IWeb '06 Domain cannot be found

Does anyone know how to fix this?
I have several web sites built in iWeb '06. The other day I went to open it and it's saying that "The document "Domain" cannot be opened." When I click "Okay" it says "Can't open file "~/Library/Application Support/iWeb/Domain.sites."
I checked the contents in the "Domain" file and everything seems to be there. I made a copy and tried to launch it from the copy and but I still can't get to my websites.
Any suggestions?

Are the albums "hidden" or password-protected? If so, try temporarily undoing that and see if it makes the other 40 albums available.
If not, try creating one new MobileMe album in iPhoto, publish it to MobileMe and see if it makes the other 40 albums available.
...The above ideas are from this old thread:
_'undefined' MobibleMe Gallery widget_

Similar Messages

Force Quit iWeb now website cannot be found in browser

I force quit iWeb after it taking 10 minutes to publish a photo page. I was playing around with slide shows and dragged and dropped an event onto the page. The event actually had a video clip along with the other pictures and I have a feeling this large file is what was taking so long to publish. I relaunched iWeb and published and now the site cannot be found. What have I done??? :o(

have you tried republishing? also check to see if your logged in to your idisk/mobileme idisk with the account that you want to publish with, to check go to system preferences>mobile me, then sign in.

IWeb Mobileme gallery cannot be found

I use iphoto to publish my pictures to my MM gallery this all works a treat and i can view them without a problem. When i want to share these pictures i always used iWeb and then the Mobileme widget, but lately it cannot find any MM galleries the list is blank. There are over 40 in there and it used to work i think it has happened since i put snow leopard on any ideas ?

Are the albums "hidden" or password-protected? If so, try temporarily undoing that and see if it makes the other 40 albums available.
If not, try creating one new MobileMe album in iPhoto, publish it to MobileMe and see if it makes the other 40 albums available.
...The above ideas are from this old thread:
_'undefined' MobibleMe Gallery widget_

The BPEL domain "services" cannot be found

I get the following error while invoking a web service.
<remoteFault xmlns="http://schemas.oracle.com/bpel/extension">
<part name="summary">
<summary>when invoking locally the endpoint 'http://..........', ; nested exception is: ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "services" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</summary>
</part>
<part name="detail">
<detail>ORABPEL-02052 Cannot lookup BPEL domain. The BPEL domain "services" cannot be found; the domain may not have initialized properly. Please verify that the BPEL domain loader has a valid set of initialization properties in the application properties file.</detail>
</part>
</remoteFault>
Anyone with similar issues?

bstn,
here is why - services is reserved within bpel .. (for hw and idm) - can you pls redeploy you service with a different path and see if it works ..
The reason is that optSOAPShortcut set to false, will cause performance loss, as everything (even local process to process calls) will use ws stack instead of in memory..
Nevertheless if this is not the case, I'd really like to see what is the endpoint the ws stack is trying to call to ensure we are not running into the wrong direction..
thx clemens

WSM00101 error: The specified keystore file /domains/wlsaas/config/fmwconfig/default-keystore.jks cannot be found

In JCS 13.2, same endpoint testing get this error starting last week
oracle.wsm.common.sdk.WSMException: WSM-00101 : The specified keystore file /domains/wlsaas/config/fmwconfig/default-keystore.jks cannot be found; it either does not exist or its path is not included in the application classpath.
Same app deployed to local Weblogic, against same endpoint, works fine.
Ran another testing in JCS 13.1 use the same endpoint and username & password for web service call,
got this error
InvalidSecurityToken : The security token is not valid.
Any thoughts?
Thanks,
Philip

I think its a known issue your service likely uses message protection which, as I understand, is not available, see 18386527 through the support system.
Jani Rautiainen
Fusion Applications Developer Relations
https://blogs.oracle.com/fadevrel/

There has been an error creating the personal site. User cannot be found

Few of my Domain Users are able to create MySite and few of them are not, though they are having same permission.
There has been an error creating the personal site. Contact your site administrator for more information.
Event Viewer is showing :
My Site creation failure for user 'DOMAIN\username' for site url 'http://10.31.2.9:46744/personal/username'. The exception was: Microsoft.Office.Server.UserProfiles.PersonalSiteCreateException: A failure was encountered while attempting to create
the site. ---> Microsoft.SharePoint.SPException: User cannot be found.
Below are the DLL versions of my installation.
Microsoft.SharePoint.Portal.dll : 12.0.6420.1000
Microsoft.SharePoint.Portal.dll : 12.0.6422.1000
Please suggest.
Thanks in Advance

Please note for future reference that you should only ever post any one question ONCE.
Posting it twice means that there are parallel threads and peoples time is wasted.
Here one copy was posted as a new thread and the other copy was posted as a reply in another thread *which had already been closed by the Original Poster years earlier*.
You should not in any case add new questions to existing threads and especially not to old, closed, threads.
I have therefore deleted that other copy of this post. This is now the only place that people will see your question and the answers to it (which is how it should be).
Moderator pre-2010 forums
SP 2010 "FAQ" (mainly useful links):
http://wssv4faq.mindsharp.com/default.aspx
WSS3/MOSS FAQ (FAQ and Links) http://wssv3faq.mindsharp.com/default.aspx
Both also have links to extensive book lists and to (free) on-line chapters

Package load Failed! Invalid package Title, manifest file cannot be found

Greetings. I am new to UPK and am seeking guidance on an upgrade to 11.1.
A little background on what we are trying to do:
We have two machines:
Windows 2003 machine in domain 'X' | UPK 11.0.0.1.
Windows 2008 R2 virtual machine in domain 'Y' | UPK 11.0 on the new machine first, install the 11.0.0.1 patch, and then upgrade to 11.1.
We are using the same database as the old machine. Developer Server is Standard Authentication, Knowledge Center is Windows authentication.
==========================================================================================
So far we have installed 11.1 with the respective database upgrades, but are lost as to how to migrate the old Content Root data. We have copied all the content to the new Content Root, added it to IIS like the old machine, and verified that the UPK database Content Root path is correct and working.
For the rest of the post, I am remoted into the server from my local workstation, and then using IE to access KCenter on the server's FQDN, not via localhost.
Since I am green, so I presumed that I would need to import the titles under Manager in KCenter. I zipped each content folder individually (they are named "1", "9", etc), and then attempted to import each zip file.
NOTE: At this stage sometimes we are prompted to authenticate again. When it does, sometimes the credentials that we know work, get rejected and we are prompted again. This will repeat until we get a 401 and we have to start over. We have verified that the Windows account currently in session with the site is valid and has administrator authority within KC.
NOTE2: On the first few tries, .NET complained that maxRequestLength was not large enough. I had our servers team increase it on the actual server in order for us to proceed.
Provided we don't have to authenticate again, or that it actually accepts our credentials, we get to the 30% mark and then receive the error: *"Package load Failed! Invalid package Title, manifest file cannot be found"*
Does anyone have any wisdom for this process? The title importation section in the deployment manual is not helping, and the administrator from whom I am taking over this software has not had to deal with this before.
Thank you,
Ian
Edited by: 986290 on Feb 5, 2013 10:21 AM

Hi Marc, thanks for the post,
I have gone through an extensive troubleshooting process with Oracle, including their development team, in order to fully complete our project setup. As a supplemental bit of information, we also were having connection errors when attempting to publish directly to the knowledge center.
As far as the context of this post, here is the solution in brief:
1) Verify that the package being imported was published from the same version of the Developer Client as the Knowledge Center installation's.
2) Check for database consistency issues. In our case we were using a database that was built in another domain. After numerous attempts with Oracle support on the line to determine the inconsistency, it was decided to completely reinstall and build a new database from scratch in the new domain.
3) Check application pool identities and access (while we had some inconsistencies here, correcting them did not change the behavior of the import/publish errors)
In review, a lot of what we had setup was correct. Our primary point of failure, we feel, was using the old database. Technically this should not have been a problem, but Murphy likes to get his way sometimes.
Cheers,
Ian

The pool managing the instance is not available or the location monitoring object cannot be found - discovery progress

Hi,
I have installed scom 2012 with integrated SP1 on windows server 2008 R2 with integrated SP1 and SQL 2008 R2 SP2.
The Problem I have is when trying to discovery I´m getting this error:
The pool managing the instance is not available or the location monitoring object cannot be found
Date: 05.03.2013 14:44:22
Application: Operations Manager
Application Version: 7.0.9538.0
Severity: Error
Message:
Microsoft.EnterpriseManagement.Common.LocationObjectNotFoundException: The pool managing the instance is not available or the location monitoring object cannot be found.
   at Microsoft.EnterpriseManagement.Common.Internal.ServiceProxy.HandleFault(String methodName, Message message)
   at Microsoft.EnterpriseManagement.Common.Internal.AdministrationServiceProxy.LaunchDiscovery(Guid batchId, IList`1 jobDefinitions)
   at Microsoft.EnterpriseManagement.Administration.ManagementServer.BeginExecuteWindowsDiscovery(IList`1 discoveryConfigurations, AsyncCallback callback, Object state)
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Administration.DiscoveryProgress.<>c__DisplayClass7.<SubmitTask>b__3(Object , ConsoleJobEventArgs )
   at Microsoft.EnterpriseManagement.Mom.Internal.UI.Console.ConsoleJobExceptionHandler.ExecuteJob(IComponent component, EventHandler`1 job, Object sender, ConsoleJobEventArgs args)
How can I solve this? Thank you.
gruss Daniel Ovadia MBSS - Microsoft Dynamics CRM MCNPS

See the article I wrote/posted here about monitoring Domain Controllers: http://adinermie.wordpress.com/2014/02/26/scom-agent-grayed-out-when-trying-to-monitor-domain-controllers/.
And to add an account to Local Administrators role on a Domain Controller, follow this:
Open a command promt using the "Run as administrator" function and then run the following command.
net localgroup Administrators /add {domain}\{user}

Instruments in Logic Pro 9 Library will not load: I try to add a new instrument on a project and get a "cannot be found" error.

Ladies and Gentlemen,
As a faculty member in the School of Music, I have just acquired a copy of Logic Pro 9.1.8 through my University. The programs and instrument packs were installed by our IT department and show as being fully installed on Logic Pro when I search for additional content through the Logic Pro tab at the top of the screen. The window shows that all 6 Jam Packs, Logic Pro & Main Stage Content (Essential and Additional) GarageBand content, and Surround content is installed. However when I try and add a new instrument on a project, most of these instruments cannot be found. I get the following error:
Audio file “KB_pizz_f_C1.wav” not found!
I then press the Continue Tab, and it looks for the instruments in an empty file that Logic creates in the Music section of the hard drive. I have investigated the sounds by going through the MAC Hard Drive>Library>Application Support>Logic>Sampler Instruments folder, and tried to copy the sounds into the Music>Logic folder created by the program. That does not work either. Even attempting to go into these Logic Pro instrument files one at a time has proved fruitless. I am told that the file cannot be opened.
The files appear to be installed, but cannot be accessed or opened. They all have that translucent grey appearance when I attempt to click on the icon. This is true for about 80% of the files in the instrumental library. Whenever I create an instrument, the EVP88 Electric Piano is installed by default. There are a few instruments that I can successfully replace this default instrument with, but a majority of the instrumental library remains unavailable. Can anyone help?

Kurt:
You might try a different way of adding the video files to the web page. This demo page has one where the file does not load until the play button is selected: Opening Item in a New, Precisely Sized Window. This demo page has 9 short videos on it using that method: PhotoPresenter Animated Slideshow Themes. Just add a screenshot of one of the movie frames or any photo you want and add the Play button on or below it.
You manually upload the movie file to your server so iWeb is not involved in the uploading the file at any time.
Similarly this demo page, QT movies via iFrame, has a method that has you manually uploading the file to the server and linking to it via iFrame code. That page also has other similar methods.
Another method is demonstrated in Roddy's iWeb for Musicians site on his Video page. Here you also upload manually.
OT

THE PAGE CANNOT BE FOUND - HTTP ERROR 404

I have just installed i-WEB 08 and have tried to publish a web page. I have saved, as prescribed and, to my knowledge, there are no passwords associated with the web page. When I try to access the page using SAFARI v3.0.4 the following error message appears:
"The page cannot be found. The page you are looking for might have been removed, had its name changed, or is temporarily unavailable. Please try the following: Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly. If you reached this page by clicking a link, contact the Web site administrator to alert them that the link is incorrectly formatted. Click the Back button to try another link.
HTTP Error 404 - File or directory not found.
Internet Information Services (IIS)"
I have checked address is as supplied and tried adding my user name to the www address without luck. Friends have also had same error message.
Can anyone supply an answer, please.

Did you publish to .Mac or another host?
Were there any warnings or errors during publishing?
What is the URL of the page you get the error on?
By the way, this is the "+Previous to+ iWeb '08" forum; the iWeb '08 Forum is here:
http://discussions.apple.com/forum.jspa?forumID=1193

WebDav using https fails with network name cannot be found.

When I attempt to connect to a Webdav server from a Windows 8.1 box it fails with
System Error 67 has occurred.
The network name cannot be found.
I am using the net.exe USE command with the following syntax:
net.exe use Z: https://dav.DomainYaya.com/ <PASSWORD> /user:USERNAME
This exact syntax works for Windows 7.
I have more than one Windows 8.1 box where this fails.
There are various suggestions found all over the internet for various other situations. They do not apply or do not work.
For example, you will find an issue involving sending Basic authentication over http where there are suggestions about changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\WebClient\Parameters
That does not work. There is also discussion about the Webclient service. (it is running). One can find discussion of the redirector. (The SYS file is present and is installed with Windows 8+ anyway.)
Using HTTP only fails similarly but with error 53 (but I only did that as a test.) The issue is the HTTPS version.
I have BTW tried this with two different webdav servers.
Any help is appreciated.
Joe

Hi Joe,
Based on our research, the error 67 have the following several possable causes:
•IIS is not installed or is not running on the server that you are attempting to connect to.
•You have not installed the WebDAV Redirector on your client system.
•The WebClient service is not running on your client system.
•You have not enabled WebDAV on your web site.
•You are using Basic Authentication and connecting to your web site using HTTP instead of HTTPS.
•You are connecting to a web site on your local network that is using Fully-Qualified Domain Names (FQDNs) for name resolution, your web site uses Windows Authentication, and you have not added the web site's FQDN to the proxy server bypass list on your client.
For more information, please refer to the article as below:
Using the WebDAV Redirector
http://www.iis.net/learn/publish/using-webdav/using-the-webdav-redirector
According to the test, I am able to reproduce this issue in my lab. By default, the Webclient service is not running on windows 8.1 client. But for windows 7 client this service is running by default.
So please try to start the WebClient service on windows 8.1 client to check if it helps.
If you have any question, please don't hesitate to let us know.
Karen Hu
TechNet Community Support

"The home folder could not be created because the network name cannot be found" error in AD users and computers

Our home folders are stored on a non-windows NAS device and with Windows XP and 2003 we've always got the above error when creating or modifying users home folders, even when the shares were al ready created and being used.
However this was never really a big issue as the error that popped up was really for information and finshed with a "we've modified the user properties anyway, please create the share manually" type message.
Unfortunately now we are moving to windows 7 and 2008R2, this last part of the the message is missing and it won't accept the correct value.
This issue may be in the way that the NAS device shares the folder, as only the username that matches the folder name can access the share. This behaviour can't be modified.
Is there a way to get Windows 7/2008R2 AD users and computers to behave the same way that Windows XP/2003 does , i.e. don't try and create the share just set the value in the user properties ?
The AD is still at 2003 level and we can still use Windows XP/2003 clients to make the changes but this is a bit of a limitation.

The KB article is almost what we have apart from theitalic underlined
part
Consider the following scenario:
You use a domain administrator account to log on to a computer that is running Windows 7 or Windows Server 2008 R2.
You use the Active Directory Users and Computers Microsoft Management Console (MMC) snap-in to connect to a domain controller.
You open the Properties dialog box of a user account.
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
You set the Remote Desktop Services Home Folderattribute to the shared folder path.
NoteThis attribute is located on the
Remote Desktop Services Profiletab.
You click Apply or OK.
In this scenario, you receive the following error message:
The home folder could not be created because: The network name cannot be found.
Note If you click Apply or OK again, no error message is returned. However, the setting is not saved.
I think the important bit is
The user account has sole access to a shared folder path that cannot be accessed by the administrator account.
We manually create the shares on our NAS and then just want to enter the path in the profile tab, I suppose the question is how to we stop it trying to create the shares ?

Taskdef class weblogic.wsee.tools.anttasks.JwscTask cannot be found

Hi,
I use ant to deploy adf web applications. However, I get errors:
--------------error----------------
Buildfile: E:\SOAworkspace\ANT\Project1\build2.xml
[echo] Classpath: D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server\bin\weblogic.jar
BUILD FAILED
E:\SOAworkspace\ANT\Project1\build2.xml:14: taskdef class weblogic.wsee.tools.anttasks.JwscTask cannot be found
Total time: 0 seconds
--------------ant------------------
<project default="all">
<property name="weblogic.jar.classpath" value="D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server\bin\weblogic.jar"/>
<echo>Classpath: ${weblogic.jar.classpath}</echo>
<target name="all" depends="clean,build-service,deploy" />
<target name="clean">
<delete dir="output" />
</target>
<path id="my.path">
<pathelement path="D:\weblogicSA2011\jdk160_18\lib\tools.jar"/>
<pathelement path="D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server\bin\weblogic.jar"/>
</path>
<taskdef name="jwsc"
classname="weblogic.wsee.tools.anttasks.JwscTask" classpath="D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server\bin\weblogic.jar" />
<target name="build-service">
<jwsc srcdir="HelloWorld" destdir="c:\helloWorldEar">
<jws file="ping.java" type="JAXWS"/>
</jwsc>
</target>
<taskdef name="wldeploy" classname="weblogic.ant.taskdefs.management.WLDeploy" classpath="D:\weblogicSA2011\wlserver_10.3\server\lib\weblogic.jar"/>
<target name="deploy">
<wldeploy action="deploy"
name="otnapp_application1.ear"
source="E:\SOAworkspace\otnapp\deploy\" user="weblogic"
password="welcome1"
adminurl="t3://localhost:7001"
targets="wl_server"/>
</target>
</project>

Those taskdefs are in the %WL_HOME%/server/lib/weblogic.jar file. Are you sure that you have that file in a <path> element of the Ant build.xml script (or in the CLASSPATH environment variable that Ant is using)?

AddPermission - User cannot be found.0x80131600

Hi!
I need help. I have SharePoint Enterprise 2013 in the company and I'm using the Web Services to create Sites and add permissions. But, When I goint to assign full control access a user domain, the system show to exception "User cannot be found.0x80131600".
This is my code:
Dim oSPPermi As New SPProyectos_Permissions.Permissions
Dim credentials As New Net.NetworkCredential
credentials.UserName = "<Usuario1>"
credentials.Password = "<Contraseña>"
credentials.Domain = "<Dominio>"
oSPPermi.UseDefaultCredentials = False
oSPPermi.PreAuthenticate = True
oSPPermi.Credentials = credentials
oSPPermi.UnsafeAuthenticatedConnectionSharing = True
oSPPermi.Url = "http://SharePointRoot/<Sitio>/_vti_bin/Permissions.asmx"
oSPPermi.AddPermission("<Sitio>", "Web", "<Dominio>\<Usuario2>", "user", -1)
Any idea??.
Thank you!!

This is common when a user has left a company and is still listed as an owner of the document. When the document is moved to the new environment, it has no record of the old user.
Did you migrate using a migration tool or database attach? Migration tools usually have an option to handle orphaned users allowing you to map them back to the system account.
Corey Roth - SharePoint Server MVP blog:
www.dotnetmafia.com twitter: @coreyroth |
SP2 Apps

Exchange 2010 - New-Mailbox - A positional parameter cannot be found that accepts argument '-PrimarySmtpAddress'.

Hi,
I am currently writing a powershell script that utilizes the new-mailbox command of EMS to create a shared mailbox.
I am connecting to EMS via a remote PSSession object.
When I try and specify an alternative SMTP address via the -PrimarySmtpAddress paramater I get the error
" A positional parameter cannot be found that accepts argument '-PrimarySmtpAddress'.
I have confirmed that the version of Exchange 2010 installed on the server should have this parameter - Version 14.3 (Build 123.4)
An example command :-
New-Mailbox -Shared -Name "SharedMailbox_test" -Alias "testsharedmailbox" -DisplayName "SharedMailbox_test" -UserPrincipalName "[email protected]" -OrganizationalUnit "OU=Mailboxes,OU=Accounts,DC=domain,DC=com"
-Database "DB1" -PrimarySmtpAddress "[email protected]" -force
Has anyone else experienced this behavior?
Steve.
Just a good old boy, never meaning no harm

Hi Rich,
That was my initial thought too, so I triple-checked my command to see if it was a simple syntax error - it wasn't.
On further investigation I compared the list of parameters available in a DEV EMS session (on where I know the command works) against the one in PROD where the problem occurs. Both sessions are running the same version of EMS.
I ran the following to get a list of parameter names in both sessions :-
$a = gcm New-Mailbox
$a.Parameters.Keys | sort
Here's the results :-
DEV EMS (working)
Prod EMS (missing)
AccountDisabled
ActiveSyncMailboxPolicy
AddressBookPolicy
Alias
Alias
Arbitration
ArbitrationMailbox
Archive
ArchiveDatabase
ArchiveDomain
AsJob
AsJob
Confirm
Confirm
Database
Database
Debug
Debug
Discovery
DisplayName
DisplayName
DomainController
DomainController
Equipment
Equipment
ErrorAction
ErrorAction
ErrorVariable
ErrorVariable
FirstName
FirstName
Force
Force
ImmutableId
Initials
Initials
LastName
LastName
LinkedCredential
LinkedDomainController
LinkedMasterAccount
ManagedFolderMailboxPolicy
ManagedFolderMailboxPolicyAllowed
ModeratedBy
ModerationEnabled
Name
Name
Office
OrganizationalUnit
OrganizationalUnit
OutBuffer
OutBuffer
OutVariable
OutVariable
Password
Phone
PrimarySmtpAddress
RemoteArchive
RemotePowerShellEnabled
ResetPasswordOnNextLogon
ResetPasswordOnNextLogon
ResourceCapacity
RetentionPolicy
RoleAssignmentPolicy
Room
Room
SamAccountName
SamAccountName
SendModerationNotifications
Shared
Shared
SharingPolicy
ThrottlingPolicy
UserPrincipalName
UserPrincipalName
Verbose
Verbose
WarningAction
WarningAction
WarningVariable
WarningVariable
WhatIf
WhatIf
It might be a permissions-based issue, but I don't own either EMS session so can't test personally.
I will keep investigating and update here once I have some further information.
Regards,
Steve.
Just a good old boy, never meaning no harm

IWeb '06 Domain cannot be found

Similar Messages

Maybe you are looking for