IWeb 08 Published Photo Links Not Working

Hello,
I've recently switched over to iWeb 08 and really dig all the new functions. I am running into one spot of trouble and hope that someone might shed some light on it for me.
I've got a few images that I use as hyperlinks rather than text. The hyperlinks are fully functional while in iWeb and everything is fine in the inspector window, yet when I publish the site, the links are no longer operational.
Anyone have a quick fix for this one? As the images are thumbnails which point towards the full-size image, using text is not an option in this case.
Thanks in advance!
~Lola

I publish to my desktop, then use Fetch to upload the files to my host at netrfirms.
www.lolabydesign.com
The non-functioning thumbnail links are at:
http://www.lolabydesign.com/LolaByDesign/Bead_Gallery.html
I just noticed that some of the text links are inoperable as well, altho they check out fine in iWeb itself - seems kind of random.
The text links that no longer work are at:
http://www.lolabydesign.com/LolaByDesign/Shop_Instructions.html
Thanks for your assistance!
~Lola

Similar Messages

  • Publish Photo refuses to work

    Hi all, I've done a bit of troubleshooting and still cannot resolve this issue. I was trying to load an iphone photo to my mobileme gallery today and it would not work, would not connect. It would give me the following message:
    "Check your MobileMe name and password in settings."
    I did so, even deleting my password and re-entering it. Got the same message. Checked my mail on the phone and that worked. So, it is connecting somehow. Read this article:
    http://support.apple.com/kb/TS1672
    Tried to do the locate, after enacting "push" (which I never use per battery drainage concerns) and that did not work. Could not locate my phone. Turned off the wi-fi I was on in my office, trying to get it through via 3G. So, it actually let me get to the publish page at this point, HOWEVER, at the bottom in the account section, it just perpetually reads "loading." Never actually connects. Went back to mail again...again it was able to retrieve mail. The password that lets me into my mail is working, and should be the same password across the board, so why am I suddenly having issues with publishing to mobile me? I did restart the phone. That didn't resolve the issue. I've tried all I can, still no joy. It does connect, and pull mail, when in mail on my mobile me account, so what gives with publishing. I cannot get it to connect either on 3G or wifi. Just constantly get "Unable to connect to MobileMe" when trying to upload a photo. Oh, and this has worked in the past, if that matters. I have a whole gallery of successfully published iPhone photos. Any clues? Thanks.

    Allan, deleting the account worked. It was weird however. When I first reset it, tried to reestablish the account on the phone, it set it up, but showed the account "inactive." So, that was certainly an unanticipated surprise. I did some searching and found a number of people who also had .mac accounts show as "inactive" on their phone and had to go through the process of setting up a new password. I did so on .mac, deleted the account on the phone again, then re-established it with the new password and suddenly it worked. And not only did it work, but publishing photos to mobileme worked as well. That whole process doesn't seem to make any sort of sense, but after some hurdles, it's now working. Thanks!

  • Flash Global Security & Links Not Working?

    Hi all,
    I am absolutely near some sort of breakdown with my Flash website....I really hope someone can help!
    I am building my portfolio website; I'm using Dreamweaver CS3 (on Mac) and inserting Flash animations in the centre of a table in each Dreamweaver page. All was working fine until I built the Contact page animation on Flash last night. I linked in some external websites to my Blog, Flickr and Twitter and also need a button to launch the user's default mail client.
    When I tested the animation (CMD+ENTR) in Flash the links appeared to be working, if after a few clicks. I then inserted the Contact animation into the Contact.html page on Dreamweaver and tested it in Safari. A dialogue box came up regarding something about security settings and Flash 8 (makes no sense as I am using Flash 9); and I ended up on the Global Security Setttings panel page on the Adobe website. I selected the entire folder the website is in on my hard drive under "Trust Files in these Locations". Now the ENTIRE website's flash animations are not working. There are links to internal pages of the site (i.e. a link to the "Contact" page in the animaiton on the Home page) which are now not working either. No error messages come up when I test the movie in CS3 either. I have refreshed Safari, restarted the Mac and redone the folder on the Global Security Settings panel. Also loaded the entire website onto a PC this morning, all links not working either.
    Actionscript 3 on the Contact page looks like this:
    import flash.events.MouseEvent;
    //---Blog Button---\\
    var getBlog: URLRequest = new URLRequest("http://www.myblogsdomain.com");
    Blg_Btn.addEventListener(MouseEvent.CLICK, eClick);
    function eClick(event:MouseEvent):void{
    navigateToURL(getBlog, "_self");
    //---Twitter Button---\\
    var getTwitter: URLRequest = new URLRequest("http://www.twitter.com/mydomain");
    Twt_Btn.addEventListener(MouseEvent.CLICK, eClick1);
    function eClick1(event:MouseEvent):void{
    navigateToURL(getTwitter, "_self");
    //---Flickr Button---\\
    var getFlickr: URLRequest = new URLRequest("http://www.flickr.com/photos/mydomain");
    Flkr_Btn.addEventListener(MouseEvent.CLICK, eClick2);
    function eClick2(event:MouseEvent):void{
    navigateToURL(getFlickr, "_self");
    //---Email Button---\\
    var getMail: URLRequest = new URLRequest("mailto:[email protected]");
    Eml_Btn.addEventListener(MouseEvent.CLICK, eClick3);
    function eClick3(event:MouseEvent):void{
    navigateToURL(getMail, "_self");
    I'm not 100% sure if the e-mail AS3 I set up is correct, but as none of the links are working I can't test it. I cannot provide a link to the website as it isn't uploaded yet, and I don't really want to upload it not working properly.
    Any help at all would be gratefully received, I'm really, really on the brink of some sort of breakdown. Thanks.

    Thanks Samuel.Wong and Ned Murphy for the information.
    I'm not actually sure what happened but my website suddenly started working again today, I think possibly by selecting "Always Allow" on the Global Security Page as well as inserting every individual file as well as the folder under "Trusted Locations" has also done the trick.
    The external links appear to work when I test the movie in Flash CS3, but the same warning comes up once the movie is inserted into a Dreamweaver html page and tested in Safari. However I think when the links (all except the email ) appear to be working in Flash then it should be just fine once uploaded onto the server. Many thanks for your advice once again.
    Maxx

  • Adobe Edge links not working

    Yeah I have also experienced links not working when I import my .oam file from Adobe Edge Animate also. Is there anything the Muse team is doing to fix this issue? I need a response from you guys by the end of the week. my company website is malfunctioning due to issues with your software. If there is some sort of hotfix please let us know.

    When you install the software illegally, using a volume license, there is a script you can run that will enter all of the adobe servers into your local DNS hosts file so the software can be activated. This makes accessing those domains impossible. This scenario fits the description of your issue, not suggesting anything beyond that.
    The hosts file is in /private/etc/hosts and can be accessed through the terminal:
    sudo nano /private/etc/hosts
    If you see a bunch of adobe servers in there, that is your problem.

  • IPhone 4 Photos Accelerometer not working

    I just received a new iPhone 4 and the Photos application appears to ignore the accelerometer and is always stuck in portrait mode. All other apps work fine, just Photos is not working. This is a new phone setup, not a restore from a previous phone. I have triple checked that the screen rotation lock is off and I've turned off photo sync in iTunes, deleted all photos and re-synced; it still does not work. Anyone have any ideas?

    1) Press and Hold the Home and Wake Sleep buttons until the Apple Logo appears.
    2) If that doesn't work, try a reset, To reset go to Settings, General, Reset, Reset.
    If it still doesn't work, take it in to an apple store so the expert can test it out.

  • Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Import of photos is not working. Moreover 'photos' app is not getting closed, it says 'closing all libraries'. Even it is stopping shutdown/restart of my mac.

    Next time you open the photos application hold down both of the keys suggested and then launch the application in the usual way. If you do this you will be presented with the opportunity to repair your library.

  • Add new document link not working in upgraded sharepoint 2013?

    Hello there,
    Upgraded SharePoint team sites from 2010 to 2013. add new document link not working for shared document in upgraded sharepoint 2013?. it is specially not working on machine where Office web apps set up with this sharePoint server and it
    is working fine with environment  Office web apps not configured with Sharepoint.
    Looking resoluion /suggestion, thanks in advance.
    Regards,
    Sushil

    Hi  Sushil,
    According to your description, my understanding is that the add new document link was not working on machine where Office web apps set up with this SharePoint server after you upgraded SharePoint team sites
    from 2010 to 2013.
    For your issue, it can be caused by integrating Office Web Apps with upgraded SharePoint Site.
    Firstly please make sure claims-based authentication is used by the SharePoint web application that is used to create the new document. Only web applications that use claims-based authentication can open
    files in Office Web Apps. To determine the authentication provider for a web application, follow these steps:
    1.In SharePoint 2013 Central Administration, click Manage web applications.
    2.Select the web application that you want to check, and click Authentication Providers on the ribbon.
    The authentication provider must be displayed as Claims Based Authentication for Office Web Apps to work correctly with the web application. To resolve this issue, you can delete the web application and recreate
    it using claims-based authentication, or you can change the authentication method of the web application.
    Secondly, make sure the WOPI zones match on the SharePoint 2013 and the Office Web Apps Server farm.
    To do this, run the following command on the SharePoint Server:
    Get-SPWopiZone
    The result will be one of the following:.
    internal-https
    internal-http
    external-https
    external-http
    Next, run the following command on the SharePoint Server.
    Get-SPWOPIBinding
    In the output, look for WopiZone: zone. If the results from Get-SPWopiZone don’t match the zone that is returned by Get-SPWOPIBinding, run the Set-SPWOPIZone -Zone cmdlet on the SharePoint Server to change
    the WOPI zone to match the result from Get-SPWOPIBinding.
    If not work, you can try to disconnect SharePoint 2013 from Office Web Apps Server and re-configure Office Web Apps for SharePoint 2013.
    For more information, please refer to the article:
    http://technet.microsoft.com/en-us/library/ff431687(v=office.15).aspx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

  • Fresh Install HCM 9.1 but Links not working. Help please

    Dear All,
    I'm trying to make a switch from SAP to PeopleSoft. I tought it easier to install PSFT since the number of source to install is much less than SAP. However, I kept getting same error where the links not working no matter which environment I tried to install.
    I downloaded all software from eDelivery.
    HCM 9.1, PTOOLS 8.52, Oracle 11g 64 bit, Oracle Client 32 bit.
    First Try:
    Install on windows 7 64bit. Everything works fine until first login to the PSFT and all links not working.
    Suggestion from Hakan is to apply the patch and gave me a link to the old FTP site. I downloaded the 85209 patch but got password.
    Finally I managed to get a customer ID from a friend and downloaded Patch 85211 and applied. But got java error so I scrapped it.
    Anyway, Gasparotto said the environment is not certified and will not fix my problem with the patch.
    Second Try:
    Installed Virtual Box.
    Installed Windows 2008 R2 and applied the SP1.
    Installed everything all over again.
    Ensured the PTWEBSERVER password similar the username.
    Everything works fine but when login to PSFT, again..... links not working and see on the bottom left corner there are some javascript error where they cannot find certain peoplesoft objects..
    Just upgraded to IE 9 because I read somewhere IE 8 is not certified.
    Tried to login again, no error message and everything looks fine but... links not working.
    Logs also looks normal to me.
    Does anyone ever encountered similar issues before?
    Does this is a normal behaviour before tools patch 85211 being applied ?
    Thanks,
    aLuNa
    My APPSRV Log:
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is APPSRV(99)/100
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Cache Directory being used: C:\APPSRV_CONFIG\appserv\HCDMO\CACHE\PSSAMSRV_100\
    PSSAMSRV.12 (0) [11/03/12 09:04:46](0) Server started
    PSRENSRV.2808 [11/03/12 09:04:49](0) PeopleTools Release 8.52 (WinX86) starting. Tuxedo server is RENGRP(92)/101
    PSRENSRV.2808 [11/03/12 09:04:49](3) Switching to new log file C:\APPSRV_CONFIG\appserv\HCDMO\LOGS\PSRENSRV_1103.LOG
    PSADMIN.2124 (0) [11/03/12 09:04:52](0) End boot attempt on domain HCDMO
    PSAPPSRV.1488 (3) [11/03/12 09:13:16 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091316_1488.3, Token=PSFT_HR/2012-11-03-02.13.17.193528/PTWEBSERVER/ENG/XxZ3vyJWXF/S1MoQtG2Wox6wGJA=
    PSAPPSRV.1488 (5) [11/03/12 09:13:21 GetCertificate](3) Returning context. ID=PTWEBSERVER, Lang=ENG, UStreamId=091321_1488.5, Token=PSFT_HR/2012-11-03-02.13.22.193632/PTWEBSERVER/ENG/pS6ec6pIAJJSYc1oOWcNYiR0UFQ=
    PSAPPSRV.1488 (7) [11/03/12 09:13:29 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091329_1488.7, Token=PSFT_HR/2012-11-03-02.13.30.193285/PS/ENG/3GnOezS6D9PUlzwrjPwqexv4ir0=
    PSAPPSRV.1488 (34) [11/03/12 09:18:47 GetCertificate](3) Returning context. ID=PS, Lang=ENG, UStreamId=091847_1488.34, Token=PSFT_HR/2012-11-03-02.18.48.194158/PS/ENG//oJB5tvSHYNzsmZ2Gs4g2vBLUVs=

    alunwawa wrote:
    Does anyone ever encountered similar issues before? Yes, I did already see the same, that was when installed the same with 8.52.00 (without Peopletools patch) or without applying the patch project...
    Does this is a normal behaviour before tools patch 85211 being applied ?Without patch, you have the error you mentioned. How many time I told that 8.52.03 min. is required, I did not go further, but there was some bugs before which make it not working.
    I understand that's rather frustrating for people who wants to jump to Peoplesoft. I don't know SAP, but here you go, Peoplesoft is not a simple toy.
    Unfortunately, if you have no access to My Oracle Support to get the Peoplesoft patches, you have no way but work on Peoplesoft OVM (free of use), and to use them on VirtualBox, the Jim's articles are worth to follow.
    Nicolas.
    PS: @Jim, thanks for the kind words.
    My last install guide is quite old now (PT8.50/Linux), even though it did not change very much within the last tools 8.52. But seeing the number of time such questions have asked over here (PT8.52 on Windows), I'm thinking to write one more, that time on Windows.

  • Purchased Lightroom 5 and Download link not working. Please advise

    I have Purchased Lightroom 5 followed the download instructions and Download link not working.
    I get a dialog box stating that I have Explorer 4 and I need a later version.
    I am in fact running Explorer 10.
    Please advise.
    Bob Spree
    England

    Please see http://forums.adobe.com/thread/1229333 where this topic has been discussed.

  • Photo stream not working after upgrading to maverick please help?

    have upgraded to Maverick from osx lion
    sooo much trouble ......memory low
    photo stream not working
    everything slow
    any ideas?

    On your Mac disable Photo Stream in the System/iCloud preference pane
    and in iPhoto's Photo Share preference pane.
    Reboot and reenable both respectively. That should jump start Photo Stream.
    OT

  • Photo Stream not working today!

    Photo Stream not working today!
    I turn off all devices (iPhone, iPad, iMac), i reset iCloud.com -> Photo Stream, but not working.
    Is Photo Stream service down? (all other services in iCloud is working)

    Hi..
    Try deselecting the box next to:   Automatic Import
    in iPhone > Preferences > Photo Stream
    Then try deselecting Photo Stream in System Preferences > iClould then reselect to reset.
    iCloud: Photo Stream FAQ

  • I just installed Lion on my iMac and Photo Booth not working. What should I do?

    Please provide me guidance how to solve problem. Just installed Lion to my IMac then realized that Photo Booth not working. If I need to reinstall the application, how?
    Thanks
    Duangarthit

    I had same issue and went back to snow lepard, there was a known issue with Lion and a patch was issued last wednesday for Lion it may be ok if you update it I dont know

  • Facetime,App store and photo booth not working OS X

    Facetime, Appstore and Photo booth not working OS X

    I would recommend first doing a PRAM reset. You can find instructions for that in https://discussions.apple.com/docs/DOC-3603.
    Please let us know if that works or not, there are several other things you can try.

  • Links not working correctly in PCUI for CRM

    Hi All,
    We are implementing mySAP CRM 4.0 through PCUI on Portal
    EP6 SP14.
    I have integrated the CRM Business Package 60.2 in Portal.
    Proper User has been created in the backend and assigned Sales Manager Role both in the portal and in the CRM backend.
    We are facing problem of links not working in the CRM Contents. When we click on the links in the CRM Portal Contents ( BSPs) we don’t get the desired application opening.
    When we click any links in the BSP's ( Activity Links in Opportunity Management BSP ) we get a blank page popped up.
    I have the screen shots with me. Any one responding can get the screen shots from me.
    Thanks in Advance
    Rohit

    Rohit,
    Have you maintained configuration in (transaction CRMC_BLUEPRINT_C --> Navigation (URL Generation) --> Assign Object Method to Role)? Be sure that the role that you are using is present and ID Page/Service field correctly points to the pcd url for your portal.
    When testing, it may be helpful to set parameter CRM_URL_BUFFER_OFF = X on the user profile (SU01) to turn off the url buffer. That way changes made above are immediate.
    Best Regards,
    Bernard

  • Photo Booth not working after installing Snow Leopard

    unable to open Photo Booth after installing Snow Leopard. pop up saying my version is 2.03. unable to locate an update on App store. Any solution. ? Thanks to all

    that answered my question. great. my wife has a macbook pro 13 inch (aluminum unibody) and she was getting frustrated with photo booth not working. i was about to uninstall but this answer fixed the issue. thanks!

Maybe you are looking for