Iweb 08 - how can i replace a single published page with an updated page?

At the moment, I find that I have to publish all four of my sites everytime I make a change to a single page.
Is there a way I can publish a single webpage and replace it via the ftp?
I'm sure I'm doing this wrong but can't seem to figure out why.

See Chapter 2 here.

Similar Messages

How can I replace my old print driver with my new printer driver on 13

how can I replace my old print driver with my new print driver on photo elements 13

The print driver is not installed in PSE.
Check with the manufacturer of your printer.

How can I get a single jar file with NetBeans?

How can I get a single jar file with NetBeans?
When I create the project I get these files:
dist/lib/libreria1.jar
dist/lib/libreria2.jar
dist/software.jar
The libraries that have been imported to create the project are in separate folders:
libreria1/libreria1.jar
libreria2/libreria2.jar
libreria1, libreria2, dist folders are all located inside the project folder.
I added the following code to the build.xml:
<target name="-post-jar">
<jar jarfile="dist/software.jar">
<zipfileset src="${dist.jar}" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria1.jar" excludes="META-INF/*" />
<zipfileset src="dist/lib/libreria2.jar" excludes="META-INF/*" />
<manifest>
<attribute name="Main-Class" value="pacco.classeprincipale"/>
</manifest>
</jar>
</target>
Of course there is also the project folder:
src/pacco/classeprincipale.form
src/pacco/classeprincipale.java
Can you tell me what is wrong? The error message I get is as follows:
C:...\build.xml:75: Problem creating jar: archive is not a ZIP archive BUILD FAILED (total time: 2 seconds)

This is not a NetBeans forum, it is a JDeveloper forum. You might want to try http://forums.netbeans.org/. I also saw your other question - try looking in the New to Java forum: New To Java

How can i replace the standard ESS iview with my own iview

I want to replace standard ESS addr iview with my own WD developed by ABAP
I added the iview(my WDA) into standard ESS addr page.
(pcd:portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_folder/com.sap.pct.erp.ess.pages/com.sap.pct.erp.ess.personal_information/com.sap.pct.erp.ess.cn/com.sap.pct.erp.ess.addr/com.sap.pct.erp.ess.addr)
And make it visible.
But I got this error in ESS PA addr :
WebDynpro Exception: Application PER_ADDRESS_CN Does Not Exist
Here is the error code :
Error code：ICF-IE-http-c:100-u:AC_WANGFZ-l:1-s:CE1-i:SAPCE101_CE1_01-w:0-d:20070514-t:172301-v:RABAX_STATE-e:UNCAUGHT_EXCEPTION
So , how can i replace the standard ESS iview with my own iview?
Thanks

Can you see any Javascript EPCF code in the old iView ? You are surely just going to have to find it (if our hunch is correct) and analyse it and copy it into your new iView so that it functions in some way that at least does not error

How can I replace the old commenting system with Disqus?

How can I replace the old commenting system on Business Catalyst with Disqus? Please help

Hi,
The Disqus integration has been done by at least one BC partner – simpleflame.com, on this site: http://kiyuco.com/free-videos . You could reach out to them inquiring for more details on how it has been done.
Kind regards,
-Sidney

How can I replace just the corrupt page(s) in the domain file of iWeb using Time Machine?

I back up with Time Machine and have an extensive elaborate website I created in iWeb '09 over a couple months and publish to a local folder and then upload to my server, but in the last few days I notice certain pages (that I haven't even worked on or touched) somehow become corrupted or "cross-contaminated" with elements and images from other pages. Once I see they are corrupt I make sure not to publish them (if the current published versions are the correct, non-corrupt versions) or if they did get published I can use Time Machine to retrieve the .html file and page files folder for that specific page and replace it in my published folder/server so it shows correctly on the Web. However, that does not replace the corrupted page(s) you see and work with when you launch iWeb and try to edit or continue working on that page.
I am confused as to how I go to the package contents of the domain file and replace just that page with a previous version from time machine. I don't want to replace the entire domain file because I have new changes I made to other pages even in the past hours. How can I keep the good pages and just get earlier, non-corrupted versions of the corrupt page(s)? I know it's not as easy as with the published site folder where you can just replace the page's .html file and folder, but I don't want to have to re-create the corrupted page(s) from scratch or have to replace it with the last non-corrupted domain file and then have to redo all my recent changes to new pages I made before discovering the corrupt page(s). Thanks for your help as now I can't make changes to the page(s) within iWeb itself.

Thanks for the response, Wyodor. I don't know what that is, but I'll have a look. Is it an alternative to iWeb or a way to transfer pre-existing iWeb sites? When you say merge domain files, is that like so multiple copies of the same site show up then you can pick and choose the non-corrupted pages and group them then delete the corrupted ones? I am on Snow Leopard with no plans or need to upgrade anytime soon.
And yes, I will read your links but just wanted to ask those questions. Maybe they'll answer my questions, maybe not.
I was able to discern that within the domain file is a domain folder with all the site folders, each with their own page ".gz" files which expand into ".xml" files. I was trying to figure out if you could simply drag the corrupt pages out that way and replace them with backup copies that are still good. I am having trouble discerning which pages are which as they all have random names like site-page-30F175E3-AE33-4F10-A490-1A096D9B185B.xml and although I expanded and opened each in Text Wrangler, I still couldn't discern which were which for sure, and trial and error proved cumbersome. Also, I did notice some of the later corrupted domain files had one or two more pages than the site itself has, so not sure how they got added or duplicated or what.
Again, I'll look at your links, but do you know about swapping out individual page .xml files this way within the domain file?

How can i replace parts of my laptop with better parts

I got a HP pavilion G6 . And i dont have the money to buy a new pc, so my question is, can i replace some parts with better ones, so i can have a better game expierience. And are there ways to boost my FPS?
Thanks
Niels

Nielsdg wrote:
I got a HP pavilion G6 . And i dont have the money to buy a new pc, so my question is, can i replace some parts with better ones, so i can have a better game expierience. And are there ways to boost my FPS?
Thanks
Niels
NO. You will have to spend a good deal of money to get a high FPS machine and those aren't cheap to get.
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

How can I replace the Python cgi script with CF

I am testing the sample app and want to just use CF to track
peer ids.
Can you give me the api to the web service calls.
I can then create the CFC to handle this.
In order to use the sample application that you built, you
need to setup your web server and host the provided Python script
(reg.cgi) for exchanging peer IDs. Please note that setting up the
web service is not needed for the hosted VideoPhone sample. In
VideoPhoneLabs.mxml, please set WebServiceUrl accordingly. You may
also use Google Apps to host this web service (minimal
modifications required).
The Python script should be placed in the cgi-bin location
according to your web server installation. The database is an
SQLite3 database. In reg.cgi, please edit the location of the
database in variable dbFile.
You also need to create a database scheme using the
followings:
CREATE TABLE registrations (
m_username VARCHAR COLLATE NOCASE,
m_identity VARCHAR,
m_updatetime DATETIME,
PRIMARY KEY (m_username)
CREATE INDEX registrations_updatetime ON registrations
(m_updatetime ASC);

the sample web service we provided has the following API:
to record peerID "1234" for username "foo", do
http://your.domain/cgi-bin/reg.cgi?username=foo&identity=1234
you should get back an XML document with result.update=true
or false depending on whether the database was updated.
to look up the peerID for username "foo", do
http://your.domain/cgi-bin/reg.cgi?friends=foo
you should get back an XML document like:
<?xml version="1.0" encoding="utf-8"?>
<result>
<friend>
<user>foo</user>
<identity>1234</identity>
</friend>
</result>
there will be no "identity" entry if the user is not found.
the lookup is case-insensitive but case-preserving, so if you
looked up "Foo", the user field would be "Foo" but there'd be an
extra "registered" field with the username as it was registered.
-mike

How can I delete a single unwanted page in a Pages document?

I'm unable to delete a single unwanted page from a document.

My page was blank. I took your suggestion and added some text. When I deleted all of the text the page deleted too. Thanks!!!!
Spencer

How can I replace one low quality source with another high quality one ?

Am I really this dumb or is it really this hard ?
I have one timeline / project / edit that essentially references one long source clip / event / file.
I have a newer higher quality transcoded version of the same source and want to replace the original lower quality version and end up with the same edited result just with better quality images !?
It's the same frame rate and image dimensions but "relink" tells me the new file is not "similar" enough and won't do it !
Why is this so hard ? Is there a way to export a good old fashioned edl and then just reconform using the new source ?
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well ?
Please let me know the problem is between the chair and the keyboard - not between the hard disk and the power cord !

Guessing that when you created the higher quality media, it was done outside of FCP and probably changed some important metadata that the app is looking for. Or perhaps there is a difference between the original audio and the new audio.
Anyway, Luis' advice about the replace edit seems like the easiest solution.
a_mumford wrote:
What if I wanted to to replace low res offline footage with finished colour-corrected material and output a finished master - would that be this clueless as well?
The usual way to do offline online is within FCP – creating the proxies and then using Preferences to switch back to and from.
If you sent it out for grading, the Relink should work fine. If you haven't seen this kb doc, it's worth reviewing.
Russ

How can I replace an existing html website with a new one I just created on iWeb?

I just created a new website on iWeb. It as to be published as a html site. Someone else already created a previous site, and used the name of my company. We hired him to do it, but he didn't do that great of a job, so now I need to know how to replace it. Thank you for your help!

Make sure the site folder created by iWeb is named exactly the same as the site folder currently on the server.
OT

How can I replace an older save file with a new one on game center?

Greetings,
I have been trying to change an older game saved file that I have created with my old Ipad with the new one that I have created on my new Ipad, both game files are played under my apple ID but I have no idea how to replace my older one with the new one.
The new file is superior to the old one so I wish to add the new saved file to my game center.
The game I am playing is Clash of Clans both file are created on apple products.
Let me know if there is a sulotion for that case.
Regards

Make sure the site folder created by iWeb is named exactly the same as the site folder currently on the server.
OT

How can I use a single query panel with two view criteria?

Hi all,
I have a requirement to allow users to change the "display mode" on a search results tree table for an advanced search page. What this will do is change the structure of how the data is laid out. In one case the tree table is 3 levels deep, in the other case it's only 2 with different data being at the root node.
What I've done so far:
1) I exposed the data relationship for these two ways of viewing the data in the application module's data model.
2) I created a view criteria in the two view objects that are at the root of the relationships, where (for simplicity sake) I'm only comparing a single field.
This is in one view object:
<ViewCriteria
    Name="PartsVOCriteria"
    ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.PartsVO"
    Conjunction="AND">
    <Properties>... </Properties>
    <ViewCriteriaRow
      Name="vcrow23"
      UpperColumns="1">
      <ViewCriteriaItem
        Name="PartDiscrepantItemsWithIRVO"
        ViewAttribute="PartDiscrepantItemsWithIRVO"
        Operator="EXISTS"
        Conjunction="AND"
        IsNestedCriteria="true"
        Required="Optional">
        <ViewCriteria
          Name="PartDiscrepantItemsWithIRVONestedCriteria"
          ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.PartDiscrepantItemsWithIRVO"
          Conjunction="AND">
          <ViewCriteriaRow
            Name="vcrow26"
            UpperColumns="1">
            <ViewCriteriaItem
              Name="InspectionRecordNumber"
              ViewAttribute="InspectionRecordNumber"
              Operator="="
              Conjunction="AND"
              Value=""
              Required="Optional"/>
          </ViewCriteriaRow>
        </ViewCriteria>
      </ViewCriteriaItem>
    </ViewCriteriaRow>
</ViewCriteria>
and this is in the other view object:
<ViewCriteria
      Name="IRSearchCriteria"
      ViewObjectName="gov.nasa.jpl.ocio.qars.model.views.InspectionRecordVO"
      Conjunction="AND">
      <Properties>... </Properties>
      <ViewCriteriaRow
         Name="vcrow7"
         UpperColumns="1">
         <ViewCriteriaItem
            Name="InspectionRecordNumber"
            ViewAttribute="InspectionRecordNumber"
            Operator="="
            Conjunction="AND"
            Required="Optional"/>
      </ViewCriteriaRow>
   </ViewCriteria>
3) I had a query panel and tree table auto-generated by dragging the data control for ONE of the view object data relationship that's exposed in the app module. Then I created a second query panel and tree table the same way but using the data control for the other. I'm hiding one of the query panels permanently and toggling the visibility of the tree tables based on the display mode the user chooses. Both tables have separate bindings and iterators.
This is a portion of the page definition:
<executables>
    <variableIterator id="variables"/>
    <searchRegion Criteria="IRSearchCriteria"
                  Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
                  Binds="InspectionRecordVOIterator"
                  id="IRSearchCriteriaQuery"/>
    <iterator Binds="InspectionRecordVO" RangeSize="25"
              DataControl="QARS_AppModuleDataControl"
              id="InspectionRecordVOIterator" ChangeEventPolicy="ppr"/>
    <iterator Binds="Root.QARS_AppModule.PartsVO1"
              DataControl="QarsMasterAppModuleDataControl" RangeSize="25"
              id="PartsVO1Iterator"/>
    <searchRegion Criteria="PartsVOCriteria"
                  Customizer="oracle.jbo.uicli.binding.JUSearchBindingCustomizer"
                  Binds="PartsVO1Iterator" id="PartsVOCriteriaQuery"/>
</executables>
4) I've created a custom queryListener to delegate the query event.
This is in my advanced search jsp page:
<af:query id="qryId1" headerText="Search" disclosed="true"
                  value="#{bindings.IRSearchCriteriaQuery.queryDescriptor}"
                  model="#{bindings.IRSearchCriteriaQuery.queryModel}"
                  queryListener="#{pageFlowScope.SearchBean.doSearch}"
                  queryOperationListener="#{bindings.IRSearchCriteriaQuery.processQueryOperation}"
                  resultComponentId="::resId2" maxColumns="1"
                  displayMode="compact" type="stretch"/>
This is in my backing bean:
public void doSearch(QueryEvent queryEvent) {
      String bindingName = flag
         ? "#{bindings.IRSearchCriteriaQuery.processQuery}"
         : "#{bindings.PartsVOCriteriaQuery.processQuery}";
      invokeMethodExpression(bindingName, queryEvent);
   private void invokeMethodExpression(String expr, QueryEvent queryEvent) {
      FacesContext fctx = FacesContext.getCurrentInstance();
      ELContext elContext = fctx.getELContext();
      ExpressionFactory eFactory = fctx.getApplication().getExpressionFactory();
      MethodExpression mexpr =
         eFactory.createMethodExpression(elContext, expr, Object.class, new Class[] { QueryEvent.class });
      mexpr.invoke(elContext, new Object[] { queryEvent });
When no inspection record number (the only search field so far) is supplied in the query panel, then it behaves correctly. Namely, the tree tables shows all search results. However, when an inspection record number is supplied the tree table that was created with the query panel in use (remember there are two query panels, one of them is hidden) shows a single result (this is correct) while the other tree table (the one with the hidden query panel that isn't in use) shows all results (this is NOT correct).
Is what I'm trying to accomplish even doable? If so, what am I missing?
I'm using JDeveloper 11.1.1.7
Thanks,
Bill

I ended up keeping one query panel permanently visible and the other permanently hidden. When performing a search using the table that has the hidden query panel, I seed the query descriptor for the hidden query panel using the visible query panel's query descriptor and then delegate the request:
   public void doSearch(QueryEvent queryEvent) {
      String bindingName = null;
      if(isIrTableRendered()) {
         bindingName = "#{bindings.IRSearchCriteriaQuery.processQuery}";
      } else {
         seedPartsQueryDescriptor();
         bindingName = "#{bindings.PartsVOCriteriaQuery.processQuery}";
         queryEvent = new QueryEvent(partsQuery, partsQuery.getValue());
      invokeMethodExpression(bindingName, queryEvent);
   private void seedPartsQueryDescriptor() {
      ConjunctionCriterion criterion = irQuery.getValue().getConjunctionCriterion();
      for(Criterion criteria : criterion.getCriterionList()) {
         AttributeCriterion attributeCriteria = (AttributeCriterion)criteria;
         List values = attributeCriteria.getValues();
         String qualifiedName = attributeCriteria.getAttribute().getName();
         int indexOfDot = qualifiedName.lastIndexOf(".");
         String name = indexOfDot < 0
            ? qualifiedName
            : qualifiedName.substring(indexOfDot + 1);
         ConjunctionCriterion partsCriterion =
            partsQuery.getValue().getConjunctionCriterion();
         for (Criterion partsCriteria : partsCriterion.getCriterionList()) {
            AttributeCriterion partsAttributeCriteria =
               (AttributeCriterion) partsCriteria;
            String partsQualifiedName =
               partsAttributeCriteria.getAttribute().getName();
            if (partsQualifiedName.endsWith(name)) {
               partsAttributeCriteria.setOperator(attributeCriteria.getOperator());
               List partsValues = partsAttributeCriteria.getValues();
               partsValues.clear();
               for (int i = 0, count = values.size(); i < count; i++) {
                  partsValues.set(i, values.get(i));
   private void invokeMethodExpression(String expr, QueryEvent queryEvent) {
      FacesContext facesContext = FacesContext.getCurrentInstance();
      ELContext elContext = facesContext.getELContext();
      ExpressionFactory expressionFactory =
         facesContext.getApplication().getExpressionFactory();
      MethodExpression methodExpression =
         expressionFactory.createMethodExpression(elContext, expr, Object.class, new Class[] { QueryEvent.class });
      methodExpression.invoke(elContext, new Object[] { queryEvent });
Then when the advanced/basic button is pressed for the visible query panel, I programmatically set the same mode for the hidden query panel:
   public void handleQueryModeChange(QueryOperationEvent queryOperationEvent) {
      if(queryOperationEvent.getOperation() == QueryOperationEvent.Operation.MODE_CHANGE) {
         QueryMode queryMode = (QueryMode) irQuery.getValue().getUIHints().get(QueryDescriptor.UIHINT_MODE);
         QueryDescriptor queryDescriptor = partsQuery.getValue();
         queryDescriptor.changeMode(queryMode);
         AdfFacesContext.getCurrentInstance().addPartialTarget(partsQuery);

How can I replace action of Downloads Wndow with Internet Download Manager's (IDM) when downloading a file?

Question is clear. no detail is necessary.

Contact IDM Support
http://www.internetdownloadmanager.com/register/new_faq/main.cgi

Can't play a single downloaded video, with all updated softwares and O.S.

Problem : Attempting to play any downloaded iTunes video content from my iTunes Library prompts me with the following message:
Authorize Computer
This computer is not authorized to play "any iTunes Video That You Just finished downloading.m4v".
If you purchased this content you can open iTunes and authorize this computer to play this content by entering your Apple ID and Password.
Cancel Open iTunes
Now, keep in mind, iTunes has BEEN open the whole time, it was a necessary prerequisite to purchase an episode of a T.V. show from the iTunes store and download it so I could watch it before bed. So, clicking "Open iTunes", simply brings up another prompt:
Waiting for iTunes to authorize this computer to play "The Video You Just PURCHASED and DOWNLOADED.m4v"
iTunes will open and prompt you for a password. You will not be able to play the content on this computer until you successfully authorize it using iTunes.
Cancel
I decide not to cancel, and do as the Apple tells me. I wait. Id does not prompt me . . . (maybe because iTunes has been launched the whole time . . . I dunno), instead, the message just eventually disappears and iTunes is left playing a silent, grey screen for my entertainment.
I thought to check that I was running the most current updates on all software (I am), OS 10.5.5,
Quicktime Payer Version 7.5.5 (240)
Quicktime Version 7.5.5 (975)
and YES, I am running iTunes 8. Everything was playing back beautifully BEFORE I updated. NOW, I can not watch a a single purchased tv episode from 2 years ago, last week or right now.
I am signed in as the Admin. I am the ONLY user and absolute ADMINISTRATOR of this machine.
I authorized the computer from the store menu. I was told that it is already authorized. 2 computers out of 5.
I quit.
Restarted.
Authorized.
Opened "TV episode".
"Not Authorized" message.
I quit iTunes.
Relaunched.
Deauthorized computer.
Quit iTunes
Relaunched.
Authorized computer.
Quit iTunes.
Relaunched.
Opened episode.
Not Authorized.
so, I - Quit iTunes and any other open applications until only Finder was open.
Choose Go > Go to Folder.
Typed /Users/Shared/SC Info and clicked Go.
Set finder to Column View
Selected the SC Info folder and moved it to the Trash by choosing File > Move to Trash.
Restarted the computer and opened iTunes.
Authorized my computer to play my purchases.
Already authorized.
No Play.
Quit iTunes and all apps.
Repeated trash SC procedure.
Shut down.
Restart.
Launch iTunes.
De-authorised.
Quit iTunes and all apps.
Repeated trash SC procedure.
Restart.
Launched iTunes.
Authorized.
Opened tv episode.
No play.
FRACK ME!
I've been slaving over two computers running final cut studio, logic studio 2, ableton live, NI Komplete, DJay, Traktor scratch, safari, firefox, aperture, photoshop CS3, iPhoto, Quicktime pro, Toast, text edit, acrobat, preview, reason, avmixer pro, and Riff Works for fifteen hours. I just wanted to chill with a nice old episode of BSG, that I lost in a harddrive crash a while back and now have finally been able to D.L. from iTunes, to relax off to bed. Instead, I've spent one and a half the amout of time I would have spent with my show, jumping through the help hoops and documenting all this (I don't have T.V., I hate it. iTunes is the only way I will allow myself to watch a T.V. program . . . occasionally).
Is my brain just fried from working too hard, for too long outside the consumer realm , and missing something fundamentally obvious to iTunes users who don't work all day and night with every conceivable form of digital media? My brain is totally FRACKED now. Gotta find something to watch to unwind.

See Chapter 2 here.

Iweb 08 - how can i replace a single published page with an updated page?

Similar Messages

Maybe you are looking for