Iweb 08 "adding a personal domain

I've got I life 08 on my powerbook and I'm trying to add my personal domain by following the instructions and I can't get by this message...
The domain names you entered don't match. Please try again
It says to enter my domain and confirm it so I've tried that many times as well as rebooting then trying again etc. I've opened my domain and was paying for support through ipowerweb but I'm trying to convert to mac now. Has anyone else seen this error?

This is what the screen looks like when the error occurs!
Add Personal Domain (1 of 2)
The domain names you entered don't match. Please try again.
Enter your domain name below and click Continue.
Domain Name
www.ralstongolfclub.com
Confirm Domain
www.ralstongolfclub.com
Hmmmmmmm. I am new at this but have ran a site for 5 years through ipowerweb without many problems.
Thanks in advance to anyone that can help.

Similar Messages

  • Problem with iWeb after associating a personal domain name with my MobileMe

    I think I did this by the book. I associated my personal domain name with my MobileMe account, then changed the CName pointer at GoDaddy to MobileMe (MM), then went back to MM and hit 'Done'. iWeb now lists my MM account as 'My account name (personal domain name). It took a little while for the DNS pointer to propogate, but now I can go to a browser, type in my personal domain name, and MM delivers my iWeb website as I wanted it to, apparently from my domain, not web.me.com. The problem is, as soon as the DNS propogated, MM delivers my MM site OK, but iWeb can't find the files for it anymore. All my pages immediately went red (unpublished) when I tried to update the site, and any attempt to Publish gives me this error "iWeb couldn’t connect to MobileMe. Make sure your Internet connection works and try again." I'm cable connected to an ADSL router, and Airport connected to a cable router, and neither service has dropped out. I've rebooted, and retried, and the website is up under my own domain, so GoDaddy and MM both got it right. What did I do wrong? Thanks, someone... anyone?

    This is now sort of resolved, but not very satisfactorily. One of the trainers at my local Appple Store found an old support issue in the archives going back to 2008, which blamed security settings for update problems. Coincidental with associating MobileMe with my personal domain, I had checked the privacy box and added an ID and PW to the site. That was the problem, not the personal domain, that was preventing iWeb from finding my MM account. Uncheck that box and my site happily updates. Of course, now I have a site that I cannot make private. In this case, not a show-stopper, but disappointing. I have reported it as a bug in the latest version of iWeb. Thanks for your help.

  • Publishing iWeb site to .Mac personal domain

    I set up Personal Domain on .Mac & added the cname on my account with Network Solutions & are waiting for the changes to take effect now. But I have 2 sites in iWeb. How do I get the right site on the personal domain.

    Hi again,
    My Problem is that it is not clear how to redirect mlwhall.com --> www.mlwhall.com
    Since CNAME is for aliases, I am not sure how to point mlwhall.com since that is the root name. The A (host) will only take an IP address, so I assume that if I am going to do this I need to do it in the CNAME section (pinging did not get me a useable IP address). I cannot believe I am the only person that wants to do this -- setting up domain forwarding does not seem to work either
    Is it not common for people to want to have www.blah.com and blah.com to resolve to the same place?
    ----Martin----
    And yes -- I meant to say that I made a CNAME alias for www that points to web.mac.com as pointed out in the personal domain instructions.

  • Publishing iWeb Site on a Personal Domain

    Hi,
    I'm having a lot of trouble publishing my site to a personal domain. I am using iWeb 08 and am publishing via MobileMe and domains.com is my host. For some reason, I just can't get the site to publish on my personal domain. My personal domain is registered on MobileMe and the CNAME is programmed into the domains.com DNS management area. What's going on that's not allowing it to appear?? The site is just blank...please help!

    Works fine for me too, but not if you place the www before your domain name. If you want this too, you may need to go back to your DNS settings and set up a new CNAME for your domain name that includes the www part too, but only if you want to.

  • IWeb and using my personal domain name.

    I have never published a web site before and this is a first time for me.
    With having iWeb version 8 installed I have created a website with photos etc.
    I have also registered a domain name to use my personal name. This is the one and only web-site I have published.
    The name has been set up for forwarding with the CName as web.mac.com with the host site in the section of ‘Masked forwarding’
    And in my personal settings in the account manager on .Mac the correct name has been entered to use for my iWeb site. For example www.anthonyjhowe.com which is my registered name.
    In the iWeb application under file I have published all my pages to .mac.
    In my iDisk folder on the Internet there is a folder named “web/sites and inside this folder, there is my gallery but also a folder named AnthonyJHowe, this has all my pages I created in iWeb.
    There is another folder named “iWeb. But inside this there is one file named sites.rss, and that is all. This is replicated on my iDisk on my desktop.
    Now in iWeb when I publish all to .Mac I receive a message that my site can be visited using my domain name and would I like to visit or announce the site. This lists all the pages I have published.
    When I click on visit, it takes me to the .Mac welcome screen and not my site.
    That’s how far I have got. It’s been over 72 hours since I registered the domain name.
    I have searched and read some posts about this but I don’t seem to go any further with this.
    Could you give some suggestions please and perhaps point me in the right direction?

    This iWeb’s Domain Forwarding feature that has you publish the site to your .Mac account and then uses your domain name as an alias for your Web site should be relative simple procedure, but with quite a lot of posts on this subject, including myself is not easy to set up and it should be as iWeb 08 is a consumer product. There is little information about this at present.
    Getting in touch with the registrars can be quite daunting and eventually you may get one person in the office that may be able to help you. Apple's information to suggest you contact the Registrar of you domain host to create a CNAME does not help an ordinary consumer either.
    My issue with the Personal Domain feature is that it places the burden of making the switch on the user, and it is far from a straightforward process and my unfortunate lack of experience has led me to ask the question in the first place.
    This discussion forum seems to be the only place that gets close to helping you out.
    As it stands, the instructions from Apple are extremely vague, mostly advising you to contact your domain name registrar. They give no indication of what to expect or do if things that aren’t working correctly. And that's why a lot ask the question in the first place in this discussion forum. However those who have experience in dealing with these matters may not always see your post.
    I can usually work out problems to do with computing, but to be honest this one has me beat and yet it should be and probably is a simple procedure to carry out. But there is either very little information to carry out the procedure or confusing information elsewhere that makes the mind boggle.
    The link below is the only information I can find from Apple to help you, unless someone knows of other information.
    http://docs.info.apple.com/article.html?artnum=306195

  • Uploading iweb layout/site to personal domain

    I'm using FireFTP through Firefox to upload my site designed on iWeb. However, once uploaded and I visit my site images don't show up, fonts are wrong and some text doesn't show.
    I'm getting really frustrated, I've tried the other free FTP's and they don't work either. How do I fix this problem?

    Will I just send my whole "site" folder to my public folder at my personal domain?
    You send the folder created by iWeb which has the same name as you gave your site inside the iWeb app, plus the index.html file which iWeb created alongside that folder.
    How will I update each day?
    By publishing again to a folder and uploading again via ftp.
    (Can I set up iWeb so that when I click "publish" it will update my personal domain?)
    No. If iWeb could do that you would not need an ftp program to start with.
    I was planning on using some wordpress plugins to modify my site.
    No idea, but generally speaking modifying iWeb to add stuff requires manual editing of the html after publishing and redoing it every time you republish.

  • Adding a personal domain name

    I want to add a new personal domain name in my mobile me account, but through all the tutorials the ADD button does not appear.  Can anyone advise as to why?

    With MobileMe being discontinued next June 30th you might want to start looking for a new web host to publishs your websites to.  That way you can have multiple domain names all accessed the same way.
    This may be of help to you: Life After MobileMe, particulary the tutorial: 28 - Using HostExcellence.com with iWeb.
    OT

  • IWeb and 123-reg personal domain difficulties

    I have published before using iWeb but have now recently bought a domain name with 123-reg. I have changed my CNAME with 123-reg but cannot publish my website using iWeb. It just says:
    Publish Error - There was an error updating MobileMe.
    What am I doing wrong? Is it massively obvious? I've waited more than 48 hours.

    Try the following:
    delete the iWeb preference file, com.apple.iWeb.plist, that resides in your Home() /Library/Preferences folder.
    go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
    launch iWeb and try again.
    OT

  • How do I publish from iWeb to my personal domain

    Can someone tell me the exact steps I have to take to modify iWeb to publish my albums to my Personl domain. I found some instaruction about going to my domain cPanel and adding a new CNAME. The problem is that it asks for a NAME and a CNAME and I don't know what to put there. Now do I know to modify iWeb to replce the std "gallery.me.com"   I don't know what to change that too.
    My cPanel  asks for...
    Add a CNAME Record
    Name:
    CNAME:
    If my domanname is www.peter.com, what do I use in the name field ?  What should the CNAME be also ?
    This is supposed to, after correcting iWeb, allow and iWeb publish to my personal domain.
    Can anyone help me withthis?
    TIA,
    Peter

    Your original post did not in fact state anywhere that you had a MobileMe account.
    Also, you seem to be getting a little confused here with terminology which does make a difference.
    Rather than a domain, what you in fact have is a domain name that is registered through hostpapa.com - it is not hosted as you say, but registered with them.
    Also, iWeb will not and does not 'publish directly to your own domain'.  iWeb cannot publish to a domain name or anything - you need a hosting account to be able to publish a website - do you have this?  If not, then you will need to purcahse hosting too.
    So, if you want to publish your site directly to hostpapa instead of MobileMe, then CNAME is NOT involved in this at all - you DON'T need it.  CNAME is only a method of forwarding that you would use to forward your domain name to web.me.com when published on MobileMe.  If you do not want to use MobileMe any longer, then you don't need this.
    So you say that you have registered a domain name with hostpapa?  Do you also have a hosting account with them too if they provide hosting?  If not, then you need to purcahse a hosting account from either them or some other company that provides hosting. 
    When you have your hosting account and assuming that you are using iWeb 09, open iWeb and then click on your site name and your publishing options with become available in the drop down menu - rather than picking publish to MobileMe, select the publish to ftp option instead and fill in your details such as ftp name, username and password and then upload your site after testing your connection.
    If you are using iWeb 08, then you'll need to publish to a local folder and use Cyberduck or Yummy ftp etc to upload your site to your server instead.
    CNAME is not involved and if you purcahse hosting from another company other than hostpapa, then you will probably have to alter your nameservers so that they point to where your site is now hosted.
    If you want to ditch MobileMe, then you don't need to use CNAME at all - it just isn't involved here.

  • Can I make the personal domain go away?!

    Problem: I played with the personal domain thing in the 2.0 phase of iWeb, and decided to wait until the update fixed things. I USED to have my GoDaddy URLS point to each of my various iWeb sites, which they still do. However, when I publish now, iWeb loads to that personal domain, and I can't make it stop. I never changed the CNAME or anything on my GoDaddy site, just went on .Mac to add a personal domain to the list.
    Can I make iWeb STOP trying to load to that personal domain? I deleted it from the .Mac page, but iWeb still shows it at the bottom of the pane as a green dot followed by my email (domain). Now EVERY site loads to that domain, followed by /sitename.
    Old domain: www.swatphysician.com pointed to
    Old iWeb site: http://web.mac.com/macdaddymd/iWeb/swatphysician
    New iWeb is www.swatphysician.com/swatphysician
    I tried republishing the entire thing to .Mac after I deleted that personal domain from .Mac, but it did the same. What I want to do is go back to the old way... use my GoDaddy redirect to point to the various sites by their own personal domain names (www.76whs.com, www.76lancers.com, etc.).
    Can I make iWeb forget it ever heard of my personal domain?!

    I explored the possibility of setting up the personal domain feature, but was unable to get the support needed from my host to ensure that it would function properly. I'm considering simply using web forwarding to send people where they need to go. I added and removed the personal domain information from within my .Mac account and it had nothing to do with iWeb. Maybe I'm clueless on this, but that was my experience.
    Anyone who has previously been pointing to their .Mac iWeb site will discover that all the addresses will change after upgrading to iWeb 2.0.1 version. At least, that was my experience. Blog entries have a completely new method for naming pages (old pages are given new URLs based on the new naming system). The entire site was under an iWeb folder (as you pointed out in your message). The new sites are located directly under your .Mac account name.

  • Remove Personal Domain from MMe

    I have added a Personal Domain to a MMe account. However, the domain transfer process is going to take a few more days, because of the grace period built into the process. As soon as I added the personal domain name in MMe (I have not clicked the "Done" button.) all of the page icons in iWeb turned red, indicating they needed to be republished. I have not republished. I can still get to my site using the web.me.com/username address, of course. I have made a a number of changes that I would like to publish.
    Do I need to wait until the domain transfer process has been completed? I have not done anything to point the domain name to the MMe site at either the previous or future registrar.
    Can I remove the Personal Domain from MMe until the domain process has been completed, and manage the site as before? If so, how do I do this?
    If I go ahead and republish with the domain name in the MMe account (before the transfer process has been completed, and with the personal domain still associated with the account) can I still access it using the web.me.com/username address?
    Thanks...

    Log into your MME account and go to the Personal Domain option. It has remove on the right side and just click on that to remove it.
    Whether your domain name is linked to your site or not, you can always get to your site by using the url web.me.com/username/sitename.
    If you are using iWeb, then your site will always only ever be published to your iDisk and MME and not your domain - it is only an illusion because your domain name is forwarded to your MME account.

  • Help with personal domain and GoDaddy

    I have created a website using iWeb.
    I have added my personal domain to my .mac account
    I have changed the www CNAME to point to web.mac.com (at GoDaddy)
    If I enter www.mydomainname.com to takes me to my parked site.
    If I enter mydomainname.com (without www)it takes me to my website.
    Any ideas on why this is happening and how to fix it?

    I have been trying for the last week and a half to put my iWeb on Godaddy and am having a terrible time. How did you do it???????? love, Mary
    If you are still talking about uploading to Godaddy via FTP, please respond in your earlier thread.
    http://discussions.apple.com/message.jspa?messageID=6467513#6467513
    This discussion is about something totally different.

  • How to cancel "set up personal domain"

    Does anyone know how I cancel the "set up personal domain" in iWeb 2.0? I changed my mind halfway through the set-up process (I clicked Personal Domain in my Account Settings, entered my domain name, but haven't defined my CNAME on my registrar's website). Now it looks like I can't access either my iWeb files OR my personal domain name! Thanks for your help!
    Sharon

    Help!
    I am struggling to get my domain name set up.
    Domain: www.west3.org
    .Mac website: http://web.mac.com/mrcommitment/West3_residentsAssociation/Welcome.html
    CNAMe record set up with Dotster as
    web.mac.com.west3.org CNAME www.west3.org
    All is set up as above and I've waited the requisite time, name servers are as required by Dotser
    BUT no access to via personal domain.
    Any advice welcome
    Ben

  • Adding mobileme gallery content in iWeb with a personal domain

    I've been building gorgeous looking pages in iWeb this year which I have attached to a personal domain.
    I'm having trouble adding a movie that I have published on my mobileme gallery as widget is telling me there is nothing available. Could this be because I have iWeb pointed towards my own domain even though it's hosted by mobileme?
    I'm confused and really want to add this video as something over than through a hyperlink.
    Any help appreciated.
    Thanks,
    Paul.

    Paul:
    If you have a MMe gallery that you want separate from the others but still have viewable in an iWeb site and page set its setting in iPhoto to be hidden from the rest of the gallery:
    Click to view full size
    Visit the gallery online and copy it's URL address. Add that address to iFrame code in an HTML snippet as I've done in this demo page: MobileMe Galleries and Quicktime Movies (the code is shown on the page). You can set the gallery to disiplay in any of the availablemodes, grid, mosaic, etc., by using the URL for that mode.
    The visitor can view the gallery but will not be able to go to your other galleries. Just a way to post a single gallery to your web page.
    OT

  • Iweb was not publishing changes to my personal domain name, AND now it won't let me publish at all!

    Hi, i am new to the apple community so bare with me whilst i struggle to explain...
    I recently purchased a hosting site through netregistry.net.  www.toyboxtherapies.com.au I spoke to them to allow the changes to the CNAME through their site.They did this for me. Once they did this my original 3 page site that I had published to mobileme came up. 
    When i added changes to the site, none of them were published even though iweb said they had been. I gave the site 48 hours (well, i gave them a week) to update the changes.
    I went to double check today and now iweb wont let me publish to my domain name at all, it just lists File>Set up personal domain on mobile me.
    When I log into mobile me my domain name is there. I have tried removing t and setting it up again, but nothing is happening with iweeb. Still the same problem.
    Please help! I am trying to get this business off the ground and its all very frustrating!

    This is what I see in a Lookup :
    ; <<>> DiG 9.6-ESV-R4-P3 <<>> www.toyboxtherapies.com.au cname +multiline +nocomments +nocmd +noquestion +nostats +search
    ;; global options: +cmd
    www.toyboxtherapies.com.au. 3600 IN CNAME web.me.com.
    It means that the CNAME record points to MobileMe.
    So go where you manage your domain and delete the CNAME record and change the  A-record(s) to point to your new webhost.
    It takes some time for the changes to propagate thru the internet. A minimum of 20 minutes.
    Note that when you publish to MobileMe, iWeb recieves the domainname information from the MobileMe server. Only when you publish elsewhere you have to enter the domainname. But if you do not change the settings where you host your domainname, it still directs to MMe. But that's beyond iWeb.

Maybe you are looking for

  • Condition Type value -Zero

    Dear all, One of my Requirment will fullfill...by entering the Condition value ZERO(0) But if i try to enter the value Zero..the value is disapperring. Thanks in advance regards raj.

  • Caught between Imovie 09 and FCE

    I am caught in between these two programs. I am a beginner and only need the basic editing tools available in Imovie, yet I have an AVHD camcorder and want to import footage at maximum resolution. I have been importing at full resolution and exportin

  • Need Sample for Essbase Triggers

    I would like to set up some Essbase triggers on a database (when a value for a particular member is not #Missing, I'd like an email sent to me). I have looked through alot of documentation and in all honesty, it leaves alot to be desired. I'm setting

  • FMLE 3.1 Osprey 440 Video Hardware Acceleration Warning

    Hello, I have FMLE running on Windows 2003 Server with an Osprey 440 video capture card. Everytime I run FMLE, i get the following message: "Video Hardware Acceleration Warning" "The video card's hardware acceleration level is set too low. Open the D

  • Shape fill colour preview

    Hi , I have been searching around the setting and the net and no luck , wondering how to turn off fill clour preview of a vector shape before the path is closed . I am in Photoshop CC. Thanks