on my iPad can no longer be viewed. The movie plays but the photos and scene selection are blank. How do I fix this

Quit the app and restart the iPad.
In order to quit or close apps - Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps. Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Try the videos app again.

TS3999 How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook.

How do I get my Macbook Pro and iphone 5 to sync calendars in 2014? It worked fine in 2013, but the 2014 dates are blank on my Macbook. The all icloud is checked on my phone and the enable icloud account and push are selected on the Macbook.
Thanks

Do the events from your iPhone calendar appear on icloud.com? If not, go to Settings>Mail,Contacts,Calendars>Default Calendar (in the Calendars section) and make sure you have selected an iCloud calendar as your default. If you haven't, make this change, then add a new event on your iPhone calendar and see if appears on icloud.com and your Mac now.

Why is the search and logins fields are black when using AOL

Why is the search and logins fields are black when using AOL??

M3nth,
Seems like we're all asking the same question
As tst says... try not to use the one at the bottom.. it's ... hummm..
It's behavior is unpredictable...
As for the multiple listing I'll have to read Molly's response on this (I asked the same question is the "Xtreme thread")
JLV
=== EDIT ===
Hi Molly,
I read your answer on the bottom search engine..
That's what I thought it did... but it didn't work for me.. I tried to use it to find some of my own posts within LV.. and it didn't find anything.
The search was : serial
I did this while reading a LV question of the subject.
I shall experiment with the search engine again and report my findings.
R.Message Edited by JoeLabView on 03-17-2005 02:24 PM

Arbic fields and english fields are mixed in exported data from oracle

I have a oracle db with character set UTF8.
I have exported some data from a table with arabic detail through sqlplus
and saved in a text file.The file is | sepereted.
I can view this file properly while using textpad.
But in note pad the arbic fields and english fields are mixed.
I have anothe application which is accept the data from note pad only.
so i am not able to export arabic data properly in notepad.
Can any one help from this issue.?
Thanks,
nash

Thanks for your reply.
i have saved the file in UTF8 format and still the same.
i will explian you the real issue.
We have one Dot net application and we need to upload some data to this application.
I can upload the data which is contain only English detail.
But i am not able to upload the arbic detail.So i ve checked the application and the data which i am uploading to this.
And i found that the data which i am uploading is mixed with arabic fields and english fields.
There is a field seperation in my data which is '|',So i can see some arabic field is mixed with some other english field
if i open the file through internet Exploreer or notepad able to see the mixed field detail.
But i can see the data in textpad are correctly.
The upload data file is taking from oracle database through toad.
I have tried with SQL plus also.But still the same.
Please help me out from this issue?

MIRO issue (urgent!), amount and quantity fields are not captured from PO

Hi,
When we try to post thought MIRO using PO as reference, quantity and amount fields are not captured. We do MIGO first and then MIRO.
GR based invoice verification in the vendor master is selected and the check mark GR-based in the PO is selected too.
We're getting this MIRO issue for "all" PO and Service Entry Sheet.
We'll appreciate your recommendation in order to fix this critical issue as soon as possible.
Thanks in advance.

I was looking for copy controls and other functions. Glad this is now resolved. You need to award yourself points!
Cheers.

DOCTYP and IDOCTP fields are empty

Hello!
I'm using XI with the scenario plan driven procurement. I'm able to bring my orders from MM to SUS, but the purchase order confirmations make some problems.
In transaction SXMB_MONI (SUS) everything is fine, but in R/3 transaction BD87 brings an error: DOCTYP and IDOCTP fields are empty. Detailed info: An IDoc is to be generated whose control record does not have sufficient information in it. Neither the field IDOCTP nor the field DOCTYP has a value. Therefore, the IDoc cannot be stored properly.
Where can I give the system the information about that?
Hoping for help,
Barbara

Hi,
Try to solve the problem like this ,
First check the SWCV is properly configured or not and come back to IR , Refresh the SLD Cache..
Next try to activate SWCV-namespace, objects you created one by one..
refer the below links for cache related issues
/people/sravya.talanki2/blog/2005/12/02/sxicache--ripped-off - SXI_CACHE - Ripped Off
XI Runtime cache error: Cache contents are obsolete
Cache Refresh - SAI_CACHE_REFRESH
/people/sravya.talanki2/blog/2005/11/03/cache-refresh-errors--new-phenomena
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
Regards
Chilla
<i>reward points if it is useful..</i>

Group managers and Contributors fields are randomly cleared out in Terms Store Management Tool

Is there any explanation or how to solve this problem?
Group managers and Contributors fields are randomly cleared out in Terms Store Management Tool in SharePoint 2010.
Any ideas? Thanks!

Hi arevsun,
For this issue, I'm trying to involve someone familiar with this topic to further
look at it.
Thanks,
Eric Tao
TechNet Community Support

When LAST_DDL_TIME and TIMESTAMP fields are uptaded?

Hi,
I need know when the fields LAST_DDL_TIME and TIMESTAMP are updated.
- Which updated objects (tables, procedures, etc) can change them?
- Which references are updated too? All?
Thanks by any help
Moises Rodrigues
System Analist
CPM Braxis - http://www.cpmbraxis.com

Hi,
Please refrain from posting duplicate threads.
Already answered Re: When LAST_DDL_TIME and TIMESTAMP fields are uptaded?
Aman....

Work Order Basic Start Date and Basic Finish Date to be changed

Hi,
Currently the business creates work orders without specifying the work resulting which the start and fish dates on work order are same. Also we have automatic scheduling turned off. In spite of this If I am trying to manual modify the basic start and basic finish dates on work order it does not allow me to do so. This issue is seen with work orders which are Released whereas orders with status outstanding have no issues. Could anyone please let me know what could be the reason?
Thanks,
Vinay

Please check whether Scheduling type only capacity requirement is configured.
If yes, choose this scheduling type in order, you can able to change Basic start date & basic finish date.

Get the value from dropdown list (selectedIndex) and text field -- not working

Hi All,
I am trying to find and change by the values selected by user using dropdown and text field. Here is the code.
ChangeRevDetails();
function ChangeRevDetails(){
          var myDialog = app.dialogs.add({name:"Enter copyright information"});
//    var monthlist = col1.dropdowns.add('myList', undefined, myList);
          var col1 = myDialog.dialogColumns.add();
          var col2 = myDialog.dialogColumns.add();
    col1.staticTexts.add({staticLabel:"Month:"});
          col1.staticTexts.add({staticLabel:"Year:"});
    col1.staticTexts.add({staticLabel:"Rev. no.:"});
    var myList = [ "January", "February", "March", "April", "March", "April", "May", "June", "July", "August", "Sepetember", "October", "November", "December" ];
     var myMonth = col2.dropdowns.add({stringList:myList, selectedIndex:0, minWidth:100});//{minWidth:100});
     var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});
     var MyRev = col2.textEditboxes.add({minWidth:100});
    var RevMonth = (myList [myMonth.selectedIndex]);
    var RevYear = myYear.editContents;
    var RevNumber = MyRev.editContents;
    var RevToReplace1 = RevMonth +", "+ RevYear;
    var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
    var myResult = myDialog.show();
        if(myYear.editContents == "") //entry is ""
        alert("Please enter some text into the contents field.");
        ChangeRevDetails();
        else if(myResult == true) //user entered datas
            alert (RevMonth);
            alert (RevYear);
            alert (RevNumber);
            alert (RevToReplace1);
            alert (RevToReplace2);
            app.findGrepPreferences = NothingEnum.nothing;
            app.changeGrepPreferences = NothingEnum.nothing;
            // grep find/change
            app.findGrepPreferences = app.changeGrepPreferences = null;
            app.findGrepPreferences.findWhat = "[\\l\\u]+?\\s?\\d{4},?\\s+[\\l\\u]+\\.*\\s+\\d+";
            app.findGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
            app.changeGrepPreferences.changeTo = RevToReplace1;
            app.changeGrepPreferences.appliedParagraphStyle = app.activeDocument.paragraphStyleGroups.item("Back page"). paragraphStyles.item("Legal_7/9");
            app.activeDocument.changeGrep();
            app.findGrepPreferences = NothingEnum.nothing;
            app.changeGrepPreferences = NothingEnum.nothing;
    else //implies user clicked cancel
    myDialog.destroy();
The problem is, it is not taking the value which the user selects from the dropdown and the text field. It takes the default value as "January" and the year is "2013" as both of these values are given as selectedIndex:0 and editContents:"2013". I have compared the coding with some other working scripts as well, but it is not working. I have added several alert boxes to check the value we get.
Also, the find and change is also not working. Please help me on this. Thanks.
Regards,
Muthuraj. D

Change the order for dialogresults:
var myYear = col2.textEditboxes.add({editContents:"2013", minWidth:100});
var MyRev = col2.textEditboxes.add({minWidth:100});
var myResult = myDialog.show();
if(myYear.editContents == "") //entry is ""
alert("Please enter some text into the contents field.");
ChangeRevDetails();
else if(myResult == true) //user entered datas
var RevMonth = (myList [myMonth.selectedIndex]);
var RevYear = myYear.editContents;
var RevNumber = MyRev.editContents;
var RevToReplace1 = RevMonth +", "+ RevYear;
var RevToReplace2 = RevMonth +", "+ RevYear + " Rev. " + RevNumber;
didn't have a look for the find change problem

Could not view any name in list in Shuttle though there are blank rows

Hi All,
I Have a PG where i am using shuttle. Now the issue I am facing is in available list i could not view any result. rather i am getting blank row over there.
E.G if say there is 5 itemshould b in available shuttle then m not able to see tha name of item rather m getting 5 blank row in shuttle.
Can you please let me know what would be the issue.
Thanks
Debashree

Hi,
Yes i have set that ...
Thanks
Debashree

IW37N- Work Order View List- PR and PO fields are blank

Similar Messages

Maybe you are looking for