IW42 does not show goods movement at opearation level but at header level
Hi Gurus,
If you add the goods movement using IW41, it stores it correctly against the operationa and shows in GI mat doc and in doc flow under opearation but the same does not happen in IW42. is there a way to do this in IW42 so that GI mat doc shows up under opearation when we add the goods movemnt to IW42 (its an unplanned Goods movement )
Look at the below thread.
Goods movement in Confirmation IW42,
In IW41, confirmation will be done at operation level, so that goods movement also will be done at operation level. But IW42, confirmation could have been done at order level. So goods movement will happen at order level. If you want at operation level in IW42, then in IW42 give order number & operation number (its almost doing same like IW41)
Similar Messages
-
I rented a movie and it does not show up on my apple tv but is in my video app on my phone. How can I watch it on my tv?
A movie rented on an iPhone can only be viewed on an iPhone. If you want to view on TV you need to rent directly on ATV or via computer (and stream using home-sharing)
-
IPhoto 9.4.2 does not show mp4 movies to import from SD Card
Hello mates, since last december when I reformatted my Macbook, iPhoto is not showing the movies in my SD Card when I import photos. Before formatting, it always showed the photos and movies, but I don't know what happened or what I have to do to make it show and import the movies again.
If I copy the movie from SD Card to Desk and try to import it to iPhoto, it does, but when I close and reopen iPhoto, it does not show the movie there anymore and If I open the contents of iPhoto Library and check for the file, it is there fisically.
What could be happening to my iPhoto?
Thanks in advance.but it still does not accept mp4 movies neither show them in my sd card when I plug it in my MBP.
Is this when you plug in the memory card into the MBP card reader? What do you see in the card when you use the card reader? Is the Finder view preferences set to show memory cards on the Desktop when inserted into the reader?
OT -
Ipod touch does not show up under Devices in iTunes, but it does in iPhoto
My iPod touch does not show up under Devices in iTunes, but it does show up under iPhoto. Can anyone help troubleshoot this problem?
Thank you for your help.try following the info here
http://support.apple.com/kb/TS3694#error1611
Error 1611: This error may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with a known-good 30-pin Dock Connector cable, computer, and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value (00 499901 064000 0) can also confirm a hardware issue. Out-of-date or incorrectly configured proxy or security software, such as FoxyProxy, can cause error 1611. To troubleshoot third-party security software, follow these steps. -
Updated to iTunes 10.6.1.7 today from 10.5 on a Win 7 SP1 64-bit machine and attempted to add new music to the library by both drag-n-drop and import files; this new music does not show up in the library viewer but has been added to the iTunes media folder. My iTunes 10.5 version was working properly prior to the update. Any recommendations to correct this issue? Thanks!
Immediately after the install, Windows was rebooted. I also attempted multiple variations of closing and restarting iTunes and/or reboot Windows. iTunes was unresponsive to mp3 files being added. Since I was unable to see the added music files to the library, I did not try to add other files.
Out of frustration, I let iTunes run over night and to my surprise the added music appeared in the library viewer the following morning. I can now add new mp3 (and AAC also) music files to the library and it immediately appears in the viewer. How or why it now works is a total mystery. -
My purchase does not show on my creative cloud account but i am being billed for it
my purchase does not show on my creative cloud account but i am being billed for it
Some general information for a Cloud subscription
Log out of your Cloud account... Restart your computer... Log in to your paid Cloud account
-Sign in help http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
-http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html
or
This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us" -
i am trying to download facebook for iphone3gs, it seems that everytime i try to click the free button, it just goes blank green button, and would not continue downloading or does not show any movement
Delete your old Firefox Profile and create new one
*http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
Backup and Restore your profile data's
*https://support.mozilla.org/en-US/kb/back-and-restore-information-firefox-profiles
*http://kb.mozillazine.org/Profile_backup -
Airport Express does not show up under 10.3.9 - but shows up under 10.4.9
Hi
my Room Mate uses an PowerBook with 10.3.9 and was able to use his Airport Express before without any problem.
Without any reason the Airport disappeared from the options in his list in the taskbar, also looking for preferred networks does not show the station.
BUT
if I start my PowerBook - running 10.4.9 - with the latest Utility Program that came with my Airport Extreme BaseStation - I have no problems to identify, configure and connect to the Express Station!
Why is my Room Mate unable to get the Airport Express on his Mac?Max,
As I read it below, you both have separate internet sources and basically two separate wireless systems. He uses the Airport Express as a base station for his system and you use an Airport Extreme 802.11n for your base station.
You said he used to be able to access the system but now he can't. What changes to the system were made during that period of time.
Under these circumstances what I think I would try is for him to open up the old Airport Admin Utility, factory reset his Express, and then try to reconfigure it to build his own wifi system with the old Airport Admin Utility. Once he factory resets it goes back to the factory id and loses all memory of any system it may have been tied to.
I'd call the new system a different name than the old system and if he uses security use a different password than the first one.
The thing I don't understand below, if he has his own separate system, I don't understand how you can see and edit his settings because he's not part of your system. However, since you have to be using 10.4.8 or later for the new 802.11n Extreme and it looks like you tried configuring his system with the new Utility and he's running 10.3.9 - that may have something to do with it.
Beyond this, it's out of my knowledge base. -
I have some unknown Itunes charges on my credit card that I have been busting my brains on getting an answer. I HATE not getting to talk to a real person!!!! Same amount Charges show three consecutive days but does NOT show on my itunes purchase history. Suggestions greatly appreciated. A hammer to smash the computer would help too.
If they don't show on your purchase history on your account then have you have you added or changed your credit card details on your account - when you do then a small temporary store holding charge may be applied to check that the details are correct and valid, which should disappear within a few days) ? If not then you could contact iTunes Support via this page and see if they can see what they are for : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption
-
there is panel in the upper right corner of my screen that says 'copy' preparing to duplicate to "desktop". I clicked stop three days ago and it is still trying to stop. Tried to 'force quit' does not show up in finder, looked in activity monitor but i am not sure how it is listed. I am new to the mac world.
Force quit/Restart the Finder.
Then for safety...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions. -
ever since updating my apple tv to the latest software, my on screen menu is missing all the apple shows and movie catagories plus netflix is gone from my internet menu. I have home sharing turned on and able to listen to music from my desktop also see any movies I rented from apple on my desktop mac. Any ideas what could be happening.
Welcome to the Apple Community.
Check your store location is still set correctly. -
Some music does not show up on ipod in itunes, but it is there...used twoPC
Hi, my main computer is a laptop. This is the one that is updated continually and has the latest software (XP/itunes)...I have another computer, it is the big one, with all the music on it for the most part, the laptop has the new stuff...anyway, getting ready for a trip and I had the bright idea (I say that sarcastically) to connect it to the outdated machine (it works fine) and use itunes to add in other music that my laptop does not have (due to a small hard drive 60 gigs only, vs 700 gigs on the big guy)...anyway, once I turn on the ipod, the music is not there in itunes, if I connect the ipod to the laptop the music is not there too, if I do a windows search on the ipod for the creation date, or the name of the group (in this case tainted love by soft cell) it is there, it is just not in the itunes listing/database/library. I suspect being that the two different versions of itunes are different, they do not work together. I should have thought of that before, but it is too late now....So what can I do, can I copy off all the music manually onto a portable drive, delete all the songs on the ipod manually, then reimport them to have the missing songs show up? Will this also copy off the album art? Or am I totally barking up the wrong tree?
I want to of course make this as easy as possible for myself, without issues to the ipod....I tried playing the song found via windows and it did play it on the laptop, but it did not come up on the ipod it came up in the regular library, and when I tried to copy it to the ipod it said there was a corrupt library or something along those lines...the pod works fine...
I have a 60 gig color video pod....this is my second one, and I have a 40 gig 3rd generation as well (not having problems)
Thank you for any help...try just pushing play instead of clicking the artist name and then choosing the song thats not there. With mine i would push play under coldplay and it would play 1 of 10 but if i clicked coldplay and tryed choosing the song i wanted to play there would only be 6 songs there. I think the problem is because not all my songs have an album name. so those songs that are blank under album don't show up. I really don't know what the real problem is here but i think thats how to fix it.
-
Not showing recent movie i rent today but older rentals is.
i recently rented a movie, it downloaded fine and i see it on my computer but it not showing up in the apple tv rentals!
Welcome to the Apple Community.
If you have downloaded a rental onto the computer rather than the Apple TV, it will need to fully download before it will be available on the Apple TV. -
Windows 7 does not show my Ipad2 in my computer but Itunes does
I have tried 2 diff. Ipad 2's as well as an Iphone 4 and windows 7 does not see them. any suggestions ?
ITunes has nothing to do with the windows operating system so sync wont work because the photo's are on the pad not the computer. I will call apple support. I think it has something to do with the apple drivers for windows that changed in the latest upgrade
-
My I pod is not showing up in my computer
Hi there mochaflower,
I would recommend taking a look at the troubleshooting steps found in the article below.
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W.
Maybe you are looking for
-
Hi Experts What is business Transaction? What is the major difference between Copy control and Follow-up Transaction? Where we are maintain Follow-up transaction in IMG Thanks Mahi
-
Customers have been reporting "Page cannot be displayed" in IE and sending screenshots of partially loaded pages. I'm assuming we have a timeout issue. We have a proxy (HttpClusterServlet) handling the SSL, and load balancing on a few managed servers
-
Newbie ? how to set headless=true
Hi. I'm new to the awt and administration of java. I've read serveral postings telling me to set headless state by doing the -Djava.awt.headless=true but I'm not sure where to put that statement. I don't have a catalina.sh file. I'm not sure what to
-
Debug ECC 4.0 from Portal- need to put External debugger
Hi, Can anyone who was earlier working in ECC 4.0 tell me how to add an external debugger or debug Smartform from Portal. External debugger is an easy option when it comes to ECC 6.0 but there is an issue for which i need to debug ECC 4.0 and i can't
-
BPM standalone and J2EE versions
What is the diffrence between BPM standalone and J2EE versions and What are the advantages of Using J2EE Version over standlone? In configuration document it is mentioned that we need to deploy wlj2eedeployer.ear on weblogic server. Why this deployme