"IWD Bus Enumerator disabled" error message in LSC after Windows 8.1 upgrade

Hi there,
I just upgraded my T430 from Windows 8 64-bit to Windows 8.1 64-bit.
After restart, LSC shows an "IWD Bus Enumerator disabled" error message. I went to the device manager, right clicked on IWD Bus Enumerator and selected the "update driver software" option. Message came back that the latest driver is already installed. By the way, in the device manager there are two lines "IWD Bus Enumerator", where the first line is normal (i.e., enabled), and the second line shows that error message (yellow triangle).
What next? Any ideas? My laptop seems to work fine, otherwise.
Best,
Sven
Solved!
Go to Solution.

I resolved my issue by going to device manager and selecting View Hidden Devices - then expand System Devices
In my case there were 2 listings for IWD BUS ENUMERATOR - one had the yellow triangle - I uninstalled that one and restarted my laptop and the message was gone. If that does not work make sure you get the latest drivers from Lenovo and also visit Intel.com and search for WiDi - they have some programs to check drivers.

Similar Messages

  • Error message syncing iPhone after 10.5.2 upgrade

    Error message while syncing iPhone after Leopard Upgrade to 10.5.2 : "The application AppleMobileSync quit unexpectedly" -- Anybody had the same trouble after this system upgrade? Any remedy advice would be appreciated.
    Thanks

    Chris66
    Usually when this error message comes up, there is either corrupt data on the iphone or the computer.
    First of all, disconnect the iphone and completely quit itunes.
    Now, reset sync history as per the steps previously posted.
    Next, open itunes and itunes preferences (itunes at the top of the screen > preferences).
    Then go to the syncing or iphone tab and check the box to disable automatic syncing with all iphones and ipods.
    Now click ok to close the preferences pane.
    Connect your ipod and go to the info tab.
    Set itunes to replace contacts and calendar information with what is on the computer.
    Click apply in the bottom right corner.
    If it is something in the iphone that is causing this error, this should overwrite it.
    To narrow down what is causing this error on the computer, watch itunes when syncing the iphone to see what is trying to sync when this error comes up.
    After the error message comes up, go into the iphone settings in itunes and uncheck the last thing itunes was trying to sync(usually contacts or calendars), then click apply in the bottom right corner.
    This will start the sync process again.
    If it is contacts that is causing this error, try creating a group in address book, move a few contacts into the group.
    Then sync only that group to the iphone.
    Keep this process up until you've narrowed down which contact or contacts is causing the issue.
    If it is calendars causing the issue, you would go through the same process with a new calendar.
    Hope this helps.

  • HT204570 Your photo library is either in use by another application or has become unreadable. I the error message from iPhotos after the so called upgrade to Photos which left me with a blank screen

    Photos upgrade a disaster. No images appear in Photos. Able to re-establish all images in iPhoto only to have the app crash after uploading new photos from iPhone. Impossible to reload photo library as it needs 161 GB of space. The non functioning Photos library is 107 GB and the original iPhotos library from which it was created is 118 GB. I only have 146 GB available on this 1 TB drive but I am reluctant to trash Photos library in case iPhotos is truly damaged.

    And your question is?

  • IWD Bus Enumerator

    Lenovo Solution Center has identified that one of my IWD Bus Enumerators has a problem and has disabled it. Is there a way that I can rectify the problem or do I need to contact Lenovo for a warranty solution?

    Hi,
    I suspect that there’re some driver conflicts or you should install the latest drivers , I suggest you uninstall the issued one and reboot your PC, it will automatically install the drivers, check if it works.
    Here is a similar link:
    https://forums.lenovo.com/t5/T400-T500-and-newer-T-series/quot-IWD-Bus-Enumerator-disabled-quot-error-message-in-LSC-after/td-p/1270269
    But for detailed cause, I suggest you contact the Lenovo support.
    http://support.lenovo.com/en_SG/
    NOTE
    This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
    Regards,
    Yolanda
    Yolanda
    TechNet Community Support

  • TS2446 I've reset my Apple ID password twice and still get a "disabled" error message....???

    I've reset my Apple ID password twice and still get a "disabled" error message on my IPad, Iphone, and ITunes.  I have also gone into the "settings" on both the ipad and iphone and reset the passwords to no avail. 

    This is not an iPhoto issue. Contact Apple support
    LN

  • I get error messages frequently when changing windows or starting firefox

    this is the fourth time i'm trying to contact you guys. i keep getting error messages when i changed windows saying oops this is embarassing... etc. try again button works sometimes, sometimes not, if not have to restart, erases my bookmark menu tabs which i LOVE, and sometimes they come back. i love you guys so much more than internet explorer, but i have had to use internet explorer now almost all the time because of this problem. also, if you could make it so that one can delete blocks of unwanted email (like click the first unwanted email and the last one and then control/shift like in the old days) that would be AWESOME, but i have found that i can't do this in other applications anymore either so maybe it's something windows operating systems took out as they make new versions, but if you guys could create it in your email site wow, everyone would LOVE YOU!!!!!! so many do already, all my IT guys use you and my friends who are halfway computer literate. i hope you can help me with my problem, also i think i read you partner with clients for their websites to improve/add features. is that true? i'd love to do that if so, i'm using go daddy now, and haven't done half the stuff i want to do on my site. thank you for your positivity and you guys make up for those nasty virus makers who wreck people's lives, businesses,.. using their brilliance to harm people, it so sad. thank you again. i hope this goes through this time. i think i'm going to copy and paste it this time on Word so I can mail it to you if i screw up again!
    thank you again so much!
    Deborah Wong, MD
    == This happened ==
    A few times a week
    == 5-8 weeks ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; MSDigitalLocker; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729)

    HOW FRUSTRATING! NOW WHAT IS HAPPENING? WHEN I GO TO ANY WEBSITE THE PAGE FREEZES. TOP OF PAGE READS, MOZILLA FIREFOX NOT RESPONDING, THINK I"LL GO BACK TO IE, WAY TOO MANY ERRORS AND NO TECH SUPPORT ANSWERS

  • How do I correct error messages MSVCR80.dll and windows error 7 126?

    After installing the latest itunes update, I received two error messages:  MSVCR80.dii and windows error 7 126?  I cannot access itunes at all and am eager ti fux these errors.  If Apple itunes is at fault I sure wish they would fix the problem.  At least I'll save money if I can't access itunes! 

    Hey koicaretaker!
    Here is an article that will help you troubleshoot this issue:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Keep getting error message 1114 on my windows and uninstalled 7 reinstalled itunes

    Trying to sync my new iphone 5 to my itunes and it has asked me to uninstall & re install which i have but still keep gettting an error message 1114 on my windows laptop and cant log my new phone on so cannot use it Help

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    I've tried to update my ipad 2 with IOs 6 but it was not possible. An error message always appear after some time during e download. Is there an solution?

    Are you trying to update via wifi or connected to your computer?
     Cheers, Tom

  • If my Adobe Muse and Air apps are  both up to date as of today and I cannot open a Muse file, what are my options? I get an error message regarding the Progress Window showing and then Muse crashes.

    If my Adobe Muse and Air apps are both up to date (as of today) and I cannot open a Muse file, what are my options? While Muse is relinking assets I get an error message regarding the Progress Window "showing" and then Muse crashes.

    Hi there,
    Do you get this error while opening a particular file or all files?
    Please try opening a different .muse file, and check if it does the same?
    Ar you opening a .muse which is saved on a network drive?
    Thanks.

  • Trying to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    I had iTunes 10.2.1.1 but needed to upgrade to 10.6 so my iPhone could synch...I'm getting this error message "Problem with this Windows (XP) Installer package.  A program required for this install to complete could not be run."  Any ideas?

    This has been fixed.  Answer is that I needed to go to "Apple Software Update" and repair it.  (From my Control Panel).

  • Problems installing Itunes error message - Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel

    Can anyone help? I have been trying to install the new version of Itunes for ages my new iphone wont activate on the old version!! Keep getting the same error message -  Hkey_local_machine\software\microsoft\windows\currentversion\run - Verify that you have sufficient access to that key, or contact your support personnel.
    Please Help!!!!!

    That particular key can sometimes be hit by malware, liam, so just to be on the safe side I think we should try a malware scan first.
    Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
    http://www.malwarebytes.org/mbam.php
    Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look

  • [Solved] 'New' error messages during init after updating initscripts

    After updating to the latest initscripts, I got some error messages during init that I hadn't seen before.  They occurred during one of the UDev steps, and were caused by an attempt to load an IDE module despite the controller being disabled.  The controller shows up in Windows devmgr too, so I guess it's a failing of the mobo or BIOS.
    In any case, I downgraded and found that the errors were nothing new.  I'm just curious if the appearance of the errors during init was by design or a happy accident.
    Last edited by alphaniner (2011-08-01 17:07:30)

    alphaniner wrote:
    karol wrote:If you have the new (i.e. current) initscripts, you should be fine:
    http://projects.archlinux.org/initscrip … 328fbaf2e7
    http://projects.archlinux.org/initscrip … 42dfeca8c2
    I had never noticed the file before yesterday, actually. And I'm up-to-date, yet it's still full of 'em.
    You need to reboot.
    After you do, run
    tail /var/log/boot
    Mine isn't perfect, but I've already sent an e-mail to the dev (it's a matter of just a sed oneliner)
    [karol@black ~]$ tail /var/log/boot
    Tue Aug 2 05:03:01 2011: :: Setting Hostname: black ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Locale: pl_PL.UTF-8 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Setting Consoles to UTF-8 mode ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:01 2011: :: Loading Keyboard Map: pl ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Loading Console Font: Lat2-Terminus16 ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: :: Saving dmesg Log ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:02 2011: INIT: Entering runlevel: 3
    Tue Aug 2 05:03:02 2011: :: Starting Syslog-NG ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:03 2011: :: Starting D-BUS system messagebus ^[[171G [BUSY] ^[[171G [DONE]
    Tue Aug 2 05:03:04 2011: :: Starting acpid ^[[171G [BKGD] :: Starting gpm ^[[171G [BKGD^[[0;1

  • I keep getting a "Flash blocker browser settings or extension" error message in Soundcloud after installing fire fox. I have tried flash 11 & 10.3

    I keep getting an error message saying "It looks like you have a flash blocker browser settings or extension. Please enable flash to hear sound" error message come up when I try to play music in Soundcloud. I have just installed Firefox on my laptop and upgraded to the latest Flash player. I then tried down grading to Flash 10.3 but this didn't help. I have been watching programs in iplayer and had no problems there. Please help!

    I have been through this process several times. It sometimes works and sometimes it doesn't. Running in safe mode proves nothing.
    Youtube videos work fine. So flash is working. Hosts file is the default one so nothing blocked). No sit blockers etc. all disabled in add-on manager.
    Old Soundcloud works fine. Sometimes the new one does. Most of the time it does not.
    Switch to IE8 (yuch) and this gets even worse. Old SC works but new one says I need an update and provides a link. I click the link and MS site says I am a;ready running the most up to date browser.
    Bottom line...
    1) if you use IE, better go to Windows 7 or 8. Otherwise Soundcloud should be avoided. Sure, the old SC still works ... for now.
    2) if you use Firefox, roll dem bones and see what ya get. Maybe it will work. Maybe it won't. But it's a pain to have to keep clearing the cache and cookies to fix the one and only site that has this issue with Firefox 18.
    3) go to Chrome if you love google. It seems to be OK.
    4) ignore soundcloud all together. It's not going to survive long in this mode.

  • My Desktop went blank and an error message appeared saying C:\Windows\system32\config\systemprofile\Desktop refers to a location...

    This the whole error message: C:\Windows\system32\config\systemprofile\Desktop refers to a location that
    is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information
    might h ave been moved to a different location
    I restarted the pc and  through the safe mode i copied the Desktop file that was missing at C:\Windows\system32\config\systemprofile\
    from C:\Users\User. I restarted but i still get the blank desktop.
    Can you guys help me out?

    Thnx a lot LomM! My younger brother run the check disk and now it's working. But now im facing a different problem. With the sound drivers. I have not sound at all. And at Device manager I see  yellow marked devices, giving me the code error 52 ("Windows
    cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source. (Code 52)").
    So, I unistalled and re-installed but nothing. Still yellow marked. I did the Recovery thing (a couple of times using different dates ) but it did not complete successfully.  
    So I disable driver verification, while i was restarting my computer and now im getting the code 39("Windows cannot load the device driver for this hardware.
    The driver may be corrupted or missing. (Code 39)").
    it's that C:\Windows\System32\drivers\ktshunk.sys which is not getting verified. Any ideas? 

Maybe you are looking for

  • What's up with Adobe Application Manager CS6?

    If I select within Pr (CS6): Help > Updates... here is the resulting update check (as expected): But... if I directly run Application Manager either from the Start Menu shortcut, or by running the executable file (PDapp.exe) in this location: C:\Prog

  • IMac tv, can I set the imac up as a tv

    Any iMac tv help.

  • What Size Hard Drive(external) is Suggested for FCP?

    Hi, Any suggestions? Also brands, speeds, buffers, partitioning? Thanks

  • PO-PC Issue

    Hi, When we do CK11N, the cost for the material is picking up from std. Price, where the matrial valuation in config is assigned first for Purcharse info record, where they have a PO for the material. Now the system is not picking up the PO price ins

  • Otomatic set text and push button

    I want to ask one question about ASP.NET htmlparser. I want to go one url and i want to find textboxes and buton . After that i will set a value in this textbox and i will push the button.But i want to work this otomatically.I used agilepackage and i