IWeb and Internet Explorer

Hi all,
I am a technician at a college, and we're using iWeb to publish websites for the students' coursework. Upon checking the health of the published pages, it is apparent that many of the students' work is not appearing in Internet Explorer correctly. Several of the images and text boxes are not appearing in the correct place and are overlapping.
So far browsing the forums a common answer appears to be 'Don't use Internet Explorer', however given that it is the world's most widely used web browser, and that we have no control over what browser the coursework moderators will be using when sample work is sent away, we are looking for a proper solution to this problem.
We are using intel-based macs with the latest version of iWeb and OSX.
Thanks in advance.
Message was edited by: carmel_college

Welcome to the Apple Discussions. Make sure you're using Web Safe Fonts and that text boxes are not overlapping or touching other text boxes or objects. Roddy's iWeb for Musicians has some good tips: How to get your iWeb Site to load in Internet Explorer. There may be some there that can help you.
The suggestion about suggestion and offering Firefox is a very good one. You'll help bring many of the students into the 21st century.
OT

Similar Messages

  • Problems with iweb and Internet Explorer

    I'm having trouble with my iweb website - PC users using Internet Explorer can access my site home-page but find the navigation bar is blocked - covered by a green rectangle which does not allow the links to be explored. With Safari and Firefox the website works properly. Has anyone else experienced this?

    Transparency (opacity in CSS) is one of those things that's used by those who know nothing about it or those who know a lot about and is best avoid by all the rest of us!
    To create a class "transparent" to cover all bets would require something like this...
    .transparent {
              /* Required for IE 5, 6, 7 */
              /* ...or something to trigger hasLayout, like zoom: 1; */
              width: 100%;
              /* Theoretically for IE 8 & 9 (more valid) */
              /* ...but not required as filter works too */
              /* should come BEFORE filter */
              -ms-filter:"progid:DXImageTransform.Microsoft.Alpha(Opacity=50)";
              /* This works in IE 8 & 9 too */
              /* ... but also 5, 6, 7 */
              filter: alpha(opacity=50);
              /* Older than Firefox 0.9 */
              -moz-opacity:0.5;
              /* Safari 1.x (pre WebKit!) */
              -khtml-opacity: 0.5;
              /* Modern!
              /* Firefox 0.9+, Safari 2?, Chrome any?
              /* Opera 9+, IE 9+ */
              opacity: 0.5;
    For modern browsers we can use this...
    .transparent {
              zoom: 1;
              filter: alpha(opacity=50);
              opacity: 0.5;
    But how do we know what our visitors are using?

  • Can anyone recommend a programmer that can fix iWeb for Internet Explorer?

    Can anyone recommend a programmer that can fix iWeb for Internet Explorer? I had one experienced source from GetaFreelancer.com who did a 17 page fix for $25. He would have done commented code for $40 so I could do the fixes myself afterward but he is not available right now. Guru.com yielded no comparable sources. Elance has a $50 minimum. All the other bids were in the hundreds of dollars without the commented code.

    The image on the right of your index page needs pulling down a bit, it looks messy covering the top banner.
    Secondly, you've changed quite a lot on your page so this makes life harder for everyone. For example, now at the bottom of the page in fireFox I see 'IP' on the line below the rest of the details, but because you changed things I now don't know whether that's because of my screen resolution or your coding. Is it still on one line for you?
    The problem with your columns may partly be based on the fact that you have a variety of span classes effectively achieving the same thing, and there are lots of unnecessary bits of code. How much of this is iWeb and how much is you I don't know. You've got an li class, a paragraph class, a written-out span class and some kind of specified bullet class all for one sentence. You only need one, maximum two of those things. Even if it's not conflicting and that's not the reason why it looks messed up, you'd do better to strip the code of all the unnecessary rubbish.
    To do this with help I recommend someone who is familiar with iWeb and has access to it in front of them. A professional programmer won't be able to help you, because they can't really tell which bits are generated by iWeb and which parts you can actually change.
    I recommend starting with a blank page and creating your columns and text without any styling other than bullets. Check it in both IE and FF. Then slowly begin to add your styling back in until you see if there's a problem. Finally, put the text on a (new) page which has your full website styling and see if there's a conflict between your page layout code and your page text code.

  • Remote Panel and Internet Explorer

    Hello. I have a problem with a Remote Panel and Internet Explorer. I create a measurement system in LabVIEW. It�s composed of a main front panel and a few subVIs with independent front panels opened from main Front Panel when I press appropriate button. As a local system everything works ok but I try to create a web version of this system. I decide that I can use a Remote Panel. In Web Publishing Tool I was creating a web page for each of Front Panel. I try to have the same functionality as in local system, so when in Front Panel (opened in Internet Explorer window) I press appropriate button I want to open secondary Internet Explorer window with a subVI inside. And now I�m stuck because I can�t open this secondary window in a network w
    orkstation. Has anyone have an idea how can I do it?

    > Hello. I have a problem with a Remote Panel and Internet Explorer. I
    > create a measurement system in LabVIEW. It?s composed of a main front
    > panel and a few subVIs with independent front panels opened from main
    > Front Panel when I press appropriate button.
    I think you have two options. You can open most modal subVI panels
    directly on a remote machine. The popup panels won't be in a web page,
    but it will work with few changes.
    A second approach would be to change the app slightly. The buttons that
    launch the subVIs will turn into URL links. The links will open a web
    page with a different embedded panel.
    Greg McKaskle

  • Problem with ACE and Internet Explorer 8

    I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
    exactly:
    ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
    If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
    I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
    Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
    Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
    Please help.

    Hi Kazik,
    Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
    I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
    A showtech from the Admin context of the ACE
    A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
    If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
    Regards
    Daniel

  • Problem with ExternalInterface.call and Internet Explorer

    Hi, I´m developing a site, (
    www.gen-studio.com/avelart2
    ), and I´m using a swf to display a set of thumbs that when
    clicked show an item and its description on the browser, those
    items might be images or video, everything works fine with the
    images.
    And actually it works fine with the videos too, when using
    Firefox, but when I test the page on Internet explorer it just
    doesn’t work!
    On principle let me describe how it´s supposed to work,
    a thumbnail when clicked sends an id number to javaScript using
    ExternalInterface.call(“myFunction”,myId); -I´m
    using AS3 for the swf´s-
    the javaScript file has already loaded (ever since$(
    document).ready) a XML file which uses to match the id with a file
    and the description, if the item to show it´s a video, then it
    creates a variable which holds a string with the proper html to
    embed a swf (a swf movie player that resides just next to the HTML
    file), when loaded, the swf movie player uses
    ExternalInterface.call() to ask for the source of the video that
    has to play, and that function is as follows:
    setVideo: function(){
    alert("hola");
    return comun.miVideo;
    (The alert(“hola”); is just to test that the
    function is being called), which it is, but it returns null as a
    value instead of the proper string, and this happens only on
    internet Explorer, but works correctly on Firefox.
    I´ve been reading all day about the subject and found a
    few interesting things, which though have made me narrow my
    problem, they haven´t just provided me with a solution, what I
    found so far:
    -I must have in account flash security issues: Checked (my
    actionScript follows:)
    import fl.video.*;
    import flash.external.ExternalInterface;
    flash.system.Security.allowDomain("*");
    var vid:FLVPlayback = this.miPlayer;
    vid.source =
    flash.external.ExternalInterface.call("comun.setVideo");
    -ExternalInterface and Internet explorer don´t work
    properly when tested locally: Checked (I have a server on my PC and
    I´m testing the site as well in the above direction).
    -The object tag holding the swf must have a proper id
    attribute: Checked.
    -It´s super important the way the object tag is formed:
    Checked, and I also tested the tag separately (I put it directly in
    the HTML instead of adding it via javaScript) and it worked as
    expected in both Firefox and Internet Explorer, which leads me to
    believe:
    -I read somewhere that if you add the object tag by using
    innerHTML or appendChild, returning values from javaScript to swf
    won´t work, but I couldn´t find an explanation nor a
    solution.
    Well, as I said now I´ve been looking all day for an
    answer, so I really hope you can help me or give me some advice on
    the subject, thank you so much for your time!

    Hi! it solved itself !! (nahh, I wish), but it indeed had a
    solution, it was something quite simple, and I don´t really
    understand why it was not working in the first place, but here is
    the thing:
    I´m learning jquery and this is the first proyect
    I´m officially using it, so I was using
    $('#myDIV').append("string"); to embed the swf, (and it was working
    perfectly on Firefox), so since I had narrowed my problem to those
    lines, I decided to try some good-old-fashioned-javaScript and
    changed it for: var myDiv =
    document.getElementById('thatParticularDiv'); myDiv.innerHTML =
    ('string'); and it worked both in Firefox and IE !!!!!! :)
    I´m quite happy about it, and if someone knows
    what´s the issue with my jquery approach I would love to hear
    it. THANKS !!

  • Swf link not working in Firefox, Opera and Internet Explorer but works in Safari

    Hi,
    I'm sorry but Im a real newbie and really need help!!!
    On the homepage of my website I have put a swf file that I linked to another page in my website through the div a href link and it displays great on safari and links, however in other browsers, when i try to click on it, it comes up with the link at the bottom of the browser (where it sometimes says Done), however it doesnt actually link, it jsut stays on the homepage.
    Here is the coding i put in:
    <div id="products2">
              <p>
              <a href="Our_brands/index.html">
                <script type="text/javascript">
    AC_FL_RunContent( 'codebase','http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0','wid th','449','height','449','title','Products','src','Productions/boxes3','quality','high','p luginspage','http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=Shockwav eFlash','movie','Productions/boxes3' ); //end AC code
              </script>
                <noscript>
                <object classid="clsid:D27CDB6E-AE6D-11cf-96B8-444553540000" codebase="http://download.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=9,0,28,0" width="449" height="449" title="Products">
                  <param name="movie" value="Our_brands/boxesnew.swf" />
                  <param name="quality" value="high" /><param name="SCALE" value="noborder" />
                  <param name="allowScriptAccess" value="always"/>
                  <embed src="Our_brands/boxesnew.swf" width="449" height="449" quality="high" pluginspage="http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFlash" type="application/x-shockwave-flash" allowScriptAccess="always" scale="noborder"></embed>
                  <br />
                  <br />
                </object>
                </noscript>
              </a>
              </p>
            </div>
    Could someone please tell me where I am going wrong?
    I would REALLY appreciate it.
    Thank you in advance!!

    I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
    Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
    So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
    Does that make any sense?
    Sorry if it doesn't.
    Thanks for the quick reply as well!!!

  • Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped

    Firefox has suddenly gone wrong. I was successfully running both Firefox and Internet Explorer 8 on Windows 7. My laptop is new and has plenty of RAM and HDD. I auto-accept upgrades including the most recent Firefox upgrade and the suggested upgrade to Adobe Flash 10.1. But after this, Firefox stopped working and does not work when I re-load Firefox 3.6. Also IE8 now works very slowly and does not locate major websites like Microsoft without a 'can't find the website message' and having to pressing Return a second time. When I do get to the Mozilla website and click on the button to try to download Firefox 3.6.6, I get this message "Oops! Internet Explorer could not find mozilla3.snt.utwente.nl". Can you help with what has gone wrong? As it stands, I can't use Firefox at all. Note: because Firefox did not work after the upgrade, I've downloaded the IE8 version of the Adobe Flash 10.1. What I really want is to be able to use both Firefox and IE8. But is this possible if they use different versions of Adobe Flash?
    == This happened ==
    Every time Firefox opened
    == About 2-3 days ago ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; Tablet PC 2.0; .NET4.0C)

    I have been having the same problem as the original poster. After upgrading to Ffx 3.6.6, the program asks you to upgrade to Flash Player Plugin 10.1. I download and installed 10.1 only to find videos weren't loading.
    In my case, the problem is the previous installation of Flash Player (9.0.47) was somehow messing things up. To fix this, because I already had Flash plugin 10.1 installed I had to uninstall 10.1 using the uninstaller from adobe and then manually remove any files related the old flash player plugin 9.0.47
    Here is a run-down of my process:
    0. To check if you have a previous installation of the Flash Plugin lurking around, in Firefox go to Tools -> Add-ons -> Plugins (tab). At this point you may seen both Flash plugins.
    1. Proceed to uninstall Flash Plugin 10.1. Adobe provides an uninstaller here: http://kb2.adobe.com/cps/141/tn_14157.html
    ( you have to make sure you have nothing running when you execute the installer).
    2. On my Mac (sorry I don't know what it is in Windows) I searched the hard drive for any files/folders with "Shockwave". I found a folder called "Shockwave 10". It wasn't removed by Adobe's uninstaller. For safety I deleted it and then emptied the trash.
    3. I then went to My HD -> Library -> Internet Plugins.
    Remove the file and folder named "Flash player.old"
    4. Restarted; ran the Adobe Flash Player 10.1 installer. Restarted again.
    5. Opened up ffx and double checked the plugins list (see step 1). Version 10.1 is installed and available. Went to problem sites to test it out and Success!
    Hope this helps.

  • Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

    HP Smart Web Printing has been replaced with HP Smart Printing.  It does support Windows 7 and IE 6 to IE9.  See this page for information.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • EntityEncodeStrings and Internet Explorer w/ CDATA in XML

    Hello.
    I'm makin a sort of content management system which fetches
    data from an XML file:
    (pages.xml)
    <pages>
    <page id="1">
    <title>Home</title>
    <link>#1</link>
    <content><![CDATA[<h3>Welcome"</h3><p>We're
    experimenting a lot with different stuff on this page, please bare
    with us.</p>]]></content>
    </page>
    <page id="2">
    <title>About</title>
    <link>#2</link>
    <content><![CDATA[<h3>about</h3>Woah,
    hold it there, punk.]]></content>
    </page>
    [etc...]
    </pages>
    My XHTML-file has this in the header:
    var nav = new Spry.Data.XMLDataSet("/pages.xml",
    "pages/page");
    nav.setColumnType("@id", "number");
    nav.setColumnType("content", "html"); // skips entity
    encoding \o/
    I want to display everything in the <content />-xml
    tree as (X)HTML
    With the code I have everything works perfectly in Firefox,
    but in Internet Explorer (7) I'm getting no data at all because of
    entityEncodeStrings not functioning correctly (or so it seems). If
    I remove this it displays in both Firefox and Internet Explorer
    (though with the entities encoded).
    It doesn't matter which way I do it, using the option
    entityEncodeStrings: false or -1 I get the same (non-)results.
    I'm very thankful for any help!

    http://labs.adobe.com/technologies/spry/samples/data_region/XMLDataSetStringHandlingSample .html

  • Java and Internet Explorer automation

    Hi,
    I would like to create a routine in java that would simulate a user browing the web.
    Ex: A user vistiting a certain page, clicking on a few links etc...
    Is their a java library that can server as a bridge beetween java and internet explorer in order to automate this process.
    Thank you.

    You want to see it all happening on the screen? If so, you could maybe look into IECanvas or some other Java/COM bridge that would let you embed IE in the Java app. I'm not sure what kind of API is available such that would allow for that.
    Another idea is java.awt.Robot which would let you move the mouse and enter text and click on things on any application, but the problem here is that you'd need to know exact coordinates to click on. You could use it to grab screen shots if you can deal with the image manipulation to figure out what is where.

  • Firefox and internet explorer doesnt work with mac os 10.4.7

    i can't seem to get firefox and Internet explorer to work on my g4 da mac with os 10.4.7. any suggestions...

    Did they ever work for you?
    Did you recently install some new software or make a hardware change to your machine?
    The first rule of thumb with misbehaving applications is to erase the Application's preferences and then try it again, but that might be somewhat dangerous considering that you could accidentally erase all of your bookmarks/favorites in the process.
    I'm running Mac OS 10.4.7 and I can get FireFox 1.07, 1.5, and 2.0, plus IE 5.2.3 to run, in addition to other browsers like Safari 2, OmniWeb 5.5, Netscape 7.2, and Opera 8.5 and 9.

  • Firefox and Internet Explorer crashes on startup

    Firefox and Internet Explorer both crash at startup. I have tried resetting Firefox but it still crashes. I click on the details box and nothing happens. They will both work fine when I boot up Windows in safe mode.
    bp-564f7898-b699-45de-83c6-5c8912130324

    Try to disable hardware acceleration in Firefox.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *https://hacks.mozilla.org/2010/09/hardware-acceleration/
    Try to update the graphic display driver.
    *https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers

  • Dynamic faces and Internet Explorer

    Thanks for taking a second to read my post, i hope you can help. I am almost complete with my web app using Netbeans VWP and Dynamic Faces. I have come across a simple application that i can not get working in Internet Explorer and as simple as it is I am surprised that it is not working. I cant believe that the Dynamic Faces team would just ignore compatability with IE altogether. Basically i am trying to get AJAX interaction going on by adding text into a textbox and adding a new DynaFaces.fireAjaxTransaction(this); to the submit however it does not seem to work. Maybe you can help...
    Here is my page:
    <?xml version="1.0" encoding="UTF-8"?>
    <jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page" xmlns:webuijsf="http://www.sun.com/webui/webuijsf">
        <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
        <f:view>
            <webuijsf:page binding="#{testies.page1}" id="page1">
                <webuijsf:html binding="#{testies.html1}" id="html1">
                    <webuijsf:head binding="#{testies.head1}" debug="true" id="head1">
                        <webuijsf:link binding="#{testies.link1}" id="link1" url="/resources/stylesheet.css"/>
                    </webuijsf:head>
                    <webuijsf:body binding="#{testies.body1}" focus="form1:layoutPanel1:textField1" id="body1" style="-rave-layout: grid">
                        <webuijsf:form binding="#{testies.form1}" id="form1">
                            <webuijsf:button actionExpression="#{testies.button1_action}" binding="#{testies.button1}" id="button1"
                                onClick="new DynaFaces.fireAjaxTransaction(this);" style="left: 144px; top: 110px; position: absolute" text="Button"/>
                            <webuijsf:staticText binding="#{testies.staticText1}" id="staticText1" style="position: absolute; left: 170px; top: 185px"/>
                            <webuijsf:textField binding="#{testies.textField1}" id="textField1" style="position: absolute; left: 75px; top: 55px"/>
                        </webuijsf:form>
                    </webuijsf:body>
                </webuijsf:html>
            </webuijsf:page>
        </f:view>
    </jsp:root>-------------------------------------
    Here is my backing bean:
    * testies.java
    * Created on July 10, 2007, 8:39 PM
    package mypkg;
    import com.sun.rave.web.ui.appbase.AbstractPageBean;
    import com.sun.webui.jsf.component.Body;
    import com.sun.webui.jsf.component.Button;
    import com.sun.webui.jsf.component.Form;
    import com.sun.webui.jsf.component.Head;
    import com.sun.webui.jsf.component.Html;
    import com.sun.webui.jsf.component.Link;
    import com.sun.webui.jsf.component.Page;
    import com.sun.webui.jsf.component.PanelGroup;
    import com.sun.webui.jsf.component.PanelLayout;
    import com.sun.webui.jsf.component.StaticText;
    import com.sun.webui.jsf.component.TextField;
    import javax.faces.FacesException;
    import javax.faces.component.html.HtmlPanelGrid;
    * <p>Page bean that corresponds to a similarly named JSP page.  This
    * class contains component definitions (and initialization code) for
    * all components that you have defined on this page, as well as
    * lifecycle methods and event handlers where you may add behavior
    * to respond to incoming events.</p>
    public class testies extends AbstractPageBean {
        // <editor-fold defaultstate="collapsed" desc="Managed Component Definition">
        private int __placeholder;
         * <p>Automatically managed component initialization.  <strong>WARNING:</strong>
         * This method is automatically generated, so any user-specified code inserted
         * here is subject to being replaced.</p>
        private void _init() throws Exception {
        private Page page1 = new Page();
        public Page getPage1() {
            return page1;
        public void setPage1(Page p) {
            this.page1 = p;
        private Html html1 = new Html();
        public Html getHtml1() {
            return html1;
        public void setHtml1(Html h) {
            this.html1 = h;
        private Head head1 = new Head();
        public Head getHead1() {
            return head1;
        public void setHead1(Head h) {
            this.head1 = h;
        private Link link1 = new Link();
        public Link getLink1() {
            return link1;
        public void setLink1(Link l) {
            this.link1 = l;
        private Body body1 = new Body();
        public Body getBody1() {
            return body1;
        public void setBody1(Body b) {
            this.body1 = b;
        private Form form1 = new Form();
        public Form getForm1() {
            return form1;
        public void setForm1(Form f) {
            this.form1 = f;
        private TextField textField1 = new TextField();
        public TextField getTextField1() {
            return textField1;
        public void setTextField1(TextField tf) {
            this.textField1 = tf;
        private Button button1 = new Button();
        public Button getButton1() {
            return button1;
        public void setButton1(Button b) {
            this.button1 = b;
        private StaticText staticText1 = new StaticText();
        public StaticText getStaticText1() {
            return staticText1;
        public void setStaticText1(StaticText st) {
            this.staticText1 = st;
        // </editor-fold>
         * <p>Construct a new Page bean instance.</p>
        public testies() {
         * <p>Callback method that is called whenever a page is navigated to,
         * either directly via a URL, or indirectly via page navigation.
         * Customize this method to acquire resources that will be needed
         * for event handlers and lifecycle methods, whether or not this
         * page is performing post back processing.</p>
         * <p>Note that, if the current request is a postback, the property
         * values of the components do <strong>not</strong> represent any
         * values submitted with this request.  Instead, they represent the
         * property values that were saved for this view when it was rendered.</p>
        public void init() {
            // Perform initializations inherited from our superclass
            super.init();
            // Perform application initialization that must complete
            // *before* managed components are initialized
            // TODO - add your own initialiation code here
            // <editor-fold defaultstate="collapsed" desc="Managed Component Initialization">
            // Initialize automatically managed components
            // *Note* - this logic should NOT be modified
            try {
                _init();
            } catch (Exception e) {
                log("testies Initialization Failure", e);
                throw e instanceof FacesException ? (FacesException) e: new FacesException(e);
            // </editor-fold>
            // Perform application initialization that must complete
            // *after* managed components are initialized
            // TODO - add your own initialization code here
         * <p>Callback method that is called after the component tree has been
         * restored, but before any event processing takes place.  This method
         * will <strong>only</strong> be called on a postback request that
         * is processing a form submit.  Customize this method to allocate
         * resources that will be required in your event handlers.</p>
        public void preprocess() {
         * <p>Callback method that is called just before rendering takes place.
         * This method will <strong>only</strong> be called for the page that
         * will actually be rendered (and not, for example, on a page that
         * handled a postback and then navigated to a different page).  Customize
         * this method to allocate resources that will be required for rendering
         * this page.</p>
        public void prerender() {
         * <p>Callback method that is called after rendering is completed for
         * this request, if <code>init()</code> was called (regardless of whether
         * or not this was the page that was actually rendered).  Customize this
         * method to release resources acquired in the <code>init()</code>,
         * <code>preprocess()</code>, or <code>prerender()</code> methods (or
         * acquired during execution of an event handler).</p>
        public void destroy() {
         * <p>Return a reference to the scoped data bean.</p>
        protected ApplicationBean1 getApplicationBean1() {
            return (ApplicationBean1)getBean("ApplicationBean1");
         * <p>Return a reference to the scoped data bean.</p>
        protected RequestBean1 getRequestBean1() {
            return (RequestBean1)getBean("RequestBean1");
         * <p>Return a reference to the scoped data bean.</p>
        protected SessionBean1 getSessionBean1() {
            return (SessionBean1)getBean("SessionBean1");
        // Get the text from the textbox and set it in the staticTextField
        public String button1_action() {
            String str = (String)textField1.getValue();
            staticText1.setText(str);
            return null;
    }Any help is appreciated. thx.
    Message was edited by:
    b12s

    > Hello. I have a problem with a Remote Panel and Internet Explorer. I
    > create a measurement system in LabVIEW. It?s composed of a main front
    > panel and a few subVIs with independent front panels opened from main
    > Front Panel when I press appropriate button.
    I think you have two options. You can open most modal subVI panels
    directly on a remote machine. The popup panels won't be in a web page,
    but it will work with few changes.
    A second approach would be to change the app slightly. The buttons that
    launch the subVIs will turn into URL links. The links will open a web
    page with a different embedded panel.
    Greg McKaskle

  • SWF Object and Internet Explorer

    I am experiencing some strange behavior with a SWF Im including in the following web page:
    http://www.bostonredevelopmentauthority.org/
    The SWF displays properly on the first page visit in both Internet Explorer and Firefox.  If I navigate away to a child page, then back with the back button in the browser, the SWF no longer displays in IE.  Firefox does not exhibit this behavior.
    Any ideas what might be going on here?
    Thanks,
    Greg

    I'm doing it for a client and they dont want it put up on the server yet, I wish I could put it up bc I have no idea what I'm doing!
    Basically I wanted a swf file from Flash to display a range of products (I have turned all the products into buttons) and then I put coding into all the buttons to on release getURL which work in the swf file, however when I put the swf file into dreamweaver, the buttons worked in hover state, but the action scripting didn't work to link the swf file to another page in the website (the index in Our_brands folder).
    So i decided to make it link to the index.html in Our_brands folder from wrapping the swf box in a div tag and linking the div tag <a href="Our_brands/index.html"> which links it great in Safari but wont link in Firefox, Opera and Internet Explorer.
    Does that make any sense?
    Sorry if it doesn't.
    Thanks for the quick reply as well!!!

Maybe you are looking for