IWeb 09 major bug - losing site - believe it's photo albums and photo pages

I have repeatedly lost my site now 3 times since upgrading.
The problem appears to be when editing photo album pages with a few photo albums on them and then rearranging those albums and pages between sites.
I can't be more specific at this stage, as it's happening relatively randomly, but am curious if others have discovered similar problems.
FWIW I am recovering by using time machine and backups.

I too had major problems with iWeb '09. I was unable even to publish to a local folder without getting an error message "Unknown error" (really, really helpful). I published a site created and maintained by iWeb '08 four times to separate local folders within an hour, not changing the site at all during that period. Only about 90% of the contents were published. Typically what was missing was some photo albums and blogs, although not always the same photo albums.
After some careful poking about in my MobileMe-published site I noticed that some particular pages were not publishing to a local folder. Upon investigation I discovered that some of the photo albums, whilst appearing in the sidebar in iWeb '09, did not appear on the main albums page. It seems that, for whatever reason, iWeb '09 had lost the links to these. I deleted the pages from the sidebar and then turned my attention to Blogs. This was the other area where I noticed that publishing seemed to have a problem.
One of the problems seemed to be that there was a link to a, by now, 'lost' photo album. Editing the link and then re-publishing to a local folder at last cured the problem. I have yet to publish to MobileMe, but at last things are looking good in the 'test' phase.
It seems that, unless your iWeb '08-created site was relatively simple, some editing HAS to be done in iWeb '09 before publishing. I hope that this answers more questions than it poses!

Similar Messages

Acrobat Plugin bug. If print doc that contain album and lanscape pages then it print all pages as lanscape ignoring page orientation.

Try on HP and Kyocera printers

Hi,
Adobe is responsible for that plugin
The people who answer questions here, for the most part, are other Firefox users volunteering their time (like me), not Mozilla employees or Firefox developers. This is not the right place to report this bug.

Can't control the icon iweb generates on iweb gallery album and movie page

Okay - here's the problem. I make a great imovie - share it to the .mac web gallery and imovie sets the icon and I don't seem to have any control over the image it displays. It seems to take part of a screen shot of the first few seconds of the movie but I want to change what is displayed and can't figure out how to determine what image is used for the icon of the movie on the iweb gallery page. I have several movies on the page and want to have a logo displayed - not part of the logo. You can see my frustration at calldrew.com and click on the link for iweb pictures and movies. Thanks so much for any help!

Now I haven't actually tried it but I'm guessin you want to modify the 'poster.jpg' file located in your idisk/Web/Sites/_gallery/xxxxx

After IOS Update 8.1.1. What the heck can I do ?The touch screen is crazy,the websites in search aren't displayingnproperly literally every page or site I go to is messed,and the pages aren't loading correctly and load when I don't want them to just ,

iit's messed and this is disgusting,Send me help for my old IPad 2 ,after IOS 8.1.1. Update I need hands on help and no I'm not under warranty. I can't search properly,websites not displaying properly,none of them and touch screen terribly touchy and it is maddening.

Hi Dee12124,
Welcome to Apple Support Communities.
I am going to get you to do a soft reset that, I will hope fix some of your issues.
To do this:
1. Press and hold the Home button (big circle below the screen) and the Sleep/Wake button (on top of the iPhone) simultaneously.
2. Continue holding both buttons until the iPhone shuts off and begins to restart. This will take anywhere from 10-20 seconds.
3. When you see the Apple Logo, you can let go of the buttons.
If this still doesn't fix your device, what we could do is try resetting the whole device, wiping it. If this is the case, get back to me and I will pose the steps below. I would recommend that you do this AFTER the device is backedup however.
Before you restore your device
Make sure you’re using the latest version of iTunes.
Use iTunes to back up your device. Transfer and sync any additional content to your computer.
Turn off Find My iPhone in Settings > iCloud on your device to disable Activation Lock.
Restore your iOS device
Connect your iOS device to your computer using the cable that came with it.
Select your iPhone, iPad, or iPod touch when it appears in iTunes. In the Summary panel, click Restore.
Click Restore again to confirm that you want to restore your device to factory settings and delete all data and content. iTunes will download the iOS software file and restore your iOS device.
After your iOS device is restored to factory settings, it will restart. Once it does, you’ll see the "Slide to set up” welcome screen. Follow the steps in the iOS Setup Assistant. You can set up your device as new or using a previous backup. If your iOS device has cellular service, it will activate after you restore.

Iweb missing photo pages that exist on my .mac page... can I get em back?

recently upgraded to iWeb 09.... I published a photo page from iPhoto, and all went well - however, now I'm ready to publish another new one, and I notice that what exists on the .mac site has about 5 more entries than my local set as seen in iWeb ... I'm afraid if I publish again, those 5 will disappear forever... how can I get those entries back into iWeb on my mac? is there a way to make the .mac content sync with my macbook?
thanks!
HELP!

I'm just unclear on how my local copy of the website on my macbook is different from the one on .Mac - and how to sync them back up.
You can't sync them back up. There is a iWeb project file named "Domain" on your mac that has the info for your iWeb project. Then there is the published files that are on .mac for your published site. There is no way to convert your published site files back into an iWeb project file. You have to rebuild your lost pages in iWeb. Hopefully you are now clear about the difference between iWeb project file and iWeb published files in that you can not turn iWeb published files into an iWeb project file.

Drag and drop fails on iWeb - a jpeg image refuses to drop on a photo placeholder

About three pages into creating a web site with iWeb 3.0.4, all of a sudden drag and drop is failing. I have a placeholder image I want to replace with a jpeg photo, but neither the photo nor any of a couple of other .jpegs that worked fine on earlier pages will "drop" onto this one.
I've had no luck using Google to look for answers.
Thanks,
Jubal

Where are you dragging the photo from? The media browser, somewhere on your hard drive?
Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.

New iWeb has a major bug!

The new update for iWeb has introduced a major bug.
Previously, if you had ANY text in a text box presented with a drop shadow, that text would become the image of text and a little warning icon would show in the upper right of the text box. If a photo were presented with a drop shadow, the icon would not appear. Same for a text box inside the main text box. It could be displayed with a drop shadow, but its text could not be highlighted and copied to the clipboard, since it is now an image of text, not selectable text.
Between yesterday's iWeb and today's, whatever drives that icon to appear has changed. Yesterday, no icon and selectable text. Today, icon and no selection possible.
All the text on this page was selectable yesterday without any issue at all. Now it's a text image and cannot be selected. Further, this makes the page completely useless for iPad viewing.
I've tested everything on the page that I can think of to get rid of this little cautionary icon. I switched off all image bullets, all separator and image drop shadows. There ore no cross-out words. Nothing works.
The page is here:
http://www.hdslrreview.com/HDSLRreview/Software_2.html
Ironical that it is a review of Final Cut Pro X.

Zapfino is not one of the Web Safe Fonts and so the conversion to an image.
OT

Major bug in Safari 6: previous domain persists in URL bar when clicking a link

I've noticed an extremely weird and significant bug in Safari 6 / Mountain Lion:
When I'm navigating through a site, sometimes when clicking a link, Safari tries to open the corresponding URL on a previously visited site's domain instead of the current site.
For example:
First, I'm surfing on apple.com. Then, I navigate to another site, say estibot.com. On estibot.com, I click on a link that should take me to:
http://www.estibot.com/tools.html
Instead, safari takes me to http://www.apple.com/tools.html, which of course produces a 'not found' error. Nothing wrong with the link; this is purely Safari's doing.
This happens often, and apparently can happen with any site.
In other words, the domain name of a previously visited site persists in the URL, and the page that I'm trying to navigate to is added to the domain of the PREVIOUS site, not the actual site I'm using.
This is a major bug and is often rendering Safari useless for my workflow. How could a bug like this end up in the finished product?
Cheers
Esa

Having the same problem. It is randomly consistent, i.e. some links consistently get redirected to a specific domain. For example, I am experiencing this issue when using Basecamp and links being misdirected to a specific client's website. However, the criteria for why some links redirect and some do not appears random. This issue does not occur in Firefox. This leads me to believe that it is not a DNS issue. May be a Safari/DNS pair issue or solely a Safari issue. We do use an internal DNS (OS X Server) for browsing internal development wbsites which then rolls over to a public DNS. Again, this problem has never occured in Firefox and consistently occurs in Safari.
Safari Version 6.0 (7536.25)
Mac OS X Lion 10.7.4
On a side note...
Safari's strong-handed rewriting in the address bar as you type is crazy anoying. Or should I say "too helpful?" It seems to break the first rule of usuability: don't change the interface while the user is interacting with it.
And the unified address/search is rediculously annoying for developers who use non-complient top level domains for internal development (such as .dev)
And the new inspector seems like a huge step backwards in usuability. (debatable considering I'm probably not as advanced as some developers.)

Bricked laptop b/c of a major bug in the W530 BIOS password!?

I have purchased a W530 (model 2441CTO). I had to add a short/low security but convenient password to protect the BIOS. It that was exactly ** (star-star, easy to remember and fast to type on a French keyboard as it sits next to the Enter key). The BIOS accepted it without any warning.
Now when I reboot, the BIOS asks for the password. But it WILL NO MORE take into account any special character, including the stars, it just totally ignores them. I read (too late) that a dirty way around was to skip the special characters in the password. But in my case it leaves the password empty, and an empty password means read-only mode in the BIOS. By the way, it also does not check if the stored admin password is empty *before* it checks if the entered password is empty (a second programming mistake imho).
I spent a lot of time trying to understand until I read about such an issue that dates back to 2009 !!!
http://forums.lenovo.com/t5/SL-Series-ThinkPad-Laptops/Undocumented-problem-with-BIOS-password/td-p/...
So my question is: what shall I do now?
Send it back for an exchange?
Would a BIOS upgrade (or downgrade+upgrade) bypass this one-way security?
I am really upset by my 1775 euro brick featuring a 4 year warranty that gets half-bricked in a week or so. I just cannot understand how such an ugly and MAJOR bug could go through unfixed till 2013. This is really a serious hit to lenovo reputation.
please do help!

Empty password means no password. The discussion you reference is for an older machine where there was an option to make the bios settings visible but not changeable when there was a pw. I am not going to get into a discussion of how passwords are stored, but I will say that the data stored is encrypted and the date depends on the scan code of the key, so that a password can be entered on one type of keyboard and cleared on a different one. The data stored for an empty password or no password is all zeros.

IWeb won't publish my site, unspecified error

i've been trying for the whole day now to publish my iweb site
every time, it get half way through uploading then simply bums out
it says there was an error publishing the site
that a certain file couldn't be uploaded
it's a different file each time
i'm really annoyed that i'm paying for a service i'm not getting!
i'm using iweb 09 on a g4 emac osx 10.5.6
adsl 1500 kbps connection, only computer using the internet
all firewalls and virus programs disabled
can anyone please help!

MobileMess, lol, i like that
yes, the prob is in publishing, not iweb itself
that is, its a problem uploading to apple's webdav server
I have been able to publish my site, and this is how...
Create a new site in iweb
one by one, move each page across to the new site just by drag and drop
with each page, go File > Publish Site Changes
Once all files are moved over, the original site is automatically deleted
From iWeb that is, you'll need to delete the site folder through iDisk
effectively this publishes each page seperately
all links seem to be preserved quite well
my theory is that apple's server can't handle too many files in one upload
it's getting gunked up and timing out half way through the process
uploading each file seperately seems to solve this problem
once they're uploaded, small changes also upload ok
i have since found this issue prevelant in these forums
it seems to be a major issue with iweb, or more specifically, mobileme webdav
i seriously doubt apple is going to work on this issue for us
so for the time being, small uploads seem to be the answer
hope this helps!

How do I get my gallery photo pages in iweb to publish on my site ?

HI
I have recently upgraded to iweb 09 from iweb o6. I have also upgraded from tiger to snow leopard and now have a terabite size hard drive. Iweb was working great before , but now i cannot get my website to upload correctly using ftp fetch. fetch is not the problem as i tried another ftp and had the same problem. My pages that have gallery photos on them will not show. my website is www.naomigrant.com the pages not responding are paintings sold and paintings for sale page. I have uploaded correctly , published correctly and everything looks like it has worked. But when i go to my site the images are not on those two pages. Images are showing in other pages. when i test it in iweb and it says you can visit your site , everything looks good there and you can see the images. So i am totally at a loss as to what to do. I have spent 3 days trying to fix this so far. Can anyone please help me? Should I reinstall i web?

There is no point in re-installing iWeb, because after you have published it really is not an iWeb problem - if there is something not working on uploading the files, then it is really nothing to do with iWeb after html pages have been created.
If you are using Fetch to upload, then you have obviously published your site to a local folder? If so, are the photos there when you look at your local site? If they are there when you publish to a local site, then it is an error in uploading and if photos do not show, it means that some things are not being uploaded to your server correctly.
Have you tried using Cyberduck instead of Fetch? Cyberduck or Transmit are two of the better ftp programmes to try.

Photo Albums showing up in iWeb but not in published site

I'm publishing to an FTP server using Transmit. The site address is chrisfitzgeraldmusic.com . All of the other pages publish perfectly, but the photo albums page has never published correctly. In the past, some albums have shown up, others haven't. Within the ones that showed up, some pictures were displayed while others weren't. Just today I tried to fix this by deleting all the albums and putting in a single iPhoto album which I also rebuilt. The album displays perfectly in iWeb, but shows up as a blank photo albums page when I publish it to the FTP server. Any ideas? I'm at my wits end.

For some reason not all of the files are getting uploaded. Publish to a folder on your hard drive and open the site with your browser to make sure the photos and albums are getting created as they should.
If you using iWeb's ftp client to upload to your server then try publishing to a folder on the hard drive first and use a 3rd party ftp client like the freeCyberduck or Transmit to upload the files to the server. This might help also: Old Toad's Tutorial #2 - Uploading only those published new or newly edited files when using a 3rd party FTP client.
If you are already publishing to a folder what ftp client are you using? If it's not Cyberduck give it a try. It's well thought of here in the forums.
OT

Rebuilding Photo Pages from Lost iWeb Site

I mistakenly deleted my backed up iWeb domain file after doing a fresh install of OSX. I know there is no way to import the published HTML files into iWeb, so I am in the process of making a copy of my website manually. I am looking for a way to rebuild my photo pages that doesn't require me to look at the published site, identify which photo is on the site, find it in iPhoto, and drag it to my new iWeb site. Instead, what I'd like to do is grab the photo files from iDisk for each photo page, and then drop them into my new iWeb site. However, I can't seem to find on my iDisk where the actual photo files are stored. I suspect I am looking in the wrong place. The files in the iDisk/Web/Sites/Site Name/My Albums/Pages/Album Name/Media/Photo Name are too small and low quality. When I click the download link from the published site, it's the full size file. Where is this stored?

I mistakenly deleted my backed up iWeb domain file after doing a fresh install of OSX. I know there is no way to import the published HTML files into iWeb, so I am in the process of making a copy of my website manually. I am looking for a way to rebuild my photo pages that doesn't require me to look at the published site, identify which photo is on the site, find it in iPhoto, and drag it to my new iWeb site. Instead, what I'd like to do is grab the photo files from iDisk for each photo page, and then drop them into my new iWeb site. However, I can't seem to find on my iDisk where the actual photo files are stored. I suspect I am looking in the wrong place. The files in the iDisk/Web/Sites/Site Name/My Albums/Pages/Album Name/Media/Photo Name are too small and low quality. When I click the download link from the published site, it's the full size file. Where is this stored?

Using Iweb to publish a Company Site need help!!!!!!!!!!!

I have been trying to build a new website for a newly
formed company of mine
http://3rdcoastdistribution.com/
and have been trying to use iweb to
make the site crisper, but I can not add the features
I would like to ie an info request form like at the
bottom of this page
http://3rdcoastdistribution.com/prod03.htm
i was hoping you migt have some advice
also i cannot figure out how to make a photo gallery
in lue of a photo page with a mess of un grouped
photos.
I understand iweb was made for "personal" pages but if
you know of any way around it or another template
based web design software short of dreamweaver please
let know.
also is it possible to publish a page other than .mac?
Thank You,
Jason Schanzer

but I can not add the features I would like to ie an info request form
http://www.varkgirl.com/Varkgirl/Add%20forms.html
+Disclaimer: My website contains various ads, so if you click them while visiting my site, I will receive financial compensation, which I use for materials for my classroom.+
also i cannot figure out how to make a photo gallery in lue of a photo page with a mess of un grouped photos.
http://www.mac.com/web/en/Tips/013C4180-4787-4847-BAAB-319222AFC652.html
also is it possible to publish a page other than .mac?
http://homepage.mac.com/thgewecke/iwebserver.html

IWeb 1.1.1. Sites Won't Open in iWeb 3.0.1

Can't seem to find an answer in this Forum to my problem. After transferring my Domains.sites file from iWeb 1.1.1 (Library/App Support) from my OS 10.4.11 Mac Mini to my Leopard Mini (10.5.8) iWeb 3.0.1 App Support location only the Domains.Sites2 files show up when I open iWeb 3.0.1. Both Domain site files now are located in the '09 iWeb App Support folder but why do the older Domain.sites files not show up in my iWeb 3.0.1 Site Organizer column? The older Domains' file shows the correct size based on all the Sites it contains but does not open when clicked (creates 'backup' when double-clicked). Any help you can offer as to how to actually import my iWeb 1.1.1 Domain files into iWeb 3.0.1 for editing and republishing would be very much appreciated.
Thank you!

Move all of the domain files out of your User/Library/Application Support/iWeb folder to a folder on the Desktop and then copy the iWeb 1 domain file back to the iWeb folder. Then try the following:
1 - close iWeb.
2 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
3 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
4 - reboot.
5 - launch iWeb and see if there's any improvement.
If that doesn't help continue:
6 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
7 - launch iWeb, create a new test site and save.
8 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
9 - move your original domain file from the Desktop to the iWeb folder.
10 - launch iWeb and try again.
Lastly try Koeklin's fix from his post in this topic: Topic : can't open a domain.sites.2
Once you get the domain file functioning you can merge it with any of the other domain files into a new 3rd domain file with iWebSites.
OT

IWeb 09 major bug - losing site - believe it's photo albums and photo pages

Similar Messages

Maybe you are looking for