Iweb '08 - frustration with missing content

if anyone can help me, i am slowing going crazy with the frustrations that i have had since i upgraded to iweb 08 about 2 weeks ago.
firstly i have had to rebuild my website twice, as the domain file didn't exist at that point.
so my issue is this - my website is built and looks fabulous, however each page in the iweb program constantly has missing content, and i have to continuously re-add everything back in - there are "question marks" all over where the content SHOULD be and where IT WAS. this is causing so much more work for me, and i just don't have the patience to keep screwing with the program.
if anyone knows how i can fix this problem, please respond!!

After you installed iWeb '08 and ran the updates, did you restart your Mac?
Quit iWeb.
Delete the Preference file - Home Folder/Library/Preferences/com.apple.iWeb.plist.
Restart your Mac.
Run Disk Utility to repair permissions.

Similar Messages

Re-download purchased song with missing content

How do I re-download a purchased song which apparently completed, but download only contains 3+ minutes of song which is over 4??

Depending upon what country that you are in then try deleting the song from your iTunes library and then redownload it via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes. If you aren't in a country where you can re-download music or if it re-downloads in the state then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that song and use the 'Report a Problem' link.

Help with Adobe Content

I have installed Adobe Premiere by purchasing it and downloading it from Adobe's web site. I also downloaded all the content the same way, but everytime I start or go back to a project i get this message, "A reduced set of content (instant movie, themes, title and menu templates, etc.) has been installed". And it ask if I want to install the full content by inserting DVD or down loading. I have downloaded this , but how do I know if has fully installed or the content? Do I just click do not show me this again? I think I have it completely installed, but I am not 100% sure. Can anyone help. I am just trying to create some video slide showes, I am not an expeirce programmer.

I experienced the same thing. I have been using the program only two or three weeks and have been having problems with Instantmovies and themes rendering with missing content, such as intro videos that show up in the thumbnail preview animations. That problem is still unsolved and Adobe tech support says that's how the videos are supposed to render. Anyway, I also had the content failing to stay installed. I would install the content, close the program, reload it and the content would be there an usable. I could also close down the computer, reboot, and reload Premiere Elements and the content would be installed. So the installation was stable. However, when I would leave the computer on for a few hours and return and reload Premiere Elements, the content would not be installed and I'd get a message asking if I wanted to download and install it!
The files would be still there in their folders but the installation had vanished within the program.
Since no one had used anything on the computer while it was sitting idle, I wondered what was going on. I realized that the only thing happening in the computer was that my computer maintenance program, System Mechanic Professional, was scanning and mistakenly identifying the registry entries for the content installation as errors and automatically deleting them. I turned off the automatic error correction, then when it reported errors after reinstalling the content once again, I used System Mechanic's option of seeing what errors it found and choosing to have it ignore that registry entry in future scans. After doing that, I get no more uninstallations of the content.
Do you have a computer maintenance program running in the background?
I thought by completely uninstalling Premiere Elements 10 and reinstalling it and the content, new registry entries (to replace those that had been deleted) would be entered and my current problem would be solved, too, but it hasn't worked.
So I hope this helps you. And if anyone has any way to help with my problem, I have posted a separate thread about it a day or two ago. Please help!

Don't miss Thursday's Webcast: Security Scenarios with WebCenter Content 11

Learn how user authentication and authorization is now implemented in WCC 11g by attending this 1 hour Advisor Webcast!
Topic: Security Scenarios with WebCenter Content
When: September 27, 2012 at 16:00 UK / 17:00 CET / 08:00 am Pacific / 9:00 am Mountain / 10:00 am Central / 11:00 am Eastern
This one-hour session is recommended for technical and functional users who use WebCenter Content (WCC). This session will be used to explain how user authentication and authorization is now implemented in WCC 11g. Also the means that single sign can be used.
TOPICS WILL INCLUDE:
- How authentcation and authorization was handled in previous Content Server versions
- The WLS mechanisms now used to provide user access and content security
- External users and internal users
- Overview of the WLS ldap provider configuration
- How to differentiate Roles and Accounts
- WCC credential mapping -- not WLS credential mapping
- Single Sign on -- OAM only
- Saml and Kerberos
To register for this meeting:
1. Event address for attendees: https://oracleaw.webex.com/oracleaw/onstage/g.php?d=595760912&t=a
2. Register for the meeting.
Once the host approves your request, you will receive a confirmation email with instructions for joining the meeting.

Hi Everybody:
I've found the solution. It was necessary to fill the roles on the Front End. However, this step is not mentioned on the GRC 10.1 Security guide, only in 10.0.
Best Regards:
Caio

The newest version of iTunes is awful when it comes to Cloud syncing-file management. I'm constantly frustrated with what iTunes 'chooses to eliminate from my mobile device and settings aren't fine-grained enough to allow for real user control.

I'm endlessly frustrated with iTunes Cloud syncing, something that was supposed to make lenjoying my music easier. I routinely find that, though itunes and podcasts have been split, iTunes arbitrairily removes music files or in progress podcast in favor of 'new' podcasts. The settings are just not fine-grained enough to allow true user control and so we are instead subjected to 'Apple knows best' protocols. I understand and appreciate the level of exacting control Apple excercises over their ecosystem, however, more and more often I see them tightening control over things that should be user control while dropping the ball on aesthetic desisions made in producing their own software (see the hideous pull down tab for iTunes to access Podcast, TV shows, Music, etc.
I would like to see features like those in Mail and the Podcasting apps implemented in iTunes afor the management of content on mobile devices, for instance it would be great to swipe to delete files that you know longer want on your device, at both the album and song level. Another issues is the new pushiness of iRadio and iTunes Store, the app now seems to default to the iRadio page (versus the last page Albums, songs, etc. that the user was navigating, or in the instance of the iTunes Store push, if I doon't have all the tracks of an album i own on my mobile device 'complete my album' takes you to iTunes store rather than showing the 'cloud' download icon next to missing tracks. These are the tactics I expect from Google, not Apple (pushing commerce over quality user experience).
Fix these things Apple, please.

IWeb 3.0.4- missing fonts –Arial MT and Arial BOLD

When using iWeb 3.0.4 I'll get the missing two fonts –Arial MT and Arial BOLD– error messages on every single page. This font is NOT in use and I don't have a working version as replacement on my font folder. I don't want to buy it to get rid of the problem. Anybody knows how can i get ride of those without using pacifist ? Thanks.

I believe those fonts are Microsoft fonts. Do you have MS Office or any other MS software installed?
Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder. - you've already tried this.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
3 - launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
It is now generally acknowledged that iWeb, and iDVD, has been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
However, iWeb will still continue to work but without the following:
Features No Longer Available Once MobileMe is Discontinued:
◼ Password protection
◼ Blog and photo comments
◼ Blog search
◼ Hit counter
All of these issues can be solved with 3rd party options.
I found that if I published my site to a folder on my hard drive and then uploaded with a 3rd party FTP client subscriptions to slideshows and the RSS feed were broken. If I published directly from iWeb to the FPT server those two features continued to work correctly.
There's another problem and that's with iWeb's popup slideshows. Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
Click to view full size
However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone. How to is described in this tutorial: #26 - How to Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
It now appears that the iLife suite of applications offered on disc is now a discontinued product and the remaining supported iApps will only be available thru the App Store from now on. However, the boxed iLife 11 still available at the online Apple Store (Store button at the top of the page) and those still on the shelves of retailers will include iWeb and iDVD. Those two apps were listed in small, gray text on the iLife 11 box that I bought.
Personally, if I already didn't have a copy I would purchase one to have it for reinstallation purposes if ever needed.
This might be of some interest to you at this time: Life After MobileMe.
OT

Missing Content Found but no buttons

WHY???
I downloaded and installed as per http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html but I don't have any buttons.

Answered:
1. UNINSTALL ENCORE. Including preferences if you feel like it, although its not necessary.
2. REINSTALL ENCORE
3. Open the file noted in Ann Bens post above and drag each of the folders to REPLACE the content within the enclosing Encore application folder. If you are worried about this, first open one of the existing Library folders that was installed with the application and compare its contents with the contents of the same-named folder from the download. You'll see the same files, but dozens more.
Finally! We now have the missing content WITH buttons in the application.
By the way I know that uninstalling isn't necessary in most cases. The reason I did it was that I'd attempted a few times to replace those folders and still wasn't getting the buttons. What I discovered, and the reason why I decided to uninstall/reinstall, was that there was a greyed out "second set" of folders which was probably from one of the attempts to replace the original ones. So I'm only suggesting the above route if you've experienced similar frustration.

How can I have multiple WINDOWS (NOT tabs) with INDEPENDENT content?

How can I have multiple '''windows''' (''not ''tabs) with '''independent''' content?
I used to be able to open separate windows with Firefox, and the content could be completely different in each window. No matter what I did in any window, no OTHER window open at the time, nor any of the content therein, was affected. This is no longer the case and it is extremely frustrating for me.
I do ''not ''like tabs and do not use them. I prefer multiple windows plus I am so used to using them, for so many years now! But with v9.0.1 I suddenly can no longer do what I've always done with my browser without this aggravating problem constantly reminding me that I can't have what I want in firefox anymore.
Or can I? Does anyone have a solution I don't realize exists?
Thanks,
Sowelu

AppleScriptObjC can use pretty much everything in the Cocoa API, so yes, it is possible.
Note that a view is not the same as a window, and a window can have multiple views. There are also many ways to implement "tabs"; take a look at some of Apple's applications - they use various mixtures of toolbars, checkboxes, and radio buttons, for example. An application such as this will be a lot more involved than what you have done so far though, using custom classes and subclassing existing ones, so be prepared to do a lot of reading and researching.

Error message when I try to publish an iWeb photo album with audio to Mobileme:

I get the following error message when trying to publish a photo album with audio from iWeb to Mobileme. I've checked my account and I have plenty of available space on Mobileme and have logged in there.
An error occurred while publishing file “/private/var/folders/qg/qg-Qwo-82RWdDU+8ZNhusU+++TI/TemporaryItems/com.apple.i Web_9121_TEMP_344183369_3/sites/Site/Grand_Canyon_11_Slideshow_part_1_2_files/or iginal_2.jpg”. Try publishing again later.
Is there a problem with my photos or other content (I've added some songs to play in the slideshow)
Dan H.

First see if you can publish your site to a folder on your hard drive. You can select the folder by clicking on the site's folder in iWeb and using the Publish To: menu.
If that's successful try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
OT

Frustration with lack of support for Flash Player on IPad. When is Apple going to support Flash?

When is Apple going to support Flash Player on IPad?
The majority of sites that have multimedia content rely on Flash. Safari users are missing out on tons and tons of content that depends on Flash. I have and love my IPad 2. I should be able to use this awesome thing to get at anything I need to on the Internet. Yet when I need to access Flash sites, I am forced back to my windows PC.
Please Apple Make it happen! I'm tired of being ragged by android users on this. You need to fix it.

xx66stangxx wrote:
Flash is a dieing technology.
Really it's not seeming that way.
In fact, since the iPad release, and Steve Jobs famously declairing the death of Flash, Flash useage has increased.
Check it out 95.75% of all internet connected devices have the Flash Player.
http://www.statowl.com/flash.php
(the mac only has 12% share, it must be totally doomed then)
IOS Apps are now made using Adobe Flash
http://thenextweb.com/apple/2011/09/09/the-best-selling-ipad-app-on-the-app-stor e-was-created-with-adobe-flash/
And so are Android, Blackberry etc.
And HTML5 was supposed to be Apple's answer to all the missing content, yet here, 3 years later, HTML5 is no where to be seen, and lacks support/performance to compete with Flash.
http://getmoai.com/images/banners/mobilegaming-html5-vs-alternatives-011112-moai .jpg
Just look at how when you step outside the reality distortion field, things look much different. Look at HTML5 performance compared to Flash.... wasn't HTML5 supposed to outperform and save us from dead batteries? Well even 3 years after Steve Jobs claims it's still using 5x more resources than Flash.
This demo shows 16,250 sprites animating at 60fps using the Flash player, something HTML5 can't even do with less than 100 sprites.
http://www.bytearray.org/?p=4074
HTML5 is a joke, Flash is real, and is providing real content to real people right now. If you as an Apple owner believe the ownership of an IOS device is worth this loss, then more power to you.

Problem with File Content Conversion

Hi All
I am facing a problem with file content conversion.
This is my sample file structure:
Header_Record (Occurance - 1)
Field1 in Header
Field2 in Header
Item(Occ-1 to n)
Field3 in Item
Field4 in Item
<<ItemType>> (Structure in Item) (Occ - 0 to n)
<<Field5>> in ItemType
<<Field6>> in ItemType
<<ItemTypeCategory>> (Structure in ItemType)(Occ - 0 to n)
<<<<Field7>>>> in ItemTypeCategory
<<<<Field8>>>> in ItemTypeCategory
Footer_Record (Occurance-1)
Field9
Field10
There is a key field 'Type' in all the above records with unique value in each record.
Now, I defined Field content conversion as follows:
Recordset Structure: Header_Record,1,Item, * , ItemType, * ,ItemTypeCategory, * ,Footer_Record,1
Recordset Sequence: Ascending
KeyField Name: Type
Following are parameters defiled:
Header_Record.Keyfieldvalue: 00
Header_Record.fieldseperator: ,
Header_Record.fieldnames: Field1,Field2
Header_Record.endseperator: 'nl'
Item.keyfieldvalue: 05
item.fieldseperator: ,
item.fieldfieldnames: field3,field4
item.endseperator: 'nl'
ItemType.keyfieldvalue: 10
itemType.fieldseperator: ,
itemType.fieldfieldnames: field5,field6
itemType.endseperator: 'nl'
ItemTypecategory.keyfieldvalue: 15
itemTypecategory.fieldseperator: ,
itemTypecategory.fieldfieldnames: field7,field8
itemTypecategory.endseperator: 'nl'
Footer.keyfieldvalue: 20
Footer.fieldseperator: ,
Footer.fieldfieldnames: field5,field6
Footer.endseperator: 'nl'
Now, i pass the following file:
00,111
05,222
10,333
15,444
20,555
What i expect out of my FCC is this (Sample output to show the hierarchy of field values):
00,111
05,222
<<10,333>>
<<<<15,444>>>>
20,555
But, I am getting this output (Hierarchy is missing. All the structures are in the same order without hierarchy):
00,111
05,222
10,333
15,444
20,555
Field values are being identified according to field content conversion, but, the hierarchy of the fields is missing.
Can you please tell me how should i change my FCC config?
Sorry for this long question.
Many Thanks
Chandra
Edited by: Chandra Sekhar H on Jan 30, 2009 7:10 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:16 PM
Edited by: Chandra Sekhar H on Jan 30, 2009 7:17 PM

You will always get a flat structure from FCC. If you want hierarchichal strucuture, you have to create a target and map. You will get only like -
Root
--Recordset
Group1
Fields
Grop2
Fields
Group3
Fields
VJ

Problem with file content conversion in receiver file adapter

Hi All
I have a problem with file content conversion in receiver file adapter.
This is my recordset structure: Header_Record,1,Claim_Record,*,Check_Rec,1
These are the content conversion parameters:
Header_Record.fieldSeparator = ,
Header_Record.endSeparator = 'nl'
Claim_Record.fieldSeparator = ,
Claim_Record.endSeparator = 'nl'
Check_Rec.fieldSeparator = ,
Check_Rec.endSeparator = 'nl'
In SXMB_MONI, i can see that the data is correctly extracted from proxy, and correctly mapped to receiver message, and i see a checkered flag (success).
But, Adapter status is RED with the following error message:
Conversion initialization failed: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter '1.fieldFixedLengths' or '1.fieldSeparator' is missing
In communication channel monitoring, i get the following error message:
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel has not been correctly initialized and cannot process messages
What is going wrong here? Can anyone please tell me?
Thanks
Chandra

Posted in Incorrect forum.
Posted again in Process Integration forum

Missing Content-Length in HTTP response

Hi All,
I am experimenting with developing websevices using Sun Java Application Server. I have a working webservice using BEA Weblogic and I would like to have it ported to SUN. The application works like this: A client (Tuxedo application program) sends an XML document to the webservice, in response the websevice parse this document and based on certain fields it send back another document.
The problem is that the SUN application does not return the content-length in its response and hence the requesting client rejects the message. Can anyone help?? Below is the response from both SUN and Weblogic:
Weblogic
HTTP/1.1 200 OK
Date: Sat, 22 Oct 2005 11:42:53 GMT
Pragma: no-cache
Server: WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 WebLogic Server 8.1 SP2 Fri Dec 5 15:01:51 PST 2003 316284 with CR174524
Content-Length: 2025
Content-Type: text/xml; charset=UTF-8
Expires: Thur, 01 Jan 1970 00:00:00 GMT
Cache-Control: no-cache
Connection: Close
<?xml version="1.0" encoding="utf-8"?>
<SOAP-ENV:Envelope
SUN
HTTP /1.1 200 OK
X-Powered-By: Servlet/2.4
SOAPAction: ""
Content-Type: text/xml;charset=utf-8
Date: Sat, 22 Oct 2005 11:42:53 GMT
Server: Sun-Java-System/Application-Server
Connection: close
<?xml version="1.0" encoding="UTF-8"?>
env:Envalope xmls:env="http://schemas.xmlsoap.org/soap/envelope/"
As can be seen the Content-Length is missing.
Thanks for your help.
Ransford

Is there an option in Sun Java Application Server to include Content-Length in response to a client request? If not is it possible to generate this information from the service code?
Thanks.

Still missing content after 9.1.6 "upgrade" and content re-installs

I updated to 9.1.6 and immediately I noticed that various .aif files were missing, from my ESX24 instruments and Garageband loops.
After reading other peoples' similar stories and solutions here, I spent some hours (and probably $$ for all the bandwidth) downloading and re-installing "Garageband content" (which showed needed updating) as well as the "Essential" and "Additional" Logic content packages (which were supposedly already installed).
After downloading about 7GB of stuff, I am still missing content, .aif files which are part of ESX24 instruments and Garageband loops.
I guess I'll continue downloading and re-installing the rest of the Jam Pack content -- about another 10GB -- and hope that I get that stuff back. No guarantees though, I suppose.
Apple, this happened to me once before, when I upgraded from Logic Studio 8 to 9. It's really, really maddening.

You'll need to either manually copy over the old content, or download the media packs after you install the 9.0 version. In the Application menu, select "Download additional content...". However, do NOT click the "Select All Uninstalled" and instead download each part separately. A bit of added work, but selecting "Select all uninstalled"is giving people fits in that you end up with a lot of "Download Failed" messages and nothing installs.
HTH,
Tim

Exporting a slide with video content

I started a slide show in keynote. A few of my slides have video content. I am trying to export my slides so that I can edit them in iMovie. It's harder than I thought. When I export it, the video content does not play because it exports a picture of the slides. How do I export my slides with video content so that it still plays when I bring it to iMovie. I already tried making that slide a Quicktime movie with no luck. Maybe I missed something in that process. Thanks for any help you can provide.

You need to export from Keynote as Quicktime using either Fixed timing (in which case you specify enough time per slide for all the builds to complete) or using Recorded timing.
You can read more about the different Quicktime Export options in the Keynote help menu: http://docs.info.apple.com/article.html?path=Keynote/5.0/en/kyntc6c24df4.html
Hope that helps.

Iweb '08 - frustration with missing content

Similar Messages

Maybe you are looking for