IWeb 09 issue with displaying MobileMe Galleries in Weblog

Hello everyone,
I searched but did not see this exact issue. I upgraded to iLife 09 this week and my site from iWeb 08 opened successfully in iWeb 09 (although everything was Red). After adding 3 new blog entries, I decided to publish today. At first, the publish entire site errored out with the progress circle half way. I simply tried again and it finally completed the publish entire site.
I checked my website on-line on a Mac using Safari, and on Windows using I.E. and Safari, and have the same problem on all three.
All of my weblog entries that contain a MobileMe Gallery (both photos and videos) are fine in iWeb just as they were before the upgrade. However, when I view the weblog on line, the Web Galleries do not show up on any of the blog entries. There is just a blank space where they used to be.
I also checked my actual Web Gallery on both Mac and Windows and can view content on both. I repaired permissions before my publish and I have noticed one item since I upgraded to 10.5.6 this week (also). I get a permission error related to "Library/PrivateFrameworks/iLifeMediaBrowser.Framework" that does not appear to get repaired because it shows up every time I repair permissions. I also get another unrepaired permission related to "CoreServices/RawCamera.bundle" but I don't think that is related to this issue.
I have always received excellent help on this forum when encountering an issue and am hoping there is one for this issue. Any and all help is greatly appreciated.
Having read many of the comments here on this forum, I feel fortunate that my issues were not worse. Here is the URL of a weblog entry that should have 4 MobileMe Galleries at the bottom:
http://web.me.com/sabretado/sabretado/Weblog/Entries/2009/2/19Monterey_Bay_Aquarium_and_Fisherman’sWharf.html
Thanks in advance,
Santiago

http://web.me.com/sabretado/sabretado/Weblog/Entries/2009/2/19Monterey_Bay_Aquarium_and_Fisherman’sWharf.html
Your URL contains apostrophe character, iweb javascript code had been changed in web09.
It converts special character in your URL path to UTF escape codes and lost in translation when try to use it.
You galleries are there in the widget mark files, but iweb javascript can not read its own (LOL!) widget markup URL:
http://web.me.com/sabretado/sabretado/Weblog/Entries/2009/2/../../../../Weblog/E ntries/2009/2/19Monterey_Bay_Aquarium_and_Fisherman%E2%80%99s_Wharf_files/widget2markup.html
notice the %E2%80%99, that's UTF character.
Try to remove the apostrophe character from your page name and give them feedback: http://www.apple.com/feedback/iweb.html

Similar Messages

  • Issue with displaying summary in the Page Bottom

    Hi Friends,
    I have an issue with displaying summary in the page bottom. for this i am using command BOTTOM and ENDBOTTOM in Main Window.
    I designed 2 pages are First and Next, in the first it displays PO Header details and Item details in the Main window and also Item details continuious in the Next Page also.
    If the lines are enough in Bottom then it displays the summary. But if the lines are not enough in bottom then it does not trigger the new page, so that it doesn't displays the Summary in Bottom.
    for ex: Total lines of the page 50 and Bottom required 15 lines. In the next page contains upto 35 lines, it triggers the Bottom.
    But if the lines are more than 35 and below than 50, it does not trigger the new page so that it does not shows the bottom.
    Please help me on the same, this is very urgent.I will give a rewatrd if it is helful.
    Regards,
    Subbarao

    HI,
    Try with printing the bottom data with Protect and ENDPROTECT along with your Bottom and endbottom.
    Eg: Protect
    bottom
    text
    endbottom
    endprotect.
    Regards,
    Venkatesh

  • Issue with displaying Unicode Characters returned by a webservice

    Hi, We are developing a mobile application which provides multi language selection (Arabic & English). but we are having an issue with displaying returned JSON which has Arabic text. The output we get is as below. Our .net client throws the following
    exception. Appreciate your kind help and thank you in advance.
    [net_WebHeaderInvalidControlChars]
    Arguments:
    Debugging resource strings are unavailable. Often the key and arguments provide sufficient information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=4.7.60408.0&File=System.Net.dll&Key=net_WebHeaderInvalidControlChars
    Parameter name: name”
    Returned JSON:
    https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar
    Connection ? Keep-Alive
    Content-Type ? application/json; charset=UTF-8
    Date ? Fri, 27 Feb 2015 03:35:43 GMT
    Keep-Alive ? timeout=1, max=100
    Last-Modified ? Thu, 26 Feb 2015 14:43:55 GMT
    Link ? <http://72.44.81.184/~shababcapital/wp-json/posts/131>; rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/119>;
    rel="item"; title="387 Ù?اعب Ù?Ù?اعبة ضÙ?Ù? فعاÙ?Ù?ات اÙ?تدرÙ?ب اÙ?Ù?ستÙ?ر Ù?اÙ?تشاف اÙ?Ù?Ù?اÙ?ب اÙ?رÙ?اضÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/118>; rel="item";
    title="اÙ?جÙ?در Ù?ؤÙ?د استÙ?رار "اÙ?شباب Ù?اÙ?رÙ?اضة" فÙ? دعÙ? Ù?سÙ?رة اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø©", <http://72.44.81.184/~shababcapital/wp-json/posts/117>; rel="item"; title="اÙ?جÙ?در
    Ù?Ø´Ù?د بدÙ?ر اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب", <http://72.44.81.184/~shababcapital/wp-json/posts/55>; rel="item"; title="اÙ?جÙ?در: Ù?دفÙ?ا
    تحÙ?Ù?Ù? أفضÙ? فرص استثÙ?ارÙ?Ø© Ù?Ù?Ø£Ù?دÙ?Ø© اÙ?Ù?Ø·Ù?Ù?Ø© Ù?Ù?بارÙ? اÙ?Ù?شرÙ?ع اÙ?جدÙ?د", <http://72.44.81.184/~shababcapital/wp-json/posts/45>; rel="item"; title="اÙ?جÙ?در Ù?Ø´Ù?د بدÙ?ر
    اÙ?Ù?راÙ?ز اÙ?شبابÙ?Ø© فÙ? تطبÙ?Ù? رؤÙ?Ø© Ù?اصر بÙ? Ø­Ù?د فÙ? احتضاÙ? اÙ?شباب"
    Server ? Apache
    Transfer-Encoding ? chunked
    X-Content-Type-Options ? nosniff
    X-Pingback ? http://72.44.81.184/~shababcapital/xmlrpc.php
    X-Powered-By ? PHP/5.4.24
    X-WP-Total ? 6
    X-WP-TotalPages ? 1

    I originally downloaded it using IE and viewed the content in Fiddler.  Use this code to get the content:
    string url = "https://72.44.81.184/~shababcapital/wp-json/posts?type=news&lang=ar";
    HttpBaseProtocolFilter MyFilter = new HttpBaseProtocolFilter();
    MyFilter.IgnorableServerCertificateErrors.Add(Windows.Security.Cryptography.Certificates.ChainValidationResult.InvalidName);
    HttpClient request = new HttpClient(MyFilter);
    string response = await request.GetStringAsync(new Uri(url));
    MyContent.Text = response;
    Matt Small - Microsoft Escalation Engineer - Forum Moderator
    If my reply answers your question, please mark this post as answered.
    NOTE: If I ask for code, please provide something that I can drop directly into a project and run (including XAML), or an actual application project. I'm trying to help a lot of people, so I don't have time to figure out weird snippets with undefined
    objects and unknown namespaces.

  • Issue with displaying Greek characters in Oracle 11.1

    Hi,
    We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
    I believe that it is a issue with DB settings, although not sure of what is the setting.
    Below is the result after running the query: select * from nls_database_parameters
    NLS_LANGUAGE     AMERICAN
    NLS_TERRITORY     AMERICA
    NLS_CURRENCY     $
    NLS_ISO_CURRENCY     AMERICA
    NLS_NUMERIC_CHARACTERS     .,
    NLS_CHARACTERSET     AL32UTF8
    NLS_CALENDAR     GREGORIAN
    NLS_DATE_FORMAT     DD-MON-RR
    NLS_DATE_LANGUAGE     AMERICAN
    NLS_SORT     BINARY
    NLS_TIME_FORMAT     HH.MI.SSXFF AM
    NLS_TIMESTAMP_FORMAT     DD-MON-RR HH.MI.SSXFF AM
    NLS_TIME_TZ_FORMAT     HH.MI.SSXFF AM TZR
    NLS_TIMESTAMP_TZ_FORMAT     DD-MON-RR HH.MI.SSXFF AM TZR
    NLS_DUAL_CURRENCY     $
    NLS_COMP     BINARY
    NLS_LENGTH_SEMANTICS     BYTE
    NLS_NCHAR_CONV_EXCP     FALSE
    NLS_NCHAR_CHARACTERSET     AL16UTF16
    NLS_RDBMS_VERSION     11.1.0.6.0
    Please help.

    869852 wrote:
    Hi,
    We are having issues with display of Non-English language (for ex Greek) text on Pega-PRPC. The text is stored in a reference table in Oracle DB. However there is not need of translation in PRPC as it has the capability of displaying non-english language also.
    I believe that it is a issue with DB settings, although not sure of what is the setting.
    The first question that needs to be answered is whether the problem is a data storage problem or data presentation problem.
    The query below will answer this question.
    SELECT ASCIISTR(greek_column) from greek_table where key_id = <specific_value>;

  • Performance Issue With Displaying Candidate Details for iRecruitment

    We are in EBS R12.1.3 when we trying to display the Candidate Details page in iRecruitment iRecruitment >vacancies>applicants> click on applicant>   the page spins for  a quite whille to show the results and some times we see the 500 errors..
    We are in R12.1.3 and also applied the  Patch.10427777:R12.IRC.B patch.. is there any  tunnign steps for the iRecruitment  page=/oracle/apps/irc/candidateSearch/webui/CmAplSrchPG

    You have already applied the patch mention in note: Performance Issue With Displaying Candidate Details Page in 12.1.3 (Doc ID 1293164.1)
    check this note also Performance Issue when Clicking on Candidate Name (Doc ID 1575164.1)
    thanks

  • Issue with displaying text in BEx

    Hi all,
    We are facing an issue with displaying text in the query output.
    We have a master data carrying charac ' 0MATERIAL'.When i do maintain master data ,I am able to see medium description in the output.
    Now when i drag 0MATERIAL in bex designer and in properties set display to key and text(medium text), it shows me only the key and it shows some wierd text which is in no way related to the medium description ( that was shown under maintain master data)
    can anyone pls tell me why i am not able to see the medium description when executing the query that too when the text is loaded.
    Pls help
    Regards,
    Suchitra

    But what i wouldlike to know is what about the master data which is present in 0MATERIAL now?
    Nothing will happen to your data.
    Its showing there ...dosent that mean its present and activated?
    They are present n in active version.
    If u change any records they will be in M version..by activating the data...u are converting it to A version.
    Regards,
    Ram.

  • IWeb not finding my MobileMe Galleries

    I've just found the MobileMe Gallery widget and wanted to play around with it to see what exactly it does and what it looks like. I've made a new blank page to try it out and dragged the widget onto the page, but the little floating box says "(No albums or movies)" in the Display option, and the the box on the page says, "Upload an album or movie to MobileMe and then select it from this widget's menu."
    I clicked the "Learn more" link on the floating box and read the help page. It didn't help. It just said that if there's nothing in that Display menu, that I'm either not connected to the internet or I haven't published any albums or movies. Both are wrong, though. I'm connected to the internet; I'm posting this, and have been browsing other sites as well, including my own MobileMe Gallery page...which brings me to my next point, which is that the other condition is also wrong: I do have albums published to MobileMe. Many galleries. And they're all there, they all work, iPhoto is in sync with them, etc. And it's the same MobileMe account, no doubt about that.
    So why doesn't the widget in iWeb seem to know about my MobileMe galleries? Or is there some important fact or concept I'm completely overlooking?

    That has been an ongoing problem here. First try the following:
    1 - go to the System/MobileMe preference pane and log out of MMe.
    2 - login with a bogus username and password like "test" and "test". This clears the caches.
    3 - login with your correct username and password.
    4 - launch iWeb and try again.
    Next, create a new test gallery in iPhoto and publish. Then launch iWeb and try again. Some have said that the new gallery worked to jumpstart iWeb.
    OT

  • Aperture not displaying MobileMe Galleries

    I have a half-dozen MobileMe galleries that I am using to allow clients to view image proofs. They are password-protected and hidden from my Gallery page.
    When I opened Aperture this morning, it does not show the MobileMe item in the project pane. None of the galleries are visible. I tried creating a new gallery with a single image, and I was able to publish it. The MobileMe item appeared in the project pane as usual. I quit Aperture, and when I re-opened it, the MobileMe item is again not displayed.
    When I try to access any of the galleries directly via Safari, but with Aperture open, I get a message that says, "This page is currently being published. Please try again in a moment." I quit Aperture, and then I can access the galleries as usual.
    The only change to my system recently was that I upgraded to OS X 10.5.7 on Friday, and I haven't opened Aperture since the upgrade.

    Let me emphasize that I have not experienced this issue. I suspect that rebuilding the Aperture Library might be of benefit -- try rebuilding the Aperture library. Launch Aperture and hold down the Command and Option keys until the Rebuild Library dialog appears.
    Ernie

  • Issue with Display Profiles

    Hi eb,
    I have a problem with Display profiles. When 2 users are log in, my display profil switch to "Generic RGB" and I cannot change it to any other profil.
    When I restart and log in one user - everything is ok. When I log in second user display profile set to Generic RGB and issue start. When I log out one of them situation is same and issue persist.
    I tryed run Color Sync Utility > Profile First Aid , but no problems found.
    Had anybody same issue?
    THX for ur help.

    Found a temporary solution! Here's the article: http://www.macworld.com/weblogs/macosxhints/2006/02/fuscolor/index.php
    Thanks to Niel from the thread at http://discussions.apple.com/thread.jspa?messageID=4776564&#4776564
    Hopefully the long-term fix is on it's way...
    Good luck!

  • IWeb Doesn't Find MobileMe Galleries

    I've built a Web site in iWeb v3.0.1 and want to post fotos and movies to it from my MobileMe Galleries. Even though I can plainly see existing MobileMe Gallery content both online and within iPhoto, when I drag the MobileMe Gallery Widget to my page, instead of giving me selections to choose, I get the Warning Triangle and the dialog, "Upload an album to movie to MobileMe and then select it from this widget's menu."
    I've fooled around with this every way I can figure without success. Who has an idea how to get my Galleries recognized in iWeb?
    Many thanx in advance!
    DCR
    = = =

    I'm new to Iweb. Am also having trouble getting Iweb to find my Mobile Me galleries. I've tried the snippet below, but it still doesn't work. I put my Mobile Me ID where is says "mobilemeID:, right? Then backslash, then the gallery number. When I do this, all I get is a little flicker in the photo screen on the webpage. The Mobile Me gallery widgit actually worked up until a few days ago when the link went dead. Any suggestions? Am I using the snippet correctly? I saw one person said to "refresh" the Mobile Me galleries. How do I do that? I know the galleries are there because I can share them via email.
    thanks!

  • IWeb issues with comments

    I have read through many posts about this issue but have not been able to resolve my problem. I have been running my iweb site with a domain since the beginning of the year. I have had issues with the comments form not loading properly before but it has always fixed itself. The problem I am having currently has been going on for almost 10 days now.
    I have reloaded my site many times. I have uploaded it without comments, and then with comments again. I have checked my DNS hosting and it is being routed to web.me, I have checked mobileme and my domain is web.me, I have checked iWeb and it has @me.com. Yet, when the comments form loads it goes to mac.com. I have tried this on my hubby computer and it seemed to load fine, yet on my computer and those of some of my friends, have said they are unable to load.
    I am very frustrated and don't know where to head next. I am computer savvy but not enough to get into code and all that. Is anyone able to help me?
    Message was edited by: studentoflife

    Same problem here. The form to add comments on an iWeb blog published on MobileMe is broken. It doesn't load all the objects correctly, and site visitors cannot comment. I wonder if it's some kind of server-side error. When using Safari's JavaScript debug console, I get this:
    Failed to load resource: the server responded with a status of 404 (Not Found)
    /WebObjects/Comments.woa/Contents/WebServerResources/English.lproj/images/commen ts_header.gifFailed to load resource: the server responded with a status of 404 (Not Found)
    /WebObjects/Comments.woa/Contents/WebServerResources/composeComment.jsFailed to load resource: the server responded with a status of 404 (Not Found)
    /WebObjects/Comments.woa/Contents/WebServerResources/English.lproj/images/commen ts_header.gifFailed to load resource: the server responded with a status of 404 (Not Found)
    comment:11ReferenceError: Can't find variable: onPageLoad
    Profile "Profile 1" started.
    2ReferenceError: Can't find variable: authenticate
    OK, all you WebObjects gurus out there--clue us in on this one!

  • Issue with display of decimal places

    Hi,
    In our custom built components we are facing a strange issue with the display decimals  where the data type of an element is "QUAN - Quantity field, points to a unit field with format UNIT".
    If the element has a value of 3000.000 KG the value is displayed as 3000. Where as for an element which has a value 3000.123 KG the same is displayed as it is with the decimals. We tried to resolve the issue by using Text editor or Input field as read only but in vain. The display property in the context are set to default.
    If we change the element data type reference to "Dec - Counter or amount field with Comma and Sign" then all the values are displayed with the decimal places even if decimals are zero.
    As a result we are facing alignment issues for the various quantity related elements displayed on the screen.  To change the underlying data type of the element is a not a solution for us as the data type quan is required for conversion from one unit to another unit.
    Can someone please advise how we could resolve this issue.  We are on NW 7.0 + EHP4 + NW 7.01 SP4, kernel patch level 55 for 7.01
    Regards
    Rohit Chowdhary

    Jameel, Thanks for the answer but this is a not a solution for us. We have around 40-50 webdynpro components and with mutliple views referring to this data element / domain combination. More so the context are bound to database tables / structures . 
    I hope to get a reply from Thomas on possible solution for this. I am not sure if I can open an support ticket for this issue.
    Rohit Chowdhary

  • Internet Explorer 11 issue with displaying value in confirm password text box

    I have one Website which has deployed on Windows 2008 R2 server.
    I have one issue with one Web Page... In my Web page have 3 Text boxes for Passwords like -
    Login          :
    Password     :
    Confirm Password :
    So in this case, when this page load all data fills properly excluding confirm password.
    "Confirm Password" text box always shows Blank. This text box already filled through code as per database value, but not shown value in this text box.
    But same value is showing in first "Password" text box properly.
    This problem occurred in IE 10 and 11 only. Same page is showing properly on other browsers and IE8 also.
    Can you please give me any solution on this issue ?

    Hi,
    For the issue,I would like to confirm if the issue is related to compatibility.
    Please try to use compatibility mode use F12 to check IE8 mode will work.
    For reference about compatibility mode:
    http://blogs.msdn.com/b/ie/archive/2010/10/19/testing-sites-with-browser-mode-vs-doc-mode.aspx
    Regards,
    Kelvin hsu
    TechNet Community Support

  • IWeb won't import MobileMe galleries

    hi there,
    apple claims that iweb can import albums that are published on the mobileme-gallery. however, I created an album via aperture and published it (worked fine), then created a website in iWeb and tried the "insert -> mobileme gallery ->" (hope that's right, using the german version)menu, but everything's blanked out: "no albums or films available"
    hm?

    There's a problem with Aperture galleries and iWeb. Also password protected iPhoto galleries will not display in the Widget menu. You need to publish them unprotected and then add the password.
    If you want to have the gallery embedded in your web page use an HTML Snippet and iFrame code like I've done in this demo page. You can set embedded portion to go directly to the mosaic mode as I've done with it or to the normal grid mode. All it requires is using the right URL for the mode you want. The code used is also shown.

  • Issues with Deploying Struts application on Weblogic Server 10.3.3

    We are trying to deploy a web application on Weblogic 10.3 server domain. The configuration is we have 2 physical boxes with one box running an Admin Server and one managed Server and the other box running only a Managed server. Both these servers are in one cluster. When we deploy a Struts 2 web application on this domain, it works as expected on the managed server running on the same box and Admin server. However, when we do the same action on the managed server, we get an error. In the application we are using Interceptor and the error we see in the log file is Action Interceptor Result ---exception.
    Any help would be greatly appreciated as we have been struggling with this for a few days.
    Thank you
    Sam

    Sounds to me as if you are saving the users' uploaded images somewhere in your application's directory structure - which is going to get blown away each time you redeploy. Why not store uploaded images in a database (there are blogs showing how to upload and display images to/from a DB in ADF if you don't know how). If you search {forum:id=83}, you can find them easily.
    John

Maybe you are looking for