IWeb 1.1.2 blurry pictures in slideshow

I have a weird issue with my iWeb 1.1.2. I am trying to create a photo album using Photo template. All the images are high resolution and all of them work well, except one. It is an image of some people in the field (so there are green and blue colours dominating, if this may make a difference).
What is weird is that although picture appears blurry when clicking on its thumbnail, after clicking on this blurry image picture opens in high resolution and without any defects...
I have this problem with only one picture. Changing the order does not help. If I delete this picture then everything is fine with all other pictures.
Any ideas on how to fix it?
Message was edited by: Werdan

James Symons1 wrote:
In iWeb 1.0.2 I make modifications in the .js files to delete the controller and autoplay and loop the music for both Macs and PCs and modifications in the slideshow.html files to prevent the slideshow from looping, remove the reflections, and change the timing of each image to 8 seconds. If I upgrade to iWeb v 2.0.2 will I be able to make these modifications? If so, I expect the changes will be different. Are directions available? Thank you.
First, the only thing you mention that is directly support by iweb2 is removal of reflection.
Now to the other stuff, you can not add sound clip to slideshow.html file directly in iweb2, since it's auto-generated by iweb so QT inspector is irrelevant. (someone here is sending you on a wild goose chase)
However, you still can add sound clip to slideshow.html with the same method as in iweb1.
However due to change in site structure and javascript... there is only one slideshow.html, therefore whatever sound clip your add to slideshow.html file; it IS the ONLY clip will play even when you have multiple photo slideshows.
You can modify javascript to control slideshow looping and timing.
As of directions, they are in my head...

Similar Messages

  • Blurry images in slideshow

    Hi,
    I have a slideshow with a background and transparent PNG files sliding. However, the PNG's look blurry in the slideshow, but when I right-clicked on the slide and opened the images in a new window to check if it was the compression, the image looks just fine!
    So how can it be that the output PNG file that looks perfect when looked at in a separate file window, will look blurry in the actual slideshow?
    See the screenshots below.
    1. Transparent PNG file is blurry.
    2. The exact same picture looks better when opened in a separate window.

    This is usually caused by an off-by-one error in Muse. Browsers will introduce this blur if they're asked to scale an image by a very small amount (i.e. one pixel). I expect there's a code generation bug in Muse that's resulting in this particular image being generated at a very slightly different size than the div it's being placed in.
    Could you send us the .muse file at [email protected] so we can take a look and verify whether this is the cause. Please include a link to this thread with your message. If the .muse file is larger than 20Mb, you can use a service like Adobe SendNow, SendThisFile or WeTransfer. Please also note what page the problem image is on in the file. Thanks.

  • Increasing font size / captions of pictures in slideshow view

    Hello,
    Is there any way to make the caption / font, that appears below the pictures while viewing the individual pictures in a slideshow, larger? I can change the font size using the inspector on the static iWeb page, but when I publish to the website and view it online, the captions below the pictures (in slideshow) are still small / hard to read?
    Thanks and sorry if this is a repost...I can't seem to find an answer to this question.

    Welcome to the Apple Discussions. Cyclosaurus' post in this topic may not be the view you want to change but take a look at it anyway: http://discussions.apple.com/thread.jspa?messageID=8367274&#8367274.
    OT

  • I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

    I bought iPhone 3GS(Used) recently and updated ios 6.1.3 my iPhone is taking blurry Pictures through basic default Cam app.Can anybody please let me know any solution for this?

    Basic troubleshooting steps right out of the user guide are restart, reset, restore from backup, restore as new.  If you've been through ALL the steps and you still have the problem, then you'll need to bring your phone to Apple for evaluation.

  • Blurry picture on second monitor with MB Pro 13"

    My wife has a brand new MB Pro 13". When we attach an external monitor to it (with a digital DVI cable), we have the following problem: When the computer's lid is closed, everything is fine, the picture is crisp. However, when we open the lid and both displays are turned on, the picture on the second monitor gets slightly blurred.
    When I do the same setup with my 15" MB Pro, both computers have a crisp picture.

    A blurry picture means that the resolution is incorrect. Go to the Display preference pane and make sure that the two monitors have the native resolution set properly. If the two monitors have different native resolutions, one will always be blurry in mirrored mode. If the displays are not mirrored, it's possible that one will reset to the wrong resolution on opening/closing the lid.

  • Eliminate White Space in Picture Library Slideshow Web Part

    On my site, I am using picture library slideshow web parts on two different pages, and one of them is giving me trouble with unwanted white space between the photos and the back, pause, forward control buttons (see photo below).
    In an attempt to resolve this issue, I have tried numerous things. I have resized the width and height of the web part itself to many different sizes, but to not avail. I have cropped and resized all of the photos to be the exact same size of 300x200
    pixels. I have used CSS to display the photos to their actual size rather than the standard preview size. With all of this in mind, my second photo library web part on another page works perfectly. This was white space problem was only an issue until
    I resized/cropped the photos in that case. For this page, however, that solution is not working.
    Does anyone have any clue as to how I can remove this unwanted white space?
    Thank you!

    Hi Stacey,
    From your description, you would like to remove white space in picture library slideshow web parts. You used CSS to solve it however a web part still show white spaces.
    Please press F12 and see if there is div tag in white space, if there is, try remove it.
    http://365.webbrewers.com/Pages/webbrewerstest.aspx
    In addition, try edit web part properties > Display with > choose No Title or Description.
    Here is a similar thread for your reference:
    http://social.technet.microsoft.com/Forums/en-US/1e63661f-0183-44e7-843a-cca58a20cddc/remove-empty-space-in-picture-library-slideshow-web-part?forum=sharepointgeneralprevious 
    Regards,
    Rebecca Tu
    TechNet Community Support

  • The camera of my Ipone 4 is not focussing and takes blurry pictures up close...

    The camera of my Ipone 4 is not focussing and takes blurry pictures up close... I also cannot use apps like i-nigma because it won't recognise the sign.
    Can anyone help me with this?

    Hi there Brittney827,
    You may find the troubleshooting steps in the article below helpful.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    Issue not resolved
    My issue is still not resolved. What do I do next?
    Contact Apple Support.
    -Griff W. 

  • How do I sequence pictures in slideshow or movie

    how do I sequence pictures in slideshow or movie
    1. I tried to drag in thumbnail pictures but can't get the page to move where I want to place the pic
    2. Tried to move pictures in movie project, but they are so small on the bottom and seem to come up in threes when I just want to move one picture at a time.
    Thanks! Newbee

    If delivering your content from an LMS, there should be an option to play the content in a separate browser window...without toolbars.  This makes it a lot easier to predict what size you need to build your course.
    After factoring in all the variables and using trial and error on a number of systems, with and without LMSs, I've found a size of 995x627 to be almost ideal.  It's big enough to display most software apps and websites, but small enough to be viewable by users on 1024x768 systems.
    You have to remember that if you have a significant number of end-users on 1024x768 and that's the lowest common resolution you need to build for, then you CANNOT make your screen size 1024x768.  You have to build smaller to allow for toolbars, browser chrome, etc.
    One of the first things any wise elearning developer does when they begin a project, before they start creating content, is to survey their user base and find out what constraints are imposed within which they need to work.  Things like monitor resolution, Flash-player version, LMS, bandwidth all play a part in the success or failure of your project.  Find out early rather than later.

  • SharePoint 2013 shows the same picture library after add more than two picture library slideshow web part in one page.

    The environment is SP2013 with SP1, I had check the KB, but don't have any hotfix about this.
    I had try it on the different fram, also the same result.
    I try it on sharepoint online is work. So I think that must have hotfix about this.
    I find there is someone have the sam problem.
    http://sharepoint.stackexchange.com/questions/70944/picture-library-slideshow-issue-with-multiple-libraries
    Some snapshot about this :
    Vinci Wang

    Hi Vinci,
    Thanks for posting your issue, This is a known issue in 2013.  You could have multiple slideshow
    webparts on a page in 2010, but it won't work in 2013.  As of now there is no hot fixes for this issue. you can try code mentioned in below URL
    https://social.technet.microsoft.com/Forums/sharepoint/en-US/5ca65f7f-770b-4b0f-8e40-d08578a6442b/sharepoint-2013-picture-library-slideshow-web-part-image-not-displaying-correct-size
    Also, check out below mentioned URLs to know more about this issue and fixes
    http://sharepoint.software.tech.answers.ninja/post/70944
    https://social.msdn.microsoft.com/Forums/office/en-US/63b2ce8c-5f31-4a39-934e-6d759e9afa0c/picture-library-slideshow-web-part?forum=sharepointgeneralprevious
    http://blog.vgrem.com/2013/04/27/beyond-the-slideshow-web-part-capabilities-in-sharepoint-2010/
    I hope this is helpful to you, mark it as Helpful.
    If this works, Please mark it as Answered.
    Regards,
    Dharmendra Singh (MCPD-EA | MCTS)
    Blog : http://sharepoint-community.net/profile/DharmendraSingh

  • How can I fix the image size in a "Picture Library Slideshow Web Part"

    When I upload images to be used in the Slideshow Web Part they become skewed because they are different sizes. Is there a way to fix this besides uploading images that are all the same size? 
    Thanks,
    Kathleen

    http://webcache.googleusercontent.com/search?q=cache:bfUcFkD_bxgJ:spcodes.blogspot.com/2012/08/display-slide-show-images-within-fixed.html+&cd=4&hl=en&ct=clnk&gl=in
     Display Slide Show Images within fixed size
    The Picture Library Slide Show Web Part show the images stored in a picture library with slide show effect.
    This slide show web part displays the images with it's original size. Due to this the web part changes its size according to the image size. If we want the slide show to run within the specific size on the page then we need to control the size of the images
    to the fixed length during runtime.
    To achieve this we need to add the CEWP above the picture Library Slide Show web part & insert the following script in that web part.
    <style type="text/css">
    .ms-WPBody TD {
        PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: auto !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
    auto !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px
    .ms-WPBody TD DIV {
        PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: 100% !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
    auto !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px
    .ms-WPBody TD IMG {
        PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: 260px !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
    190px !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px; align: center
    .s4-wpcell-plain {
        PADDING-BOTTOM: 0px; BORDER-RIGHT-WIDTH: 0px; MARGIN: 0px; PADDING- WIDTH: 100% !important; PADDING-RIGHT: 0px; BORDER-TOP-WIDTH: 0px; BORDER-BOTTOM-WIDTH: 0px; HEIGHT:
    auto !important; VERTICAL-ALIGN: middle; BORDER-LEFT-WIDTH: 0px; PADDING- 0px
    .ms-PartSpacingVertical {
        MARGIN-"color:#783f04;font-family:'Courier New',Courier,monospace;" />}
    .style1 {
        COLOR: #808080
    }</style>
    We can fix the height & width of the image in the .ms-WPBody TD IMG css.
    http://sharepoint.stackexchange.com/questions/66028/picture-slideshow-web-part-image-size-too-small
    How to display original images in SlideShow web part
    Step 1. Save below JavaScript code to file, for example in SlideshowObjectInitializer.txt and upload it to SiteAssets Library
    <script type="text/javascript">
    function SlideshowObjectInitializer() {
    ShowPic = (function(ShowPicOrig) {
    return function() {
    var ssObj = arguments[0]; //SlideShow object
    var curPicIdx=ssObj.index; //current picture index
    ShowPicOrig.apply(this, arguments); //call original ShowPic
    //apply some changes to display original picture in SlideShow control
    ssObj.image.src = ssObj.linkArray[curPicIdx]; //display original image instead of web image
    //change picture & container size to auto instead of fixed (by default web image size is used)
    ssObj.image.setAttribute('height','100%');
    ssObj.image.setAttribute('width','100%');
    var cell = ssObj.cell;
    cell.style.width = 'auto';
    cell.style.height = 'auto';
    cell.style.display = '';
    var pcell = ssObj.cell.parentNode;
    pcell.style.width = 'auto';
    pcell.style.height = 'auto';
    })(ShowPic);
    ExecuteOrDelayUntilScriptLoaded(SlideshowObjectInitializer, 'imglib.js');
    </script>
    Step 2. Add CEWP on page where Slideshow web part is located and in the Content Editor tool pane, under Content Link, type
    /SiteAssets/SlideshowObjectInitializer.txt. 
    If this helped you resolve your issue, please mark it Answered

  • Remove empty space in Picture Library Slideshow web part

    I'm using Picture Library Slideshow web part in one of my pages. The web part itself is working fine, but I'm a bit annoyed by the white space the web part is consuming.
    The web part puts lots of empty space between the web part header and the picture and also to the bottom of the web part.
    The Slideshow web part generates the CSS on the fly, so I cannot really get a control of it cause it doesn't have any static CSS classes(that I know of, at least).
    How could I get rid of these white spaces?

    Hi Pekch,
    Thanks for your post.
    You can achieve this using JQuery.
    1.      
    Download
    JQuery to your SharePoint Server, and then add a Content Editor Web Part to the page;
    2.      
    View the source code using IE developer(Press F12), the code likes below:
    <td style="width: 195px; height: 213px;">
                    <div style="..." id="MSOPictureLibrarySlideshowWebPart_ctl00_m_g_ffa17524_ffa7_44e7_974c_1756a39257b9_cell">
                    </div>
    </td>
    3.      
    So now, you can find the control whose id is started with “MSOPictureLibrarySlideshowWebPart” using the JQuery Code below:
    jQuery('div[@id^=”MSOPictureLibrarySlideshowWebPart”]')
    4.      
    Remove the style of the “div” and his parent “td”. Because there is a “Width” attribute in both levels.
    More information:
    http://weblogs.asp.net/jan/archive/2010/10/05/getting-started-with-jquery-templates-and-sharepoint-2010.aspx
    http://www.bennadel.com/blog/1003-Cool-jQuery-Predicate-Selectors.htm

  • Picture Library Slideshow Web Part

    I am able to create a slide show via Picture Library Slideshow Web Part but the title and description will not show up. I have tried all the options but
    only the picture shows and not the picture title. I was hoping to have the picture title appear below the image. Can this be fixed or is it something I have to do without?
    Thank you.

    Hi Sarah,
    According to your description, my understanding is that you want to show Title of the image under the image in Picture Library Slideshow Web Part.
    I recommend to edit the Picture Library Slideshow Web Part and select Title only below image under Display with and make sure that the picture in the picture library has value in Title field.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • How to enlarge picture in slideshow?

    how to enlarge picture in slideshow?

    Drag by selecting the Hero Image to enlarge. Please elaborate your query if that is not what you're looking for.
    Thanks,
    Vinayak

  • I can only post 11 pictures in slideshow??

    Using version 5. It is only alowing me to add 11 pictures to slideshow. Cannot find a wat to page fwd to add more

    Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
    A way to see which images are blocked is to click the favicon (<i>Site Identification</i> icon) on the left side of the location bar.<br \>
    A click on the "More Information" button will open the Security tab of the "Page Info" window (also accessible via "Tools > Page Info").<br \>
    Open the <i>Media</i> tab of the "Page Info" window.<br \>
    Select the first image and scroll down though the list with the Down arrow key.<br \>
    If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.<br \>
    See also [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

  • Shuffling pictures in slideshow

    Discovered iPhoto 2011 doesn't allow for shuffling pictures in slideshow.  Suggestions for software allowing photo shuffling?

    You'll need to define "shuffling"... it's one of those terms that means different things to different people.
    Regards
    TD

Maybe you are looking for