IWeb 08 blog posting issue using Cyberduck

Tried to upload a blog page to my website and get the words "blog summary widget" where the content should be. I see it's been noted as a problem in other MAC communities but I haven't yet read a satisfactory resolution.

Is the blog page online now? I don't see it if it is. I don't have a lot of experience with iWeb blog pages (or any blogging pages for that matter) but do know these are the iWeb features that will be lost using the iWeb blog on a non Mac server:
Features Unavailable When Publishing to a Non-Mac Server:
◼ Password protection
◼ *Blog and photo comments*
◼ *Blog search*
◼ Hit counter
From iWeb 3's Help file
When opened locally, the file is fine
If the blog page displays OK when you publish to a folder and look at it locally then the issue is with the uploading. What are you using for an FTP client? If it's not the free Cyberduck you might try downloading and using it. It's well recommended here in the forum.

Similar Messages

  • FBCJ Posting issue using BAPI

    Hi All,
    I have a requirement to Post Cash Journal Document using FBCJ tcode.
    For that I used 'BAPI_CASHJOURNALDOC_CREATE' . This bapi helps to create Cash journal entries and Saves it but it does not post it.
    For Posting I tried to use FM 'FCJ_POST_ALL' but it also does not post the mentioned document.
    Withholding tax should not to be considered in my requirement.
    I searched SDN  a lot but couldn't get any proper solution yet.
    Please suggest.
    Regards,
    Amit

    Hi,
    After creating or saving cash journal document number,
    To post use FM FCJ_POST_ALL
    pass parameters as for reciepts I_TYP = 'R'
    payments I_TYP = 'E'
    and other required parameters
    Regards,
    Sanjay Gogikar

  • How to post multiple images in one blog post using iweb

    Hi
    I would like to post multiple images in a single blog post. When ever I add a second or third image in the "entry" section of iweb, it does not show up in the blog post on the homepage of the blog. does anyone know if it is even possible to have multiple, separate images in one post, and if so, how.
    Here is a link to my blog: http://www.hoopography.com. You can see how there is only one image. I I want to talk about multiple items, I need to create an image in Pages and put them all together. I would really like to break out of the one box (placeholder) mold. I feel so constrained in iweb right now. I think I have done a lot with my blog, but I am always looking to learn more about iweb and improve my blog. Thanks for any help!!!

    what's the url of your blog? I'd like to check it out. I'm always interested in learning more about iWeb to improve my blogs. Mine are: http://www.hoopography.com and http://www.wnysportscards.com

  • IWeb Stops Midway Through Blog Posts

    I've tried using iWeb 09 a couple of times. I have a large number of blog posts, and it gives an error message that it is unable to create a page when it reaches this page: http://web.mac.com/tehart/JurassicRants/Blog/Entries/2007/9/15_A_ForbiddenPleasure.html. It then quits publishing.
    The site publishes fine with iWeb 08, but I've been unable to use '09 for anything.

    HI,
    I responded to you over here: http://discussions.apple.com/message.jspa?messageID=11702815#11702815
    The Facebook issue could be cookies.
    From your Safari Menu Bar click Safari/Preferences then select the Security tab. Click: Show Cookies
    Delete all Facebook related cookies, click Done.
    *Relaunch Safari* and try uploading images to FB. If that doesn't help, you may need to uninstall the FBplugin then reinstall new.
    Go to the FB Help Center for help with that here: http://www.facebook.com/help/?search=plugin
    You have to be logged into FB to access the FB Help Center.
    Carolyn

  • Path issue leaving me unable to add blog post content in design view

    Hi guys,
    I am unable to add blog post content in design view when a template is applied to my blog. BC support have told me they fixed the problem by making minor changes to the paths of the css and javascript files and then told me to post on here for the solution.
    When I call the files using <link rel="stylesheet" href="/css/custom.css" /> everything displays perfectly but in BC I can't add blog post content in design view. I can edit in html but this isn't ideal for clients to update the blog.
    If I change the paths to <link rel="stylesheet" href="css/custom.css" /> it fixes the problem and I can then edit blog content in design view but all blog pages that are in folders display incorrectly. Only the main blog page display properly.
    I'm sure the answer is simple but I can't find it so any help would be greatly appreciated. Thanks
    Pete

    I took a look at your page URL and can't find any CSS issues or styles that would directly affect you editing/adding content to a blog post via the content editor.
    Make sure you either clear your cache or try in another browser to see if the problem is localized to your current browser.
    If you still have the problem can you link me to a screencast (you can use Jing if you don't have a screencast program: http://www.techsmith.com/jing.html) of what you are experiencing?

  • Is there a video tutorial for using cyberduck and iweb?

    So, is there a video tutorial for using cyberduck and iweb to upload to a website? The written instructions on iweb are not specific enough.

    Might be worth posting that in the iWeb forum.
    http://discussions.apple.com/category.jspa?categoryID=188
    This is the iPhoto 09 forum.
    Also, have you tried searching with google?
    Regards
    TD

  • Automate iWeb Blog Posts from Mail

    Would it possible to use Automator to fetch text from an email with a keyword or from a certain sender that would then be put into a blog post in iWeb? I know that there is an "iWeb Action Pack" for Automator that gives it similar functionality when adding pictures or movies.
    I ask because I'm looking to be able to post blog entries from a Windows computer at on the go or elsewhere. Does that seem feasible? If not, why not? If so, would you please suggest a reference I could use?
    Thanks in advance!

    i have the same problem. and i also want to add a share button on every post so people can share it through their status on facebook. do you know how to do it? anyone?

  • Blog Post Layout issue

    I am creating a blog for a new website. I am currently using the default layouts. When I add a post as a test it shows up perfectly when I use the preview mode. When I check it via the website the blog post list is fine but when you open the blog post page it just the text etc with no CSS. What would be causing this? Is this something I have inadvertently done or is a system issue. I have not had this problem before with BC Blogs. As far as I can see the relevant CSS links etc are on the page.
    Any suggestions??
    Thanks
    Cordie78

    Hi Cordie,
    Sounds like there's no template assigne to the blog. Make sure you check that http://alexpavelescu.worldsecuresystems.com/Jing/2013-05-29_1520.png
    Kind Regards,
    Alex

  • Post Goods issue using bapi_goodsmvt_create

    hi,
    Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?

    hi,
    *& Report  ZRPT_SUB_KO01GOODSMOVEMENT
    REPORT  ZRPT_SUB_KO01GOODSMOVEMENT.
    PARAMETERS : P_BAG(17)  TYPE C,
                 P_ZZORG LIKE zaUFK-ZZORG,
                 P_MATNR LIKE MARA-MATNR,
                 P_WERKS LIKE AUFK-WERKS,
                 P_WERK LIKE AFPO-PWERK,
                 P_DATE LIKE MKPF-BUDAT,
                 P_LGORT LIKE GOITEM-LGOBE.
    DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
      DATA : WA_BDC_DATA TYPE BDCDATA .                "work area for bdc data
      DATA : T_XMSEG TYPE   MSEG.
      DATA : T_XMKPF TYPE MKPF.
      DATA : V_BAGS1(17) TYPE C.
    DATA : BEGIN OF WA_MB1B,
           ZZGCODE TYPE ZMIGO-ZZGCODE,
           ZZGBAGS TYPE ZMIGO-ZZGBAGS,
           WERKS TYPE AUFK-WERKS,
           LGORT TYPE VBRP-LGORT,
           ZZORG TYPE zAUFK-ZZORG,
           END OF WA_MB1B.
    DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
    data : v_date(10) type c.
    DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
           T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
           T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
           T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
    DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
    DATA : BEGIN OF S_MARA,
           MEINS LIKE MARA-MEINS,
           END OF S_MARA.
    DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
    *FORM GOODSMOVEMENT TABLES T_RETURN
                             USING WA_MB1B LIKE WA_MB1B.
    SELECT SINGLE  MEINS
                   FROM MARA
                   INTO S_MARA
                   WHERE MATNR = P_MATNR.
       CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
        T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
        T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
        T_GOODSMVT_CODE-GM_CODE = '04'.
        WA_GOODSMVT_ITEM-MATERIAL =      P_MATNR.                    "'000000000000001556'.
        WA_GOODSMVT_ITEM-PLANT  =        P_WERK.                     " '1000'.
        WA_GOODSMVT_ITEM-STGE_LOC =      P_LGORT.                    " '0001'.
        WA_GOODSMVT_ITEM-MOVE_TYPE =     'Z42'.
        WA_GOODSMVT_ITEM-VENDOR =         P_ZZORG.                   "'0000100224'.
        WA_GOODSMVT_ITEM-ENTRY_QNT =      P_BAG.                   " '1'.
        WA_GOODSMVT_ITEM-ENTRY_UOM =     S_MARA-MEINS.
        WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
        WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
        APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
    CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
    EXPORTING
          GOODSMVT_HEADER          = T_GOODSMVT_HEADER
          GOODSMVT_CODE            = T_GOODSMVT_CODE
    IMPORTING
        MATERIALDOCUMENT           = V_MATERIAL
    TABLES
          GOODSMVT_ITEM            = T_GOODSMVT_ITEM
    RETURN                        = T_RETURN.
    BREAK shailajaa.
               EXPORT t_return  to MEMORY ID '123'.
               EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
                CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
         EXPORTING
           WAIT          = ' '.
    *ENDFORM.

  • How do I move my blog posts from iWeb to Wordpress?

    I want to move all my blog posts from iWeb to Wordpress. Is that possible and how?

    Depending on how many posts you have, it may be best to copy and paste them into Wordpress. I don't know for sure, but I dought if there is any process that will do that automatically for you. I would have your iWeb blog (edit Mode) window open and then Create a new blog in Wordpress. Copy the iWeb title/paste into Wordpress - Copy the iWeb blog text/paste into Wordpress. It should go fast once you get the first one done because you'll do the same for all.  Hope that helps.

  • Show first paragraph of blog post using liquid

    The legacy tag {tag_blogpostbodypreview,Text} allows to have a preview of the blog post. There is no similar possibility in the new liquid markup except for the | truncate filter. But this thing is very dangerous, for if you insert code which tags are then truncated before being closed it can detroy the whole layout of a page. Take a table for
    example or an a-tag truncated right in the middle. How can I have only my first paragraph or a short teaser being shown in a blog post list? Any help would be appreciated!
    P.S. in the liquid markup there is a | truncatewords filter, but this one seems to not be included to BC liquid yet?
    Dennis

    That is a bad idea because it will remove any images and formatting that you will want to keep from your content.
    Original tags will and do still work in your layouts. If you want the preview of the first paragraph just still use the tag
    There are several liquid filters not working in BC, not sure if they will be implemented at the moment. BC have been on the quite front as they have been doing the migration.

  • How to design blog post using dreamweaver ?

    I have a blog post - Tamil nadu 10th result and I want to design the post using the dreamweaver to create good design. How to do it ?

    Your blog is on Google's Blogger which uses XML templates.  If you want to change the look of your blog, use a different Blogger Template.  Unfortunately, DW isn't going to be much help with this since you must use the Blogger Dashboard to change templates, content, widgets, etc...
    Blogger Templates
    Edit the HTML of your blog's layout - Blogger Help 
    Nancy O.

  • Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell"

    Just FYI, new blog post "Deploy BranchCache Content and Hosted Cache Servers Using Windows PowerShell" at
    http://aka.ms/le85n3
    Thanks -
    James McIllece

    Great to see new BranchCache content out there!
    We created a BranchCache info page to try to get all of the relevant info into one place for V1 and 2
    http://2pintsoftware.com/microsoftbranchcache
    thanks
    Phil
    Phil Wilcock http://2pintsoftware.com @2pintsoftware

  • Getting my blog posts from IWeb interfaced with Facebook

    How do I get my blog posts, created on IWeb, and through Networked Blogs to sync with my Facebook page? I cant seem to get the individual posts available to post in my Facebook status bar. No posts from blog are visible...any ideas?

    i have the same problem. and i also want to add a share button on every post so people can share it through their status on facebook. do you know how to do it? anyone?

  • The icons of the blog posts that I visit do not change to show my visit. eg. I used to be able to see the orange blogger symbol when I visited that blog post.

    I subscribe to blogs via RSS (whatever that means) and new blog posts show up in my bookmark menu ....... they show up with a grey unassuming icon at the beginning of the blog post bookmark.
    Months ago the appearance of the bookmarks would "change" when I visited the post ..... eg. for blogger posts the icon would turn into the traditional orange blogger symbol.
    But for many many months now the icons don't change with the visit and it's getting difficult to remember if I've visited that blog post or not by looking at the bookmark itself.
    How can I get the bookmark to update/refresh when I visit a blog post?

    I see a faded RSS feed icon for live bookmark items that turn into the website's favicon after having visited the link.
    There may be a problem with the favicons if you get the generic default icon instead of the website's favicon.
    You can try to repair the places database with this extension:
    *https://addons.mozilla.org/firefox/addon/places-maintenance/
    See also:
    *http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    You can to remove all stored data from that domain via "Forget About This Site" in the right-click context menu of an history entry (Show All History or History sidebar) to see if that will reset the favicon if the above posted steps didn't help.
    Using "Forget About This Site" will remove everything from that domain like bookmarks, cookies, passwords, cache, history, and exceptions, so be cautious if you need to keep passwords or other data from that site.<br />
    You can't recover from that "forget" unless you have a backup of the affected files.<br />
    *https://support.mozilla.org/kb/Backing+up+your+information
    *https://support.mozilla.org/kb/Recovering+important+data+from+an+old+profile
    It doesn't have any lasting effect, so if you revisit such a 'forgotten' website then data from that website will be saved once again.

Maybe you are looking for