IWeb and Arles Image Web Page Creator

I've been using Arles Image Web Page Creator on a friends Windows computer to almost effortlessly make pages with thumbnails of many, many images. I have over a hundred yearbooks with about many pages each to turn into web pages and was wondering if IWeb can do the same thing as Arles, and, if not, can anybody recommend a Mac application that will. Thank you very much.

I have this problem as well. When trying to create a new podcast blog entry:
"The application iWeb quit unexpectedly after it was relaunched. The problem may have been caused by the 3ivxVideoCodec plug-in."

Similar Messages

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • I've lost the arrows on my Safari toolbar that allow me to browse back and forth on web pages. Any  solutions guys?

    I've lost the arrows on my Safari toolbar that allow me to browse back and forth on web pages. Any  solutions guys?

    Thanks everyone! Felt a complete twit. Went to view, customize toolbars and then dragged the arrows back into the toolbar.  No idea how we lost 'em though.

  • I've lost iWeb and thus my web design.  I must start from scratch.  Should I reinstall iWeb 09 and use that, or is there a better way?

    I've lost iWeb and thus my web design.  I must start from scratch.  Should I reinstall iWeb 09 and use that, or is there a better way?

    The file you really need is named Domain.sites2 which resides in your   Home/Library/Application Support/iWeb foldler.  It's independent from the iWeb application. If it's not in there do you have a backup of your hard drive from an earlier time? 
    Resinatll iWeb 3 from the iLife 09 disk or wherever you got it from originally and then try what's described below:
    In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

    I just upgraded to Lion and switched my web page from MobileMe to Godaddy. But since upgrading to Lion a video I placed on my web page no longer shows up. instead I get "plug-in failure". That didn't happen until the Lion Upgrade what do I do?

    What's the format of your video? That will give you a hint as to what plugin is failing (or missing).
    If you don't know, what's the URL of your site - it shouldn't take long for someone to work out the specifics.

  • Just moved to ISP PLUSNET and now loading web pages is dead slow

    Just moved to ISP PLUSNET and now loading web pages is dead slow.
    Like loading google will sometimes take 30 seconds to 1 minute but it used to load in a fraction of a second on my previous ISP.
    Sometimes a new URL will take over a minute so I hit Stop Loading This Page and then try again and sometimes it might load instantly, or if not, it might continue to just drag on again.
    It's so frustrating it's like being back on dial-up connection - but worse.
    It feels like PLUSNET have put something on my Mac to slow it down.
    PLUSNET has a restriction on how much I can use per month, which my previous ISP did not have, but according to PLUSNET's usage checker I am nowhere near the max, ie, I am allowed 10GB per month but the checker is showing I have used less than 100 MB so far this month.
    I wonder if the PLUSNET usage checker is slowing down my usage coz it's really noticeable that it has only started to run slow since I moved to PLUSNET.
    When I run a broadband speed check it always shows the feed coming in at around 5500 kbps or so which should be OK.
    PLUSNET told me to go through their test page and I got to the part where it says install a Virus checker and an Adware checker but I'm not sure which ones to use coz I heard some of those checkers are themselves plants that infect you with a virus or keystroke logger.
    Also I have Block Pop UP Windows running on Safari but yesterday a window popped up so that blocker seems to have been compromised somehow.
    I have 17GB available on my HD of a total of 38GB.
    Can anyone help me with this problem please?

    (First, if yours is an Intel Mac, check that Safari is not running in Rosetta, which is enough to slow it to a crawl. If you are running Snow Leopard, run Safari in 32 bit not 64 bit.)
    Adding DNS codes to your Network Settings, should gives good results in terms of speed-up:
    Open System Preferences/Network. Double click on your connection type, or select it in the drop-down menu. Click on TCP/IP and in the box marked 'DNS Servers' enter the following two numbers:
    208.67.222.222
    208.67.220.220
    (An explanation of why that is both safe and a good idea can be read here: http://www.labnol.org/internet/tools/opendsn-what-is-opendns-why-required-2/2587 /
    Open DNS also provides an anti-phishing feature: http://www.opendns.com/solutions/homenetwork/anti-phishing/ )
    Wikipedia also has an interesting article about Open DNS:
    http://en.wikipedia.org/wiki/OpenDNS
    Whilst in System Preferences/Network you should also turn off 'IPv6' in your preference pane, as otherwise you may not get the full speed benefit (the DNS resolver will default to making SRV queries). If you want to know what IPv6 is:
    This is Apple's guidance on iPv6:
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/8708.html
    Click on Apply Now and close the window.
    Restart Safari, and repair permissions.
    If that didn't do it, then try this as well:
    Empty Safari's cache (from the Safari menu), then close Safari.
    Go to Home/Library/Safari and delete the following files:
    form values
    download.plist
    Then go to Home/Library/Preferences and delete
    com.apple.Safari.plist
    Repair permissions (in Disk Utility).
    Start up Safari again, and things should have improved.
    More useful information here:
    http://guides.macrumors.com/SpeedupSafari
    Less likely, but possible, is that the slowness is caused by a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
    If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
    This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
    http://www.versiontracker.com/dyn/moreinfo/macosx/33696
    Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network.

  • HAVE ONE WEB PAGE OPEN AND SUDDENLY ANOTHER WEB PAGE OPENS

    I can have one web page open and suddenly another web page will pop up. Why? It doesn't happen all the time. Like I said suddenly.

    Another thing you can try doing is scanning for Malware:
    Download and Install MalwareBytes Anti-Malware, run a full Scan. [http://www.malwarebytes.org/ http://www.malwarebytes.org/]
    Download and Run TDSSKiller [http://support.kaspersky.com/faq/?qid=208283363 http://support.kaspersky.com/faq/?qid=208283363]
    Download and Install Microsoft Security Essentials [http://windows.microsoft.com/en-US/windows/products/security-essentials http://windows.microsoft.com/en-US/windows/products/security-essentials] (not an official endorsement, but I personally recommend MSE as an awesome permanent anti-virus)
    Double check for all Windows Updates.
    What is the website that opens up? Is it always the same, always different, one of a few, etc?

  • Can I used Dreamweaver CS5.5 to learn to build and style a web page? I see the CC version but I want to use the earlier version. THx

    Can I used Dreamweaver CS5.5 to learn to build and style a web page? I see the CC version but I want to use the earlier version. THx

    you can use the 30 trial and/or purchase from a 3rd party.
    for the trial:
    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
    Lightroom:  6| 5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5.5, 5 | 1
    Contribute:  CS5 | CS4, CS3 | 3,2
    FrameMaker:  12, 11, 10, 9, 8, 7.2
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

  • Storing username and passwords in web pages on safari

    Hi folks
    I am using an iPad 1 and wish to change my previous decisions regarding saving usernames and passwords for web pages within the safari browser.
    I guess I have hit the "do not save" or similar option at some stage and I now wish to recall the username and password in future.
    Any help would be really appreciated

    Make sure that Settings > Safari  > AutoFill > Names And Passwords is set 'on'. To be able to store them for sites that you've previously said 'no' to you may also need to clear Safari's history and cache : Settings > Safari > Clear Cache (and Clear History). And possibly clear cookies : Settings > Safari > Clear Cookies

  • IWeb Help! Changing web page name from Blank + activating Inspector?

    I am back once more as I am having difficulties. My first problem is that I am unable to change the name of a blank web page to anything else apart from 'Blank'. I have typed in a new name, it turns red, but as soon as I press enter it returns back to 'Blank'. I am having real difficulties here as I am presenting my site very soon at University. I have not had problems up to now. To repeat, I am unable to change the name of my web page that I recently opened to anything but 'Blank'... any suggestions?
    Secondly, to activate Inspector... one does what exactly? I have clicked on inspector but I cannot actually seem to activate it (in terms of been able to do anything once it has opened?) I know these are daft little problems but very annoying. I was looking for the web count in there but had no joy, I just want to be able to activate inspector... any suggestions?
    Thanks for your time here.

    jayjournal1 wrote:
    ...to activate Inspector... one does what exactly?
    Most of the Inspector's functions require an element (such as a text box or image) to have been first selected by clicking once upon it. With an element selected in iWeb's main window, the related controls in the Inspector will no longer be grayed out.
    Page names can be changed by clicking once on the name in the sidebar (on the left side of the iWeb window) and then in the Inspector, click on the Page tab (the second one). Type in your new page name and hit Return.

  • IWeb and .Mac images are dark when viewed with PCs--how to fix?

    I do my Photo editing in iPhoto on an iMac or an iBook, and the images look fine. Once posted to a .Mac or iWeb page, they still look fine on my Mac monitors, but when viewed on PCs and PC laptops, they are MUCH darker... The sites look terrible. The brightness on the nonMac monitors is turned up already.
    Is there something special I should do to get images to appear correctly on nonMac machines?

    Thanks for the responses. This has been a problem for a couple of years and this is real advice! I even had this problem with a book published through Apple. Anyway...
    I didn't follow Barbara advice (OK, I'm slow, but I couldn't quite figure out where the gamma setting was), but I did use Falcon01's suggestion to use the sRGB IEC61966-2.1 profile.
    I then reviewed and re-edited the relevant pictures. In this case, they are pictures of my girlfriend's condo she is trying to rent (mostly slightly off-white walls (aren't they all?) and dark, rich parquet flooring.) First, the pictures were darker, and I could adjust the exposure to much brighter, which helped a great deal. It did, however, introduce lots of color artifacts (pinkish blotchy walls). I drastically reduced the saturation which (good) made the walls look fairly normal, but (bad) made the rich wood flooring look drab and grayish. For this purpose, this will be satifactory--the pictures now at least are bright enough to not look dark and dank, and people can see what the rooms look like.
    When I try this on important pictures of people and such, this approach makes me nervous. Most pictures will look awful if I boost expsoure and drain the color out. How do others handle this? Thanks in advance. BTW, here is the revised web site if interested.
    http://web.mac.com/curtishaymore/iWeb/B7EC3471-1B51-467B-8C79-01CD335FC856/Libra ry%203.html

  • Does any one knows, How i can make a slideshow on iWeb to my welcome web page?

    Can any one help please!
    How to create ore make a slideshow with buttons the can be controlled from the visitors on the welcom page in iWe ?? Example: "When you go on Apple website and press (iPhone) for example, the slideshow stars automaticly, also you can choose or click on the slide to open it's informations".

    There are dozens of ways to create banners and slideshow and you can see a few here...
    http://www.iwebformusicians.com/Banner-Slideshow/Banners.html
    http://www.iwebformusicians.com/Banner-Slideshow/Slideshow-Showcase.html
    Here's a whole bunch of jQuery sliders to look at...
    http://vandelaydesign.com/blog/web-development/jquery-slideshow/
    Most slideshows are created using an unordered list and their images can be made hyperlinks to other pages by wrapping the link to the image file in an anchor tag...
    <li><a href="http://www.domain.com/page.html"><img src="http://www.website.com/folder-name/image.jpg" /></a></li>

  • My Google Map was Changed by iWeb to The MobileMe web page!!!?????

    I had a previously published site that included a Google map for directions. After editing a different page in my site and publishing, iWeb changed my google map to Apple's corporate address and the map was replaced by the mobileme web page. I have tried to overrite the page, deleted the page and constructed a new one but I can only get the mobileme webpage. It won';t accept my requested address...Any suggestions or anyone else having this problem?

    It's done that to mine as well. That's not the only issue that has arisen since the transition to MobileMe. Based on what I'm reading here in the discussions, it looks like there aren't any solutions and most likely won't be until Apple releases either an iWeb update or does some serious work on the iWeb hosting feature of the MobileMe service. It's frustrating. I'm sure they're aware of the problem and are trying to solve it.

  • IWeb and Comcast personal web site

    Has anybody ever used iWeb to post web pages to a Comcast personal web site?  I am impressed by what I can make with iWeb, but have completely failed when I try to use it with Comcast.  Comcast suggests uploading files by ftp, but I can't find them on the Mac and the posting options in iWeb don't seem to work with Comcast.  Any suggestions?

    What version of iWeb are you using - iWeb 08 or iWeb 09?
    If iWeb 09, then click on the site name on the left hand side and there is a drop down menu with all your publishing options - one of these is publish to MobileMe, then ftp to server and then publish to a local folder.
    If you are using iWeb 08, then under file, there will be two options - one being to publish to MobileMe and the other to a local folder.
    If you want to upload your files manually, then you would need to select publish to a local fodler and then use Cyberduck to upload your html and css files to Comcast.  Cyberduck is a free and dedicated ftp programme.

  • When I try and print a web page in the print screen ALL the Print Frame options are greyed out. It won't let me print a page as I see it. I need to pring a page as is. How do I do it in the new 8.0??

    I go to print and try to select the radio button to print all frames, but It's not working

    The '''Print Frames''' options are greyed out unless the web page is made with Frames. I-Frames don't work the same.
    Check out this '''''frames test page''''' - http://www.draac.com/framestest.html <br />Is the '''Print Frames''' part of the print dialog box active?
    As far as printing a page as you see it, many web pages use '''print.css''' files for print-media. The print.css specifies exactly what is to be sent to the printer and it can control the formatting of the printed page.

Maybe you are looking for