IWeb 3.0.4 problem under Lion X: Why are my movies unable to play after publishing web-site?

No problems with the above running Snow Leopard 10.6.8. Under Lion, I can place movies during the edit phase, set up quicktime to autoplay, and test it and it plays. After publishing the site, the movies do not play. Sometimes a note saying that "a plugin is not available" appears in the movie window. Could this be a Quicktime problem? The movies were placed in iWeb using iTunes from the Media Display and are .m4v files edited in iMovie. The web-site works on iMacs running 10.6.8, and on PC's. Any ideas? Thanks!

Thanks QTKirk. Tried the web site under firefox 5.0 and the movies played! Not sure about the DivX extension for Safari. There is something called 3ivx on my machine that has something to do with Mpeg. Could you give me the steps to remove this from Safari, assuming that it is the extension you were talking about? How would I see what extensions are in Safari? I'm labeling your response with the correct answer to my problem because either way --- I can always use firefox if I can't get Safari straightened out. Many thanks!

Similar Messages

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

I replaced my hard drive and I backed up my files on an external hard drive but when I reloaded my iweb to my imac none of my files were on it so I can't make changes to my Published web site have I lost my files what can I do

By default iWeb keeps its data in (user)/Library/Application Support/iWeb in a file named Domain. Without this file you cannot proceed (other than by recreating the site from scratch using the published version as a reference) so you need to locate it on the original disk.
To confuse matters, Apple have hidden the user’s Library folder in Lion and Mountain Lion to casual viewers, in an attempt to stop new Mac users messing their machines up. To access it, in the Finder go to the ‘Go’ menu and hold down the Option (Alt) key; the Library folder will appear as a choice.

I recently purchased an iMac and found out that I can download OSX LIon for free, but have been unable to redeem on the Canada site. According to their info Canadian systems should be eligible. How do I redeem this on the Canadian site

I recently purchased an iMac and found out that I can download OSX LIon for free, but have been unable to redeem on the Canadian site. According to their info Canadian systems should be eligible. How do I redeem this on the Canadian site?

Please read and follow the instructions at the Lion - Get up to date site. If you continue to have problems you can contact AppleCare (the number is in your owners manual or you can use the AppleCare Contact Info site.

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS

I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users. Why are they in the libary and not in the itunes music folder. Win 7 OS. When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!

Hello RumDog,
I think this article will help you find the media in your library.
Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Discovering and changing the iTunes Media folder location
Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
Mac OS X: Click the iTunes menu and choose Preferences.
Windows: Click the Edit menu and choose Preferences.
Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
You can then:
Note where your media folder is, such as for backing up your media.
Use the Reset button to reset it's location to the default (which is the iTunes folder).
Click the Change button to select a folder for a new location. Once you change this location:
If you make a new or alternate iTunes library, the new location will be used by that library.
Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
From: Where are my iTunes files located?
http://support.apple.com/kb/ht1391
Cheers,
Sterling

I have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a white it says share successful but i cannot find where the movie has been saved???need help

i have final cut pro x-i have been using the share button previously and had no problem.as of today i share a movie to 720hd, and after a while it says share successful but i cannot find where the movie has been saved???need help--i cannot find the destination. can this be changed.it used to go to itunes, home video.thanks, dimitrios

EExactly what settings are you using. Some go to iTunes.

IOS 8 Problem to play video on web site

I updated my iPad Air from iOS 7 to iOS 8 and now I can not to play video on web site drtuber.com.
All my another equipments based on IOS 7 are playing the same video on the same web site normally as usually.
I think that it is a problem with iOS8
Please check and fix this problem.

I can not to play video on www.drtuber.com with ios8 iPad Air. I try to click icon on the picture of video and nothing ....
In the same time I have not problems with the same content on www.drtuber.com if I try to play video with ios7 ipad2 or ios7 iphone4 I May to play video normally

What problems does one encounter when one attempts to download e-Books which are printed in German and purchased through German web sites onto an iPad purchased in the USA?

What problems does one encounter when one attempts to download e-Books, which are printed in German and purchased through German web sites,
onto an iPad purchased in the USA?

No problem whatsoever so long as you have a German store account which can only be registered using a German credit card which is registered to a German street address

Problem just started unable to get on secure web site

Have had WRT54G 6 months no problems getting on my bank secure website. About 10 days ago explorer times out showe problem remote firewall blocking access. called bank called comcast hooked up to comcast without router could get on banks website. called linksys tried what they suggested my phone call was dropped in the middle think tech was stumped. help

1. Go to start>>run>>type: cmd, click ok. A command prompt will open and you will type: ipconfig /flushdns
2. Reboot the computer and now try to connect to the web site.
3. If you still can not connect to that website, turn-off your firewall and pop-up blockers, try to connect now.
4. If still no connection, do a power cycle:Try a power cycle by removing the power cord from the router, then remove the power cord from the modem, wait 60 seconds, plug back in the modem, then plug in the router, wait about 3 minutes for everything to sync up, and then try to access the web page.
Good Luck,
Ttech

Sleep and Wake problems under Lion

I installed Lion on a Early 2008 Mac Pro (MacPro3,1), 2x Quad-Core Xeon 2400 series @ 2.8GHz, 10GB RAM, 120GB OCZ Vertex2 SSD, GeForce 8800GT with dual 24" monitors setup.
I did a clean install of the OS from USB key.
I've run into the following problems so far :
- When putting the system into sleep, it now takes more than 20 seconds for the fans to stop and for the system to finally enter sleep mode.
It took at worse 5 seconds under Snow Leopard for the same action.
- If 'wake for ethernet network access' is checked under energy Saver, the mac will seem to wake from sleep when another computer requests access (AFP or SMB share)
but the graphics card fan will spin up to it's maximum rpm setting, creating a high-pitched noise, just like the first 5 seconds when cold-booting the system.
However, the system won't be available via the network until i press one of the keys on the keyboard (or click the mouse), just like if I woke the Mac manually by myself.
Pressing the key also makes the graphics card go back into normal rpm mode.
- If the screens are already into sleep state (activated via ctrl-shift-eject), you cannot put the Mac itself into sleep by pushing the power button.
Instead, the screens wake up and nothing happens, the mac won't go into sleep. However, the Mac goes into sleep from normal screen activity.
- When waking from sleep, i've got no network connectivity from Ethernet, although System Preferences shows the card as 'connected'.
I now have to restart the Mac to restore connectivity.
I have already reset the SMC and emptied the caches, but the symptoms are still here. Snow Leopard had none of these problems.
Does anyone have the same problems ? Could a firmware update possibly fix these annoyances ?

I am having very similar sleep problems and have a few very clunky workarounds and observations. Observations: closing the clamshell on my MBPro will often fail to put the computer to sleep. The LED stays solid and does not throb, the fan spins and the CPU stays active. It will get hot if this happens for a while. This is probably only happening with the power cord plugged in, though I'm not certain. There are two "classes" of failure. This is the first. The other is the long wake-up: the power button will not wake the computer, nor will spacebar/return/escape hit repeatedly, until it decides its ready. But there is another more puzzling failure: clamshell closed, CUP running, I lift the screen and the login window flashes long enough for me to type my first characters, then the screen goes dark. I close the clamshell and the CPU goes back on, the LED shines brightly, the screen goes dark (no glowing apple on top). I lift and repeat.
I solved this issue by noticing that the screen would light up as I was closing the clamshell. So now I close the screen to about 1 inch from full closure, and then pull it back up to see not the login window, but my desktop ready for work. It seems like display, CPU, and power management are all out of sync.

Mac mini shut down problems under Lion

Since I installed Lion on my Mac mini (mid 2010, 2.4GHz Intel Core 2 Duo) I cannot shut down the Mac mini any more. I always have to shut it down by pushing the power button. Can anybody please help me? Thank you.

Hello, Yes, I see the gray spinwheel which goes on for ever.
In the meantime I have installed the lion update and I have uninstalled all applications which I do not need any longer. What I also realized is that if I do not tick "open same windows when restarting again" (I don't know the exact English version as I am using the German one) the shot down does not work properly - as mentioned above. At the end I believe I found the solution now:
- Lion update
- all apps which I don't need anymore: deleted
- all USB, Firewire etc. drives "eject"
- Shut down
It works.
Hope you also find the solution for your problems.
Best reagards

Magic Mouse problem under lion...it´s jumping ...

hi there
i got a big problem with my magic mouse after installing a new audio interface (RME BABFACE) .... after installing and restarting the system, the magic mouse jumps to corners and clicks even when I don´t push "click" on it... it goes totally crazy.... you can´t work with that... t
on my mac book pro the magic mouse works perfect !! ... so it is a software thing...definitely
i repaired the hard drive permissions and checked them also.... no success.
anyone has an idea or did had some similar problem ?
i also started a thread in RME forum but no answer so far...
my system is mac mini i7 with lion 10.7.4

Hi ruddager --
Have you tried different batteries?
Like plain AA batteries. Or the Lithium AA batteries?
What are you using for a mouse pad? Have you tried a different (plain) surface?

Ssl certificate problem under lion (mail,safari)

Hello,
After a timemaschine backup recovery to my imac (mid 2010) lion os x 10.7.1 there is a strange behavior with ssl certificates in mail and safari !
Every time mail starts new it ask me to trust my mobile.me ssl certificate, what i do of course, but at the next start it appears again, same for ssl websites in safari every time a ssl popup to accept...
What i have done til now:
Repair permissions
drag the ssl certificate icon in the popup to the desktop and accept it manually
keychain utility edit all these ssl certificate and accept manually
mail:reenter account passwords accept ssl certificate again
reset keychain
this behavior appears at all account on the imac
ssl certificate are marked in the keychain utility as trusted
now I'm at the end of my knowledge....
can anybody please help, please !
Thanks
Tobias

Hi Simon,
As suggested by “TP” check where the certificate is stored. The certificate must be installed in the personal certificate of the computer account and not your personal account. Also you can check by running below command in command prompt to check
where the issue is going wrong as stated by “Alan” in this thread.
certutil -f –urlfetch -verify <your_certificate>.cer
In meanwhile, also go through beneath link for more information.
1. How to Import a Server Certificate
2. Exporting/Importing SSL Certificates Between Windows Servers
Hope it helps!
Thanks.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Hi when i have been using iWeb for the whole week and all of a sudden i wanted to open iWeb but nothing came up? the tab at the top says that iWeb is open but i have no image i can't edit or do anything to my web site i just see my background. please help

Hi
Iweb Wont open on my desktop. in the tab it shows that it is open but i cant see the iweb page?
thanks

Try the following:
delete the iWeb preference files, com.apple.iWeb.plist and com.apple.iWeb.plist.lockfile, that resides in your Home() /Library/Preferences folder.
go to your Home()/Library/Caches/com.apple.iWeb folder and delete its contents.
Click to view full size
launch iWeb and try again.
If that doesn't help continue with:
move the domain file from your Home/Library/Application Support/iWeb folder to the Desktop.
launch iWeb, create a new test site, save the new domain file and close iWeb.
go to the your Home/Library/Application Support/iWeb folder and delete the new domain file.
move your original domain file from the Desktop to the iWeb folder.
launch iWeb and try again.
If Roddy's suggestions fail to help continue with this:
1 - open iPhoto and select a couple of photos.
2 - use the Share ➙ iWeb ➙ Photo page menu option.
Give it a couple of tries if the first one doesn't help.
OT

I had to reload all my programs after a hard drive problem. Now certain songs are skipped over or only play for a sec or 2 then it jumps to next song. all songs played before. Some are Itune bought and some are my old music.

I had to wipe my hard drive clean and reload all my programs. After reloading Itunes, I noticed that some songs will not play, they are skipped over, or the songs plays for 1-2 secs then it skips on to next song. Any ideas what I did wrong? All songs played before and some of affected songs are bought, some are my old library I copied off of CDs

TimT wrote:
I had been thinking that the hard dri've is starting to fail on me but then I thought about the fact that, If I play an MP3 and the player freezes up or starts jumping through the mp3 file, Then I restart the player and start the same MP3 agian and this time it plays normally, Is it really a hard dri've problem?
Could be a lot of things unfortunately, from corrupt firmware, corrupt format on the disk, a problem with the mainboard, or a problem with the hard disk.
I figure that if the hard dri've was damaged it would always freeze up on the same file at the exact same point in the music wouldn't it's
Not necessarily. It could be just an intermittent fault.
I want to Format my Zen Touch and reload the Firmware to start from scratch, but I first want to backup my 28 GBs of MP3 and WMA files. However I noticed that when I transfer the files to my hard dri've, all the ID3 Information is gone. Now adding ID3 info to 28GB of files will take days!
Strange. Did you edit the tag data on the player? If so what happens is the tag data changes are made in the Music Library but not in the files themselves. There's only one way to write the changes back and this involves getting a copy of MediaSource 3. You then transfer the files back to the PC Music Library, and use an update function to update the files (the PC Music Library will have the same tag data as the Music Library on the player). One problem is that MediaSource 3 is very large, and not available from Creative as a download. I can try and get a copy to you if you can't find it elsewhere.

Aperture running very slow under Lion

Lift and stamp adjustments takes forever and Processing of images takes hours under Lion OS.....may have to switch back to Snow Lepard

My Aperture 3 is medium fast after a reboot (8-core MacPro, 6 GIG), but starts to get really slow after the swap file size gets above 100 meg). I then need to reboot BEFORE Aperture freezes up on me.
A3/64 was FAST under Snow Leopard... still got slow once in a while. It is happening way more often under Lion.
There are about 10+ threads on this -- Apple, please acknolege you are aware of the problem and working on a fix
I process about 6,000 pics a month - 1-2 concerts a month -- DavidKellyPhoto.com

IWeb 3.0.4 problem under Lion X: Why are my movies unable to play after publishing web-site?

Similar Messages

Maybe you are looking for