IWeb '08 Images Not Publishing and Image Distortion in Application

I created a website a couple of years ago and recently noticed two issues:
1) Images I included on the site are now not showing up on the published site, but still appear in iWeb '08 app.
2) Images and graphics in iWeb '08 app are barely showing up. It looks like images that were really over exposed, but the rest of my computer shows colors and images beautifully.
Anyone else run into these issues? How should I fix it?
Thanks in advance for your help!

Actually, somehow, I just solved both problems. I opened up iWeb 9 and it seemed to resolve both issues. Sorry for any confusion.
Message was edited by: ethouston

Similar Messages

  • Can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    can't open iTunes, it said it has failed to start because MSVCR80.dll was not found, and I re-installed application many times and still problem persist, how do I solve this?

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • Please! Images not publishing!

    Dear Sir or Madame.
    URL: lifepurify.com
    i published a site to
    http://lifepurify.com/bodypurify/ioncleanse/
    None of the images were successfully published.
    I can view them in design mode but not in F12 mode.
    Thanks for your time
    mtc

    ignore my previous- the folder naming had me confused.
    the images all show except the top left image, and it doesn't
    show because
    it's a site root relative path, and the "site" is defined to
    a subfolder of
    the domain, the ioncleanse folder.
    don't use site root relative paths in this site, only use
    document relative
    paths for this.
    <img src="/images/logos/ion_cleanse_logo_small.gif
    that means to look here for the image:
    http://lifepurify.com/images/logos/ion_cleanse_logo_small.gif
    but the image is really here:
    http://lifepurify.com/bodypurify/ioncleanse/images/logos/ion_cleanse_logo_sm
    all.gif
    http://lifepurify.com/bodypurify/ioncleanse/images/Template/
    Suggest not using Template or Templates as folder names for
    anything except
    the "real" Templates folder dw creates, just to avoid
    confusion.

  • Text frames not supported and images can't be imported when trying to open word document, can this be fixed?

    trying to open a word document in pages, no images, diagram r tables are seen, states problems are text frames not supported and that images can not be imported. the document opens fine in mircosoft office. can this be fixed or do i need to buy microsoft office for the imac, thanks andrea

    Pages isn't a perfect converter of Word documents. They are differently coded. Some documents opens well but some don't.
    You could try opening the document in LibreOffice, a free clone of MS Office.

  • IWEB not publishing - and never has

    I tried to use iWEB to publish, after asing for my password (and validating) it just goes into dialog ... "loging into .Mac" ... stays there forever and refuses to go on. I was able to log-in to my iDisk and manually create a folder called WEB (none existed before), I then put a folder in it called Sites and then drug a test page to the sites forlder in another folder called test.
    I can use: web.mac.com/theimage1/test/
    and it works fine I see the page.
    When I then try to get iWEB to publish, it just goes to the log into dialog again and nothing happens. It brings up my .Mac log-in page and I do put in my password and it indictes the password is VALID. I have even have tried with my iDisk mounted locally ... iWEB just fails to publish in the publish step.

    Such as what type of Internet connection are you using (DSL, Cable, Analog Modem)? Is the connection wired (Ethernet cable) or wireless (AirPort)? In what general geographic location on the globe are you located? Does you ISP (Internet Service Provider) require you to set certain attributes such as MTU (Maximum Transmission Units) to a specific value?
    Ok, I am on a cable modem from Roadrunner. It goes to a dLink router with nothing being blocked. The G5 is wired to the network (no airport), the address is manually set not DHCP (and it works on everything else thus far and has for over a year). Safari, Firefox, Fetch ftp, Guru ftp, checking & banking accounts, stock accounts, etc. I am in the Charlotte NC area.
    I run my own WEB site external to .Mac and the ftp software and GoLive work fine through the system. The sytems preferneces>.Mac work fine in connecting to my iDisk. Name and password are "valid" according to the Dialog box. I don't use iSync so can't check that. But, log-in and iDisk both work.
    I have let the "logging-in to .Mac" dialog run overnight with no result ... I think that's long enough! If I just mouse click on the Log-in dialog box it disappears, not even hit the cancel button.
    I don't think it's a network problem. Unless iWEB uses something totally outside the ordinary. All other communications even multi-person iChat Video works well.

  • CS4 - Render preview image not scaled and position properly

    Hi,
    I'm trying to edit video captured with a GoPro in R4 mode.
    It produces videos int he following format:
    1280x960
    1.0 square pixel
    29.97 fps
    I created a sequence corresponding to these settings. When no effects are added to the clip in the sequence, playback is fine in the sequence preview panel.
    Things starts to get messy when I edit the clip. I get the red bar over the clip telling me I need to render a preview. And it's true, the playback skips and lag.
    Here's some image of the result of the rendered preview:
    when playing:
    Image above shows both clips are at the same frame. No effects applied beside a title.
    When not playing and clicking on the preview image:
    Image is centered, but the ratio changed.
    Investigating this problem showed em that the rendered videos changed resolution (which is logic), but they also changed the ratio of the original video!!
    Original video is 1280 * 960 for a 4:3 ratio, while the preview videos are 720*480 (not 4:3).
    Now, I tried changing the rendered preview settings here:
    I had no success. The only codecs I have found to not change the resolution of the preview are "Uncompressed UYVY 422 8 bits" and "V210 10-bit YUV". These codec produce high quality videos (same resolution, high bit rates) as preview that my computer still have problem to play.
    I'm not more advanced.
    In my choices of settings, the only preview file format I have is microsoft AVI.
    So,
    1. Anyone ever had this problem? (and knows how to fix it )
    2  How can I have more choice than AVI for a preview file format.
    3. How can I install more preview codecs to test the different options?
    4. Suggestions, comments?
    Please, keep in mind that I'm still discovering adobe premiere. I started to play with it only 2 days ago. This is pretty much the last problem I have before starting to edit my footage.
    Thank you all.
    PS
    Sorry if my english is not perfect, it's not my main langugage.

    @John T Smith:
    already searched for the answers, but withiout success.
    @Ann Benns:
    Thanks for the advice. I will try that tonight.
    In the meantime, I found a post about a guy who had the same issue as me:
    http://goprouser.freeforums.org/changed-question-about-adobe-premiere-resolution-t1492-20. htm
    The post ends in 2010 with: "WOOHOO!!  I finally got it (mysteriously) to work again!"
    I will try to send him an email.
    Thanks for your help. If anyone has more suggestions or ideaas, they are more than welcome!

  • HELP! Images not loading and Firefox taskbar icon is a white file.

    I went through all the suggestions in the image not loading help page and same with the add ins and nothing helping. The images load fine on Google Chrome so I know it's not the site. It might just be Adobe Flash images, but that's as far as I know how to pinpoint.
    As far as the task bar goes, it's just a while file icon instead of the Firefox one. It doesn't bother me, but I just thought it might be related.
    I'd appreciate any help! Anybody! Thanks,
    Stef

    What do you see if you right-click the area where such a missing image should be?
    Is that a context menu for images with "View Image Info"?
    Are there any icons on the location bar that plugins are used or mixed content is blocked?
    If images are missing then check that you do not block images from some domains.
    *Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
    Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Image.getWidth(null) and image..getHeight(null)  returns -1

    Hi ,
    Plz tell me whats wrong with code
    import java.awt.Image;
    import java.awt.Toolkit;
    public class ImgSize {
        public static void main(String args[]) {
            Image image = Toolkit.getDefaultToolkit().getImage("Picture.jpg");
            double width = image.getWidth(null);
            double height = image.getHeight(null);
            System.out.println("width :" + width + "-- height :" + height);
            getImageDimesion("Picture.jpg");
        public static void getImageDimesion(String abc) {
            Image image = Toolkit.getDefaultToolkit().getImage(abc);
            double width = image.getWidth(null);
            double height = image.getHeight(null);
            System.out.println("width :" + width + "-- height :" + height);
    }output:
    width :-1.0-- height :-1.0
    width :2592.0-- height :1944.0
    There is no difference in main function getWidth/ getHeight and function getImageDimension getWidth/ getHeight
    If u remove getWidth and getHeigth in the main function i.e comment the 1st four lines in main function then the output is
    Output
    width :-1.0-- height :-1.0
    Plz help in understanding this.
    Thanks
    Venkat

    Toolkit images are not loaded until they are first drawn or you request a property from it (such as getWidth). To force the image to load and wait for it to finish loading, you can use the MediaTracker class. The ImageIcon class has one built in.
    Image image = Toolkit.getDefaultToolkit().getImage("Picture.jpg");
    new ImageIcon(image); //loads the image

  • List VM Images not listing my images

    HI 
    I am using the virtual machine api on https://msdn.microsoft.com/en-us/library/azure/dn499770.aspx to get a list of all available vm images, but when I call this I am not getting the VM images that I have created and are available on the portal, the
    list of vm images I get with the api are very different from the ones I have available on the portal.
    Anyone experience this ?? maybe I have to get my vm images in a different way?
    Thanks for your help.

    https://msdn.microsoft.com/en-us/library/azure/jj157191.aspx
    - Above link provides details on OS images. OS images are the ones you create from PowerShell or from management portal (Virtual Machines > images). These images are restricted with in the scope of a specific subscription id.
    I will assume that there are two reasons why these come as different api endpoints
    - It is easier to manage security checks this way (as one is owned by subscription id) vs. other is generic to a subscription type
    - VM images, is not just OS image. It contains much more provisioning information (about disks etc.)
    Please note that these are my assumptions (not authoritative why it is different). Hope you understand. :)

  • IWeb 09 will not publish

    I just upgraded from iWeb 1.1.2 to iWeb 09. I then made a number of changes to my website. I have attempted to publish the site dozens of times since I made the changes. The site will not publish. The publishing process seems to be correct. I get the "site has been published message, but when I visit the site the changes are not there.
    Has anyone out there had this problem?
    Thanks,
    Jack

    Versions of iWeb previous to '08 use a domain.sites file and published to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb.
    iWeb '08 converted the file format to domain.sites2 which was not successful for a lot of us. I ended up rebuilding all my sites. This version also dropped the iWeb folder on your iDisk and publishes to Finder/Go/iDisk/My iDisk/Web/Sites as does iWeb '09.
    Also .Mac was changed to MobileMe for some reason.
    You will note these differences in the two URLs.
    I have never tried to convert a site made in '06 to '09 without going through '08.
    As I pointed out, the conversion is not perfect and you should deleted and redo the sections that don't publish correctly.
    If I was in your situation, I would start afresh on a new, blank domain file and copy the content that you want to keep over from the published version of your old site to the new domain file..

  • Iweb site site not publishing properly (ftp)

    I've been using iweb for about 2 years now so I know it pretty well. I deided to use the iweb seo tool to get the site more popular I did all the pages tagging them ect.. I then oublished it to the ftp server will  my ftp server settings. About an hour later it had finished so I type inmy website (www.ersanspics.co.uk) and it comes up with a message on chrome ''404 page not found'' the only way I can get to home page is by typing this http://www.ersanspics.co.uk/www.ersanspics.co.uk/Home_1.html . I think that iweb seo tool and iweb overlaped becouse I published on the same ftp server settings. I uninstalled iweb seo tool and tryed but nothing happend.

    You appear to have created an extra folder - www.ersanpics.co.uk -  in the root folder on the server.
    When you upload website files with the iWeb FTP or SEO Tool, leave the Directory/Path field blank in the publishing settings window...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html

  • Images as Buttons and Image Resizing in mxml

    Sorry for all the questions but I've run into a problem when trying to create buttons that are just an image in mxml. When I first tried this I couldn't find a way to get the border around the button to dissapear so it ended up looking like my image had an extra black border around it. Then someone here suggested I just set the buttonMode property of an mx:Image to true which ended up working fine to a point. The problem I'm having is that even if I make the tabEnabled property of the image (that I'm using as a button) true, I can't tab over to it. Is there a way to either get rid of the black borders of a button or to make it so I can tab over to an image I'm using as a button?
    My second question has to do with image resizing. Lets say I have an image of a horizontal line that I want to put at the top of the mxml page, and I want it to extend the full length of the page, even after the user has resized the browser. Is there a way to do that? I've tried putting the width as 100% or giving the image a "left" and "right" value so that presumably it would be stretched to fit within those but nothing has worked so far. Is there no way to do this or am I doing something wrong?
    Thank you for any help you guys can give.

    Of course, sorry about that. So the following is a barebones example of how I currently implement buttons and images as buttons:
    <mx:Button id="facebookButton" icon="@Embed(source='image.png')" width="30"/>
    <mx:Image buttonMode="true" id="button" source="anotherimage.png" enabled="true" click="{foo()}"/>
    And within the image I've tried making the tabFocusEnabled property true but to no avail.
    The following is how I've tried stretching out an image across the whole page:
    <mx:Image source="yetanotherimage.png" width="100%" scaleContent="true"/>
    <mx:Image source="yetanotherimage.png" left="10" right="10" scaleContent="true"/>
    Is this more helpful?

  • Links work in iweb, but do not publish

    NOW the "post new topic" shows! Links made in iweb to external webpages work in iweb, but do not work when I publish to my folder or upload them to my server for my website. The links to other pages within iweb & the email links work in my folder & uploaded. I have redone my page & all links several times & it always works in iweb, but then don't work in the folder when I publish or upload. Even links that start with http:// don't work & my setting are correct for it to recognize them. Thanks so much for any help.

    I don't understand. When I made the page the first time, I put the pics on it (page is 1270 pixels wide & fits on my 17" monitor & displays fine in iweb & when I go to the website). & then made the text boxes & sized them to fit around the pics & typed the text in. I tried doing the "wrap" in inspector, but the type just went over the pics & didn't wrap around it. I put the links for the ffrco, nuvet, email & menu in separate "insert link" boxes. The other links were from a copy & paste from the Nuvet website. All links worked perfect while in iweb. but only the email & menu links worked when I published to the folder & uploaded them. iweb is way different to use than Pagemill3, which is what I created my original website on 6 1/2 years ago. But my first computer melted down inside & I don't have the program that created it & the new computer won't take the software that worked on OS 8.6, so have to do the whole website now from scratch & having a terrible time. There are other issues, but the links thing is the most frustrating.
    When I redid the page again, I copied & pasted the whole page onto a new page that I had sized & added the background to. The links all worked in iweb & when they didn't work when published to the folder or uploaded, I rechecked the web addresses for all the links & even reentered them, though they were the correct links already in there.
    When I made my homepage, I made it to fit a 15" monitor, so anybody could see my website without scrolling. A good friend told me I had the last 15" monitor still in use & to make it fit my 17", so I did.
    Thanks so much for looking at it. I really appreciate all your help. I have printed the manuel & been reading that & going to the Help section & I just can't figure it out.

  • IWeb with Blog not publishing

    After upgrading to the Mobileme, I attempted to publish a new blog entry.
    iWeb failed to recognise the login id, and my mac would even logout from Mobileme.
    As per suggestions from this forum, once I un-ticked 'Comments' from my blog, my website is able to publish as per normal. Hope this info helps you until they fix the mobileme + iweb

    I can report my iWeb is back to normal and I can post the comments button and all.
    Its been off for 6-7 days.

  • I can not publish and query services in Registry Server?Help please!

    I want to use Registry Server in Jwsdp1.5 to publish and query services,but there is some problems:
    2006-4-26 10:05:26 com.sun.registry_server.server.RegistryServerServlet init
    ����: NamingException: javax.naming.NameNotFoundException: Name org.xml.sax.driver is not bound in this Context
    2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl identifyContentType
    ����: SAAJ0537: ������������������������������������ SOAP ����
    2006-4-26 10:05:27 com.sun.xml.messaging.saaj.soap.MessageImpl <init>
    ����: SAAJ0535: ��������������
    javax.xml.registry.JAXRException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
         at com.sun.xml.registry.uddi.RegistryServiceImpl.jaxmSend(Unknown Source)
         at com.sun.xml.registry.uddi.RegistryServiceImpl.send(Unknown Source)
         at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
         at com.sun.xml.registry.uddi.UDDIMapper.findOrganizations(Unknown Source)
         at com.sun.xml.registry.uddi.BusinessQueryManagerImpl.findOrganizations(Unknown Source)
         at QueryByName.doPost(QueryByName.java:63)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
         at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:127)
         ... 34 more
    Caused by: java.security.PrivilegedActionException: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.call(HttpSOAPConnection.java:121)
         ... 34 more
    Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Unable to internalize message
         at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:231)
         at com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl.<init>(Message1_1Impl.java:43)
         at com.sun.xml.messaging.saaj.soap.ver1_1.SOAPMessageFactory1_1Impl.createMessage(SOAPMessageFactory1_1Impl.java:32)
         at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection.post(HttpSOAPConnection.java:354)
         at com.sun.xml.messaging.saaj.client.p2p.HttpSOAPConnection$PriviledgedPost.run(HttpSOAPConnection.java:150)
         ... 36 more
    Caused by: com.sun.xml.messaging.saaj.SOAPExceptionImpl: Invalid Content-Type:text/html. Is this an error message instead of a SOAP response?
         at com.sun.xml.messaging.saaj.soap.MessageImpl.identifyContentType(MessageImpl.java:295)
         at com.sun.xml.messaging.saaj.soap.MessageImpl.<init>(MessageImpl.java:146)
         ... 40 more
    can you help me?expectiong your advise!thank you

    I have created my own private registry, I hava installed JWSDP1.5.
    I use a .jsp file and a servlet to publish services,the servlet is:
    import javax.xml.registry.*;
    import javax.xml.registry.infomodel.*;
    import java.net.*;
    import java.security.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    import java.util.*;
    public class Publish extends HttpServlet{
         public void doGet(HttpServletRequest request,HttpServletResponse response)
         throws ServletException,IOException{
              doPost(request,response);
         public void doPost(HttpServletRequest request,HttpServletResponse response)throws ServletException,IOException{
         String userName=request.getParameter("username");
         String authPassword=request.getParameter("password");
         Connection connection = null;
    RegistryService rs=null;
    BusinessLifeCycleManager blcm=null;
    BusinessQueryManager bqm = null;
         Properties props=new Properties();
    props.setProperty("javax.xml.registry.queryManagerURL","http://localhost:8080/RegistryServer");
    props.setProperty("javax.xml.registry.lifeCycleManagerURL","http://localhost:8080/RegistryServer");
    props.setProperty("javax.xml.registry.factoryClass","com.sun.xml.registry.uddi.ConnectionFactoryImpl");
    //props.setProperty("com.sun.xml.registry.http.proxyHost",httpHost);
    //props.setProperty("com.sun.xml.registry.http.proxyPort",httpPort);
    // props.setProperty("com.sun.xml.registry.https.proxyHost",httpsHost);
    // props.setProperty("com.sun.xml.registry.https.proxyPort",httpsPort);
    try{
    // Create the connection, passing it the
    // configuration properties
    ConnectionFactory factory =
    ConnectionFactory.newInstance();
    factory.setProperties(props);
    connection=factory.createConnection();
    PrintWriter out=response.getWriter();
    out.println("<a href=\"/publishapp/publish.jsp\">You can click here to be Back </a>");
    out.println("<H3>Created connection to registry</H3>");
    rs=connection.getRegistryService();
    blcm = rs.getBusinessLifeCycleManager();
    bqm = rs.getBusinessQueryManager();
    //out.println("Got registry service, query " +"manager, and life cycle manager");
    // Get authorization from the registry
    PasswordAuthentication passwdAuth =
    new PasswordAuthentication(userName,authPassword.toCharArray());
    Set creds = new HashSet();
    creds.add(passwdAuth);
    connection.setCredentials(creds);
    out.println("<br>");
    out.println("<H3>Established security credentials</H3>");
    //receive organization name and description
    String orgName=request.getParameter("orgname");
    String orgDescription=request.getParameter("orgdescription");
    // Create organization name and description
    Organization org =
    blcm.createOrganization(orgName);
    InternationalString s =
    blcm.createInternationalString(orgDescription);
    org.setDescription(s);
    //receive contactor name phone and Email
    String contactName=request.getParameter("contactname");
    String contactPhone=request.getParameter("contactphone");
    String contactEmail=request.getParameter("contactemail");
    // Create primary contact, set name
    User primaryContact = blcm.createUser();
    PersonName pName =
    blcm.createPersonName(contactName);
    primaryContact.setPersonName(pName);
    // Set primary contact phone number
    TelephoneNumber tNum = blcm.createTelephoneNumber();
    tNum.setNumber(contactPhone);
    Collection phoneNums = new ArrayList();
    phoneNums.add(tNum);
    primaryContact.setTelephoneNumbers(phoneNums);
    // Set primary contact email address
    EmailAddress emailAddress =blcm.createEmailAddress(contactEmail);
    Collection emailAddresses = new ArrayList();
    emailAddresses.add(emailAddress);
    primaryContact.setEmailAddresses(emailAddresses);
    // Set primary contact for organization
    org.setPrimaryContact(primaryContact);
    String serviceName=request.getParameter("servicename");
    String serviceDescription=request.getParameter("servicedescription");
    String serviceURL=request.getParameter("serviceurl");
    String svcbindDescription=request.getParameter("svcbinddescription");
    // Create services and service
    Collection services = new ArrayList();
    Service service =
    blcm.createService(serviceName);
    InternationalString is =
    blcm.createInternationalString(serviceDescription);
    service.setDescription(is);
    // Create service bindings
    Collection serviceBindings = new ArrayList();
    ServiceBinding binding = blcm.createServiceBinding();
    is = blcm.createInternationalString(svcbindDescription);
    binding.setDescription(is);
    // allow us to publish a fictitious URL without an error
    binding.setValidateURI(false);
    binding.setAccessURI(serviceURL);
    serviceBindings.add(binding);
    // Add service bindings to service
    service.addServiceBindings(serviceBindings);
    // Add service to services, then add services to organization
    services.add(service);
    org.addServices(services);
    //receive Classification scheme name and value
    String classificationScheme=request.getParameter("classificationscheme");
    String classificationName=request.getParameter("classificationname");
    String classificationValue=request.getParameter("classificationvalue");
    // Set classification scheme to NAICS
    ClassificationScheme cScheme =
    bqm.findClassificationSchemeByName(null, classificationScheme);
    // Create and add classification
    Classification classification = blcm.createClassification(cScheme,
    classificationName,classificationValue);
    Collection classifications = new ArrayList();
    classifications.add(classification);
    org.addClassifications(classifications);
    // Add organization and submit to registry
    // Retrieve key if successful
    Collection orgs = new ArrayList();
    orgs.add(org);
    BulkResponse response1 = blcm.saveOrganizations(orgs);
    Collection exceptions = response1.getExceptions();
    if (exceptions == null) {
    out.println("<br>");
    out.println("<H3>Service Registering is Sucessful!</H3>");
    out.println("<br>");
    out.println("<H3>service information saved is</H3>");
    out.println("<H3>");
    out.println(orgName);
    out.println("</H3>");
    Collection keys = response1.getCollection();
    Iterator keyIter = keys.iterator();
    if (keyIter.hasNext()) {
    javax.xml.registry.infomodel.Key orgKey =
    (javax.xml.registry.infomodel.Key) keyIter.next();
    String id = orgKey.getId();
    out.println("<H3>service key is </H3>");
    out.println("<H3>");
    out.println(id);
    out.println("</H3>");
    } else {
    Iterator excIter = exceptions.iterator();
    Exception exception = null;
    while (excIter.hasNext()) {
    exception = (Exception) excIter.next();
    System.err.println("Exception on save: " +
    exception.toString());
    } catch (Exception e) {
    e.printStackTrace();}
    the exception in the tomcat50-jwsdp/logs:
    javax.xml.registry.JAXRException: javax.xml.bind.JAXBException
    - with linked exception:
    [javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
         at com.sun.xml.registry.uddi.Processor.processRequestJAXB(Unknown Source)
         at com.sun.xml.registry.uddi.UDDIMapper.getAuthorizationToken(Unknown Source)
         at com.sun.xml.registry.uddi.ConnectionImpl.setCredentials(Unknown Source)
         at Publish.doPost(Publish.java:66)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:709)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237)
         at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157)
         at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:198)
         at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:152)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:137)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104)
         at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:535)
         at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:102)
         at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:520)
         at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:929)
         at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:160)
         at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:790)
         at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:709)
         at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:572)
         at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:644)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: javax.xml.bind.JAXBException
    - with linked exception:
    [javax.xml.soap.SOAPException: Unable to create message factory for SOAP: Provider com.sun.xml.messaging.saaj.soap.MessageImpl could not be instantiated: java.lang.IllegalAccessException: Class javax.xml.soap.FactoryFinder can not access a member of class com.sun.xml.messaging.saaj.soap.MessageImpl with modifiers "protected"]
         at com.sun.xml.registry.common.util.MarshallerUtil.jaxbMarshalObject(Unknown Source)
         ... 32 more
    expecting yours advise, thanks!!

Maybe you are looking for