IWeb 09 not loading on Mac Pro

The problem is intermittent. Sometime I click on iWeb and it only load a shell no data or tools. So I can't update or create anything new. The next time I start the computer after it being shut off iWeb will load just fine.
'

Welcome to the Apple Discussions. It sounds like it might be the domain file. Are there any reports in the Console about iWeb that might give some idea?
You can try these fixes:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your User/Library/Preferences folder.
2 - go to your User/Library/Caches/com.apple.iWeb folder and delete the contents.
3 - reboot.
4 - launch iWeb and see if the domain file will open OK all the time.
If that doesn't help continue:
5 - move the domain file from your User/Library/Application Support/iWeb folder to the Desktop.
6 - launch iWeb, create a new test site and save.
7 - go to the your User/Library/Application Support/iWeb folder and delete the new domain file.
8 - move your original domain file from the Desktop to the iWeb folder.
9 - launch iWeb and try again.
OT

Similar Messages

Yosemite will not load on Mac Pro running OS X v10.7 Lion

Started download from App store and would not install. Have tried many times but no success. Has anyone else had the same issue.

Hello Wayne.
I had the same problem with my MAC-mini Mid-2011.
I did download YOSEMITE three times.
I always had the same failure at my screen.
But now the fourth time the download went through completely.
My Timestamp now is Saturday, 12:00 o' clock AM Germany-time.
Because i don't know where you are living, i think when i tell you the time at CUPERTINO. They have Friday, 3:00 o'clock PM.
Please try the download again. I hope you will be successfully too.
Best regards,
Andrew (computerschmied)

HT2801 cd will not load in mac book pro. Tried different cd's, tried same cd on other mac and it goes in okay. Any ideas?

CD will not load in mac book pro. Tried different cd's, tried same cd in different mac book but it works on other mac book but will not work on initial mac book. Tried pressing command/option/esc. Tried restarting and shutting down computer but still will not load cd. It goes in but pops back out. Any ideas?

lorenzod3046 wrote:
I have already tried compressed air. No luck. How will I be able to get the cleaning disk in to load if I can't load a regular cd?
How will i be able to get the business card in far enough to reach the inner area where the optics probably are located?
Cleaning discs will load. On a MBP that has never been cleaned, run the cleaning 2-3 times. If you use the slot a lot, use the cleaning disc about every 3 months.

2nd generation shuffle won't take charge, not recognized by mac pro.

2nd generation shuffle won't take charge, is not recognized by mac pro. light will not go on

Hi nickh2913,
If you are having issues with your 2nd Gen iPod Shuffle, you may want to try the steps in the following Troubleshooting Assistant:
Apple Support: iPod shuffle (2nd generation) Troubleshooting Assistant
http://www.apple.com/support/ipod/five_rs/shuffle2gen/
Regards,
- Brenden

IMessage and FaceTime not working on Mac Pro and message stating to contact Support came on

iMessage and FaceTime not working on Mac Pro and a message stating to contact Support came on with a verification code. It was working on 8/29 but stopped on 8/30. When I called support to even speak with anyone they wanted $19. I don't want to pay $19 for an Apple problem. I cleared my key chain, also reset my apple ID password but still not working. Works fine on my iPhone.

There is no official public documentation of that error message as far as I know, but according to reports, it can mean (at least sometimes) that the same Apple ID is being used with the iTunes Store or one of the other Apple content stores, and the payment method is invalid. Sign in to the store and review your account. You do not, of course, have to provide any billing information to set up an account to use only with iMessage, as it's a free service.
Otherwise, do what the error message tells you to do. According to reports, you won't be charged for the call if you select "Apple ID" as the product you need support for, and cite the customer code in the alert as the "validation code" to the support representative.

USB superdrive not working with Mac Pro

Is there a trick to getting a USB Superdrive working with a Macpro?
The drive in the Macpro no longer ejects and have tried connecting the USB drive to both the front and back ports - does it not work with Mac Pros?
Any pointers in the right direction would be much appreciated.

I had a problem my superdrive. It would play dvd's and cd's that were already burnt but would not burn blank DVDs or CDs- in the recent past it had no problems burning. In addition, the Finder would not display the superdrive. When I put a blank disc in it would go to Disk Utilities and would not allow burning. With help from Apple I discovered the problem-- The settings in CDS & DVDs had been changed from When you insert a blank DVD/CD "Ask what to do to to "GO to Disk Utilities". If this sounds like your problem try changing the settings to this:
Try going to; System Preferences/ CDs & DVDs
Change these two settings to this:
When you insert a blank CD: Ask what to do
When you insert a blank DVD: Ask what to do
NOTE: If they are already set to this you probably have a different problem. If they are set to Go to Disk Utilitiy this is probably a solution.
And
Then go to Finder Preferences
Make sure that under "Show these items on desktop:" that the checkbox for CDs, DVDs, and iPods is checked.
Try to burn the DVD again (reload Disc- perhaps restart) and try again.
Don't know how these setting changed but they did. It worked for me.
Message was edited by: pj176

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

I have Iphone 5 and mac pro, and i want to transfer pics through idrop. but my iphone not detect the mac pro. How i can turn the idrop on my computer?

The Mac Pro - the desktop computer - does not support Airdrop, if that's what you mean.
Matt

Apps not loading on Mac mini

apps not loading on Mac mini
had system 10.9 it was ok updated to 10.9.2 now apps do not load how can I fix this?
Model Name:          Mac mini
Model Identifier:          Macmini6,1
Processor Name:          Intel Core i5
Processor Speed:          2.5 GHz
Number of Processors:          1
Total Number of Cores:          2
L2 Cache (per Core):          256 KB
L3 Cache:          3 MB
Memory:          4 GB
Boot ROM Version:          MM61.0106.B03
SMC Version (system):          2.7f1
Serial Number (system):          C0*******WYL
Hardware UUID:          572DFA82-74E6-5C85-A5C2-AAA6E8C4359D
<Personal Information Edited by Host>

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar at the top of the screen.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.

Teltra Bigpond Ultimate wireless mobile not working On Mac pro

Can Some-one show me what to do as my teltra bigpond ultimate mobile device is not working on Mac pro but work on my other windows. Teltra staff help me and download new software but it is stll not connected to internet. Spent hours on bigpond support and they could not fix it.
Thank you in advance

Try booting in 32-bit kernel mode.
Mac OS X v10.6: Starting up with the 32-bit or 64-bit kernel

NetInstall image not installing on Mac Pros from Snow Leopard server

Using the System Image Utility, I created a NetRestore image from the Mac Pro machine that was configured in the way that we wanted it (applications, etc.). I copied this image to the server (Server HD 3), and configured in Library/Netboot/NetBootSP0. The image is in Base Image.nbi, and I have NetBoot set up in serveradmin. I have this set up in the images tab in NetBoot:
Default is checked;
Image Name: Base Image;
Enable is checked;
Diskless is not (we're wanting to 'restore' this image on all 17 MacPros)
Index is 2323;
Arch is Intel;
Protocol is NFS.
Comment box info:
Storage Volume: Server HD 3
Kind: Mac OS X NetInstall (Intel)
Language: default
Description: NetRestore of Mac OS X 10.6.2 (10C2234) Volume.
Type: NFS.
When I go to one of the other computers, go through system preferences and select the "Base Image" to restart from, I get a gray screen; then the globe flashes, and then the machine will go to the local hard drive to start up.
The reason I went to a NetRestore image was because the system image utility would not create a netinstall (greyed out) from a volume.
Is there something I am missing here?
Message was edited by: smaugg

So glad its you Mr. Hoffman - your guides are most helpful - thank you so much for what you do.
I did some digging and found out that since im running CS4 and that it trys to run on 64 bit mode but my Lion system and most folks systems I guess are in 32 bit mode - i had to down load some 32 bit Adobe Unit Types from Adobe and replace the ones on my system - restart - and bingo - im no longer getting those errors - see this link where i found this work around:
http://kb2.adobe.com/cps/516/cpsid_51615.html
That fix cleared a lot of the junk that adobe was doing but i am still getting error 1101 - see below
11/26/11 2:36:37.298 PM opendirectoryd: peer appears to be running Mac OS X 10.6 or earlier
11/26/11 2:36:37.298 PM opendirectoryd: got error 1101
Any idea what this is ?

After start up, desktop does not appear on Mac Pro

I was working on my Mac Pro last night, steped away from it for about 20 minutes. The screen saver came on and froze, I was not able to exet out of the screen saver to the desk top. Had to force shut off, waited 1.5 minutes and restarted. As soon as the apple icon went away after starting up, the "beach ball of death" would not go away. I left the machine on for 10 minutes and still nothing, same light gray background and no key/mouse command would activate the desktop to open. This macnine is on it's second graphics card. Any thoughts?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
When you see the gray Apple logo, release the shift key.
If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
*Note: If FileVault is enabled under OS X 10.7 or later, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

IWeb - Do not load the templeates to edit

Help
My iLife09 iWeb 3.0 does not load templeates to edit.
I see templeate when I click view site.
I'm using Mac OSX 10.5.6.
I choose the templeate double-clicking. There appears to edit the templeate, everything is white.

Welcome to the Apple Discussions. Go to your your User/Library/Application Support/iWeb folder and move the Domain.sites2 file to the desktop. Launch iWeb, create a new site (if you can) and see if you have any better success. If so then your original domain file is corrupt. If not then a reinstall of iWeb seems indicated. To do so you'll have to delete the current application and all files with "iWeb" in the file name that reside in the HD/Library/Receipts folder. Next, install iWeb from the disk it came on, apply the latest updaters, reboot, launch iWeb and try again.
OT

Seagate Backup Plus Slim External USB 3 Hard Drive Not Working with Mac Pro

Hi, I have just purchased a brand new Mac Pro. I have three 2 TB Seagate Backup Plus Slim External USB 3 hard drives that just don't jive with the new Mac Pro's. When the drive is connected, I cannot access the drive, read/write or even format. Finder completely locks up and the drive cannot even be force ejected. When I try to format, Disk Utility either spits out an error that the drive cannot be read, or simply locks up. This happens regardless of the OS on the Mac Pro. I am currently running 10.10.2
I have ruled out an issues with the drives, as I have tested all of them on a variety of systems and OS's, including Power Mac, Mac Book Pro, PC, OS 10.7, 10.8, 10.9 as well as on Windows. I have tried formatting in every file system including Mac OS Extended, Mac OS Extended (Journaled), NTFS and exFAT. ALL other systems have no issues with the drives. Apple has replaced my Mac Pro with a brand new one and the drives still behave the same way. Furthermore, I have tested the drives on three other Mac Pro's at work and they all reject the drives. So, on their own, there is nothing wrong with the Mac Pro, or the drives. However, the configuration of them together is wreaking havoc.
I have contacted Seagate, and this was their response:
The most recent version of the Backup Plus drives use the USB Attached SCSI (UAS) standard to increase transfer rates. It's possible that the drivers being used currently on your Mac Pro are having issues using this feature with the standard USB 3.0 drivers installed. I would recommend contacting Apple to check for any driver updates or see if they any suggestions for issues involving drives using UAS.
I have also started a case with Apple Support (Case # 755934373) and am waiting to hear back regarding Seagate's response. I've spent DAYS trying to troubleshoot this and am now at a complete loss. If anyone has any ideas, I'm all ears (or eyes in this case).
Thanks!

Hi danielsh6,
I recently bought the new Lacie Thunderbolt 2 D2 3TB and I had the same problem as you, i have a macbook pro early 2011, those support thunderbolt but many times there is a bug that doesn't let you connect any thunderbolt drives to your computer. The solution I found was installing this update:
Thunderbolt Firmware Update v1.0
Before doing this I would recommend you updating to mountain lion (not yosemite yet as there is still some glitches and more on preview's macbook pro's).
Hope this helped!
Forest

Signed Applet not loading on Mac OS X if using HTTPS protocol

Hi All,
I need to open a trusted applet on Mac OS 10.2. The applet works fine if using HTTP protocol. But if the protocol used is HTTPS the the applet does not loads and "javax.net.ssl.SSLException - untrusted server cert chain" exception comes on the console.
The error comes for both - Verisign and javakey - signed applet.
On seaching for possible solution on the net, i came across following link: http://www.macosxhints.com/article.php?story=20020525101202503&query=Workaround+for+secure+Java+applet+problems
It says that this is Mac's known bug and gives the workaround as:
1. Access the problematic site with Internet Explorer on Windows. Click on the padlock item and export the certificate to a file.
2. Copy the certificate to your Mac.
3. Use the command
sudo keytool -import -trustcacerts -keystore /Library/Java/Home/lib/security/cacerts -file mycert.cer
to import the certificate file to your keystore (substitute mycert.cer with the name of the file containing the certificate). The keystore is password protected - the default password is "changeit".
4. Restart your browser
But the client cannot be asked to do all this to run the applet.
Is this problem being solved by Mac in their java implementation or is there any other possible solution?
Thanx in advance.
Regards,
Charu

I am experiencing the same problem - I notice it does not happen on OS9.2 using IE but appears a problem on all browsers on OSX
Apple gave me the following reply.....
Re: Bug ID# 3268633: cannot load applet class under https connection
Hello Andrew,
Thank you for bringing this problem to our attention. We have received feedback
from engineering on your
reported issue.
Please know that to get Java to recognize the certificate you will need to do
one of two things, depending
on which VM you are using. Since you want it to work with Internet Explorer, we
will assume Java 1.3.1.
In Java 1.3.1 you'll need to add the certificate to
/Library/Java/Home/lib/security/cacerts using
/usr/bin/keytool to import the certificate into the certificate database.
In Java 1.4.1 you should be able to just add the certificate to the keychain
using certtool. For more
details on how to do this, please refer to the information found at
<http://java.sun.com/j2se/1.4.1/docs/tooldocs/solaris/keytool.html>. After
doing so, if you should require
further help from Apple in resolving this issue, we recommend that you request
assistance from Developer
Technical Support. This must be done by filing a Technical Support Incident.
So I am supposed to tell every Mac user to do the above am I?!!!

I have a Mac Pro13-inch, Mid 2010 and a 3rd generation apple tv. why I can not mirror my mac pro to my hdtv?

why can't i mirror my mac pro to my tv using apple tv?

A supported Mac
AirPlay Mirroring in OS X takes advantage of the hardware capabilities of recent Macs to deliver high frame rates while maintaining optimal system performance. The following Mac models support AirPlay Mirroring::
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
Mac Pro (Late 2013)
Your computer does not meet the minimum hardware requirements.

IWeb 09 not loading on Mac Pro

Similar Messages

Maybe you are looking for