IWeb '06 with Godaddy domain_problem after replacing folder

iWeb has always worked great.... until I had a friend rewrite some of the HTML with his editor. I ended up with a NEW folder containing all html's, index,etc. I mounted iDisc to my computer and replaced the old folder with a new one (iDisc-Web-Sites-foldername).
Since then I had lost my site, meaning its not published. What am I missing. I 've spent days trying different things. Would genius bar be able to help?? Thanks.

http://www.igorborovac.com is the GoDaddy domain
MobileMe user is iborovaci
Folder in Sites is ib
http://www.igorborovac.com/iWeb/ib/Photography.html
my photography page is there though . Makes me think that index is not connected or in the wrong place.
Thanks Tom.

Similar Messages

  • IWeb hosting with GoDaddy

    After messing with GoDaddy's hosting options a bit, I got my iWeb site hosted with the "www" prefix, but I can't for some reason get my site hosted without that prefix. You have to type"www" before the address every time in order to see the site, otherwise it just shows a parked page.
    See for yourself:
    http://www.usborneartistry.com - should work.
    http://usborneartistry.com - never works.
    Any help?

    Your domainname is usborneartistry.com
    Your subdomain is www.usborneartistry.com
    That's the one you use for MMe.
    All other (sub)domains point to somewhere else.
    Read this article how I setup my domain.
    http://www.wyodor.net/Domain/
    **“I may receive some form of compensation, financial or otherwise, from my recommendation or link.”**

  • Blinking Folder with Question Mark after replacing Hard Drive

    I have a 2010 Macbook Pro. It recently stopped starting up.  I took it to the Genius Bar and the guy working there told me I needed to replace the hard drive.  I did that.  Now when I start the computer up I get a blinking folder with a question mark on it.
    I've tried holding Option to get to the Start Up Manager and I've tried holding Command+R to get to Recovery and both give me no results.
    I cannot find my original Installation Disc.
    Can anyone give me advice on what I should do next? Do I need to get another copy of the Install DVD to continue?

    Install Snow Leopard from the original discs that came with the computer. You cannot use a retail Snow Leopard DVD with that model. Update to 10.6.8. You can then redownload Lion or Mountain Lion freely if you have purchased them already.
    The first thing you must do is partition and format the drive before you can install OS X. To do that you will need an installer disc. You can purchase replacements from Apple:
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.
    You cannot use Internet Recovery unless you had Lion or Mountain Lion already installed. In that case see:
    Install Lion/Mountain Lion on a New HDD/SDD
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    Boot to the Internet Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
    Partition and Format the hard drive:
    1. Select Disk Utility from the main menu and click on the Continue button.
    2. After DU loads select your external hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
    Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Install button. Be sure to select the correct drive to use if you have more than one.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.

  • Problems with random shutdown after replacing a swollen battery

    Hello all,
    Perhaps one of you can help with this issue.
    I'm using a Macbook Pro 17" mid-2007 model. A few months ago, the power disconnected from the machine when the battery had already run down and the machine did a hard shutdown. When I booted it back up there were serious problems with the display. Eventually it stopped working altogether. I took it for service and it was determined to by the NVIDIA graphics processor problem, so Apple replaced my motherboard.
    When I got the machine back from servicing, there was a rattle in the right fan that gradually got worse. After a while the touchpad button stopped depressing in the center. I also experienced several random shutdowns while operating on battery power. I learned about the swelling battery issue with macbooks and ordered a replacement. By the time the replacement battery arrived my original battery was quite swollen. I'm concerned that the swelling battery may have warped the case a bit, leading to the fan noise.
    I have now replaced the battery, but I'm still experiencing random shutdowns after 20+ minutes of use on battery power. I have done the RSS tests that were recommended in other forums and there doesn't seem to be any random shutdown problems when I'm plugged in -- only under battery power. My understanding is that a swelling battery can sometimes cause the battery to disengage from the electrical contacts on the MB, causing a sudden shutdown. I'm wondering why the problem is persisting now with a new battery? After one random shutdown, I tried to power up again using the battery, while pushing the battery into place at various angles, but I couldn't find any angle that would give power to the machine. The fan noise is also still present.
    Can anyone offer an explanation or advise on any methods to overcome these random shutdowns? I have checked the console and the machine isn't registering any error when it shuts down, although when it restarts it says "DirectoryService[35] Improper shutdown detected"

    Yep, it is video (or: or audio for video) so unless you're sure you need it (because you work or will work with the DVC Pro HD video/audio codec), you can remove the plug from its' folder and put it in your documents folder (don't trash it, I have no idea if it is necessary for non-DVC Pro HD users to have it installed too).
    The WWW is littered with posts from people encountering bugs and crashreports with DVCPROHDAudio.plugin as the main suspect. Most of those posts seem to be from video people rather than audio folks.
    http://www.google.nl/search?q=DVCPROHDAudio.plugin&ie=utf-8&oe=utf-8&aq=t&rls=or g.mozilla:en-US:official&client=firefox-a
    But, if you get crashes and you see this one mentioned in the report, disable it, restart, and see if the problem's gone.

  • IWeb sites with photo slideshows after migration from MobileMe

    I raised this question in another discussion earlier today in response to another post in the MobileMe forum (no answer yet), but the recent confirmation about the death of MobileMe webhosting brings new urgency to this question for me, so I figured I'd post it in the iWeb forum.
    I knew that if I migrated my iWeb sites to another host, I'd lose the counter, etc. I wasn't concerned about that, and don't have a blog or comments area that would be impacted. But, on my two sites (iWeb -->MobileMe), there are many pictures--and slideshows are an important part of those sites. Will the slideshow feature of iWeb be able to be used after I migrate to another host  such as hostexcellence or godaddy??? If that's true, then I really do have a problem. (I'm not talking about galleries from iPhoto to mobileme, but photo pages in iWeb sites.)
    I've spent a ton of time over the last couple of years on those sites, and would hate to redo them. While there may be alternatives to the iWeb slideshow, it will take me quite a while to figure it out. (I never had a desire to learn how to do that--if I did, I wouldn't have needed iWeb.)
    If anybody who uses the iWeb slideshow on a photo page and has their sites hosted somewhere other than MobileMe could let me know--I'd appreciate it. (Let me know which host you use please!) Thanks.
    I guess related to this, if it's absolutely not going to work anymore, suggestions would be appreciated. Do I have to redo my sites for this? Is there an "iWeb like" program that has an easy to use slideshow for a photopage that would work? If so, I guess I have a year to redo my sites. )

    Past experience has taught me not to rely on media player assets on third party servers. Yahoo pulling the plug on the EasyListener player is a case in point.
    As OT has pointed out, the slideshow works on other servers but, according to Cyclosaurus, some necessary assets are on the Apple server.
    Wouldn't it be reasonable to expect that Apple will make these assets available after the demise of MobileMe if enough people requested this?
    The iWeb method of getting media onto websites leaves a lot to be desired and there are a lot of other ways to display music, movies and photos. The photo page is one of iWebs few triumphs but there are many alternative slideshows and banners.
    Most of these methods require that assets are uploaded to, ideally, your own server but its not so difficult once you grasp the concept and the basics of FTP.
    iWeb does provide two other methods of publishing apart from MobileMe. The built in FTP is just as quick, easy and convenient as publishing to MobileMe once you set it up.
    Publishing to a local folder and uploading via an FTP app. allows you to add SEO tags and optimize the files for faster download.
    A good FTP application makes the task of uploading media player assets very easy - drag and drop.
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Strange noise problem with music layer after replacing the music file using script in CS6

    Hey guys,
    I got a strange problem. Sometime when I import a music file, or replace a music footage with another music file using the "replace()" or "importFile()" method, the music layer added one second noise at the beginning. like this,
    Does anyone know what's going on here?
    I'm using After Effects CS6 windows Server 2008 64bit.
    Thanks in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    Hi Myleniu,
    Thanks for your replay. Actually, it doesn't matter what makes up my comp, this problem just randomly happen when I render any comp. For example, I have a comp named "noise", I run a script to replace the music then render it, I use a "for" loop to do this 5 times and the music noise problem just happen one time.
    I'm starting to think that win server might be the problem.

  • Re-Publishing an iWeb site with GoDaddy

    I am having a very frustrating issue when a attempt to re-upload my already made iWeb site onto a domain that I am paying for through GoDaddy. I started the site two years ago with a two year plan for hosting on GoDaddy. Everything was fine for those 2 years. Then, just recently those 2 years ran up and the web page went blank. So I payed more through GoDaddy to extend my hosting plan for 3 more years. Through doing this, GoDaddy gave me a new web hosting username and password that they told me to put in iWeb when i launch the site. So I went back to iWeb and when I click the "Publish Site" button, a notification drops down and says that the site cannot be published because the username or password are incorrect. However, it displays the OLD username and there is NOWHERE to change it to the new one that GoDaddy has given me. I have been through every menu I could find in iWeb (I am using the iLife '11 version) and cannot find anywhere to change this username and password. This is extremely frustrating because I am paying for the hosting time even when the site is not running. Please Help!!! THANKS!

    @Shawn2375 - This may assist you with uploading the site: http://x.co/mXkk Also in hat article it links you to the FTP article to help reset the password if need be. Support is also open 24/7 to assist you as well. Thanks for posting! ^Colby Go Daddy Social Media Team

  • Create a restore point fails with 0x81000101 error after replacing hard drives

    I recent had a hard drive failure so, figuring that I may as well gain something for all of the work, I replaced both drives in my RAID 1 array (thereby doubling the drive space).  I then restored from back up and all has appeared well for several months
    now.  Last week I started having trouble with RDC which led me to potential issues with my Intel RAID driver which finally led me to System Restore points.  It turns out that they haven't been working for some time now and I've been unable to get
    them started using any of the advice in the other discussions on this particular topic.
    All of the necessary services should be running.  I've also tried turning system protection off/on.
    The new information that I provide is that when I first opened the System Protection tab, I found two entries for the C: drive.  The first had protection turned off.  The second, named OS, was listed as missing.  After a couple of attempts
    with the configuration, I ended up with one entry for OS (C:) with protection On.  It still didn't work which led me to the forum and many failed attempts at getting this one feature working.
    One of the other discussions mentioned the RestoreSystem log files.  They are, of course, binary files but I was able to see that I'm getting something called SxRegReadDWORD4FAILED6 fairly soon followed later by a FAILED CSpp::_CreateSnapshotSet.
    I'm hoping that somebody with the right tool and knowledge to actually read those files can help me get restore points working again.

    Hi,
    What is the full error messages? Like this?
    The shared restore point operation failed with error (0x81000101) The creation of a shadow copy has timed out. Try this operation again.
    If yes, then we might take a try with the method mentioned in the below blog:
    Windows Server Backup failed to backup with error 0x81000101
    Let us know the process.
    Best regards
    Michael Shao
    TechNet Community Support

  • Problems with back up after replacement of hard drive

    Hi,
    Recently I had my Seagate hard drive change due to a world wide recall by Apple. Prior to changing, I backup everything on my Mac using Time Machine with Time capsule. The technician bootup my system using a boot disk I think, after that I transferred all backup data from my time capsule to the Mac. Everything seems alright with the "restore" until I want to back up my latest data....I could not back up as my previous latest copy and just backup teh changes. The TCapsule showed my data which is 259GB but I cannot use back this data.
    Do I have to delete this copy of backup in TC and restart the process from strt again? 259GB might take up to 24hours.
    Please advise.
    Andy

    You need to erase the Time Capsule drive and start again. Whenever you change a hard drive, motherboard, etc., then Time Machine considers that a new computer and wants to create a new backup.
    Use Airport Utility to erase the Time Capsule drive. Do not try removing the data manually.

  • Problem with time machine after replacing hard drive

    A couple of days ago i went to the apple store and got the hard drive replaced on my macbook pro. When i got home i realized i couldnt back up from my time capsule. When i open time machine the only backups i can find are from "today" and i cant find anything else. I have not deleted anything and have not got any warnings about any backups being deleted.
    I then went in to the time capsule from the sidebar in finder -> data, in which i found two sparsebundles. When clicking on the one i needed, i got this message:"no mountable filesystems". And from here on i dont know what to do.
    I have been reading all over the forum, but can not find the answer. Also have in mind i am NOT a mac geek and know very little about this. I just want my important files back on my mac in a way i can understand.
    Any help appreciated!

    MAC.sparsebundle modified 21.june 2011 and MACBOOKpro.sparsebundle modified today
    MAC.sparsebundle is the one i want to access.
    2011-07-05 20:02:19 +0200: Disk Utility started.
    2011-07-05 20:04:41 +0200: Verifying volume “Time Machine-sikkerhetskopier”
    Starting verification tool:  2011-07-05 20:04:41 +0200
    2011-07-05 20:04:41 +0200: Invalid content in Journal
    2011-07-05 20:04:41 +0200: Checking Journaled HFS Plus volume.
    2011-07-05 20:04:41 +0200: Detected a case-sensitive catalog.
    2011-07-05 20:04:45 +0200: Checking Extents Overflow file.
    2011-07-05 20:04:56 +0200: Checking Catalog file.
    2011-07-05 20:23:35 +0200: Stopped by user
    Verifying tool completed:  2011-07-05 20:23:35 +0200
    2011-07-05 20:23:35 +0200:
    2011-07-05 20:23:35 +0200:
    2011-07-05 20:23:38 +0200: Verify and Repair volume “Time Machine-sikkerhetskopier”
    Starting repair tool:  2011-07-05 20:23:38 +0200
    2011-07-05 20:23:40 +0200: Invalid content in Journal
    2011-07-05 20:23:40 +0200: Checking Journaled HFS Plus volume.
    2011-07-05 20:23:43 +0200: Detected a case-sensitive catalog.
    2011-07-05 20:23:47 +0200: Checking Extents Overflow file.
    2011-07-05 20:23:54 +0200: Checking Catalog file.
    2011-07-05 20:41:30 +0200: Stopped by user
    Repair tool completed:  2011-07-05 20:41:33 +0200
    2011-07-05 20:41:33 +0200:
    2011-07-05 20:41:33 +0200:

  • A lot of users with white screen after lcd replacement!

    Hello!
    So i have a macbook air with a broken hinge.. replaced the screen assembly as in the guide on ifixit. All ok, but after replacement the screen is white with light vertical stripes. Now i have done some research and found out there are a lot of users with the exact same problem but none with a solution.
    I think the reason why the screen turns white (most of the times) is because of the lcd modelnr en most importantly versionNr! The lcd model of the macbook air original is: B133EW03 but there are 4 versions of this screen: 0,1,2 and 3 respectively. In this link (page 3)http://www.ttsystem.ru/data/B133EW03_V1_Others_0204.pdf you see V1 is an upgrade of V0, in the way that the EDID codes have changes and so the OS has to send different codes to the lcd for it to 'understand'. I couldn't find the exact changes in V2 and V3 but i'm guessing it could be similar.
    So my question is could this be possible?? is it possible or does anyone know you need the exact same lcd screen (model en version) when you replace your lcd screen?
    Another very strange thing is that my macbook air shows some discrepancies:
    The bottom case of my macbook air says A1304 and the serialNr off course. But the motherboard shows the A1237 model..Step 14! (In this ifixit guide http://www.ifixit.com/Guide/Installing-MacBook-Air-Models-A1237-and-A1304-Displa y-Assembly/855/1
    Also OSX gives me the data:
    MacbookAir 1,1
    1,8ghz core 2 duo 64gb ssd (which isn't a a1304 model..)
    but the same SerialNr!
    When i check the specs online using the serialNr i can see it's made in week 50 of 2008.. in my opinion it's impossible it's a a1237, because apple introduced the a1304 in october 2008..

    I had the same problem with the LCD after replacing hinges and could not figure this out. 
    To solve the issue, I bought another A1237 of eBay that apparently had no HD/SSD, but it arrived with a swollen battery.  I removed the bad battery and replaced and moved SSD over and "Voila"...it amazingly light up...........

  • After replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?

    after replacement of my hard drive iPhoto is no longer compatible with my lion software - why ?
    any suggestions on how to fix this ?

    what version of iPhoto are you using? i can't begin to answer that - it is no longer listed in my applications & has only a shadow of its icon in the dock
    what version did you have before the drive replacement? same answer
    what system version are you running? 10.8.5 - the one i was using when the hard drive died
    what exactly do you see when iPhoto attempts to launch? -it doesn't attempt to launch - i get a message saying "You can’t use this version of the application “iPhoto” with this version of OS X. You have  OS X 10.8.5. The application requires OS X 10.9 or later".
    what have you tried? wringing my hands ! i daren't try anything after the hard drive crash
    where is your library located? there is an iPhoto library folder on my desktop with random photos & albums - not all - put there by me - i vaguely remember a problem with iPhoto when i upgraded from snow leopard
    did you apply any updates or upgrades just prior to the problem occurring? after the drive replacement i uploaded saved data from a week old back up and found iphoto looking somewhat sick - no updates were offered in software updates
    are you running a "managed" or "referenced" library? i'm afraid i do not know what that means
    what type of Mac? a macbook pro
    how much free space on your boot drive? about 380 GB
    thank you very much for your questions - i hope i find some answers 

  • Not solved with Blinking Folder with Question Mark after Erasing Hard Drive

    Before asking, I found someone had asked exact the same question, but that was actually an unsolved thread.
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Level 1(0 points)sdc3gJul 5, 2013 6:24 PM Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings
    Re: Blinking Folder with Question Mark after Erasing Hard Drive to try to restore to Factory Settings 
    in response to Niel
    Thanks for the reply, held command+R again and it is trying to pick up WiFi, but it's not picking up my network and won't accept the password even when I try to put it in manually. Any thoughts on that?
    Me too had tried the command+R and failed to manually connect to my network. Can anyone help?

    Well, it was solved. I shifted to other place and tried other WIFis. One of the WiFi had the 2002f problem and another was fine, so the reinstall worked smoothly eventually.
    On the apple support page it says that Supported network configurations and protocols includs both WPA/WPA2, not matter what they are, but it might not be true.

  • The g, h and backspace on my keyboard are not working even after replacing with a new one.

    The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
    ...am waiting for a QIUCK RESPONSE

    How does a usb keyboard attached externally work?
    You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too. 

  • Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD

    Attempting to reinstall Adobe Photoshop Elements on iMac with OS 10.7.5 after replacement of the HDD under iMac 1TB Seagate Hard Drive Replacement Program.
    Would appreciate any help navigating the installation failure message. THANKS!

    Thanks for your response! Here's the error message -
    "The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance."

Maybe you are looking for