IWeb 3.0.4 will not publish changes.

I have not updated or made any changes to my system. I am using Leopard. Suddenly, iWeb is not working. I edit my homepage, but when I publish, the changes do not appear online. I have tried several times; I have even delted the home page and created a new one from scratch. But every time I publish, it just shows the previous version. I'm trying to change a link for one of the words on the page, but it won't work. Help!

I am having the same problem. I created a new website with iWeb and when I test the connection everything is ok. The site page listing on the upper left side of the window is red and next to the site name there is a small icon that looks similar to an RSS feed icon. When I click on PUBLISH ENTIRE SITE that option grays out but nothing happens. In the past when I have published websites next to the site name there is a circle that shows the progress of the upload and when completed the list turns blue. I have cleared cache, quit iWeb and restarted the computer. I do have multiple usernames on this computer each with a different iWeb website, but none of them are logged in.
Godaddy is the host and I called their support line and all my settings are correct. Although they tried, they could not help me beyond that. My iWeb version is 3.0.3 and I am running on OSX v 10.5.8.
I have had similar problems in the past with iWeb not publishing changes, but usually after I do the things above it will work.
Please help! Thanks.

Similar Messages

IWeb 09 will not publish

I just upgraded from iWeb 1.1.2 to iWeb 09. I then made a number of changes to my website. I have attempted to publish the site dozens of times since I made the changes. The site will not publish. The publishing process seems to be correct. I get the "site has been published message, but when I visit the site the changes are not there.
Has anyone out there had this problem?
Thanks,
Jack

Versions of iWeb previous to '08 use a domain.sites file and published to Finder/Go/iDisk/My iDisk/Web/Sites/iWeb.
iWeb '08 converted the file format to domain.sites2 which was not successful for a lot of us. I ended up rebuilding all my sites. This version also dropped the iWeb folder on your iDisk and publishes to Finder/Go/iDisk/My iDisk/Web/Sites as does iWeb '09.
Also .Mac was changed to MobileMe for some reason.
You will note these differences in the two URLs.
I have never tried to convert a site made in '06 to '09 without going through '08.
As I pointed out, the conversion is not perfect and you should deleted and redo the sections that don't publish correctly.
If I was in your situation, I would start afresh on a new, blank domain file and copy the content that you want to keep over from the published version of your old site to the new domain file..

Iweb will not publish...

iweb will not publish. i keep getting error message saying I need to sign in but i'm ALREADY signed in. this mobilme stuff is a mess and i am not happy about this...
any suggestions on how to resolve this issue would be greatly appreciated...

I can usually get thru on the second or third try using the File->Publish to MobileMe menu option repeatedly.

Any version of Flash (cs3-cs5) will not publish my file..

Hi all,
this is the first time i encounter this problem.. I had the problem where a file would not open correctly which was also addressed at this forum. But this one is different. this file was created (from what i remember) in Flash 8, then opened/saved in all possible flash versions for updates in time.
While it will open just fine, it will not publish. The publish window with the percentage will open up for a split second, then it will close with no messages whatsoever, no actionscript errors, nothing. F12, the same thing again. No possible settings could solve this. I am willing to send the file for testing of course, have tried to publish using Flash cs4 and Flash cs5. I thought of going back to Flash 8 by opening the file and saving to a previous version but as soon as i open the file in Flash cs3 (while the file has been saved as cs3) it will not open the file with an error message that i cannot remember right now.
So the problem might lie in how Flash cs3 saved the file, but it will open just fine in cs4 and cs5 so the file is not corrupt in any means..
any ideas?
George
p.s. I tried deleting EVERYTHING off the stage and the library and yet it wont publish.. tried copying all frames on another empty file, couldnt publish either...

Hi,
Try using different machine

I have ios7 on my iphfone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps. the error is both phones need to be ios8, my iphone4 will not allow changing to ios8. can anyone help. Thanks

i have ios7 on my iphone 4 I now have a iphone5 with ios8 I cannot access the cloud to download my contacts and apps. the error is both phones need to be ios8, my iphone4 will not allow changing to ios8. can anyone help. Thanks

Contact Apple and speak to someone in account security.

Contribute CS3 will not publish Flash Player

A few months ago the company I work for bought Contribute CS3
to edit our website. The homepage of our website contains a Flash
Player file. When I edit and publish this homepage Contribute will
not publish the Flash Player file this section just shows up blank
stating movie not loaded when I bring up our website. The same
thing happens even when I do a 'send for review' before I actually
publish the page. I have administrator rights through Contribute to
edit this website therefore I am confused as to why Contribute will
not publish this Flash Player file. I have also tired to reinsert
the Flash file while editing in Contribute and still the file will
not publish. Would anyone know why this would happen?
Thanks!

Is this occurring with other Web CS applications or only with
Contribute CS3? For general troubleshooting of Web CS products
please go here
http://www.adobe.com/go/kb401401
If this does not address your issue, submit an incident
request via the product support page
http://www.adobe.com/support/contact/

Lightroom 5 will not publish a new gallery to SmugMug.

Lightroom 5 will not publish a new gallery to SmugMug. It will allow me to add new pictures to an existing gallery, but I get the message "Failed to create an album on SmugMug. Please try again or contact support." I have never previously had a problem like this, Lightroom has always worked seemlessly with SmugMug. The latest version of the SmugMug plug in is installed. Any help would be appreciated as I do have some galleries to put up and this is killing my workflow. Thank you.

You need to check in Finder using get info (command-I). Make sure that the destination that you have set in Lightroom has write permissions for you. Also double check that the destination is really in the right place and not trying to write into a root folder on your main hard drive or some such.

Muse 2014 will not save changes.

Muse 2014 will not save changes. Just freezes when asked to save. Cannot do a save as either. However, can still work on file… but unable to save. Very frustrating losing work and wasting time! Any thoughts would be welcomed.

Zak,
Thank you for the speedy reply. I have been having issues since Saturday. Works sometimes and then not. Restarting computer sometimes works… but a pain in the butt to do! Is starting to drive me crazy.
Also when I try to quit Muse, well it stays open… sort of. Image is on screen, but not functional. Weird, to say the least.
Attached is a files. I did open it earlier today and managed to do some work and save it. Now nothing after a few hours of work and thought was being saved as I did “command S” very frequently. It is very, very frustrating and brings me back some 25 years ago when crashes were expected and common. Today, not so much! I am not a rookie and would like to know what the issues are asap… if possible.
Many thanks for your help.
Paul
Paul D. Heaslip BES, RGD
Third Wave Creative | Cambridge, ON Canada
studio: 519.260.2603 | mobile: 647.407.5067
www.thirdwave2.ca

IWeb will not publish to Mobile Me

I made several changes to our iWeb site last night and have published to the default Mobile Me location. While everything seems to publish correctly it obviously isn't happening.
All the changed page icons in iWeb remain red instead of turning to the published blue.
The old site is there but several pages/links are missing and the correct password for the photo galleries does not work.
Ideas on how to resolve this issue?
I am currently republishing to see is that resolves the issue. This is the 3rd re-publish.

If this Apple doc doesn't help:
MobileMe: Troubleshooting iWeb publishing issues
...MobileMe live chat support is now 24/7 — see this announcement.

IWeb will not publish after 1.0.1 update

Just chiming in that I am having the same problem. I add a page to my site and it logs in to .Mac but crashes during the upload with the message "Publish Error: An unknown error occurred." And I just spent 30 minutes talking to the applecare people and they had no idea what to do. So, as many of us here have done, they suggested I back up my pages from where they were saved to my hard drive and then re-install the original iWeb off the disc over the old version.
(For this advice I bought AppleCare? LOL!)
I'll give it a try, but will have to live without the update for now, and hopefully I won't lose the pages I've already worked so hard to build. I will also send feedback to Apple. Hopefully they will come up with a fix for the problem once they realize so many of us are having problems.
Powerbook G4 Mac OS X (10.4.5)

Hello,
I'm having big issues too!
I can't publish my site anymore. It was fine, then I made the usual updates to my site (new pics, etc u name it).
Tried to publish it, it took ages, then at some point I got "Error while publishing: an error occurs while publishing the file "pagetop10.png".
http://freak6767.free.fr/Temp/iWeb%20error%20ju.png
I'm publishing to my .mac account straight from iWeb.
I do use a symbolic link of the "domain" file on both of my G5 and PowerBook, so I can run the original "Domain" file off my iPod.
But it's not the cause here, cause even running off the domain file in the iWeb folder didn't solve the problem.
The G5 is still on 10.4.3 and iWeb 1.0, while the powerbook is on 10.4.5 and iWeb 1.0.1, so, again, I don't think it matters as I still can't get the site to be published without getting an error. (it's a different *.png that can't be loaded everytime)
I've tried erasing my whole site on my iDisk, and republish all (hold option key in File>>Publish), no luck...
I just don't get it!
Help! lol
iMacG5 2GoRam, PowerBook Ti 1Ghz 1GoRam Mac OS X (10.4.3)

I get a MobileMe Popup and it will not publish

When I try to either Publish entire site or Publish changes I get a tiresome MobileMe popup asking me to join MobileMe. I am already a member. I just want to publish the updates on my site and it will not let me. How can I get rid of it and publish without tiresome interference?

Try this suggestion from a MobileMe support person:
"First, please make sure you have quit out of iWeb. Then I would suggest resetting your MobileMe System Preferences. To do this, open the MobileMe System Preference, sign out, and enter a random set of letters and numbers for the MobileMe member name and password, then press the Return key. After you receive notice that the name or password is invalid, close System Preferences, reopen the MobileMe System Preference, and reenter your MobileMe member name (without the "@me.com") and password.
Then open up iWeb again and re-publish your site."
If that doesn't help, you could try the suggestion at the end of this thread:
_Annoying iWeb Startup! HELP!_
If still no luck and you prefer not to wait for more possible suggestions, MobileMe live chat support is now 24/7 — see this announcement.
By the way, your Public Profile indicates you're running Mac OS X (10.5.5) — if that's true, you should upgrade to 10.5.8 via  menu > Software Update... and then update your Public Profile.

Flash will not publish + FLV question

Hello,
I am currently building a game in Flash CS4, but am stuck due to a Flash problem. I have searched the forums for a sollution, but have yet to find one.
The Problem:
Adobe Flash will not export, or publish my .FLA file, nor will it create a .SWF at the chosen destination under the publish settings. Whenever I try to export/publish my .FLA, the export/publish pop-up window opens, and the progress bar runs all the way through. Once that is done, the window which normally appears immediately afterwards, in order to test the flash, does not appear.
Furthermore, Flash seems to have deleted the .SWF, and any other files I wish to publish the moment the publish/export process is completed.
The strange thing about this problem is that I may be lucky and have Flash actually export and publish correctly on its first go. However, when I try again, it won’t publish/export until I restart flash.
This problem happened on three separate windows machines (Vista and 7) under both Flash CS4 and CS5.
Note:
I have discovered that this problem may be related to the many embedded FLV video clips I have created for the game’s character animations (6+ characters with 30 very short animations each).
These animations were rendered in a 3D CG software, which were then edited in Adobe After Effects, and exported as .FLVs for use in Flash.
Oddly enough, once I’ve deleted all the embedded FLV clips from the library, Flash will once again publish and export. This is not an acceptable solution to my problem, however. I already searched for any corrupted FLV files, but could not find any.
My questions are:
1. What can I do to make Flash publish/export once again, while having my embedded .FLV clips within the library? Is there something I am over-looking, or any settings I must change in Flash?
2. Which settings (in Adobe After Effects) are best to export .FLVs for use in flash?
3. If I cannot use FLVs, what other options do I have, in order to use my CG animations in Flash? I tried PNG sequences, but Flash complains about low memory, and crashes (FLVs were working great up until now).
Any help would be greatly appreciated. Thank you in advance.

I've also experienced problems with the Publish process dropping out and failing to complete - no error messages in the Output pane or Compiler errors, just a total hang of the Publish status bar (and no published files...).
I can't say I've pinpointed the exact cause of this, but it may be related to having all objects on the Stage locked (possibly when they are not placed in the main canvas area).
Adding a new layer and creating a new object seems to help. If the publish process (including TestScene) has stalled, restart Flash and reload the movie...
Hope that helps! It's kinda scary watching that Publish bar disappear into nothingness when you've got literally hours/minutes/seconds left to get the thing built and running :-)

Flash file will not publish SWF

I am a novice when it comes to flash so please bare with me on this one.
I have recently taken over a project started by another person who has been let go due to lack of performance and other issues.
He has created a FLA file and an .exe file. But I am have been asked to place the movie on to the internet.
The FLA file that I have will not let me publish an SWF file to be uploaded to the internet, in fact it will not let me publish anything.
I have changed the publish setting but when I go to publish it the SWF file is not created.
I just want this file in SWF format and for it to autoplay when the website is loaded.
Let me know what I am doing wrong.
Thanks for your Help in advanced
Travis
Extra Information:
I have used a exe to swf converter to convert the EXE file that was already made into a SWF file for the internet.
This does make an swf file but the file is not editable and will not autoplay once it is uploaded.

Any suggestions here? I am having the same problem (minus the part about .exe's):
http://forums.adobe.com/thread/465031?tstart=0
Double checked my publish settings, the path is correct. I have tried exporting a movie to my Desktop, does not work. Tried copying content to a new file, same problem. When I publish, the dialog shows up and a SWF even shows up for a second in the Finder, but then disappears.
I really need to work with this file. I have submitted a support ticket to Adobe, and am awaiting their reply (not holding my breath). Please HELP!

My Project will not Publish

I was working with Captivate v.1 and upgraded to v. 4. Now I can publish some projects but others will not. When I click the Publish button nothing happens. I do not get an error message. I have tried changing folders, and names and tried to publish as an .exe file and a .swf file and still nothing.
I am currently working on 3 projects with this problem and a deadline looming. I REALLY don't want to trash them and start over.
Help!

Hi there
You might try the following:
1. Turn off compression - Sometimes that will help.
2. If that doesn't work, try closing Captivate and performing a search and destroy of the settings file.
?:\Documents and Settings\??\Application Data\Adobe\Adobe Captivate\captivate_v40.dat
?=Drive letter
??=Your logged in user name
Rename or delete the file and restart Captivate.
3. If all else fails, try creating a new blank project sized identically to the original. Then copy all the slides from the original and paste into the new. Then try to publish.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

HP Officejet Pro 8500 will not recognize changed ink cartridge

Replaced with just purchased new (out-of-the-box) Cyan XL ink cartridge as prompted but still received error message to replace cartridge. Message will not change no matter that I tried:
a. power printer off/on several times.
b. removed/returned all four ink cartridges
This question was solved.
View Solution.

For everyone who has this problem with the 8500 rejecting known good ink cartridges. I finally found a solution from a third party.
(1) Remove the ink cartridge that the printer is rejecting. Look inside the printer ink cartridge well and see a small rectangular plastic button midway between the ink tube and the chip reader. This plastic sensor is causing the printer to reject the cartridge.
(2) Look at the ink cartridge on the mating side of the plastic button and see a small rubber bulb in the end of the ink cartridge. The pressure in this rubber bulb is supposed to push on the plastic button in the printer. But for various reasons it does not set the sensor to “off”.
(3) To correct the problem, place a small piece of stiff tape over the end of the ink cartridge to cover the rubber bulb. DO NOT cover the ink tube or the sensor chip well. The tape should be about three inches long and ¾ inch wide. Use stiff tape like duct tape. Not flexible table. The objective is for the tape to increase the pressure the rubber bulb is supposed to impart on the plastic sensor button in the printer.
(4) Reinsert the ink cartridge in the printer. Problem solved 98% of the time. If not, there is something wrong with the sensor switch inside the printer and this solution will not work.
(5) Good Luck. Cheers!

IWeb 3.0.4 will not publish changes.

Similar Messages

Maybe you are looking for