IWeb 8.0 quits when trying to publish to .Mac

I updated my site, played around with the layout and try to upload to .Mac. iWeb quits when it's trying to connect with .Mac. Any ideas?

I'm having similar problems, though more severe (I am losing data)...just created another post: http://discussions.apple.com/thread.jspa?threadID=1073862&tstart=0
I think there is some SERIOUS issues with iWeb and I am completely stuck with it a reoccuring nightmare right now! If anyone knows what is going on, please let us know...

Similar Messages

  • Iweb showing unknown error when trying to publish

    I haven't updated my website in the last couple of months...I've been waiting for all of the kinks to be smoothed out with the new moibleme. Now when I go to publish iweb 'prepares to publish' and then gives me a message "Publish error- an unknown error has occurred" I have no idea what to make of this, could someone help please?

    Have you updated iWeb to the latest version, 2.0.4? Have you tried publishing to a folder? It that works then the site files are OK and it's a MMe connection issue.

  • Error message when trying to publish to iWeb

    Got following message when trying to publish:
    Publish Error: Asn error occurred while publihing file "/Web/Site/
    iWeb/Dryton/Welcome_files/
    navbar1rollover.png".
    What does this mean? How can i fix.

    If you're publishing to .Mac, try File > Publish All to .Mac

  • I receive the following error message when trying to publish site changes to iweb: "Can't create the file "shapeimage_2_link_0.png." The disk may be damaged or full, or you may not have sufficient access privileges." Can anyone assist?

    I receive the following error message when trying to publish site changes to iweb:
    "Can’t create the file “shapeimage_2_link_0.png.” The disk may be damaged or full, or you may not have sufficient access privileges."
    Can anyone assist?

    Try the troubleshooting steps under "Fix iWeb" here...
    http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
    ... and then republish.

  • IWeb Crashes When Trying to Publish

    My iWeb has been consistently crashing anytime I try to publish a site. I was hoping updated versions, would correct the problem, but that did not help.
    I have repaired permissions and deleted the iWeb plist file, yet iWeb still will not publish to MobileMe. It also crashes when trying to publish to a folder.
    Any ideas?

    Tried this solution with plist deletion and permissions repair and just the same, iWeb continues to crash on publish and, it seems, while still logging into mobileme.
    discussions at:
    http://discussions.apple.com/thread.jspa?threadID=1011286
    and
    http://discussions.apple.com/thread.jspa?threadID=1080694
    give me ideas to what the problem could be but no conclusive procedure seems to be out there.
    Help, anyone?

  • Keep getting error message when trying to publish imovie '08

    I keep getting the error code -34 when trying to publish a medium size movie to itunes. Any ideas on what to do now?
    thanks,

    That error usually means "Disk Full". Could that be the issue?

  • Business Catalyst not fulling uploading site when trying to publish ???

    Can anyone help me please. I am trying to update some changes to a site I am creating but for some reason it keeps stopping upload at 76% upload when trying to publish. I have shut the program down, restarted my mac, logged in and out and in again to adobe, cleared cache and history, deleted business catalyst site and started a fresh, created a new site name and still the same problem except with new site it stops at 99%. Help please.

    Hi Everyone,
    Apologies for the recent trouble publishing from Muse to Business Catalyst servers.
    The issue has been isolated to be occurring on sites on European Datacenter only and the cause of the same is being investigated at the moment.
    Have added an announcement on http://forums.adobe.com/community/muse, which will be updated once the issue has been fixed. You can also track the issue status at http://status.businesscatalyst.com.
    Thanks,
    Vikas

  • Help! The "publish" option is grayed out when trying to publish to Facebook  blish to Fa

    The problem is stated above - the grayed out option when trying to publish to Facebook...

    Try the fix posted from Franchi Panchi in this topic: My publish button on iphoto is grey and...: Apple Support Communities.
    OT

  • Illustrator CC unexpectedly quits when trying to launch app on MacBook

    Hi. I'm having problems trying to launch Illustrator CC on my MacBook. It keeps unexpectedly quiting when trying to open. Any advice or assistance would be appreciated. Thanks! Below is the link to the error message I am receiving.
    http://pastebin.com/awUypGQu

    I had the same issue, but when i updated Suitcase Fusion to version 5 (free), it opened fine.

  • I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

    I keep getting error code 3131 when trying to publish a ping playlist -- help!!!

    Same problem. I make playlists on Ping so the listeners of my podcast can easily download the songs I talk about. But for **** near 2 weeks now I can't edit a playlist or add a new one. When are they gonna fix this?

  • Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Why do I get Publish Failed Error Message when trying to publish a project to SWF. I am using Captivate 6 (32 Bit) Version 6.0.1.240. I have tried clearing the Cache and renaming my Preferences folder

    Try the troubleshooting tips here:
    http://www.infosemantics.com.au/adobe-captivate-troubleshooting/basic-troubleshooting-tech niques
    You may have something in your project on one of the slides that is tripping up the publishing process.

  • All non-apple apps unexpectedly quit when trying to save

    All (non apple) applictions, i.e. photoshop, illustrator, maya unexpectedly quit when trying to save, import or anything else that requires a dialogue box.
    I have had this problem with individual apps, and I usually go in and delete the prefpane folder and that fixes it, but this is multiple apps and nothing is working. Help

    ave you repaired Permissions and Verified/Repaired DIsk?
    Repair Permissions:
    This should be done after all software installs and updates.
    1. Navigate to Utilities/DiskUtility and launch Disk Utility.
    2. Choose your volume (usually the second icon)
    3. Choose "First Aid" tab
    4. Click on "Repair Permissions"
    Also run "verify" disk. If the disk needs repair:
    Repair Disk:
    Steps for using Disk Utility
    1. Insert the Mac OS X Tiger Install disc or Install Disk 1 that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair.
    If you repair errors run it until no errors found.
    -mj
    [email protected]

  • I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    I am trying to make a time lapse video with Premier Element 13. When trying to publish it at about 15% of work done it stops and in a new screen it says an unknown error, what am I doing wrong?

    Click on the blue Internet Recovery in nbar's post. That is a link to what computers can run Internet Recovery.
    Do a backup,  preferable 2 separate ones on 2 drives. Boot to the Recovery Volume (command - R on a restart or hold down the option/alt key during a restart and select Recovery Volume). Run Disk Utility Verify/Repair and Repair Permissions until you get no errors.  Reformat the drive using Disk Utility/Erase Mac OS Extended (Journaled), then click the Option button and select GUID. Then re-install the OS.
    OS X Recovery
    OS X Recovery (2)
    When you reboot, use Setup Assistant to restore your data.

  • Client ADI App File Server Connection error when trying to publish report.

    Our users are having intermittent problems when trying to publish reports from their Client ADI process to Excel. They are receiving the error:
    "An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"
    The problem is this issue will be present for a user and then for no reason that user will be able to publish reports again. Or several users will get this error and one user will be able to publish reports. The only consistency is when it errors out they get this message. The listener appears to be up and running as well.
    We are running 11.5.10.2 and ADI version: 7.2.12
    Any helps or tips would be appreciated.

    "An error occurred while attempting to establish an Applications File Server Connection. There may be a network configuration problem, or the TNS listener may not be running. Nodename:"Please see these MOS docs.
    ADI: Troubleshooting Connection Problems with ADI/GLDI [ID 70669.1]
    Troubleshooting the "Error Occurred While Attempting to Establish an Applications File Server Connection" [ID 117012.1]
    How To Validate FNDFS For Applications Desktop Integrator - ADI [ID 364796.1]
    ADI: Unable To View Reports In ADI [ID 1018797.102]
    Can not View Reports Submitted through ADI/Request Center [ID 135128.1]
    ADI RRA:Prefix When Connecting to Server with Muiltple Apps Instances [ID 201492.1]
    ADI Application File Server Connection Error [ID 146220.1]
    Thanks,
    Hussein

  • Adobe Captivate 6.0 fatal error when trying to publish

    Currently working on Adobe Captivate 6.0 and recently have experienced a fatal error message when trying to publish my project. The fatal error message creates a backup and requests to restart Adobe Captivate.

    Hello ,
    Welcome to Adobe Forums!
    Could you please check the exact version of Adobe Captivate you are using (Go to help > About Adobe Captivate)?
    Are you having the same issue with other projects as well ?
    Please make sure the project files and published folder should be on local computer and not on any network location.
    Thanks
    Himanshu

Maybe you are looking for

  • Crystal Report Date Prompt  Query from SAP BW

    Dear Support, Using Crystal Report 2008 and Query is design In SAP BW Date Prompt is made mandatory in Query at Query Designer. Problem:  Requirent is that Date promt shoud take value currentdate-1 when report is excuted first date prompt will show i

  • HP Photosmart Scanner Doesn't Work in Yosemite

    After upgrading to Yosemite my HP Photosmart 3200 printer scanner lost scanner. There are four ways to use scanner on Mac that I'm aware of  - from preview, from Image Capture, from system preferences, and from built-in printer/scanner web page. In t

  • Trifold brochure in Pages for iPad???

    Hello, I'm trying to make a trifold brochure in the pages app for iPad. I thought a template would be available but I must have been mislead thinking that the app would be similar to pages for Mac. Does anyone know how to do this? i can't even figure

  • Using escape characters(\n,\t and etc) in JSP

    Hi, I need to format a jsp UI with out using any html code or CSS. My end clients are having text based email utilities which does not support html or CSS. So I am generating a email template based on JSP by using session data for dynamic values. Eve

  • Clear password cache

    Does anyone have a method to clear the password cache programmatically? I want to prevent access to password protected block diagrams after I've done some block diagram changes but without restarting LabVIEW or navigating the Options menu Thanks Al