Iweb 08 hangs or very slow to start at times.

Hi all
Iweb 2.0.2 on mac osx 10.5.1 (leopard) at times very - very slow to start or quit - shown in activity monitor and "force quit" as "not responding". It does however eventually start and quit.
This problem appeared out of the blue and occurred at the same time as an internet problem.
After much grasping at straws I am now convinced that it is related to the internet problem (as strange as it may seem). During the hang, if I remove the ethernet cable (or start it without the cable) there is no problem. When the internet connection is ok - no problem.
I unchecked the "auto update" preference in iweb but no difference.
It almost seems that on startup and quit, iweb wants to communicate with god and cannot, so it gets all upset. (that's as techo as I can get here).
Has anyone found this problem or have an answer - mind you all ok if the network is ok. I have sent a "failure report to apple" after the force quit.
Paul

Thanks for the reply
♦ a unique ssid : It is the case . I use Home as SSID for 2.4 Ghz and Home_5G for 5 Ghz
♦ wpa2 personal/ aes encryption : Never thought  using less than that
♦ a 5Ghz compatible adapter on the PC : I use an Intel 5100 adapter on my laptop  that do both 2.4 and 5 Ghz. I use the 5Ghz band on  my laptop  and the main family PC that is connected with a netgear WNDA4100 N900 adapter. All the  other PCs(5 in all) use 2.4Ghz . After disabling Wmm in QOS, i was not able to connect the 2 PCs using the 5Ghz band . They could connect using the 2.4 Ghz SSID though. Re-enabling Wmm allowed me to use 5Ghz again.
I have the Youtube problem on both the 2.4 and 5 Ghz band. As i said when i reconnect my old netgear router, no problems at all.

Similar Messages

  • My Apple iPad 3 is less than 6 months old - purchased in March of 2012.  I believe it already needs a new battery.  It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in.  Please advise - it is very annoying.n.

    My Apple iPad 3 is less than 6 months old - purchased in March of 2012.  I believe it already needs a new battery.  It will not hold a charge for very long andvs very slow in starting up a carge when I plug it in.  Please advise - it is very annoying.

    Take it to Apple Store. You are covered under your 1 year warranty.

  • MacBook suddenly very slow to start and operate

    Sudenly last week my MacBook becomes very SLOW to start and to operate. Until last week it was working fine.
    I do not believe to have perform anything abnormal and what is new is just the normal updating of the Softwares that is performed automaticlly every week.
    I tried to shut down and restart several time.
    I tried several time to reinstall Mac OS 10.6.8
    I checked the hard disk with Disk utility and it results OK.
    What to do ?
    Thanks
    Marc

    Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. Make sure you always have a minimum of 15% free disk space.
    Why Is My Mac Running So Slow? [MacRx] | Cult of Mac

  • Flash CS5 very slow to start up

    My version of Flash CS5 has recently become very slow to start up, taking well over a minute sometimes.
    It appears to stall for the longest time during a loading process called "...Loading Accelerators" (yes, very ironic).
    Anyone have any idea what may be causing this behaviour?
    Mac Pro running Mac OSX 10.6.7 (Snow Leopard) and 14Gb RAM.

    Yes I am using Sophos!
    Do Sophos have a feature/bug request page? This is one feature I can do without!
    Thanks for your help.

  • Very slow mac start up

    Hello, my macbook pro runs snow leopard 10.6.8 and is very slow at start up.
    I have encountered this ever since I configured linux Fedora dual boot with refit because it was an old version of Fedora. Now I have removed linux, refit etc. , but it loads the whitescreen, then bluescreen and eventually shows the account to login, but the whole thing takes 30 seconds! When it logs in it needs another 10 secs to be able to open applications. I have taken some steps to improve this, like: 1) removing  login items, 2) removing useless stuff from caches and preferences of the Library, 3) deleting files and apps I don't use and empty the trash can, 4) verify disk with disk utility, 5) Update software, 6) Erase unused partition I made in the past with disk utility. At the Activity Monitor I don't see anything strange so far. Any advice to make it response faster, if you had this issue before?
    Another issue is that I tried to change the user id some time ago, and now if I go to "Home-> Library -> Applications", there is no app showing up. I can go to the apps only from "Computer->Macintosh HD-> Applications" and from the dock off course. I don't know if that is important since it works anyway, or it plays a role for screwing up things.
    I can probably update to Mavericks, but my colleagues had crashes with their software like Matlab and other applications after installing Mavericks, and I would like to avoid it if I can.
    Please send some feedback, it is amazingly slow !

    I don't know about your start-up problems, but...
    ...your Applications should be in your root Applications folder, not in "Home>Library>Applications"... while there is an Applications folder in Computer>Macintosh HD>User>Applications, there are usually few (if any) Applications actually located there.
    So you're straight on that point.
    As to your 'slow' startup problems, 30 seconds might not be so bad on a spinning hard drive - you'd be able to startup in half that time only with an SSD (again, depending on your startup items). I really don't see anything out of line there.
    Clinton

  • My Macbook is becoming very slow on start up and operation

    My Macbook is becoming very slow on start up and operation. I have tried Mac Keeper but my small 2GB ram is always gone in the simplest of operations.
    Any help would be usefull

    Hello Chris,
    A variety of things could be causing the slow startup.  The first place I would look is at the Login items on your MacBook to see if there are items in this list that are set to automatically start.  Having applications automatically start will increase startup time.  This article has the steps to do this:
    Mac OS X 10.6: If items automatically open when you log in
    http://support.apple.com/kb/PH6811
    The steps from the article should work for Mac OS X 10.4-10.8; the only difference in Mac OS X 10.7 and 10.8 is that the Accounts icon is named Users & Groups:
    To permanently prevent items from opening at login:
    Choose Apple menu > System Preferences, and then click Accounts.
    Click Login Items.
    Select any items you don’t want to open automatically, and then click the "-" button.
    If you are still experiencing a slow startup after that, you might want to try the steps in the following article:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    I hope this helps!
    Best,
    Sheila M.

  • IWeb editing pages very slow

    Hello,
    i am using iweb creating some personnal websites, but, while editing the pages i have in the site with iweb, it orks very slow, even when writing text i write the letters and after i look at the screen and sometimes i see it still is writing what i typed a few miliseconds before.
    I am using the iweb file i backed up from another macbook pro 3,1 .
    With this intel core i7, it should be fast, very fast.
    What may be the problem? how can i correct this?
    Thank you for your help.
    Luís Neta

    Bonjour
    What is the size of your domain file (domain.sites2) ?
    By default, the domain file is there:
    Macinstosh HD > Users > Home folder (Username) > Library > application Support > iWeb > domain.sites2

  • My MacBook has become very slow to start up. What could be slowing it down?

    My MacBook is now very slow to start up. What could be causing this and what is a way to repair?
    Thanks, Chris

    Hello Chris,
    A variety of things could be causing the slow startup.  The first place I would look is at the Login items on your MacBook to see if there are items in this list that are set to automatically start.  Having applications automatically start will increase startup time.  This article has the steps to do this:
    Mac OS X 10.6: If items automatically open when you log in
    http://support.apple.com/kb/PH6811
    The steps from the article should work for Mac OS X 10.4-10.8; the only difference in Mac OS X 10.7 and 10.8 is that the Accounts icon is named Users & Groups:
    To permanently prevent items from opening at login:
    Choose Apple menu > System Preferences, and then click Accounts.
    Click Login Items.
    Select any items you don’t want to open automatically, and then click the "-" button.
    If you are still experiencing a slow startup after that, you might want to try the steps in the following article:
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/kb/TS2570
    I hope this helps!
    Best,
    Sheila M.

  • Does adding applicaions to Dock slow down start up time?

    Does adding applicaions to Dock slow down start up time? I'm thinking about placing the whole creative suite on dock but I'm unsure whether it will slow down time it takes to start up my laptop, please help.

    On the dock? Not particularly. If you have things starting up with the computer then yes.
    Having lots of stuff on your desktop does though.
    Best of luck.

  • Back up is very slow on 2 tb time capsule. After 2 days only 60 gb of 320 gb completed. Have connected ethernet cable. Any suggestions?

    Back up is very slow on 2 tb time capsule. After 2 days only 60 gb of 320 gb completed. Have connected ethernet cable. Any suggestions?

    Yes, that's terribly slow.  You should get somewhere in the neighborhood of 20-24 GB/hour via Ethernet, assuming there isn't a lot of conflicting network traffic or your Mac's CPU is under very heavy load.
    Are you sure you're actually using the Ethernet connection, instead of WIFI?   To check, turn Airport off.  If the backup fails, it's on WIFI.  In that case, you need to set Ethernet as the "preferred" network, via System Preferences > Network.  Click the "gear" icon at the bottom of the sidebar and select Set Service order.  Then drag Ethernet above Airport.  When both Airport and Ethernet are on, that will make OSX select Ethernet over Airport.
    If that doesn't help, see #D2 in Time Machine - Troubleshooting.

  • Last Maverick update has slowed down start up time?

    Last Maverick update has slowed down start up time?

    Go step by step and test.
    1. System Preferences > Startup Disk
        Select Macintosh HD
         http://support.apple.com/kb/PH13976
    2. Repair Disk
        Steps 2 through 8
        http://support.apple.com/kb/PH5836
      3.  Reset PRAM:   http://support.apple.com/kb/PH14222
      4. Backup your data.
          Install combo update.
          OS X 10.9.5 combo update
          http://support.apple.com/kb/DL1760?viewlocale=en_US&locale=en_US
    Best.

  • My Mac is very slow to start up, or not starting at all

    For the last month my computer has become very slow. The rainbow circle kept coming on everytime I send an instruction. Now it is extremely slow to star up and this morning is not even starting. I have had it on for more than 10min y still nothing happens. Any help will be welcome. I am a new user of Mac and not very familiar with the operating system.

    Reset PRAM.  http://support.apple.com/kb/PH4405
    Start up in Safe Mode.
    http://support.apple.com/kb/PH11212
    Repair Disk
    Steps 2 through 8
    http://support.apple.com/kb/PH5836
    Slow Startup
    http://support.apple.com/kb/PH10929
    Hope this helps.
    Best.

  • HT1338 my mac pro started running very slow not all the time it is only 2 months old

    My new macpro has been running very slow off and on (mostly on) it is only 2 months old I took it into the genius bar and they could not find anything wrong.  I took it home and it ran fine for a short while then started up again. I have watched activity monitor and can see no direct corellation.  Anyone have any ideas?

    Did you install anything new lately?
    Run any programs that purport to "clean", "speed up", or "optimize" your Mac

  • Mac Very Slow to Start Up

    My MacBook Pro has become very slow to run in the last few months, mostly since Yosemite installed.  My system boots up, then needs a log-in.  After log-in it takes about 20 minutes for the desktop to completely display.  The dock shows up, as does the desktop background, but the icons and the menu across the top of the screen take the longest to show up.
    Apple Mail is also extremely slow to load up, as is iPhoto.  Mail is worst, taking about 20 minutes to show up with messages.
    I have run disk utility several times both in the normal mode and also using Command + R and ran it from there.  No problems found.  A few items needed repair in Command + R, otherwise, no issues.  I ran both the Permissions sets and also the Repair disk.
    I have several gigabytes of mail as well as iCloud files stored on my account.  Could this be part of the problem?  Also, around 150 GB of photos in the iPhoto library. 
    Advice on what to check and how to accomplish this would be very much appreciated.  Waiting for a good 20 minutes to initially use my MBP (2011) is becoming a real nuisance.  (Then several more minutes to use Apple Mail which does not start automatically, neither does iPhoto).
    Thank you!

    Thanks for your reply.  It is very difficult to pick a portion of the log, but here is a section from late in the boot process which was begun at  4:33.  It takes 20 minutes to come up to full screen with dock, icons, etc. following a log-in.  I saved the file in a Word document in case you need more information.
    Looking at the log I see references to apps which have been removed from the system.  How do I completely all references to these?
    2015-02-21 4:53:50.389 PM ReportCrash[636]: Saved crash report for hidden[642] version ??? to /Library/Logs/DiagnosticReports/hidden_2015-02-21-165350_MYCOMPUTER.crash
    2015-02-21 4:53:57.974 PM Spotlight[436]: applications query - started
    2015-02-21 4:53:59.669 PM com.apple.xpc.launchd[1]: (com.hidden.daemon[643]) Service exited due to signal: Trace/BPT trap: 5
    2015-02-21 4:53:59.669 PM com.apple.xpc.launchd[1]: (com.hidden.daemon) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    2015-02-21 4:53:59.675 PM ReportCrash[636]: Saved crash report for hidden[643] version ??? to /Library/Logs/DiagnosticReports/hidden_2015-02-21-165359_MYCOMPUTER.crash
    2015-02-21 4:54:03.769 PM Spotlight[436]: applications query - finished in 5.8 seconds
    2015-02-21 4:54:10.021 PM com.apple.xpc.launchd[1]: (com.hidden.daemon[644]) Service exited due to signal: Trace/BPT trap: 5
    2015-02-21 4:54:10.021 PM com.apple.xpc.launchd[1]: (com.hidden.daemon) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    2015-02-21 4:54:10.027 PM ReportCrash[636]: Saved crash report for hidden[644] version ??? to /Library/Logs/DiagnosticReports/hidden_2015-02-21-165410_Computer_Name.crash
    2015-02-21 4:54:13.055 PM com.apple.xpc.launchd[1]: (com.apple.quicklook[645]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.quicklook
    2015-02-21 4:54:13.155 PM nsurlsessiond[389]: Being asked if container with identifier com.apple.clouddocs.com.apple.CloudDocs is foreground before getting callback from BRContainersMonitor!
    2015-02-21 4:54:13.155 PM nsurlsessiond[389]: Being asked if container with identifier com.apple.clouddocs.com.apple.CloudDocs is foreground before getting callback from BRContainersMonitor!
    2015-02-21 4:54:20.368 PM com.apple.xpc.launchd[1]: (com.hidden.daemon[647]) Service exited due to signal: Trace/BPT trap: 5
    2015-02-21 4:54:20.369 PM com.apple.xpc.launchd[1]: (com.hidden.daemon) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    2015-02-21 4:54:20.375 PM ReportCrash[636]: Saved crash report for hidden[647] version ??? to /Library/Logs/DiagnosticReports/hidden_2015-02-21-165420_MY COMPUTER.crash
    2015-02-21 4:54:31.071 PM com.apple.xpc.launchd[1]: (com.hidden.daemon[648]) Service exited due to signal: Trace/BPT trap: 5
    2015-02-21 4:54:31.071 PM com.apple.xpc.launchd[1]: (com.hidden.daemon) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    2015-02-21 4:54:31.077 PM ReportCrash[636]: Saved crash report for hidden[648] version ??? to /Library/Logs/DiagnosticReports/hidden_2015-02-21-165431_MYCOMPUTER.crash
    2015-02-21 4:54:37.417 PM bird[402]: Assertion failed: ![_xpcClients containsObject:client]
    2015-02-21 4:54:37.427 PM bird[402]: Assertion failed: ![_xpcClients containsObject:client]
    2015-02-21 4:54:37.428 PM bird[402]: Assertion failed: ![_xpcClients containsObject:client]
    2015-02-21 4:54:37.460 PM bird[402]: Assertion failed: ![_xpcClients containsObject:client]
    2015-02-21 4:54:37.460 PM bird[402]: Assertion failed: ![_xpcClients containsObject:client]
    2015-02-21 4:54:38.564 PM bird[402]: [QL] file:///Applications/GarageBand.app/Contents/Library/QuickLook/GBQLGenerator.ql generator/ has no identifier: ignoring
    2015-02-21 4:54:38.572 PM bird[402]: [QL] file:///Applications/iBooks%20Author.app/Contents/Library/QuickLook/iBooksAutho r.qlgenerator/ has no identifier: ignoring
    2015-02-21 4:54:38.000 PM kernel[0]: Sandbox: bird(402) deny file-read-data /Applications/Pixelmator.app/Contents/Library/QuickLook/PixelmatorLook.qlgenera tor/Contents
    2015-02-21 4:54:38.577 PM bird[402]: [QL] file:///Applications/Pixelmator.app/Contents/Library/QuickLook/PixelmatorLook.q lgenerator/ has no identifier: ignoring
    2015-02-21 4:54:39.511 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/GarageBand.app/Contents/Library/QuickLook/GBQLGenerator.qlgenerat or
    2015-02-21 4:54:39.813 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/GarageBand.app/Contents/Library/QuickLook/GBQLGenerator.qlgenerat or
    2015-02-21 4:54:39.963 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/GarageBand.app/Contents/Library/QuickLook/GBQLGenerator.qlgenerat or/Contents
    2015-02-21 4:54:40.215 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/iBooks Author.app/Contents/Library/QuickLook/iBooksAuthor.qlgenerator
    2015-02-21 4:54:40.513 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/iBooks Author.app/Contents/Library/QuickLook/iBooksAuthor.qlgenerator
    2015-02-21 4:54:40.764 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/iBooks Author.app/Contents/Library/QuickLook/iBooksAuthor.qlgenerator/Contents
    2015-02-21 4:54:41.015 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/Pixelmator.app/Contents/Library/QuickLook/PixelmatorLook.qlgenera tor
    2015-02-21 4:54:41.102 PM com.apple.xpc.launchd[1]: (com.apple.ReportCrash.Root[650]) Endpoint has been activated through legacy launch(3) APIs. Please switch to XPC or bootstrap_check_in(): com.apple.ReportCrash.DirectoryService
    2015-02-21 4:54:41.367 PM sandboxd[438]: ([402]) bird(402) deny file-read-data /Applications/Pixelmator.app/Contents/Library/QuickLook/PixelmatorLook.qlgenera tor
    2015-02-21 4:54:41.398 PM com.apple.xpc.launchd[1]: (com.hidden.daemon[649]) Service exited due to signal: Trace/BPT trap: 5
    2015-02-21 4:54:41.398 PM com.apple.xpc.launchd[1]: (com.hidden.daemon) Service only ran for 0 seconds. Pushing respawn out by 10 seconds.
    Hope this is helpful.  Looking forward to feedback.  Thank you.

  • MDT Wizard very slow to start when launching Litetouch.vbs

    Hi,
    For a few months, I have an issue when launching Litetouch.vbs, the Wizard initialisation il very slow. Normaly it takes 20 to 30 seconds to launch, now it takes about 4 minutes. The wizard hang 3 times for 1.5 minute. The problem is present on
    many computers here and even on a brand new installed computer.
    Something strange, when the Wizard have been launched a first time, then closed. The next time I launch Litetouch.vbs, I is fast (20 to 30 seconds).
    When I check the LOG : C:\MININT\SMSOSD\OSDLOGS\BDD.log, the lines that seems to hang are :
    <![LOG[Property definition is now = BDD_Welcome_ENU.xml]LOG]!>
    <![LOG[Property definition is now = WelcomeWiz_Initialize.xml]LOG]!>
    <![LOG[Property definition is now = DeployWiz_Definition_ENU.xml]LOG]!>
    Does anyone have an idea what can be the problem ?
    Thanks!
    Dominic

    The lines that are running slow above are when MDT is trying to write to the variables.dat file. There is nothing special about this operation, it's just reading/writing to a text file.
    I still think there is something else on this machine that is causing the litetouch.wsf scripts to run slowly. Perhaps you have some anti-virus programs causing problems.
    Best way to isolate the problem is to load a clean version of windows on a machine (without any corporate apps), and try running MDT litetouch again.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

Maybe you are looking for