IWeb 08 ver 2.0.3 and a NOOB

Just switched to the mac. So any help would be much appreciated. So, iweb crashes every time I try to save the page or try to publish a page. It always acts as if it is going to save but the bar only gets 1/4 of the way across then the whole application shuts down without warning. It dose not affect OS X but it does want to send a message to apple. I've tried to follow the instruction give in other post - deleting com.apple.iweb.plist file and repairing disk permissions. I still get the same error -
The application iWeb quit unexpectedly.
Mac OS X and other application are not affected.
Thanks for any help you can lend. Please keep in mind that I have less than 1 weeks experience with Leopard.

I'm replying to my own message...
I restarted iWeb and now I can publish to a folder again without any problem.

Similar Messages

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

I have garage band ver 10.0.2 and am trying to add effects to an audio track but i have no info button or track info under the track tab. How do i get these things to show up on my program?

In GarageBand 10.0.2 you can no longer add all kinds of effects freely; this GarageBand '11 feature has been discontinued. Pick one of the predefined patches that already has the effects you want.
However, you can add effects from the predefined audio units.
You'll see the predefined effects on the track, when you open the Smart Controls. To add audio units, click the button and enlarge the the smart controls pane by dragging the dividing line to the Track Area upwards.

I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos

I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and say that I need to upgrade my I photo to a newer version. The old mac has no more support from apple in software update so I am not sure where I should go from here. can I use new soft ware with the old mac

The other part of the upgrade message was a warning that once you upgraded you would no longer be able to open the library with the old version which is exaclty what you did and what happened when you choose to continue
The iphoto library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library. Cancel or upgrade.
So now your choices are to not use iPhoto with the previous version using it onky with the newer version, restore your backup from before you did this upgrade or purchase iPhoto Library Manager and use it to rebuild the library using the older version of iPhoto (instructions are on their web site) thereby downgrading it (without projects)
LN

HT4623 I was updating my iPod Touch 5 iOS from Ver 7.0.3 to Ver 7.0.4 and my iPod locked up. Can not reset. The only thing I get is a picture the lightning cable pointing to a circular iTunes icon. Any idea on how to unlock my device? Thanks. Stroke72

I was updating my iPod Touch 5 iOS from Ver 7.0.3 to Ver 7.0.4 and myiPod locked up. I can not reset or restore the unit. The only thing it will do is show me a graphic of thr lightning cable facing up to an arrow and then to a circular blue iTunes icon. I interpert this to mean "connect the iPod to my computer thru the USB cable while iTunes is running. I do this and nothing changes. Total lock up. Any ideas?
Thanks.
Stroke72

You need to restore the iPod...
http://support.apple.com/kb/HT1414
http://support.apple.com/kb/HT1808

Ver 11.1.4 and error missing MSVCR80.dll. It said to reload and I did ... twice. Now I can not open itunes at all.

Did an update to ver 11.1.4 and error message "missing MSVCR80.dll" appeared. It said to reload again and I did ... twice. Now I can not open itunes at all. Any suggestions?

You supply little pertinent about the MBP and the iPhone.
First... on the MBP... Click on the Apple icon.. Top left in Finder...
 > About this Mac > Version...what does it say?
Which iPhone and what is its' iOS Version.

I'm using Adobe Acrobat X (Ver 10.1.4) and up until recently i've been able to convert Autocad 2012

I'm using Adobe Acrobat X (Ver 10.1.4) and up until recently i've been able to convert Autocad 2012 .dwg files to .pdf, but after one of the automatic updates I get an error now that says "Cannot convert file type". Any ideas why Autocad .dwg files aren't supported anymore?

I've tried to print to the Adobe PDF printer and that doesn't work anymore either. I used to be able to go into windows explorer and select multiple files, right click them, then select "Combine supported files in Acrobat...". This method used to work until the latest automatic upgrade.

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make sure

I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make sure Keynote (for example) works with this version of Mac OS X "
iwork was running in my computer just a few moment ago !
Can anyone tell me what can I do? thanks

So I re install it from the iwork's disk
Did you repair permissions and restarted your computer after the installation? Check SU?

I'm fairly new to Mac, just got the iWeb program, I dont have and can not get a Mobile Me account, does this mean I can use iWeb?

I'm fairly new to Mac, just got the iWeb program, I dont have and can not get a Mobile Me account, does this mean I cant use iWeb?

iWeb gives you two other options for publishing...
http://www.iwebformusicians.com/iWeb/Publish-Website.html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link."

I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this.

I have imported all photos and videos from my iPhone 5S into Aperture ver.3.4.5 and now cannot find them. I thought I could open a panel showing all imports and merely list them chronologically, but I don't see how to do this. There are over 1800 photos and about 100 videos, any help to locate where they've gone would be appreciated.

Try to search with a Smart Album for photos and videos taken with an iPhone:
File > New > Smart Album:
Add an EXIF rule fro the "Add Rule" drop down menu: EXIF
and set it to "Camera Model includes iPhone".
Set the scope of the search to "Library"
If there are any iPhone images or videos in your library at all, this search should find them. Then ctrl-click any of the items and select "Show in Project" from the contextual menu.
Generally, Aperture should be showing your last import in the "Last Import" smart album in the "recent" section". And the "projects" view can be sorted by date, so you should see your recent imports.
You may want to check all search fields, if searches are active.

I updated my Lightroom to ver 5.7.1 and and the new features don't show but it says that 5.7.1 is active. also when I start the program it ask me to update. what is the problem?

I updated my Lightroom to ver 5.7.1 and and the new features don't show but it says that 5.7.1 is active. also when I start the program it ask me to update. what is the problem?

because v6.0.1 is the latest...
and you either have to buy it or you must have subscription to get version 6.

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

IWeb window won't load - and all menu options are greyed-out

I've used iWeb before (with a web site set-up), but I tried to open it today and the iweb screen would not open. The program menubar loads, but almost everything,including New Page and New Site are greyed out.
I checked my ME account and it is active and working.
Not sure what the problem is here - any ideas?

Hi, I had the same problem!
After one evening of pulling my hair out, I tried the following:
1. Located the 'domain' file (or package). In my case at /*user/Library/Application Support/iWeb.
2. moved the domain file to the desktop (or somewhere else)
3. Started iWeb. I got the warning that iWeb needed a domain file in order to operate, and I confirmed that I wanted the program to create a new one for me.
4. iWeb started as normal, but with no contents. I closed iWeb.
5. I ctrl-clicked the original domain file on my desktop, and selected 'show package contents'.
6. I ctrl-clicked the new, empty domain file in the Application Support/iWeb directory, and selected 'show package contents'.
7. I deleted everything in the new, empty domain package file.
8. And finally copied the contents from the old (seemingly corrupt) package file into the new one.
9. Hooooray! iWeb started with the old contents intact!

All iWeb options are greyed-out, and can't make a new sites or pages.

Hello,
I am having a very annoying problem with iWeb. Every option is greyed-out! I can't make a new page or site, and it quits as soon as I close the iWeb window. It is version 1.1.2 I have tried installing useless updates for iWeb that did nothing, and I've tried to open iWeb from iPhoto by clicking the iWeb button, which also did nothing. I'm just about to give up on it.
Can anybody please point me in the right direction or have a fix for this? All help will be appreciated!

Hi ineedagoodalias,
The answer to your problem isn't necessarily the simplest, but I'm 99% sure that it will work for you.
You need to delete and reinstall iWeb. Not hard to do; you just need your installation DVD's that came with your machine.
Drag the iWeb.app from your Applications folder to the trash. Spotlight for other elements of iWeb, and trash those as well. Empty the trash and restart your machine.
On your recovery disks, as you move through the prompts, look for "Install bundled software". Customize the install to include only iWeb. After reinstalling iWeb you will be back to 1.0.1.
Update the app to 1.1.1 directly from this link:
http://www.apple.com/support/downloads/iweb111.html
This will get you going, and you can update to 1.1.2 when you are sure everything is working properly. For other FAQ on iWeb, please see this link:
http://web.mac.com/varkgirl/iWeb/iWebFAQ
Be sure to let us know how it goes.
Mark

Hi when i have been using iWeb for the whole week and all of a sudden i wanted to open iWeb but nothing came up? the tab at the top says that iWeb is open but i have no image i can't edit or do anything to my web site i just see my background. please help

Hi
Iweb Wont open on my desktop. in the tab it shows that it is open but i cant see the iweb page?
thanks

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
If Roddy's suggestions fail to help continue with this:
1 - open iPhoto and select a couple of photos.
2 - use the Share ➙ iWeb ➙ Photo page menu option.
Give it a couple of tries if the first one doesn't help.
OT

IWeb 08 ver 2.0.3 and a NOOB

Similar Messages

Maybe you are looking for